Problem using magnifying tool

Since a few days back the usage of the magnifying tool has changed, don't know what I've done and can't fix it.
Previously the magnifying glass enlarged and reduced the image while I moved the mouse ponter, its was flowing with my movement. But now it just works as in previous versions, I have to click for zoom in/out. Not just click drag, now its "click, click, click, click, click, click".
Help appreciated.

Most likely you have turned off "Scrubby Zoom", just check the box in the Zoom tool settings. All tools remeber their settings, if you wish to reset a tool to it's default settings, right-click on the Zoom tool (in this case) to the left on the tool settings bar and select "Reset Tool" or "Reset All Tools"...

Similar Messages

  • Problem using nss Tool

    Dear All
    I am using a nss Security Tool to view my cert stored in mozilla firefox cert store on windows XP. when i tried to run certutil command it gives me error "This application has failed to start because libplc4.dll was not found. Re-install the application may fix this problem". i downloaded nspr-4.1.1.zip. after unziping i tried to register the libplc4.dll with regsvr32.exe command. it gave me error "DllRegisterServer entry point was not found". i know this problem occurs if dll is corrupt. i again downloaded and tried but the same result. i also tried it by copied all the dll's in the nspr-4.1.1.zip in bin dir of nss tool, because .net dll can work without manually registering it. the same error comes again. i searched my program files for any other libplc4.dll. i found one in my eToken dirver directory.Though seems illogical but i also tried to uninstall the driver and install it again. same error occured.
    can anyone help me.

    Hi,
    When u r saving the workspace give the file extension and try.If u save without giving extension it give this error.
    Amudha

  • Problems using mesh tool

    Here is  the vector image I created...(yes i know this is a jpeg i made of it)
    The problem is i can use the gradient tool on any section of this...
    But the mesh gradient thing will not work...
    I select and enclosed section and try to use it with no luck...
    Can some help me please
    thanks

    Could it be because i used live paint...
    The one i didn't paint seems too work...
    So heres my question is there a way to reverse the effects of live paint... (un-merge etc) what ever i did to make it so i could live paint it
    Thanks

  • Problems using Type Tool

    Hi
    I'm a bit of newbie to Indesign and was just wondering if someone could help me out. I'm having problems with the Type Tool.
    I've been working on my first few documents, (simple 1 page postcards), but when I go back to add some more text using the Type Tool it doesn't create the usual type frame/box and the cursor just goes straight to the top left hand side of the document? I'm sure I must be doing something wrong.
    Apologies if the answer is dead simple.
    Cheers
    spur07

    You probably have a rectangle as a background on your page? When you click anywhere on that rectangle with text tool, it converts your rectangle to text frame and insertion point jumps to top-left corner of frame.
    It´s a bit annoying but you can get rid of that feature from preferences, in Type tab, there is a checked feature Text tool converts frames to text frames (or something like that) Just uncheck it... Then you have to change those accidentally converted rectangles back to grapgic frames (Select rectangle and choose Object>Content>Graphic)
    If you don´t want to stop using that feature, you can also draw your text frame outside of page, type you text and move it right position

  • Problem using Brush tool with layer mask in Photoshop CC.

    Using Photoshop CC, working on a layer mask.  Using the Brush tool to paint white to show the effect works like normal.  Painting black has no effect.  Just started doing this in the last two days.

    Check you Brush blending mode setting in the tools option bar.

  • Sun app server problem using asadmin tool

    I have installed sun app server and trying to do the simplemessage tutorial. When I run the
    ant create-cfcommand I get the following
    [exec] Invalid user or password
    [exec] CLI137 Command create-jms-resource failed.I have put an echo line in app-server-ant.xml to see what the command is and it is.
    [echo] c:/Sun2/SDK/bin/asadmin.bat create-jms-resource --user admin  --passwordfile C:/Sun2/SDK/javaee-5-doc-tutorial-1.0_03/javaeetutorial5/examples/common/admin-password.txt --host localhost --port 4850 --restype javax.jms.ConnectionFactory --enabled=true jms/ConnectionFactoryI have checked the password file and it is
    AS_ADMIN_PASSWORD=adminadminAny ideas?
    I have checked around about using parameter password but when running this I get an error saying this is not valid and that I should use passwordfile
    Kelvin

    You haven;t specified the exceptions you r getting ........while starting your default server.
    if u r getting exception about InetClass then connect your system with LAN/Internet then your problem will be solved becoz i m using same location address as you specified, space doesn't matter at all - i think so, it is running fine........

  • Problem using adjustment tools??

    Hi All,
    Playing around with the adjustment tools in new Photos. All seem to work, with the exception of Colors and Light. Whether using the auto slider or the fine tuned settings (exposure, highlights, shadows, etc) I can't seem to get any changes in the image.
    Any idea what I'm doing wrong??

    I was having issues using Adjustments too. Everything else was fine except non-functioning Adjustments, but I re-launched Photos and the adjust controls seemed to work. I am pretty new to this app myself and have lots of exploring to do. Previously used iPhoto full time.

  • Problem using PJA tools Gif/Image Encoder

    hi
    can someone tell me where i am going wrong ...I am getting the following error after i ran a servlet .
    Internal error: Unexpected error condition thrown (java.lang.NoClassDefFoundError: Acme/JPM/Encoders/ImageEncoder,Acme/JPM/Encoders/ImageEncoder), stack: java.lang.NoClassDefFoundError: Acme/JPM/Encoders/ImageEncoder
    at java.lang.ClassLoader.resolveClass0(Native Method)
    at java.lang.ClassLoader.resolveClass(ClassLoader.java:597)
    at com.iplanet.server.http.servlet.NSServletLoader.loadClass(NSServletLoader.java:114)
    at com.iplanet.server.http.servlet.NSServletEntity.load(NSServletEntity.java:337)
    at com.iplanet.server.http.servlet.NSServletEntity.update(NSServletEntity.java:173)
    at com.iplanet.server.http.servlet.NSServletRunner.Service(NSServletRunner.java:427)
    I added both the GifEncoder and ImageEncoder class files to the classpath . Still the same problem ...
    I need some help ..pls..
    prabhu

    Try copying the GifEncoder and ImageEncoder files or the jar file to the app server lib directory.

  • Unable to use some tools...

    hello I am currently using a galaxy s3.I'm having problems using the tools in the user interface.when I try to collect some of the tools it go off screen. because of this some of the tools are not visible and I am NOT able to select some of them. otherwise I really like this out what is there a way to fix it?

    Hi,
    I would try to exit the document/project with the back button so that you don't lose any work.
    Then you can retry to enter and see if it works. If that doesn't work please try to restart the application.
    thanks,
    Ignacio

  • Problem using PSE9 Brush Tool!

    I am experiencing a problem using the PSE9 Brush Tool. The color does produced by the brush not match the color of the sample picked by the Eyedropper Tool, Painting near the area where the sample was picked-up results in a much darker color.

    Check the blend modes for the brush tool in the tool options bar.
    Also if your painting on a blank layer check the blend modes in the layers panel.
    Either way try the Normal mode.
    MTSTUNER

  • Problem with InDesign CC redrawing the screen too slow while using Zoom tool

    Hello. I got a problem with InDesign CC redrawing the screen too slow while using Zoom tool. Sometimes it takes more than a secong to zoom in or out. However InDesign CS6, Photoshop CC, Illustrator CC works just fine. What could be the problem, videocard or something else? Below is my PC configuration: OS Windows 8 Pro (x64); processor Intel Core i7 2600k CPU 3,40GHz; video adapter NVIDIA GeForse GTS 450; monitor NEC PA271W (2560x1440).

    Yes it’s a bug. The trick is to select the tool and then left click the photo information strip and hold for a few seconds until you see the windows bar at the top of the screen (not responding)
    The lasso tool should then work normally.

  • Z68a-GD65 (G3) Problems Using USB Bootable Tool 1.25g

    I am having problems using the USB Bootable Tool 1.25g with the P77, P80, and P82 BIOS's. I have tried both modes 1 and 2. Both modes copy over everything successfully. When booting using the bootable USB drive, after copying the BIOS file via mode 1, the tool flashes a screen very quickly, then says BIOS updated successfully. This is not true, however, because nothing has been updated. I see something rapidly go 1-2-3-4-5, but the progress indicator I was familiar with with the old version of the USB Bootable tool does not show up, where the BIOS file was being copied block by block and took some time.
    Mode 2 doesn't work either. I get the message "ROMFILE ROMID is not compatible with existing BIOS". This happened with all three BIOS's, using mode 2. I have tried the "Fix my USB Key" option, and have tried clearing the CMOS as described in the instructions on the forum. As a test, I used the M-Flash in the BIOS and was able to flash to P80. P80 is giving me problems with an Intel Management Mode HECI error which disappears when I start the PC, as well as me being unable to raise the base clock speed--even though it shows as raised in the BIOS and it saves the setting. I am now stuck with P80. Now I cannot flash to any other BIOS using the M-Flash utility, as it doesn't find the BIOS file I manually copied over to the drive. The USB bootable tool will not work.

    I did use mode 1, although since I was having trouble, I used mode 2 also, after reading troubleshooting instructions for the USB BIOS tool. The archives I used were all ones I downloaded from the Beta BIOS thread I posted above.
    The problems I was having with P80 were actually because I unknowingly was using the N20 BIOS because somehow my BIOS reverted to that. I have no idea how that happened, aside from that possibly being the failsafe BIOS as part of the dual bios system. Above, I meant to say that I flashed the BIOS through Windows when I had success with the P80 BIOS. The M-Flash utility does not read the BIOS files which are available on this forum.

  • Problem in using WSDL2Java tool in axis

    Hi all,
    When we make our Webservices in Apache Axis at Server,the first step is to generate the WSDL file by using Java2WSDL tool and passing the interface and ip address of server as argument.For example,
    org.apache.axis.wsdl.Java2WSDL -o AddService.wsdl -l"http://127.0.0.1:8080/axis/services/AddService" -n AddService
    Then we use WSDL2Java to generate java files and write our code there.
    My problem is that I do not know what will be the IP address of the machine where this service will be deployed.So is there any way so that we can make all the java files in our application but provide the ip address during deployment.

    I was able to compile and build the codes in j2eetutorials14 recently. Now after few days I need to compile the code again .
    But when I am running 'asant build' command as given i tutorials I am getting ''asant' is not recognized as an internal or external command,
    operable program or batch file." error.
    I am not able to find out why suddenly asant is not available???
    Any pointers will be highly appreciated.
    Thanks

  • I just installed MacOS X Yosemite on my MacBook Air 2011.  After installing Yosemite I installed the Photoshop Elements 12.1 upgrade, but now when I open the program and try to use the tools, the program freezes.  How do I fix this problem?

    I just installed MacOS X Yosemite on my MacBook Air 2011.  After installing Yosemite I installed the Photoshop Elements 12.1 upgrade, but now when I open the program and try to use the tools, the program freezes.  How do I fix this problem?

    If you use a trackpad and don't want to switch to a mouse, you can uninstall and reinstall all day long and will still have problems, but if you really want to try it, you can download PSE 12 here:
    Download Photoshop Elements products | 12, 11, 10

  • Lasso tool problem, using alt key, no click within 5sec causes loss of active window focus

    I have been using Photoshop since ver. 4 and have never seen this happen.  The only difference is now I'm on Windows 7 64bit.  Did not have this problem with XP.  Current version CS3 Extended.
    Problem: While using Lasso tool with the alt key if I do not make a mouse click in 5 seconds Photoshop's active window loses focus for a split second and then the first point of my selection and the last point will connect.  Thus, wasting my time and my attempt at a selection.
    I have task bar buttons to "Never combine".  I see for that split second what appears to be another program button opening but it is so fast that I cannot see if there is a name on the task bar button.  The current Photoshop button moves to the right and back too fast.  This all happens very quickly as the window loses focus.
    I first thought it was some another program but after many searches found nothing I can identify as the cause.
    Right before posting this I had a thought and did a test that concluded in the 5 sec rule. For over a minute I held down the alt key and made a mouse click within the 5 second window of time and there was no loss of window focus.  While still holding down the alt key in this same test but not making a mouse click within 5 seconds the window lost focus and the tool stopped with my selection.
    I have a wireless Logitech M305 mouse that this morning updated the driver to its current version 5.20.51, Control Center version: 6.20.50.
    I have not tested a wired mouse, yet.
    Any help would be appreciated.  Anyone else seen this?  Windows 7 64 bit the culprit?????
    Message was edited by: golfnut333

    UPDATE
    After I removed Photoshop from Norton 360's Administrative Settings_Silent Mode Settings_User-Specified Programs, I did not have the problem with the lasso tool that I first had with loss of window focus.  I then put Photoshop back in the 360's settings and the lasso tool still worked, BUT...............
    After a couple of days of not using Photoshop and turning computer on and off in that time, I tried Photoshop again and the same problem, it came back.  Loss of focus after 5 seconds of not clicking mouse.  So, once again I open Norton and took Photoshop out of the User-Specified Programs and the problem went away, no loss of focus.
    So, I will see if after a couple of days of turning on and off the computer and NOT putting Photoshop in the Norton's User-Specified Programs setting if the problem stays fixed.
    I don't have to have Photoshop in the Norton's setting I just thought that it would be a good idea so Norton didn't try to do any background processes or whatever while I was working in Photoshop or I was rendering a filter or something.
    Another thought I also have the Full Screen Detection setting ON.  I do use Photoshop in Full Screen mode so maybe when having both the Full Screen mode and User-Specified Programs setting selected it makes something go wacky.
    Hope this helps anyone having the same problem I "did".  Will post back after a few days to let you know if focus problem is gone.
    If it does relieve the problem then I will leave Photoshop off the list in Norton.  No sense in trying to fix something that really doesn't matter, really.
    UPDATE 2
    January 8, 2011, I tried the lasso tool again and it still appears to be working. I did my standard test of holding the alt key and clicking to make selections then not click for 5 seconds or more and I did not lose window focus.  I do not know why the Norton 360 setting triggers the loss of focus but since I turned that setting off I'm not having any problem.
    Will update again if something changes.
    Anyone else out there with the same problem that was solved using this method?
    Message was edited by: golfnut333

Maybe you are looking for