Problem using lilo in archCD0.7 after upgrade to 2.6.12.2-1

What procedure is available to permit lilo to be activated with Udev kernel using arch 0.7CD for repair?
Note that arch 0.7CD uses devfs nomenclature and that chroot doesn't permit Udev statements.
What can be done?

Thank you Noriko,
I tried fallback and break=y.
I did mkinitcpio -p kernel26. Could you explain your suggestion: what does option -c [config file] mean?
I tried also earlymodules=piix. I had very similar problem two months ago. I tried to reinstall my system yesterday but no results. Two months ago I had to delete sata in HOOKS in mkinitcpio.conf. Then it started to work, but now I had no idea what to do. I am working now on KateOS distro.
Have you any more ideas?
Thank you once again

Similar Messages

Problem using Yahoo Video Playlists after upgrading Firefox

I have Created Yahoo playlists in the past and after upgrading my Firefox they no longer work. meaning when i click on a playlist everything loads properly except the video itself and I can't play any of the other videos in the playlist either. Also i can't add new songs to those playlists or rate those videos either.

This is not a Firefox issue, you could try downgrading to version 18 or 17 but Yahoo needs to update their toolbar and they haven't been doing anything to solve issues regarding them except by laying the blame on us.

I'm using an iPhone 4 after upgrading to iOS 5 i'm getting an error 1635 now i'm facing problems syncing my contacts and facing many problems, i have restored my iPhone but still i'm getting the same error

i'm using an iPhone 4 after upgrading to iOS 5 i'm getting an error 1635 now i'm facing problems syncing my contacts and facing many problems, i have restored my iPhone but still i'm getting the same error

Did you check your security software settings? eliminating conflicts from third-party security software.

Is anyone having problems with the battery drains quickly and the iphone4 heats up in use and in charging after upgrading to 5.1.1?

Is anyone having problems with the battery drains quickly and the iphone4 heats up in use and in charging after upgrading to 5.1.1?

I have had the same problem but I seem to be getting somewhere to fixing it!!! My battery was going down at 20% an an hour now its 10% with constant use and 5 in standby !!! So improvement all round
First I did a restore then I drained the battery i started to charge it and when it came on I turned the phone off completely and let it charge to 100% I then left it for a couple of hours on charge at 100. I saw no improvement after 1st drain so I repeated the drain battery and charge steps again with the phone turned off when charging and have seen a very big improvement. I am going to do it again tonight and hopefully problem solved!!!!
The next issue is iMessage as that's playing up and wifi drop out
Good luck

Problems with set up disc after upgrading hard drive

I am having problems starting up my Macbook after upgrading the hard drive from 80GB to 160GB. The new hd is SATA, a WDScorpio. The pins on the end look the same, and I've had no problem with the physical install. When I go to start up the Macbook, I get a gray screen and the "flashing manila file w/a question mark" icon. I load the disc while holding down the "C" key, and all that happens is the disc gets ejected. What am I doing wrong? I also have my hd backed up w/time machine in an external hd. Any ideas?

Turns out, my problem is a malfunctioning optical drive. My Macbook couldn't read the set up disc. This is the second time in a week that I have had this Macbook into the apple store for warranty repair work. Last week, It was a defective VGcable. Each trip to the Applestore is 115 miles round trip from where I live. I tried to get Apple to give me a new computer, but no dice. I even had a district manager in Boise Idaho hang up on me. It's too bad when they know they have a product which everyone loves, and wants to use. They can set the terms. How many things must go wrong before they just replace the @#$# thing? I bought the Macbook Feb 12th, so it's not that old. I have handled it with the utmost care. Anyway, I've tasted the forbidden fruit, and will continue to use Apple products. Thanks for your help. I'll probably have a much easier time with a computer that works. (knock on wood)

I can not use ipad smart cover after upgrade ios 7.

I can not use ipad smart cover after upgrade ios 7. It makes reboot again again...if i cover up ipad with smart cover. i never had this problem before. please fix this bug!!!!

Change your iPod DNS to 8.8.8.8
That should work. Cheers

Problems with your HP printer after upgrading to Windows 8.1

If you are experiencing problems with your HP printer after upgrading to Windows 8.1 please click on the below link and install the HP Print and Scan Doctor and run the utility to fix the issue.
www.hp.com/go/tools.
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

Hi.....my laserjet 1536dnf mfp was working perfectly with win 8 pro....then I installed win 8.1 pro and now the computer ,which is part of a network,can not communicate with the scanner of the printer--it prints just fine. On another computer (running win 7 ) on the same network, the scanner and all other printer functions work just fine.
I have tried installing the latest drivers from HP......scanner still not "communicating" with computer.....also temporarily disabled firewall.....please help...all the best -David G (gossat)

Hello I am using iPhone 5s but after upgrading to iOS 8.0.1 I am unable to signin my iCloud account ?

Hello
i am using iPhone 5s, but after upgrading to iOS 8.0.1 I am unable to sigin my iCloud account
whenever i try to signin it shows " verification failed" / " the password you entered in incorrect"
i changed by Apple ID PASSWORD three times and tried to signin but it shows same as above - verification failed / password is incorrect
please suggest
regards
karan deep singh

I believe that all iPhones, purchased in Egypt, from official sources, are sold as carrier locked. So, your phone was hacked by someone so you could use it in Germany. Sorry, but that's what happens to hacked iPhones.
No one here can help you, nor can/will Apple, and since none of the carriers in Egypt offer official unlocking, your choices are not good.

On my 2012 MBP I can no longer use dual screens/HDMI after upgrading to 10.8.2. I'm using Moshi Thunderbolt adapter

On my 2012 MBP I can no longer use dual screens/HDMI after upgrading to 10.8.2. I'm using Moshi Thunderbolt adapter

I think you are sailing in uncharted waters with those kind of modifications.
I am only guessing, but if you have not already done so, do a PRAM reset and then trash your FCP preferences.
Big Poppa Chris wrote:
I've also notice when I start the computer up, it stays on the grey screen longer than it did when I had the original card (512 mb).
My understanding is the Mac is doing a ram/hardware test during the grey screen, if the card you added had additional memory, then it is very likely the test will take longer - but I am no hardware expert.
MtD

Strange problem with my ipod 2g after upgrade to os 4.2

Strange problem with my ipod 2g after upgrade to os 4.2
the problem with volume some times when i switch on the ipod i hear the sound
alarm rings it's work too i can hear it .. but the problem i cant hear anything else as yourtube or music i cant hear buttons sound when i typing
i hope i get help

I would try in order:
- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backu via iTunes.
- Restore the iPod to factory defaults/new iPod.

Why can't I use word, excel etc after upgrading OS X lion ?

Why can´t I use word,excel etc after upgrading too OS X Lion ?

Office 2004 is a PowerPC app that requires Rosetta to run. Roseeta and thus all PPC aps are not supported on Lion. Further Office 2008's Installer is a PPC app. Office 2008 will run if installed before installing Lion, but you cannot install it from Original Office 2008 Media after installing Lion.
Steve

Cannon MP830 can't use the scanner function after upgrading to Mavericks.

I have an Cannon MP830 and now I can't use the scanner function after upgrading to Mavericks. Can someone help?

There is no ICA driver for this model so you won't be able to use Image Capture or Preview. But there is a TWAIN scanner driver and the supporting MP Navigator application available for 10.8 from Canon, so you could try installing these and see if you can scan again.

Anyone having problems accessing AT&T app after upgrading iSO to 7.3?

Anyone having problems accessing AT&T app after upgrading iSO to 7.0.3?

Well, it actually says "You account type is not supported via the mobile aplication. You can manage your account by accessing the full web site at www.att.com"

I'm using i phone 3gs after upgraded to ios 5 few hours from shop my phone totally shutdown and cannot on.how to solve it.tq

help..help...my i phone 3gs after upgrading to ios 5 for few hours thn my phone "pass away"total cannot on anymore.how to solve this problem.tq

Thanks for the clarification. Yes, I do access my email from 2 different sources.
FYI, I use the POP mailserver as I need most of the information to be loaded onto my PC while on a plane / not connected to the interenet.
The primary use of mail on my iPhone is to be available as much as possible - even when I'm away from my office.
Thanks again for your help. I'll start deleting them in segments of 100.......

Problems with my second monitor after upgrading to Mountain Lion

Basically I have a Mac Pro 8-core with two video boards (2 x NVIDIA GeForce GT 120 512 MB) connected to two monitors. After upgrading to the Lion Mountain, 90% of the time when I start my MAC the second monitor doesn't show it image, keeps in full black screen, what puzzle me is, I can see the mouse arrow on it, so its alive, but its in black, than I have to restart the computer over and over again until it finally make the second shows it contains.
Have anyone experienced the same problem?!

Hello Carlo!
Sorry but I don't understand which part of my question is not clear. I've been to the Apple Store, they asked me to bring my 20kg Mac Pro and both 24" inches Eizo monitors to central London to have it checked. Well, honestly, this is impossible, is an invitation for an accident.
Is just unbeliavable that no one has experienced my problem, looks like I am the only one person with two monitors using the Lion Mountain.

Problem using lilo in archCD0.7 after upgrade to 2.6.12.2-1

Similar Messages

Maybe you are looking for