Problem using HP LaserJet 5M with AEBS

HISTORY:
Well over a year ago I was able to add a 5M printer to the LAN port of my AEBS and print wirelessly using first a G4 PB and later a G4 mini. This is my only printer. It showed up every time I hit Cmd-P. So easy/convenient. Recently I migrated to a Intel duo mini and found I could not print using the laserJet 5M. Talked to Apple Tech Support and they said I would need to wait until HP wrote a new Intel Duo-based driver. Yeeps!
WHAT I CAN/CANNOT DO:
Went back to the Printer Setup Utility and did considerable experimentation (tried different settings). No luck getting the new mini to print via the AEBS.
However, I did get it to print when I connected the HP 5M directly to the mini using an ethernet cable. However this is both inconvenient and lame as I frequently use a variety of computers.
It feels to me like I'm very close to successful wifi printing with this configuration. Any suggestions would be appreciated.

Was finally, on my own, able to get the laserJet to print when it was connected to the LAN port of the AEBS using the Intel Duo mini.
Required a lot of trial and error. So it is possible even though AppleCare said impossible.

Similar Messages

Is it possible to use HP Laserjet P1005 with OS X Mavericks? If not which HP printers can I use?

Is it possible to use HP Laserjet P1005 with OS X Mavericks? If not which HP printers can I use now?

https://discussions.apple.com/message/23481997#23481997
You can also check the HP web site for drivers.
HP Support
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4159&lc=en&cc=us&dlc=en&s w_lang=&product=3435676

Having problems using ion tape express with itunes cannot find the song on hard drive

Having problems using ION tape express with itunes. The song is on hard drive as temp1 not the name of the song. And I have problems playing it in itunes
because it says it cannot locate the song'

Then correct the name of the song or point iTunes to the new file.
Issues with restoring should be directed to the manufacturer of the backup software/device... this is not an Apple or iTunes issue.

Calendar Server 3.5: Problem using user's ID with uniuser -mod command

When there are two users who have the same Common Name (CN) in LDAP but
different User ID's (uid
field), I have a problem using the uid
field as an argument to
uniuser -mod in Netscape Calendar
Server (NCS) 3.5. For example, there may be two users, User1 and User2, who
both have the CN "John Smith." 

User1
uid: jsmith2
sn: Smith
givenname: John
nscalxitemid: 10001:00314
User2
uid: jsmith
sn: Smith
givenname: John
nscalxitemid: 10001:00213

Let's say I want to change the value for nsCalOrgUnit2
for User1 to "jsmith." In NCS 4.0,
I can specify the uid as
an argument to uniuser -mod
. However, in NCS 3.5, if I specify the
uid as an argument to
uniuser -mod, the entry
for the user does not get changed. 

Calendar Server 4.0 

%uniuser -mod "ID=00314" -m "OU2=jsmith/OU3=People" -n 10001
 
uniuser: modified "Smith, John" 

(The LDAP entry for User1 also reflects this change.)

Calendar Server 3.5 

%uniuser -mod "ID=00314" "OU2=jsmith/OU3=People" 10001
 
uniuser: no need to modify "Smith,John" 

(The LDAP entry for User1 does not reflect the change.) 

%uniuser -mod "S=Smith/G=John/ID=00314" "OU2=jsmith/OU3=People"
10001 
uniuser: no need to modify "Smith,John" 

(The LDAP entry for User1 does not reflect the change.) 

If I use the command uniuser -mod "S=Smith/G=John"
"OU2=jsmith/OU3=People" 10001
in NCS 3.5, the script will change the entry of the first "John Smith" in the
database and will cause the LDAP entry for this user to be updated as well.
However, the entry modified may or may not be the correct one. So, in
NCS 3.5, is there a way to specify a particular uid
to ensure that the correct LDAP entry
is modified?

To modify a user's information using the uid
field in Calendar Server 3.5, change
the user.ini file. The
following steps show how to change a user's information by modifying the
.ini file: 

<OL>
<LI>Open the user.ini
file, which is in the path /users/unison/misc/user.ini

<LI>Add a section containing the desired changes. For example, 

[Test] 
OU2 = jsmith 
OU3 = People 

<LI>Run uniuser with
the following options: 

% uniuser -mod "ID=00314" -s Test 10001
</OL>

It turns out to be a problem with the user Keychain. It has some weird entry that was sending the wrong password. I delete all entries to the server and that corrected the problem

Problems using OS10.9.2 with migration assistant to transfer files from imac with OS10.6.8

Having problems using the Migration assistant on a new imac with OS10.9.2 to transfer files from an old imac with OS 10.6.8.

The Migration Assistant can transfer files from a computer running Mac OS X 10.1 or newer, but shouldn't be used to migrate applications from a PowerPC Mac to an Intel Mac.
(35788)

Problem using Instant Client 10g with PHP4.3.10-16 on Debian Sarge

Hello,
My current email is [email protected]
I am trying to use PHP on Debian box using Oracle 10gR2 on a RH 4 server. Everything works fine individually, but I cannot get PHP4 to use InstantClient to connect to the Oracle Server. This is what I've done:
Oracle 10gR2 works fine on the RH 4 server. Listener is running and all required OS security is in place and works (TCP_wrappers, etc.).
Client machine runs Debian 3.1 (Sarge). It works fine and SSH connectivity to RH4 server works.
Instant Client 10gR2 installed on Debian client and works fine. Tested SQL*Plus connection to the RH server. I installed Instant Client from the zip file.
I did have to add libclntsh.so to /etc/ld.so.conf and run ldconfig to get Debian to use it, though.
Apache2.0.54-5 on Debian client works fine. Web pages on it can be opened in browsers from other machines.
Installed PHP4.3.10-16 on Debian client using following:
./configure --with-oci8-instant-client=<dir of my choice>
--enable-sigchild
I first checked ./configure help and the option with-oci8-instant-client was there.
Configure went well. Log showed checking for Instant Client files.
Ran make. Saw numerous Instant Client message as words scrolled.
Ran make install. Successful.
Restarted Apache2 with following env variables:
LD_LIBRARY_PATH=<my Instant Client directory)
TNS_ADMIN=<same directory where I put my sqlnet.ora and tnsnames.ora files).
SQLPATH=<same directory>
I know this is correct because Instant Client SQL*Plus can connect.
Browsers on other machines can view simple php scripts run from the Debian box.
BUT, phpinfo does NOT show an OCI8 section.
phpinfo does show the correct extension directory, though.
Somehow, my PHP4 configure and make is not using the --with-oci8-instant-client option.
I checked $PHP4HOME/ext/oci8/config.m4 file and the verbiage IS in there to use the --with-oci8-instant-client option, either with the default location or the extension_dir location.
I tried using the new ZendCore product, even though it is not certified for Debian. It installed okay but I could not get PHP5 to work. I uninstalled it successfully and redid all of the above.
So, any ideas as to what else I can do here? Other than not use Debian (which is probably the wisest thing to do). And I suppose I could install a thick Oracle client, assuming that Debian would take it. But I prefer the Instant Client.
I tried the PHP ./configure syntax I've seen several places on this forum.
./configure --with-oci8=instantclient,<directory>
This syntax may work on Red Hat machines but it throws a syntax error on Debian and aborts the configure.
Thanks for any help.

Thanks, but that did not work. Configure aborts because it cannot find the required OCI8 libraries. The --with-oci8 option is for the Oracle "thick" client. I have only the Instant Client...and am not interested in loading the older client.
I may have my own solution next week, though. I will be loading RH4 on a new server and will then install ZendCore and forget all about using Oracle with Debian.
Update on trying ZendCore on Debian Sarge:
I tried installing it again yesterday. The install seemed go to well, and said it was successful.
It did NOT load PHP5, however. Nor did it load the Instant Client. My previously installed PHP4 and Instant Client remained in my original directories.

Problem using extension manager CS5 with command line

Hi All,
I had posted my question here : http://forums.adobe.com/message/4695419#4695419, but was advised to do so here as well..
I have a requirement to get the path of all the installed Extension Managers on any Windows system for the purpose of installing an extension.. I thought, there would be no problem in getting the path from the registry. There was no problem in Win XP, but the same does not work for Win 7.. I googled, and found alternate ways to get the path.
Here is the link : http://forums.adobe.com/thread/851359. I followed the instructions in this post, but failed to get this working for CS5 as mentioned in my previous thread... No problem for CS5.1 and CS6.. Why is that?
I want to get this working for CS5, CS5.1, CS6... How can I get the path of all the Extension Manager versions installed on a Windows system?
Please refer to the following screenshots to get a better understanding of my problem,
I created a jsx file named "Result.jsx", which I saved in my D drive, with the following code,
resultFile = new File("D:/result.log");
resultFile.open("w");
resultFile.write(BridgeTalk.__diagnostics__);
resultFile.close();
If I run this directly from ESTK CS5, there is no problem, and I get the result.log file. I tried to execute this script via command line as shown in the screenshot,
On executing the above, I got the following error,
What is going wrong?
Please help!

I am sorry for the poor documentation of Extension Manager which causes you so much trouble.
1. You can use BridgeTalk API to ask specific version of Extension Manager to do something. There is sample in packaging_extension.pdf about this. You don't need to know the installation path of Extension Manager. One thing to note is that the value of bt.target is version specific, i.e. "exman-5.0", "exman-5.5" send this message to different version of Extension Manager, so you can change this value to install/enable/disable/remove extensions using different version of Extension Manager. More detailed documentation of BridgeTalk can be found by clicking "Help" menu then clicking "Javascript Tools Guide CS5" in "Adobe ExtendScript Toolkit CS5".
2. Specific version of Extension Manager only manage extensions for corresponding version of product. You should use Extension Manager CS5 to install extensions for Photoshop CS5. The reason that the extension you installed for Photoshop CS5.1 using Extension Manager CS5.5 is displayed for Photoshop CS5 in Extension Manager CS5 is that two versions of Photoshop specified the same directory for Extension Manager to manage extensions. This is a defect and will cause some problems if multiple versions of Photoshop co-existed in one machine. But "to find previous (CS5) extension manager and to enable it" should work for you, I guess you use command line to enable it and specify wrong product name (see #3) so that it doesn't work.
3. When using command line, you should specify "product" attribute with the name displayed at the left panel of Extension Manager. So "Photoshop CS5 32" is correct. Remember to enclose it with double quote because of existence of space character.
4. As above mentioned, use display name of Photoshop, and call proper version of Extension Manager by BridgeTalk.

Unusual problem using Arial Black font with #'s

We have encountered a rather unusual problem.
Recently one of our customers contacted us about a problem with their job. They used #'s in arial black and regular throughout their document. Everywhere the #'s were in Arial Black they came out looking like an entirely different font. All of the files that we have created from their document appear correctly. Even the proofs created from the files printed correctly. However at the point of Esko's Nexus program creating the tiff file to make the press plates we are getting the incorrect results. I have even created a new document using our fonts in multiple sizes and I am getting the same results. As you can see the rest of the text in the same font is imaging properly. It is only the #'s that are the problem.
This is a screen capture of the PDF I created:
This is a screen capture of the results from the plate tiff image:
I am positive that it is not an issue with Esko's Nexus software as I have recreated this text in Quark, Miccrosoft Word, and Microsoft Publisher and they all imaged properly.
I am only encountering this with Adobe software. I am getting the same results from both InDesign and Illustrator. I have run the file from multiple Macs with various OS systems and from a PC each with their own font sets. I have even run the file from all versions of InDesign that we own (CC2014, CC, CS6, CS5.5) and they ALL give me incorrect results. As you can see from the images above it is ONLY the # character in Arial Black that is a problem.
I'm at a loss as to how to solve this problem.
Larry Meirndorf
BRD Printing
Prepress Supervisor

Images of full font set:
Correct from Quark:
Incorrect from InDesign:

Problems using sprites in CM with Firefox

Hi,
Iu2019m tying to improve Portal Performance, improving XMLForms content, so decided to reduce the number of requests (images) using sprites, the problem is, for some reason, that I canu2019t understand, attribute u201Cbackgroundu201D or u201Cbackground-imageu201D, are being suppressed by the XMLForms XSLT Pipeline in Firefox, not in IE.
Example:
Using Firefox, create a new Content using a XMLForm with an HTML Editor in the model, in Firefox, this HTML Editor is replaced by a Textarea, insert something like u201C<A id=A20091013169500 title="Gripe A (H1N1)" style="DISPLAY: block; BACKGROUND: url(/irj/go/km/docs/documents/Images/destaques.gif) 0px 0px; WIDTH: 215px; HEIGHT: 50px" href="http://portaldev.tduarte.pt/irj/portal/tduarte/Contacte-nos" target=_top></A>u201D (use an image in your CM), after saving, the image is not being displayed, and after inspecting the element with firebug, I can see the attribute background was completely removed.
Thanks & Regards,
John

Hi Tobias,
Thanks for the tip, it is valuable, but I already knowed from u201CHow to Tune the Performance of Knowledge Management (NW7.0)u201D, it improves the download, but does not reduce the number of requests.
Besides this, what is the reason for working in IE and not in Firefox?
Besides all the above mentioned points, it is not possible to apply a cache, because Iu2019m talking about an iView of Highlights in the first page, that changes constantly, without a timebase defined.
Thanks & Regards,
John

Problem using multiple choice LOV with custom attribute in IAS 10.1.2.0.2

Hi
When aplying a multiple choice and selecting multiple selection and saving in the content area , everything looks fine .
However when looking at the page the selection is only the first one selected and not the miltiple choices I made
can someone tell me what is going on , does the miltiple selection with custom attribute
works ??
thanks in advance
Igal

Hi there,
I don't really understand what you're doing but I used lot of LOV in custom attributes on my custom items and everything works fine.
Can you explain more your problem ?

Problem using 2 Fact tables with the same dimension

Hi,
I have noticed a very strange behaviour in Presentation Services / BI Administrator. I have 2 cubes (created in OWB) which are in the same business model, they are set up with foreign keys etc. and works as they should using them separately. Problem is (sometimes!) when I want to use the common dimension (Project) against both of the fact tables (Sales Order and Purchase Order).
Scenario 1:
If I use Project Id, Purchase Amount, Sales Amount I get either an amount in Sales Amount or in Purchase Amount, BUT if the Project Id starts with a letter (not starting with a number) it will show the correct amount for both Sales- and Purchase Amount.
Scenario 2:
I use Project Description (even followed by Project Id or not), Sales Amount, Purchase Amount I get the correct numbers for all projects. Project Description must come before Project Id or else it will not work.
I only noticed this problem when using both of the Fact tables since I want to compare Sales Amount and Purchase Amount in each Project. The Dimension for Project consist of Project, Sub Project and Activity and works fine. If I only use Sales Amount or Purchase Amount with Project Id I don't get this error. Only when both numbers are used.
I would be very happy if anyone have a good solution/explanation to this problem! Seems like could be something in the BI Server memory that goes wrong somewhere.

The strange thing is that the results from the queries are correct running them in SQL Developer. This is one that works:
SELECT Project.Project saw_0, "- SalesOrderFact"."Sales Amount" saw_1, "- PurchaseOrderFact"."Purchase Amount" saw_2, REPORT_SUM(saw_1 BY ), REPORT_SUM(saw_2 BY ) FROM SalesOrder ORDER BY saw_0
SALES ORDER:
select T3032.PROJECT_DESCRIPTION as c1,
sum(T161.SALES_AMOUNT_LOCAL) as c2
from
DIM_PROJECT_V T3032,
CUBE_SALES_ORDER T161
where ( T161.DIM_PROJECT = T3032.DIMENSION_KEY )
group by T3032.PROJECT_DESCRIPTION
order by c1
PURCHASE_ORDER:
select T3032.PROJECT_DESCRIPTION as c1,
sum(T3020.TOTAL_BUY_AMOUNT) as c2
from
DIM_PROJECT_V T3032,
CUBE_PURCH_ORDER T3020
where ( T3020.DIM_PROJECT = T3032.DIMENSION_KEY )
group by T3032.PROJECT_DESCRIPTION
order by c1
And this will give the wrong result in Answers (correct in SQL..):
SELECT Project."Project Id" saw_0, "- SalesOrderFact"."Sales Amount" saw_1, "- PurchaseOrderFact"."Purchase Amount" saw_2, REPORT_SUM(saw_1 BY ), REPORT_SUM(saw_2 BY ) FROM SalesOrder ORDER BY saw_0
SALES_ORDER:
select T3032.PROJECT_KEY_NAME_ID as c1,
sum(T161.SALES_AMOUNT_LOCAL) as c2
from
DIM_PROJECT_V T3032,
CUBE_SALES_ORDER T161
where ( T161.DIM_PROJECT = T3032.DIMENSION_KEY )
group by T3032.PROJECT_KEY_NAME_ID
order by c1
PURCHASE_ORDER:
select T3032.PROJECT_KEY_NAME_ID as c1,
sum(T3020.TOTAL_BUY_AMOUNT) as c2
from
DIM_PROJECT_V T3032,
CUBE_PURCH_ORDER T3020
where ( T3020.DIM_PROJECT = T3032.DIMENSION_KEY )
group by T3032.PROJECT_KEY_NAME_ID
order by c1
As you can see the SQL look very familiar, and I cannot see anything in SQL that should be the cause of this error. I think the error must be in the BI Memory or something.
Any ideas?

Midi connecting problems: using Logic Express 9 with MBox 2 interface and a Mac OSX 10.6.8

I have a Mac OSX and I use Logic Express 9 on it. I also use an MBox 2 digidesign. Im having trouble connecting midi and getting it to work from my Roland Keyboard Midi, to the back of my Mbox 2 Midi. Its just not working at all. Does anyone know how to make Midi work with the Mbox 2 using Logic Express 9 on my OSX 10.6.8

Troubleshooting Wi-Fi issues in OS X
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)
Also try turning off Bluetooth

Problem using 2 separate computers with iPhoto

My friend and I have both upgraded to iPhoto 6. We have a problem when she brings a CD of her images to my house. When I load them to my computer I can view them regularly in iPhoto 6. However, when we try to view a slideshow and it gets to her photos, and her photos only, there is a gray screen with a light gray dashed square outline representing the image and it has an exclamation point or question mark in the middle (can't remember which). Also, when I try to export her images to my desktop it will not work.
Has anyone had this problem? I've already rebuilt my thumbnails which didn't help.

Deborah:
The gray screen and exclamation point indicates that iPhoto cannot find the image file that should be displayed. How is your friend burning the disk? It should be via the Share->Burn menu. Then the disk will mount in your iPhoto like this. You can select an album that she created and burned and run a slideshow off of it.
Her disk should look like this with the full sized image files in the Originals folder. You can check to see if they are there.
If the disk was created by exporting the files via the File->Export->File Export menu option then they would have to be imported into your iPhoto library for you to view them in iPhoto or use in a slideshow.
Do you Twango?

Problems using JavaMail and activation with Java 1.6

Hi,
I have developed an application with a SOAP architecture using Axis. Everything worked fine until I upgrade the JRE version from 1.5 to 1.6. Since then a "javax.activation.UnsupportedDataTypeException: no object DCH for MIME type multipart/related; type="text/xml" " exception is thrown every time I try to connect to the webservices.
Debugging the code I've found that the problem is a null value in the "dch" attribute of the ObjectDataContentHandler object returned by the getInputStream method in the DataHandler class.
When I launch the application using JRE 1.5 this attribute value is "text_plain" and everthing woks ok but when I launch it with JRE 1.6 the attribute has a wonderful "null" value...
Anybody knows what could be the reason for that "null" value?
I've looking for this problem in diferent forums and I believe that could be some kind of incompatibility between the activation version provided with the JRE 1.6 and the JavaMail 1.4 version but I'm not sure.
Thanks in advance!

My application also stopped working and sadly is a production application (is in a production environment and production depends heavily on it since it contains Standard Operation Procedures documents).
I've tried so far uninstalling jre 1.6 from server, opening the jnlp with jre 1.5.13 and nothing yet. the curious thing is that the jre 1.6 update took place some time ago and today I'm getting the error. Not sure i the server went down recently which might explain some of it.
Here's my error:
java.lang.reflect.InvocationTargetException
 at sun.reflect.GeneratedConstructorAccessor4.newInstance(Unknown Source)
 at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
 at org.apache.axis.Message.setup(Message.java:352)
 at org.apache.axis.Message.<init>(Message.java:235)
 at org.apache.axis.transport.http.HTTPSender.readFromSocket(HTTPSender.java:779)
 at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:144)
 at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
 at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
 at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
 at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165)
 at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
 at org.apache.axis.client.Call.invoke(Call.java:2767)
 at org.apache.axis.client.Call.invoke(Call.java:2443)
 at org.apache.axis.client.Call.invoke(Call.java:2366)
 at org.apache.axis.client.Call.invoke(Call.java:1812)
 at com.bluecubs.xinco.client.XincoExplorer.doDataWizard(XincoExplorer.java:2788)
 at com.bluecubs.xinco.client.XincoExplorer$8.mousePressed(XincoExplorer.java:1437)
 at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:263)
 at java.awt.Component.processMouseEvent(Component.java:6035)
 at javax.swing.JComponent.processMouseEvent(JComponent.java:3265)
 at java.awt.Component.processEvent(Component.java:5803)
 at java.awt.Container.processEvent(Container.java:2058)
 at java.awt.Component.dispatchEventImpl(Component.java:4410)
 at java.awt.Container.dispatchEventImpl(Container.java:2116)
 at java.awt.Component.dispatchEvent(Component.java:4240)
 at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4322)
 at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3983)
 at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3916)
 at java.awt.Container.dispatchEventImpl(Container.java:2102)
 at java.awt.Window.dispatchEventImpl(Window.java:2429)
 at java.awt.Component.dispatchEvent(Component.java:4240)
 at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
 at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:273)
 at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:183)
 at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:173)
 at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
 at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
 at java.awt.EventDispatchThread.run(EventDispatchThread.java:121)
Caused by: Error reading data stream: Error in MIME data stream, start boundary not found, expected: ------=_Part_5_13931643.1192823865125
 at org.apache.axis.attachments.MultiPartRelatedInputStream.<init>(MultiPartRelatedInputStream.java:339)
 at org.apache.axis.attachments.AttachmentsImpl.<init>(AttachmentsImpl.java:119)
 ... 39 more
AxisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException
faultSubcode:
faultString: java.lang.RuntimeException
faultActor:
faultNode:
faultDetail:
 {http://xml.apache.org/axis/}stackTrace:java.lang.RuntimeException
 at org.apache.axis.Message.setup(Message.java:361)
 at org.apache.axis.Message.<init>(Message.java:235)
 at org.apache.axis.transport.http.HTTPSender.readFromSocket(HTTPSender.java:779)
 at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:144)
 at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
 at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
 at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
 at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165)
 at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
 at org.apache.axis.client.Call.invoke(Call.java:2767)
 at org.apache.axis.client.Call.invoke(Call.java:2443)
 at org.apache.axis.client.Call.invoke(Call.java:2366)
 at org.apache.axis.client.Call.invoke(Call.java:1812)
 at com.bluecubs.xinco.client.XincoExplorer.doDataWizard(XincoExplorer.java:2788)
 at com.bluecubs.xinco.client.XincoExplorer$8.mousePressed(XincoExplorer.java:1437)
 at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:263)
 at java.awt.Component.processMouseEvent(Component.java:6035)
 at javax.swing.JComponent.processMouseEvent(JComponent.java:3265)
 at java.awt.Component.processEvent(Component.java:5803)
 at java.awt.Container.processEvent(Container.java:2058)
 at java.awt.Component.dispatchEventImpl(Component.java:4410)
 at java.awt.Container.dispatchEventImpl(Container.java:2116)
 at java.awt.Component.dispatchEvent(Component.java:4240)
 at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4322)
 at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3983)
 at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3916)
 at java.awt.Container.dispatchEventImpl(Container.java:2102)
 at java.awt.Window.dispatchEventImpl(Window.java:2429)
 at java.awt.Component.dispatchEvent(Component.java:4240)
 at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
 at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:273)
 at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:183)
 at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:173)
 at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
 at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
 at java.awt.EventDispatchThread.run(EventDispatchThread.java:121)
 {http://xml.apache.org/axis/}hostname:PRAII1371900
java.lang.RuntimeException
 at org.apache.axis.AxisFault.makeFault(AxisFault.java:101)
 at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:154)
 at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
 at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
 at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
 at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165)
 at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
 at org.apache.axis.client.Call.invoke(Call.java:2767)
 at org.apache.axis.client.Call.invoke(Call.java:2443)
 at org.apache.axis.client.Call.invoke(Call.java:2366)
 at org.apache.axis.client.Call.invoke(Call.java:1812)
 at com.bluecubs.xinco.client.XincoExplorer.doDataWizard(XincoExplorer.java:2788)
 at com.bluecubs.xinco.client.XincoExplorer$8.mousePressed(XincoExplorer.java:1437)
 at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:263)
 at java.awt.Component.processMouseEvent(Component.java:6035)
 at javax.swing.JComponent.processMouseEvent(JComponent.java:3265)
 at java.awt.Component.processEvent(Component.java:5803)
 at java.awt.Container.processEvent(Container.java:2058)
 at java.awt.Component.dispatchEventImpl(Component.java:4410)
 at java.awt.Container.dispatchEventImpl(Container.java:2116)
 at java.awt.Component.dispatchEvent(Component.java:4240)
 at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4322)
 at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3983)
 at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3916)
 at java.awt.Container.dispatchEventImpl(Container.java:2102)
 at java.awt.Window.dispatchEventImpl(Window.java:2429)
 at java.awt.Component.dispatchEvent(Component.java:4240)
 at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
 at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:273)
 at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:183)
 at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:173)
 at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
 at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
 at java.awt.EventDispatchThread.run(EventDispatchThread.java:121)
Caused by: java.lang.RuntimeException
 at org.apache.axis.Message.setup(Message.java:361)
 at org.apache.axis.Message.<init>(Message.java:235)
 at org.apache.axis.transport.http.HTTPSender.readFromSocket(HTTPSender.java:779)
 at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:144)
 ... 32 moreAnd the related code:
Message m = null;
 MessageContext mc = null;
 AttachmentPart ap = null;
 Call call = (Call)xincoClientSession.xinco_service.createCall();
 call.setTargetEndpointAddress(new URL(xincoClientSession.service_endpoint));
 call.setOperationName(new QName("urn:Xinco", "downloadXincoCoreData"));
 Object[] objp = new Object[2];
 objp[0] = (XincoCoreData)newnode.getUserObject();
 objp[1] = xincoClientSession.user;
 //tell server to send file as attachment
 //(keep backward compatibility to earlier versions)
 ap = new AttachmentPart();
 ap.setContent(new String("SAAJ"), "text/string");
 call.addAttachmentPart(ap);
 //invoke actual call
 byte_array = (byte[])call.invoke(objp);
 //get file from SOAP message or byte array
 mc = call.getMessageContext();
 m = mc.getResponseMessage();
 if (m.getAttachments().hasNext()) {
 ap = (AttachmentPart)m.getAttachments().next();
 in = (InputStream)ap.getContent();
 } else {
 in = new ByteArrayInputStream(byte_array);
 }The stack trace point the error to the line:
*byte_array = (byte[])call.invoke(objp);*
Edited by: javydreamercsw on Oct 19, 2007 1:08 PM

Problem Using Single Sign on with Deployed Applications

I have deployed some appliciations to a standalone OC4J. I am using Identity Management for authentication and it works unless I check the Single Sign on box here:
OC4J
Administration ->
Security Provider->
Enable SSO Authentication
I receive this error:
499 Oracle SSO
Oracle SSO
(all my products are version 10.1.1.3)
I guess I should run ssoreg and osso1013. I can't find the latter.
I appreciate any comment.
Regards,
Farbod

Dear John,
from my point of view, we have to seperate the problem in two parts:
1.) The automatic logon to the struts application via SSO.
2.) The session sharing via some J2EE mechanism.
For the SSO (1.) You have to logged on to the portal - with a cookie on the clientside. This cookie can be used for SSO by Your Struts application as long as You share the same session (same browserinstance). This is not difficult examples are available.
The sessionsharing between a J2EE aap - Struts and an iView is an intersting point. I hope I can get some time to try this out. One trick which is not too clever is to store the session data serialized in a database and privide the sessionid in the url which calls the iView or Struts. Sessionsharing between iViews is no problem as long as You use the HTTPSession.
Walter

Problem using HP LaserJet 5M with AEBS

Similar Messages

Maybe you are looking for