Problem using Iphone 3G with 2009 Honda Fit

Have a 2009 Honda Fit Sport (without Nav). Iphone interface worked fine until updated to 3.0. Now, I can't choose albums or songs...just playlists. It will also no longer let me access my podcasts. Was not fixed when updated to 3.1. Any suggestions other than reverting back to an older OS?

After almost 1 week of sheer frustrations, I have been unable to connect my Iphone 3G to my exchange server at work.
I have tried probably every method discussed here, including restoring my iphone 3G several times. My issue has been elevated all the way up to apple engineering, and still no solution.
It appears that the issue is that I cannot connect because my company is using Exchange server 2003 with SP1.
I can connect any Windows Smartphone or Pocket PC and it will sync in what seems seconds….very fast. I have used windows phones connected to our server for more than 4 years, never an issue.
My company has the attitude of we “We don’t want you to connect, you are lucky to be able to use active sync on windows phones!!” So their change is not probable.
Has anyone found a way to connect Iphone 3G to an Exchange Server 2003, SP1?

Similar Messages

Are there problems using iphone 5 with Apple TV?

I am having problems getting my iphone to work with Apple TV; specifically, as a remote control device. My Apple TV works fine with my iPad and the Apple TV remote, but not with my iphone 5. When I use my iphone 5, the Apple TV experiences breaks and pauses in playback, etc. Is this a common problem and, if so, is Apple working on fixes for it? Thanks!

No one in these user to user support forums would have any way of knowing what Apple is working on unless they announce it.
I've not seen any other reports in these forums of issues specific to iPhones as you describe, which leads me to believe the issue is with your iPhone or ATV.
Try basic troubleshooting for the iPhone which is reset, restart, restore.
Also a restart of the ATV may clear things up.

Pairing iphone 4 with 2009 honda odyssey

Went through the proper techniques for the car trying to pair the phone and it can't find the phone. It worked with my old Razor. So what's different with the iphone. Does anyone know if there different way than the car's way to pair the iphone for a honda odyssey.
Thanks in advance.

just a longshot here but im guessing that there is nothing wrong with the headset and everything wrong with the bluetooth stack on the iPhone 4 there has been nothing but complaints about all kinds of different bluetooth devices not working properly in cars on headsets on everything its just kind of hit or miss on whats going to work and whats not going to work at this point im sure if you took that headset and tried to pair it with a 3gs it would work perfectly fine and not have any problems. Thats my opinion
as if you want to test out the headset you can try it on another phone if you have one or try it out on a friends phone if they would be nice enough to let you do it but I highly doubt there is anything wrong with the headset

TS2756 iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???

iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
as i said i have two iphone 4S,,,,,
1st one --- has os 5.1
2nd one has os 6.0
i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
plz reply asap...!!!
thnxxx in advance!!!

If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then:
Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

How do I activate a used iPhone 3 with no SIM card for use as an ipod touch?

How do I activate a used iPhone 3G with no SIM card for use like an iPod Touch? It was apparently on AT&T previously and I have another iPhone 3 that is active on AT&T if that is helpful. Thanks!

Copied from the link provided.
Follow these steps to use your iPhone without a wireless service plan:
Insert the SIM card from your new, activated iPhone or one that was previously used to activate the original iPhone.
Connect the iPhone to iTunes on a computer connected to the Internet.
Once iTunes activates the device, you're free to use the iPhone as if it were an iPod touch.

Hi everyone,,i bought a used iphone 5 with iOs 7.0.3. i want to delete the icloud account and add mine. I have sent an e-mail to the current account being used in my iphone. How can i get rid of this account plzzz help me out

Hi everyone,,i bought a used iphone 5 with iOs 7.0.3. i want to delete the icloud account and add mine. I have sent an e-mail to the current account being used in my iphone. How can i get rid of this account plzzz help me ou

no i called the store owner from whom i bought it. he was like i will check in records and if there is something i will let u know...he was like send an e-mail its better so if it was stolen so the shopkeeper wouldnt let me to e-mail to the owner

Hello, i'm using Iphone 5, with ios 7 . I have one old macbook, working with mac osx 10.6.8 and itunes last version updated. Itunes do not synchronize new contacts from my Iphone to my adress book mac. What can i do ?

Hello, i'm using Iphone 5, with ios 7 . I have one old macbook, working with mac osx 10.6.8 and itunes last version updated. Itunes do not synchronize new contacts from my Iphone to my adress book mac. What can i do ?

Hello, i'm using Iphone 5, with ios 7 . I have one old macbook, working with mac osx 10.6.8 and itunes last version updated. Itunes do not synchronize new contacts from my Iphone to my adress book mac. What can i do ?

Can i use iphone 5 with my other att lines do i need a new sim?

can i use iphone 5 with different phone number than the one i used when i ordered the phone if i have a family plan with muliple lines

Yes u can. I upgrades my wife's phone and I use the new iphone 5 with my number. Take it your carrier and get a different SIM card. Bring your ID and u must be the primary account user.

I am using iphone 4S with sprint carrier with IOS 7 and has error 1394

I am using iphone 4S with sprint carrier. It has IOS 7 and now I want to downgrade to IOS 6 and I have downloaded a firmware it is compatible with 4S. Now it shows error 1394 and I have tried to fix my host file in windows according to other forums in internet. But I haven't seen this line in my host file to change it
"74.208.10.249 gs.apple.com" to "#74.208.10.249 gs.apple.com".
PLease suggest me some solution for this problem

There is no approved method to downgrade. Your attempt to load a non-standard iOS file is causing the error. If you want to use your phone, you are going to have to try and restore it to the latest iOS compatable for that device which is iOS 7.0.4, otherwise it will not work and you will continue to see the error. Apple is no longer signing anything below the current iOS, so it will never activate.

I am using IPhone 5 with osi8.1.

I am using IPhone 5 with osi8.1.
My contacts are not showing phone numbers
(home and IPhone). However, to the right of
Where the phone number should be – is a
facetime icon and to the right of that is a phone icon.
If I touch either icon the phone successfully connects a call to
the person I am calling. From this, it seems to me that
The iphone # is in the contacts and is just not being displayed.
Does anyone know what I am doing wrong. Prior to ios
8.1 the Numbers were displayed in the contacts.
Thanks

Can you post a screen shot of what you are seeing?
I just looked in my contacts - when I open up a contact - the phone number(s) is(are) displayed on the left under the name and title information
What you are describing is what I see when I tap on "Details" in my message app - it shows just the name with the phone and FaceTime icon along with an "i"

I am using iphone 5 with vodafone network in NOIDA , but alwaz my phone is not rechable,

i am using iphone 5 with vodafone network in NOIDA , but alwaz my phone is not rechable,

Then as you've tried resetting the phone, the next step is to restore it from the latest backup. If that doesn't work, restore it as new, and if that doesn't work take it to Apple.

Is there an adapter that lets you use iPhone earbuds with an iMac?

I have big heavy uncomfortable headphones with a mic that I use for gaming on my iMac.
I'd rather use the earbuds from my iPhone.
Is there an adapter that lets you use iPhone earbuds with an iMac?

I got the splitter, (see link below), but the mic does not seem to work. Apparently, there's a difference between a mic port and a line-in port. Mic ports are powered by the computer, line-in ports are not. They expect a powered signal to come from the input device. The iMac has a line-in port.
I downloaded an app called Line-in that is supposed to give back the ability to use unpowered mics with Macs that lost the abiliy after a system update. It did not work for me. I guess my iMac never had the ability to use unpowered mics.
So I ordered the USB Stereo Audio Adapter below. It's basically a sound card that plugs into a USB port and will work with an unpowered mic. It has not arrived yet. I'll let you know how it goes.
GTMax Headset Adapter: Smartphone Headset to PC Adapter - Use a 3.5mm iPhone/Smartphone Headset With Your PC, Converts 3.5mm Plug to Dual Mic/Audio 3.5mm, for Skype/VOIP
http://www.amazon.com/gp/product/B0046FMRGA/ref=oh_details_o01_s00_i00
Syba SD-CM-UAUD USB Stereo Audio Adapter, C-Media Chipset, RoHS
http://www.amazon.com/gp/product/B001MSS6CS/ref=oh_details_o00_s00_i00

Hi sir,,, I am using iPhone 3GS, Hi sir,,, I am using iPhone 3gs with 4.3.3

Hi sir,,, I am using iPhone 3gs with 4.3.3 & I want to update my phone with 6, with out computer, is it possible or not, & one more thing, I don't whether my phone is jail broken or what.,,

It isn't possible.
(86520)

Using iPhone 4s with IOS5 and my Music icon has disappeared. How do I get it back? Please.

Using iPhone 4s with IOS5 and my Music icon has disappeared. Please help me to get it back.

It should be in your applications folder. Locate it; click and hold onto it then drag it back to where it was.

Problem using SQL Loader with ODI

Hi,
I am having problems using SQL Loader with ODI. I am trying to fill an oracle table with data from a txt file. At first I had used "File to SQL" LKM, but due to the size of the source txt file (700MB), I decided to use "File to Oracle (SQLLDR)" LKM.
The error that appears in myFile.txt.log is: "SQL*Loader-101: Invalid argument for username/password"
I think that the problem could be in the definition of the data server (Physical architecutre in topology), because I have left blank Host, user and password.
Is this the problem? What host and user should I use? With "File to SQL" works fine living this blank, but takes to much time.
Thanks in advance

I tried to use your code, but I couldn´t make it work (I don´t know Jython). I think the problem could be with the use of quotes
Here is what I wrote:
import os
retVal = os.system(r'sqlldr control=E:\Public\TXTODI\PROFITA2/Profita2Final.txt.ctl log=E:\Public\TXTODI\PROFITA2/Profita2Final.txt.log userid=MYUSER/myPassword @ mySID')
if retVal == 1 or retVal > 2:
raise 'SQLLDR failed. Please check the for details '
And the error message is:
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 5, in ?
SQLLDR failed. Please check the for details
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.h.y(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)

Problem using Iphone 3G with 2009 Honda Fit

Similar Messages

Maybe you are looking for