Problem using iPod with Xbox 360

I have always used my iPod to listen to music while I play games on my Xbox 360, until recently. My 360 no longer recognizes my iPod by name and it is just listed as something generic like external usb device and when I click on it there is no music on it. My iPod is otherwise fully functional when it is not connected to my 360 and my roomate's iPod still works fine with my 360 so i must have changed a setting or something, but I refuse to restore my iPod to factory settings and lose all my music. Does anyone have any suggestions? I'm wondering if I should just go to settings, reset all settings. I'm reluctant to try this because I don't know if it will delete my music like if you restore your iPod. Any thoughts on any of this would be much appreciated.

Get this, I was fooling around and found a way to play songs from my iPod on my 360, sort of. When I click on portable device from my 360 or my iPod from my computer desktop three folders appear. Calendars, Contacts and Notes. If I drag songs from my iTunes library to any of these three folders within my iPod icon on my desktop, I can open that folder on my 360 and play the songs in it! The problem is that the sound quality is terrible and it doesn't use my iPod equalizer because things in these folders are not considered music so they are not treated like music when I click on them. In iTunes when I click on my iPod and it has a status bar showing my free space, music space, and other space on my iPod the songs that I put in the Notes folder show up in orange as taking up other space instead of music. Anyway this doesn't really solve my probem so I'm still open to suggestions and/or a number I can call for help.
Power Mac G4 Mac OS X (10.4.8)

Similar Messages

Problem using ipod with itunes 5.0.1

Could anyone help me?? I'm having serious problems using my ipod mini with my "just downloaded" itunes 5.0.1.
it says that my comunication software with ipod is not correctly installed and that i have to reinstall itunes again. i did it the problem is always there. what can i do?? can someone help me??

Man, it seems that iTunes 5.whatever has gotten us all a little hot under the collar. I'm back up and running...this is what I did...I hope it helps some of you out.
1) created a new folder in MyMusic and copied everything from my iTunes library to the new folder. I then tested a few songs to make sure they still played (you never know)
2) I deleted iTunes using the control panel selection Add/Delete programs. I emptied the recycle gin and then did a search to see that iTunes was no longer there.
3) I went to filehippo.com to download iTunes 4.8 (my original disks are packed (Thank you to poster Allison for the filehippo.com suggestion).
4) I copied all my songs back into iTunes from where I had stored them in the new folder I created in MyMusic)
5) I connected the iPod Mini and opened iTunes and darn if it STILL didn't recognize the iPod
6) I did a restore on the iPod
7) I reconnected the iPod and had to reregister it and Voila! it worked again!!!!
Whatever the new features were in ver. 5.01, they were NOT worth the hassle I've experienced over the past two weeks. I'll stick with version 4.8 for awhile.

Using ipod on xbox 360

I just today bought an xbox 360 and i tried connecting my ipod video to it but for some reason after i select the song to be played absoloutly nothing happens. Please help me resolve this issue. I appriciate the help thank you.

Here is more info for those that are wondering how to do that...
http://www.xbox.com/en-US/support/systemuse/xbox360/digitalmedia/ipod.htm
btabz

Using macbook with xbox 360.

I was wondering if I could hook up my xbox 360 to play through my future macbook. How well would that run? Or should I just not even try to attempt that?

Are you asking if you could hook up your xbox to the mac to play games on the mac?
If that is what your asking, I don't think it work work, I am sure you would be able to find a way, but it would be very slow. So I would suggest that you don't even try. I am not even sure if you could do that.
Adam Chartrand
PS - Good luck.

Toast9 for use with Xbox 360??

Can I use Toast 9 to make a HD DVD for use on my xbox 360?? How does it work? Do I export the movie when I am done editing it with iMovie '08 to Toast? When I export now it the most it will allow is 960x540...will this change once I have Toast9?
Thanks

AppleMan1958 wrote:
Toast 9 has a BluRay plugin. It does not, to my knowledge, have an HD DVD plugin...
afaik, 'dead horse' HDDVD is supported out-of-the-box..
indeed, for BR media, you need the BR-plug-in..
read the specs on roxios site..

I have imac 21.5 can i use it on xbox 360 as screen?

i have imac 21.5 can i use it on xbox 360 as screen?

It depends on what kind of inputs your TV has. If it has HDMI, miniDisplayPort, DisplayPort, DVI or VGA then then answer is yes and all you need is the proper adapter & cable.
Your 2009 iMac probably has a miniDisplayport output. If your TV has an HDMI input then you need the Apple miniDisplayport-DVI Adapter plus a DVI-to-HDMI cable like this one. Note you may also need an audio cable; normally this is a 3.5mm male stereo on one end and 2x RCA male on the other, but it depends on the kind of audio connection(s) your TV has.
Here is more information about the Apple miniDisplayport adapters that are available. I have NEVER had a problem with ANY of the Apple adapters. There are also third-party adapters that may be higher or lower priced but I have not had good experience with them.
(Disclaimer: I do not receive any compensation of any kind for the products I suggest or recommend.)

Connecting with Xbox 360

is there a reason iPhones won't connect with Xbox 360's like iPods did?

Because even though it plays mp3 and has ipod capabilites...it's a phone! Were you able to connect your previous cell phone to your Xbox?
Message was edited by: iphonechik

Linksys WRT54G compatible with XBOX 360's Wireless Network Adapter?

Is the Linksys Wireless G Broadband Router (WRT54G) compatible with XBOX 360's Wireless Network Adapter?

Use the LAN port and cable. That way you'll get no interference and great data transfer. Or this maybe helps. http://www.xbox.com/en-US/support/connecttolive/xbox360/homenetworking/equipment.htm
Message Edited by iknownothink on 06-21-2007 03:44 AM

Problem Using Multiple With Statements

I'm having a problem using multiple WITH statements. Oracle seems to be expecting a SELECT statement after the first one. I need two in order to reference stuff from the second one in another query.
Here's my code:
<code>
WITH calculate_terms AS (SELECT robinst_current_term_code,
CASE
WHEN robinst_current_term_code LIKE '%60' THEN robinst_current_term_code - '40'
WHEN robinst_current_term_code LIKE '%20' THEN robinst_current_term_code - '100'
END first_term,
CASE
WHEN robinst_current_term_code LIKE '%60' THEN robinst_current_term_code - '100'
WHEN robinst_current_term_code LIKE '%20' THEN robinst_current_term_code - '160'
END second_term
FROM robinst
WHERE robinst_aidy_code = :aidy)
/*Use terms from calculate_terms to generate attendance periods*/
WITH gen_attn_terms AS
SELECT
CASE
WHEN first_term LIKE '%60' THEN 'Fall '||substr(first_term,0,4)
WHEN first_term LIKE '%20' THEN 'Spring '||substr(first_term,0,4)
END first_attn_period,
CASE
WHEN second_term LIKE '%60' THEN 'Fall '||substr(second_term,0,4)
WHEN second_term LIKE '%20' THEN 'Spring '||substr(second_term,0,4)
END second_attn_period
FROM calculate_terms
SELECT *
FROM gen_attn_terms
<code>
I get ORA-00928: missing SELECT keyword error. What could be the problem?

You can just separate them with a comma:
WITH calculate_terms AS (SELECT robinst_current_term_code,
CASE
WHEN robinst_current_term_code LIKE '%60' THEN robinst_current_term_code - '40'
WHEN robinst_current_term_code LIKE '%20' THEN robinst_current_term_code - '100'
END first_term,
CASE
WHEN robinst_current_term_code LIKE '%60' THEN robinst_current_term_code - '100'
WHEN robinst_current_term_code LIKE '%20' THEN robinst_current_term_code - '160'
END second_term
FROM robinst
WHERE robinst_aidy_code = :aidy),
/*Use terms from calculate_terms to generate attendance periods*/
gen_attn_terms AS
SELECT
CASE
WHEN first_term LIKE '%60' THEN 'Fall '||substr(first_term,0,4)
WHEN first_term LIKE '%20' THEN 'Spring '||substr(first_term,0,4)
END first_attn_period,
CASE
WHEN second_term LIKE '%60' THEN 'Fall '||substr(second_term,0,4)
WHEN second_term LIKE '%20' THEN 'Spring '||substr(second_term,0,4)
END second_attn_period
FROM calculate_terms
)Not tested because there are no scripts.

Problem using Toplink with JUnit

Hi,
I have a problem using Toplink with JUnit. Method under test is very simple: it use a static EntityManager object to open a transaction and persists data to db. When I invoke the method from a test method, it gives me the exception:
java.lang.AssertionError
     at oracle.toplink.essentials.ejb.cmp3.persistence.PersistenceUnitProcessor.computePURootURL(PersistenceUnitProcessor.java:248)
     at oracle.toplink.essentials.ejb.cmp3.persistence.PersistenceUnitProcessor.findPersistenceArchives(PersistenceUnitProcessor.java:232)
     at oracle.toplink.essentials.ejb.cmp3.persistence.PersistenceUnitProcessor.findPersistenceArchives(PersistenceUnitProcessor.java:216)
     at oracle.toplink.essentials.internal.ejb.cmp3.JavaSECMPInitializer.initialize(JavaSECMPInitializer.java:239)
     at oracle.toplink.essentials.internal.ejb.cmp3.JavaSECMPInitializer.initializeFromMain(JavaSECMPInitializer.java:278)
     at oracle.toplink.essentials.internal.ejb.cmp3.JavaSECMPInitializer.getJavaSECMPInitializer(JavaSECMPInitializer.java:81)
     at oracle.toplink.essentials.ejb.cmp3.EntityManagerFactoryProvider.createEntityManagerFactory(EntityManagerFactoryProvider.java:119)
     at javax.persistence.Persistence.createEntityManagerFactory(Persistence.java:83)
     at javax.persistence.Persistence.createEntityManagerFactory(Persistence.java:60)
     at it.valerio.electromanager.model.EntityFacade.<clinit>(EntityFacade.java:12)
     at it.valerio.electromanager.business.ClienteBiz.insertIntoDatabase(ClienteBiz.java:36)
     at it.valerio.electromanager.test.model.ClienteTest.insertDBTest(ClienteTest.java:30)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.junit.internal.runners.TestMethodRunner.executeMethodBody(TestMethodRunner.java:99)
     at org.junit.internal.runners.TestMethodRunner.runUnprotected(TestMethodRunner.java:81)
     at org.junit.internal.runners.BeforeAndAfterRunner.runProtected(BeforeAndAfterRunner.java:34)
     at org.junit.internal.runners.TestMethodRunner.runMethod(TestMethodRunner.java:75)
     at org.junit.internal.runners.TestMethodRunner.run(TestMethodRunner.java:45)
     at org.junit.internal.runners.TestClassMethodsRunner.invokeTestMethod(TestClassMethodsRunner.java:66)
     at org.junit.internal.runners.TestClassMethodsRunner.run(TestClassMethodsRunner.java:35)
     at org.junit.internal.runners.TestClassRunner$1.runUnprotected(TestClassRunner.java:42)
     at org.junit.internal.runners.BeforeAndAfterRunner.runProtected(BeforeAndAfterRunner.java:34)
     at org.junit.internal.runners.TestClassRunner.run(TestClassRunner.java:52)
     at org.eclipse.jdt.internal.junit4.runner.JUnit4TestReference.run(JUnit4TestReference.java:38)
     at org.eclipse.jdt.internal.junit.runner.TestExecution.run(TestExecution.java:38)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:460)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:673)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:386)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:196)
Where is the problem???
Regards,
Valerio

EntityFacade class is very simple and it uses a static EntityManager object. Here the code:
public class EntityFacade {
     private static EntityManager em = Persistence.createEntityManagerFactory("ElectroManager").createEntityManager();
     private static Logger logger=Logger.getLogger(EntityFacade.class);
     public static void insertCliente(Cliente c)
          logger.debug("Inserisco cliente nel db: " + c);
          em.getTransaction().begin();
          c.setId(getNextIdForTable("Cliente"));
          em.persist(c);
          em.getTransaction().commit();
If I call the method from inside a main it works well, so I think the problem is not the classpath neither the URL in the persistence.xml. However the URL is:
<property name="toplink.jdbc.url" value="jdbc:derby:c:/programmi/ElectroManager/db/electroManager"/>
I use the latest build version of TopLink.
Thanks.

Any Problems using SSL with Safari and the move with Internet explorer to require only TLS encryption.

Any Problems using SSL with Safari and the move with Internet explorer to require only TLS encryption.

Hi .
Apple no longer supports Safari for Windows if that's what you are asking > Apple apparently kills Windows PC support in Safari 6.0
Microsoft has not written IE for Safari for many years.

No ip with wrt54gl with Xbox 360

I'm stumpped. Brand new, version 1.1 wrt54gl.. replaced my old dlink one which worked fine for my 360 wrt54gl will not give my 360 a ip address. everything else on the router works fine. this is all wired. tried statically assigning one.. no go dmz.. -- no go. checked wires.. tried different ones... everything else gets an ip. tried turning firewall off.. UPNP off and on.. plug back my dlink.. works fine.. can connect to xbox live and play. i hate to return this, but any ideas? is this just not compatible with xbox 360? please help!. -Bmac6996

Try this link to configure the X-BOX .....

Problem using ViewObject with bc4j:table

Hello !!
This is the query of my ViewObject:
select * from speiseplan order by jahr desc, kw desc;
and everything works fine in the BC4J tester:
jahr kw
2003 52
2003 7
2003 3
2002 51
But in my uix page the rows are not correctly sorted:
jahr kw
2003 3
2003 7
2003 52
2002 51
What's going wrong here?
Thanks for your help.
Regards,
Mareike

Duplicate post.
Original problem using ViewObject with <bc4j:table>

Is the Plantronics - GameCom 377 Headset compatabile with Xbox 360?

is this head set compatabile with xbox 360, the specs on best buy.com do not say!
Plantronics - GameCom 377 Over-the-Head Stereo Headset
Model: GameCom 377| SKU: 8978403
Customer Reviews: 4.0 Read reviews (83)
<script type="text/javascript"></script> <script type="text/javascript" src="http://images.bestbuy.com:80/BestBuy_US/store/js/jQuery/plugins/jquery.cj-object-scaler.min.js"></script> <script type="text/javascript" src="http://images.bestbuy.com:80/BestBuy_US/store/js/jQuery/plugins/ku4j-min.js"></script>
<script type="text/javascript"></script>
Shipping: Usually leaves our warehouse in 1 business day
Estimate Arrival Time ›
Store Pickup: Check Stores ›

Hey kole71,
That particular model of Plantronics is compatible for PC gaming but not Xbox 360. Plantronics does have some headsets that work with 360, and I've attached a PDF of the chart found on their website. Hope that helps!
Mariel|Community Connector | Best Buy® Corporate
Private Message
Attachments:
gaming_portfolio_data_sheet_us.pdf ‏1235 KB

Problems using iCloud with Mountain Lion on iMac8,1

problems using iCloud with Mountain Lion on iMac8,1 - about 5J old - iMac gets slower and slower - total free memory is used in some minutes - no more reaction on input

Download > http://codykrieger.com/gfxCardStatus Open it and select Integrated Only. It's a bug with NVIDIA graphic cards

Problem using iPod with Xbox 360

Similar Messages

Maybe you are looking for