Problem using N.A.S. (via smb) after update SL 10.6.6 (folder settings)

Hi everybody,
after updating my system, Finder doesn't seem to remind my settings on a smb:// folder, in particular text size is always 0, icons are too small and so on... Even if I put back settings in the right way, next time I see all wrong once again. Of course when I was on SL 10.6.5 I didn't experience nothing bad at all.
Somebody had similar issues? Thanks.

Hi,
I have noticed the error occurs when I copy files from my Mac to any samba server (I run OpenSuSE on a Phenom-X4 and Ubuntu PPC on an old iBook-G3). However when I copy to a file share on a PC running Windows Server 2003 I do not get any file copy problems.
Reading and executing files from mounted samba shares or windows shares did not seem to have any issues.
For the moment I have relegated myself to copying files to a Windows OS running on a virtual machine in my Phenom-X4 and then logging into the VM and copying the files a second time to the samba share but I would appreciate anyone posting further on this issue. Because of my experiences I believe the issue is an incompatibility with the Samba servers after upgrading to 10.6.3.

Similar Messages

  • After updating to Yosemite, my screen saver settings are not maintained.  The screen saver reverts to some Apple default.  There is no way to get my setting to be maintained.

    After updating to Yosemite, my screen saver settings are not maintained.  The screen saver reverts to some Apple default.  There is no way to get my setting to be maintained.

    Hi ..
    Might be corrupted preferences.
    Open the Finder. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following:
    ~/Library/Preferences/com.apple.screensaver.plist
    Click Go then move the com.apple.screensaver.plist file to the Trash.
    Restart your Mac then reset your screen saver.

  • Can't Connect to OS X Server 10.6.4 using AFP - but can via SMB

    OK, I'm stumped. This is a brand new Mini server running OS X Server 10.6.4. I can connect from 10.5 and 10.6 clients using SMB but not AFP. Access to all services is set to 'Allowed' so it's not a service restriction.
    Server has good DNS resolution for itself. This happened using OD and then I demoted it to Standalone to see if that would make any difference. None. Rebooted several times.
    The AFP logs show this when a user tries to connect:
    IP 192.168.111.4 - - [29/Jul/2010:22:24:28 -0500] "Login adam" 0 0 0
    IP 192.168.111.4 - - [29/Jul/2010:22:24:30 -0500] "Logout adam" 0 0 0
    But on the client side you get a dialog "There was an error connecting to the server. Check your connections and try again."
    Possibly related to this, not all folders show up in the share when connected via SMB. All folders are there when viewed on the server though. Have forced share permissions down the tree several times. Reboots. Nada.
    Thoughts? Never seen this happen before in many years of OS X Server work.

    I have exactly the same issue --
    Have an Xserve running 10.6.4
    File Sharing is setup.
    Can access files using SMB but not AFP --from Mac OS X 10.5.8
    Can access perfectly from Windows 7.

  • Unable to update apps in-phone or via iTunes after updating iOS

    Hello!
    I'm using an iPhone 4S, jailbroken with redsn0w, with an Orange SIM card in France. I've tried using three country settings for my Apple ID (same email address, linked to my bank accounts in the US, UK, and France). The phone was working perfectly on iOS 5.1, but after updating to iOS 6, I haven't been able to update the apps on the iPhone. The apps are up-to-date on iTunes on my computer, but I can't get them to sync to the phone (despite there being no obvious problem [e.g. error message] on the computer end). When I tap the 'Update' or 'Update All' buttons in the iPhone app store, the buttons turn a darker shade of grey, and then nothing happens. Everything else is working fine.
    I've tried the standard 'hold down the power and home buttons' and some of the other suggestions on here, such as changing the time to a year in the future. Any other ideas would be gratefully welcomed!

    hi, Brett - I'm having a problem now restarting my iPhone.
    iTunes (yep, it's the latest Windows version) keeps crashing ("iTunes has stopped working" message).
    The installed apps are blacked out with text beneath the icon "Waiting".
    And iTunes crashes on step 4 of 4 (Syncing Apps to John Alton iPhone 5S - step 5 of 5). Starts on the first app it tries to reinstall / sync.
    I am manually installing each application because I'm unable to bring back from syn. (On the iPhone, in App Store, go to Purchased > Not on this iPhone,
    But I'm still unable to run iTunes because it crashes while attempting to re-load the applications and data.
    Little help?
    thanks,
    John

  • Problem with login in to nokia store , after updat...

    Can anyone help me, after update to belle , my n8 wont log on to nokia store.

    Hey RadeJuve, Welcome to the Nokia Forums.
    Please try download Store QML from Betalabs and try log in.
    If this does not work please visit the Nokia Website or call your local Nokia care line and try reset your password and try relog in.
    I hope this helps and your issue is resolved swiftly.
    Sheldrick
    Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

  • Problems with iMessage syncing to multiple devices after update

    After updating to iOS 6.1.3 & OS 10.8.3 I can no longer send/receive iMessages from my cellular number.  iMessage won't sync between phone & computer.  Thoughts?

    I found an answer thanks to
    Ryneeev
    Re: iMessage iMessage Waiting for activation Help 
    Mar 10, 2012 6:07 PM (in response to Mezoabo)
    Don't waste time with all of that crap....
    Just update your date/time settings:
    Settings
    > General
    >> Date & Time
    >>> Set Automatically:  Slide "ON"...If it's already on, then slide it off, chill for a bit (maybe restart it), then slide it back on.
    I literally* just did this, saw a link for this thread, and figured i'd come see if it worked for you.  Mine hasn't worked since early January and for a while I wasn't getting texts from some other iPhone users either.
    I have an iPhone 4, but I assume it will still work for you.  I also have iOS 5.1 (just updated after plugging into iTunes on my mac), so that may make a difference, but I think it's just a network thing.  When you disable "Set Automatically" for time, I figure that you are also denying access to a part of the network that is necessary for iMessage.
    **EDIT**
    I also forgot to mention that, despite Apple's excluvisity, you still need to rely on an internet connection to use this little feature.  After you activate, it will even have an option to send as a regular text (SMS) when iMessage isn't available (when there is no or very little internet).  I'm assuming that sliding to "no" will just save the message until you connect again.

  • No devices can be found via bluetooth after update to ios 7.1

    Hallo Guys and Ladys!
    Im sry for my bad english, but i hope u can understand me request.
    Its exactly the problem, where u find this thread.
    I updated to ios 7.1 and at the next day i wanted to connect my iphone5 with my car-radio to play my favourite classic-music. I waited 5min. to find my radio on the iphone, but nothing. I searched for my laptop, it wasnt found. I cant found any bluetooth capable device on my iphone. But every device can find MY IPHONE. I found it from my laptop and can connect to it.
    But there is a problem with my car-radio. My car radio has no a search-function, so i NEED to found my radio with my iphone to connect to it.
    I resetted my iphone to factory settings and did NO backup, to have my iphone naked. But i cant find any devices too.
    I have no idea what i can do know.
    Does anyone have the same problem and does anyone know how to fix that bug?

    Hello Cypherpol,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Troubleshooting car stereo connections
    http://support.apple.com/kb/ts3581
    iOS: Troubleshooting Bluetooth connections
    http://support.apple.com/kb/TS4562
    Have a nice day,
    Mario

  • ZEN micro: problem with song/album/title/genre renaming after update - pls he

    hi!
    after updating my zen micro to the new firmware (playforsure) and the necessary software update of the media source organizer - i wasn?t able to rename the title on the player - like before the update: it'ss only possible to rename them one by one and not e.g. a full album (genre).
    BTW: why has the user interface changed that much - all songs i?ve arranged before the update had to be rearranged and that isn?t possible anymore in the way it was before...
    thx

    You can try these two:
    http://www.mp3tag.de/en/index.html
    http://www.snapfiles.com/get/godfather.html
    If they're not to your liking, try Google. These are not the only ones, but they're good (and free). Tag & Rename is also very good, but it costs a few bucks.

  • Problems with billing info in app store after updating my iphone 4s

    i just updated my iphone and all my apps were gone, when i try to download one,  it says i have to review my billing info and its all ok and my bank account has funds available. it says the security number is incorrect but it is not. can anyone help me please

    Same here.  No 3G connectivity on iPhone 4S after update to iOS 8.0.2

  • Problem using '--' on a variable via a pointer

    Hello.
    I'm new to C (been learning just over a week now), so if you take the time to reply - please don't pitch the answer too high!
    I've just finished work on my latest project - a Sudoku Solver. It only does simple puzzles, but it (finally) works.
    Here's a basic run-down of what it does: a user enters the known numbers of a Sudoku grid, line by line, and the program assigns these to an array (if the number is unknown, the relevant part of the array is set to zero). The array also holds a 'possibles' value for each cell, which says how many numbers are still potential values for that cells (so, when the user's input is first translated into the array, this value will be nine for an empty cell).
    A series of structs are then set up, one per cell, which hold various bits of information about each cell. The main things are the coordinates for each cell, together with whether each number (one to nine) is a possibility for that cell, and the total number of possibilities for that cell (which is a pointer to the 'possibles' value in the array, mentioned earlier).
    The solving loop is split into two parts. The first goes through each struct, and determines whether the value for that cell is known or not. If it is, that value is removed as a possibility for each cell in its row, column, and box.
    The second part of the loop goes through all cells and, if only one possibility exists for a cell, assigns that as the final answer in the array. The solving loop then continues until all cells are solved.
    My problem came when reducing the 'possibles' value for a cell in the array, via the struct. My first attempt used this line:
    *mySudoku[j].possibles--
    ('mySudoku' is the name of the struct type; 'j' is a value (0-81), and 'possibles' is a field that points to the value in the array that holds how many potential answers there still are for that cell). In my mind, that code snippet should point at the address held in that struct's field, and reduce it by one.
    After much banging of head against a wall, I discovered that the above code snippet wasn't doing the same as:
    *mySudoku[j].possibles = (*mySudoku[j].possibles)-1
    Once I'd changed the code over, the program worked like a dream.
    My question is: why aren't those two bits of code doing the same thing? I've obviously misunderstood something fairly basic, but I can't understand what.
    If any of my explanation isn't clear, then please let me know and I'll clarify.
    Thanks for your time,
    Pete.
    Message was edited by: Pete_M2

    Pete_M2 wrote:
    *mySudoku[j].possibles--
    *mySudoku[j].possibles = (*mySudoku[j].possibles)-1
    My question is: why aren't those two bits of code doing the same thing? I've obviously misunderstood something fairly basic, but I can't understand what.
    In a word, precedence. The first operation performed is the array subscript. Then the member selection via ".". Next is postfix decrement. The pointer dereference is done last.
    You should probably use parentheses to clearly specify the order in which you want operations to be performed. I am and have always been virtually clueless about precedence. I always use parentheses to clearly indicate what I want to be done. Even if they are redundant, they still help to clarify the situation.
    I would have written the above code as:
    --(*mySudoku[j].possibles)
    I would use prefix decrement because I don't need the pre-decrement value. I use the parentheses for clarity even though they supposedly aren't needed with prefix decrement. I say "supposedly" because I really have no clue. I have been programming for 20 year and the only precedence I know is parenthesis trumps all (usually).

  • Problem using Express over Ethernet via Solwise Gigabit Homeplug

    I am hoping someone can help me here.
    Similar problem with Tandie (http://discussions.apple.com/thread.jspa?messageID=12175903&#12175903). I have a Vista PC which has no problem at all to connect to my Express over ethernet. I use my Express to "Create new wireless" network and stream my itunes over ethernet, which works well if I have a cable connected to the Express to my network where my Vista PC is connected.
    However, when I take my Express to another room and connect it to a Solwise Gigabit Homeplug and my other homeplug connects to my network I then seem to have problems. The homeplug works perfectly with my PS3, but my Express after about 2 hours itunes and Airport Utility is unable to find it. I can however ping the Express, but that is it.
    Here's how I configured the AX:
    Wireless Mode = Create a wireless network
    Wireless Network Name = unique name different to my Wireless BT Hub
    Radio Mode = 802.11n (802.11b/g compatible)
    Channel = Automatic
    Click the Internet icon
    Connect Using = Ethernet
    Connection Sharing = Share a public IP address
    AX Firmware ver: 7.4.2
    Message was edited by: Charles266

    Welcome to the discussions, Charles266!
    However, when I take my Express to another room and connect it to a Solwise Gigabit Homeplug and my other homeplug connects to my network I then seem to have problems.
    Connection Sharing = Share a public IP address
    This would be the correct setting if your AirPort Express is connected directly to a simple modem (a simple modem has only 1 ethernet port)
    If you have the Express connected back to another router (it will have 3-4 ethernet ports), then the correct setting for Connection Sharing would be "Off (Bridge Mode)"
    I can't say if this will solve your problem. If you continue to have issues, then test using an ethernet cable from the Express back to your main router. If this works well, then one or both of the powerline products is suspect.

  • Fascinate problem with app sharing links via email after Froyo upgrade

    Since the Froyo 2.2 upgrade, I've noticed that anytime I select "Share" via email from an app - the Title is included in the email message, BUT NOT the the actual link.  This happens with all news apps and other apps.  Good grief.  I'm 7 months into a 2-year contract and sooooo tired of bugs with this phone (Samsung Fascinate).  Wish I'd waited for the iPhone.  I know iPhones are buggy too, but this droid situation is like a friggin free-for-all sometimes.

    Hi cygnetswan,
    I apologize for the delayed reply and understand your concern regarding the Froyo update.  I would suggest  deleting then re-adding your email account  and clearing the cache for the specific app you are trying use.  
    To clear the cache go to: Menu>Settings>Manage Applications>All>Select the app you are using>Clear Cache.  To delete your email account: Menu>Accounts & Sync>Select your email account>Remove Account.  Please follow the previous steps to re-add your email account.
     Additionally there was a software update released on June 08, 2011.  If you have not already complete the updated, I have attached the link: Software Update.  I hope these steps resolve your issue, if not please let me know.
    Thank you for your patience,

  • Problem Using Flash FLV Video Via Dreamweaver CS3

    I have been unable to get my FLV video to play on my website.
    I seem to have two problems:
    1) I want the FLV file to be hosted in a different domain to
    the website itself (for bandwidth reasons) and it doesn't want to
    do that!
    2) I would prefer to use Flash skins rather than Dreamweaver
    skins as I want to offer a full-screen option but I cannot get them
    to work!
    If I host the FLV file on the website domain, the video plays
    ok. If I change the file location in the Properties of the movie to
    become the FLV located on the other domain (using full path
    http://<etc>flv) then nothing
    displays on that part of the page. Firebug tells me it has loaded
    the AC_RunActiveContent.js and FLVPlayer_Progressive.swf but it
    makes no mention of the skin file or the flv file itself ... it is
    as if it just simply has not bothered with it! I suspect I am
    missing something obvious but cannot find it. All help would be
    appreciated. By the way, I have loaded up a crossdomain.xml file to
    the root of the domain that hosts the flv file but that didn't seem
    to make any difference!
    The second challenge is that ideally I would like to use a
    Flash skin so that I can have a full-screen option and so that I
    can have the menu bar under the video itself. However, I can't even
    get that option to work when I host the whole lot on the normal
    webserver! I am suspecting that it might be something that might
    suddenly start working when I fix problem 1. However, if anybody
    has any links to a page that provides simple instructions about how
    to do this task I would greatly appreciate it!
    Many thanks for your help!

    1) Why not post your video to YouTube or Google Video and
    then embed the
    code they provide into your website. This way their servers
    carry the
    bandwidth for you and the scripted embed code will work on
    your site.
    2) If Video sharing isn't an option, and you need more
    bandwidth, you can
    get domain hosting for as little as $4.95 - 6.95/month at
    Bluehost,
    Lunarpages or Web Hosting Pad.
    Nancy O.
    Alt-Web Design & Publishing
    www.alt-web.com

  • Problems re-connecting my PSP to Network, after updating to firmware 1.33NA on my D-Link DIR-655

    Hi everyone,
    Here is the 411 about my network
      Your Network Magic Version installed= : 5.5.9195.0-Pure0 
    The type of connection to the Internet, like DSL, Cable, or Verizon FIOS Internet Connection: = Comcast Cable 20K up / 5K down
    The Brand of Modem and its Model Number the router is connected to:   cable modem = ARRIS: TM602G/CT 
    The Brand, Model, Hardware Revision of your Router and include the Firmware Version:=   Router = D-LINK DIR-655 A3 Firmware (rev.1.33NA)
    The Method of connection your problem computer has to the Router: Wired or Wireless: Wireless
    The Connection in use on the problem computer: Wireless g/b/a on PSP
    Operating system and version and Service Pack Level, N/A      Also if any Anti-Virus Program or Spyware Program is actively protecting your computer.
    Include your location in the post or fill out your Profile for this forum and include the location. (Reason: Not all Routers from a given manufacturer are available everywhere.)    (Camden County)  Southern NJ, USA
    Post the link to your Router Model,  http://www.dlink.com/products/?pid=530 
    And any other information you think is important if answering your own post, and the nature of the problem, itself.
    I have had a full functioning network with D-Link DIR655  hardware Rev A3 firmware rev 1.33NA,
    with 5 PC's Dell XPS 730x, Alienware m17x,  Studio 1747,Studio 1749(touchscreen) Studio, 14z all using Windows 7 Professional 64-Bit, and one Macbook Pro 17", Plus a Dell mini 9 hackintosh( I did purchase  Retail10.5.4  and I placed the Apple stickers over the Dell logo.[ also have a PS#, and PSP 3000 (both have latest Sony firmware updates.]
    All PC's with Win7 Pro x64,'s are connected using Network Magic Pro 5.5 pure-0, with the exception of the Macbook pro OS X 10.7 and hackintosh Mac X10.5.8  which both use the Mac version 4 network pro (Ver. for mac os x.) of which I bought a 3 pack, (To have them work with NWM 5.5 Pro, & share both files, and printers with the windows PC's)
    Everything was working great until I updated the firmware on my DIR-655 from 1.2NA to 1.33NA.
    Since then I have been unable to reconnect my PSP to the network. using  WPA 2 security, which is what I had before the firmware update. If it wasn't for the security additions, this firmware upgrade adds  to the router, I would have gone back to the previos version.
    Here is what I've done in attempts to fix, and then my final solution.
    In Network Magic 5.5, I have tried shutting off the network protection feature, and I also re-added the MAC Address, of the PSP to the Router's list of allowable hardware, when I added my list of all the others..
    The PSP will start the handshake with the router, and then pause at the getting IP address screen, and finally timeout.
    I is showing up on the Network Magic 5.5 Pro's Network Map area, which leads me to believe it is being seen and let in by the software's security feature.
    I also tried to manually add an IP address, for the PSP, using the IP addy, it always seems to grab via DHCP [192.168.7.172] only to have it timeout the same way as it did before, with DHCP
    As I needed Internet access to update the PSP and make purchases from the PSN, I decided to connect my older Linksys WRT54G (HW Ver 5) Ver.1.02.8 (I'm considering the DD-WRT firmware for all it's improvements) to the DIR-655 with a CAT 6 cable. Network magic see's this router, as I added it's MAC address to the D-Link MAC filter first.
    I was able to use WPA Security with this router and the PSP connected without any problem.
    I thought maybe something was wrong with the PSP-3000, but I'm able to connect to a friends Belkin router
    , using WPA 2
    I setup the WRT54G using the studio 14z, as it's the lightest of my portables, with windows on it.
    Should I add Network Magic 5.5 to the network that is my Router & PSP?
    [I have a older thinkpad, that runs Windows XP SP3, which has just been sitting around, and my NWM 5.5 
    license is for 8 PC's and 3 Macintosh Computers.
    Thanks in advance.
    Regards in getting my network correctly secured once again,
    DakotaJoe

    I hate being the bearer of bad news, but from what I have read on the Forum and FAQ, you will need to un-install Network Magic from all of your computers making sure that no NM settings folders are left behind under users.  Then unplug all wired computers and rebuild your network by re-installing NM  in each computer before connecting it to your router.  After you have added all of your wired computers, set up your wireless network and install NM and add each wireless computer.
    That is a lot of work.  I hope this helps.
    Gary

  • I can no longer sync my calendar via USB after updating to Mavericks.

    Updated to Mavericks, set up iCloud but itunes (11.1.5) will no longer sync calendars with my iphone.
    Worked fine under osx10.8 before the update.
    I phone is an old 3g running ios 3.1 (yeah, I know it's old) so I realize that wifi syncing will no longer work.
    I would like to be able to sync my calendar via USB. Otherwise, sycing music etc via cable still works fine.
    Please don't just suggest that I buy a new phone. I will soon. But in the meantime I would like to solve this problem as it has caused me trouble with missed meetings and conflicting timetables.

    Yes, there are many posts on it. It is no longer possible in Mavericks to locally sync Calanders and Contacts via USB. Nut there are plenty of alternatives beside iCloud.
    Here are some solutions.
    https://discussions.apple.com/docs/DOC-6311
    Here is another
    http://www.apple.com/au/osx/server/
    Here is yet another
    If your Mavericks came with anything other than Mavericks pre-installed
    OS X Mavericks: Revert to a previous OS X version
    Also there are a host of other Cloud services you can use. You do not have to use iCloud at all. Although there ARE over 320+ million iCloud accounts presently active, so it is extremely popular with users.
    Pete

Maybe you are looking for