Problem using/opening Aperture 3.0 Library in Aperture 3.5.1

I have Aperture 3.0 Library that I opened in Aperture 3.5.1 and got this:
I did all repairs and rebuilds, but noting works. I can't access any PS file that I have, and the exports from the library looks like this:
Any suggestions how to save my images?
Thank you!

I accessed the raw files from the library , .psd and .nef, and tried to open, fail. I sent the files to a friend to try from his computer, fail again.
Marie,
to save the embedded jpegs from your RAW images, as Frank Caggiano recommended,  try the following in Aperture:
Save the original RAW files to a separate folder.
Set Aperture's Preference in the "Preferences > Import" panel to "Post Import Processing > Camera Previews".
Set Aperture to show the Browser, and not the Viewer or Split view. That is important. The idea is to prevent Aperture from opening the image after importing.
Now import your folder with the saved RAW files by dragging it onto the "Projects" in the Library panel.
You should be seeing perfect thumbnails without any corruption. Drag the thumbnails from the Aperture window to a folder on your Desktop. This should give you high quality JPEGs.
Your test image gave me a 4928x3264 high resolution JPEG.

Similar Messages

  • Can you use iPhoto as your referenced library in Aperture 3?

    Hi folks, new to the forum here and I've searched around older posts for an answer to this dumb question but can't seem to find it. Any insight much appreciated.
    I'm a relatively new mac user, migrated over just under 5,000 photos from Photoshop Elements on the PC to iPhoto on my new iMac and very happy with it. I was going to get the new PSE for Mac to use as my editor with iPhoto, but now that Aperture 3 is such a ridiculously good price on the App store I've been testing that out and I love it!
    So the question is, as I start to get more serious about my photography I would love to be able to use Aperture for everything - but the rest of the family just want the simplicity and great interface of iPhoto for the family shots. Can I / we keep importing, storing photos in the iPhoto library, and everyone else just uses that for the cropping, red-eye removal etc., but I can access the library in Aperture (sort of like a referenced library) make changes, add versions etc. without messing it up?
    Hope that makes sense, and again, apologies for what must be the millionth time this question has been asked.
    James

    In a word, no.
    Aperture and iPhoto are entirely different applications that work in very different ways.
    The only communication between the two is as follows:
    Aperture is able to parse the iPhoto Library to allow it to import the contents while stacking the Originals and Modified versions, preserving metadata and so forth.
    Aperture can share its Previews with the iLife apps, including iPhoto.
    That's it.
    So, specifically, what interaction there is between the two is designed to facilitate migration from iPhoto to the more powerful app. After that, iPhoto has exactly the same relationship to the Aperture Library as, say, Pages or iMovie.
    Regards
    TD

  • When I use Export Project to New Library in Aperture does it create a copy of the images in the new Library?

    I am going through my only library now and trying to better organize everything.  I am grouping my images into projects by year then cleaning up each year.  As I finish a year I use the Export to New Library option to create a library for each year.  My question is when I do this and I tell it to Consolidate Masters into exported library does it create copies of the images in the new library as well as leaving a copy in the original library?  My goal once I get this completed is to delete the original library but I certainly don't want to lose any of my images.  Just looking at file sizes for the libraries I can see that the main library never gets smaller and the new libraries don't really seem large enough to contain everything.
    Thanks.

    To be honest a 6 year old machine with 4gb of memory and 300gb of disk running Lion and Aperture  is not going to give you the greatest performance no matter how you split the library.
    You're going to need more disk, What's your backup procedure now? The best performance will be had by getting an external disk putting the masters on it as referenced and having the library on the internal drive.
    More memory would be nice but a 6 year old iMac, I think, is maxed out at 4. You'll need to keep other programs running to a minimum when you're working with Aperture.
    How much free space is on the internal drive? That will be an issue also. If even with the masters relocated to an external drive cause the internal drive to fill up you'll need to move the library off the internal. If you do that you'll want to go with a FW drive. As long as only the masters are on the external you can get by with a USB but once the library goes out there you're really want to look at FW.
    Hope this helps, post back if you have more questions
    regards

  • Problem using ADF Faces Runtime 11 Library

    Hi All,
    I am trying to use tr:Command link to open a dialogue.
    When i run my application including only the JSP Runtime, JSF 2.0, JSTL 1.2 and Trinidad Runtime 11 Libraries my application seems to work fine and a popup is opened.
    However when i include the ADF Faces Runtime 11 library the popup is opened in the same window as a web page.
    The same problem is also encountered when using tr:table with ADF Faces Runtime 11 library.
    The height of the tr:table changes dynamically with the number of rows displayed but when i include ADF Faces Runtime 11 library a fixed height is displayed for the table.
    I need to include the ADF Faces Runtime 11 library for fetching data from application module.
    Can anyone help me out or explain why this happens.
    I am using Jdeveloper 11G.

    Hi John,
    I am actually migrating a project from JDeveloper 10G to Jdeveloper 11G. As u suggested i have removed the ADF Faces Runtime Library from my classpath and included the ADF Model library. When i run my application i am getting the following exceptions.
    [Running application WebApproval42-11g on Server Instance IntegratedWebLogicServer...]
    [05:22:41 PM] Web Module WebApprovalModelWebApp.war recognized in project WebApprovalModel.jpr
    [05:22:41 PM] Web Module WebApprovalViewWebApp.war recognized in project WebApprovalView.jpr
    [05:22:41 PM] ---- Deployment started. ----
    [05:22:41 PM] Target platform is (Weblogic 10.3).
    [05:22:41 PM] Retrieving existing application information
    [05:22:41 PM] Running dependency analysis...
    [05:22:41 PM] Deploying 3 profiles...
    [05:22:41 PM] Wrote Web Application Module to C:\Users\roshan.lobo\AppData\Roaming\JDeveloper\system11.1.2.0.38.60.17\o.j2ee\drs\WebApproval42-11g\WebApprovalViewWebApp.war
    [05:22:41 PM] Wrote Web Application Module to C:\Users\roshan.lobo\AppData\Roaming\JDeveloper\system11.1.2.0.38.60.17\o.j2ee\drs\WebApproval42-11g\WebApprovalModelWebApp.war
    [05:22:42 PM] Wrote Enterprise Application Module to C:\Users\roshan.lobo\AppData\Roaming\JDeveloper\system11.1.2.0.38.60.17\o.j2ee\drs\WebApproval42-11g
    [05:22:42 PM] Deploying Application...
    [05:22:50 PM] Application Deployed Successfully.
    [05:22:50 PM] The following URL context root(s) were defined and can be used as a starting point to test your application:
    [05:22:50 PM] http://192.168.1.84:7101/WebApproval42-11g-WebApprovalView-context-root
    [05:22:50 PM] http://192.168.1.84:7101/WebApproval42-11g-WebApprovalModel-context-root
    [05:22:50 PM] Elapsed time for deployment: 9 seconds
    [05:22:50 PM] ---- Deployment finished. ----
    Run startup time: 9017 ms.
    [Application WebApproval42-11g deployed to Server Instance IntegratedWebLogicServer]
    Target URL -- http://127.0.0.1:7101/WebApproval42-11g-WebApprovalView-context-root/faces/index.jspx
    <Oct 4, 2011 5:22:51 PM IST> <Error> <HTTP> <BEA-101017> <[ServletContext@23231866[app:WebApproval42-11g module:WebApproval42-11g-WebApprovalView-context-root path:/WebApproval42-11g-WebApprovalView-context-root spec-version:2.5], request: weblogic.servlet.internal.ServletRequestImpl@75795c[
    GET /WebApproval42-11g-WebApprovalView-context-root/faces/index.jspx HTTP/1.1
    Accept: */*
    Accept-Language: en-us
    User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.3)
    Accept-Encoding: gzip, deflate
    Connection: Keep-Alive
    Cookie: username=; role=; rolepwd=; datasource=; appName=; terminal=
    ]] Root cause of ServletException.
    java.lang.IllegalArgumentException: null source
         at java.util.EventObject.<init>(EventObject.java:38)
         at javax.faces.event.SystemEvent.<init>(SystemEvent.java:71)
         at javax.faces.event.ComponentSystemEvent.<init>(ComponentSystemEvent.java:73)
         at javax.faces.event.PostRestoreStateEvent.<init>(PostRestoreStateEvent.java:73)
         at com.sun.faces.lifecycle.RestoreViewPhase.deliverPostRestoreStateEvent(RestoreViewPhase.java:265)
         Truncated. see log file for complete stacktrace
    >
    <Oct 4, 2011 5:22:51 PM IST> <Notice> <Diagnostics> <BEA-320068> <Watch 'UncheckedException' with severity 'Notice' on server 'DefaultServer' has triggered at Oct 4, 2011 5:22:51 PM IST. Notification details:
    WatchRuleType: Log
    WatchRule: (SEVERITY = 'Error') AND ((MSGID = 'WL-101020') OR (MSGID = 'WL-101017') OR (MSGID = 'WL-000802') OR (MSGID = 'BEA-101020') OR (MSGID = 'BEA-101017') OR (MSGID = 'BEA-000802'))
    WatchData: DATE = Oct 4, 2011 5:22:51 PM IST SERVER = DefaultServer MESSAGE = [ServletContext@23231866[app:WebApproval42-11g module:WebApproval42-11g-WebApprovalView-context-root path:/WebApproval42-11g-WebApprovalView-context-root spec-version:2.5], request: weblogic.servlet.internal.ServletRequestImpl@75795c[
    GET /WebApproval42-11g-WebApprovalView-context-root/faces/index.jspx HTTP/1.1
    Accept: */*
    Accept-Language: en-us
    User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.3)
    Accept-Encoding: gzip, deflate
    Connection: Keep-Alive
    Cookie: username=; role=; rolepwd=; datasource=; appName=; terminal=
    ]] Root cause of ServletException.
    java.lang.IllegalArgumentException: null source
         at java.util.EventObject.<init>(EventObject.java:38)
         at javax.faces.event.SystemEvent.<init>(SystemEvent.java:71)
         at javax.faces.event.ComponentSystemEvent.<init>(ComponentSystemEvent.java:73)
         at javax.faces.event.PostRestoreStateEvent.<init>(PostRestoreStateEvent.java:73)
         at com.sun.faces.lifecycle.RestoreViewPhase.deliverPostRestoreStateEvent(RestoreViewPhase.java:265)
         at com.sun.faces.lifecycle.RestoreViewPhase.execute(RestoreViewPhase.java:251)
         at com.sun.faces.lifecycle.Phase.doPhase(Phase.java:101)
         at com.sun.faces.lifecycle.RestoreViewPhase.doPhase(RestoreViewPhase.java:111)
         at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:118)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:312)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:173)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:293)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:199)
         at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
         at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    SUBSYSTEM = HTTP USERID = <WLS Kernel> SEVERITY = Error THREAD = [ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)' MSGID = BEA-101017 MACHINE = Aptbngdst189 TXID = CONTEXTID = 9948ba59687be1d8:18e4db26:132ceba77f1:-8000-0000000000000123 TIMESTAMP = 1317729171443
    WatchAlarmType: AutomaticReset
    WatchAlarmResetPeriod: 30000
    >
    I am not able to figure out as to what is acusing this exception.
    Can u please help me out.
    Note: The application works fine when i include the ADF Face Runtime library but i have the look and feel and popup issues as mentioned earlier.

  • Problems using "open items" command in ARD

    Hi,
    Having problems while using the "open items" command from ARD. The "Copy" function works well but when trying to open the file I get the message "Failed".
    I suppose I am doing something wrong, any help is appreciated!

    ...  having problems ...
    We don't know what problems you are having

  • Problem using iTunes restore to transfer library to new PC

    I have used iTunes 8 to back up my entire library to 5 DVDs following the instructions at http://support.apple.com/kb/HT1382
    When I insert the DVDs in my new PC I get the option in iTunes to restore from the DVD's - which I do. However about 50% of my music is missing after restoring from the 5 DVDs - also none of the Playlists are restored.
    Any ideas on what is hapenning here?

    OK so some more detail.
    As I restore from each DVDs it goes fine for while - but eventually a dialog pops up saying that I do not have enough privileges to write to C drive. It happens at a different place each time. When it happens it stops copying from that DVD and asks for the next one. I have checked and I have write privileges for the music and library folders. Any ideas?

  • Using Open Test Architecture (OTA) Library Methods In TestStand

    Hello,
    I am trying to find information on how to use the OTA library that HP provides to control their HP Application Life-cycle Management (ALM), formerly HP Quality Center, test tracking software. I want to use ActiveX actions in TestStand that will create test runs, load in generic information about the test (pass/fail, tester name, timestamp, etc.), and attach the log file to the test run.
    I have only gotten so far as logging into my desired HP ALM project, sent an email from HP ALM to myself (subject, and message, nothing really valuable), and logging out of said project. When I try and create an object for getting information from certain fields in HP ALM as a "proof of concept," I run into the issue where I cant create the object type I need in order to use the methods I want. I think I should be making an ITestFactory object in order to get the data from the fields, but the option to "Create Object" is greyed out in TestStand when I select that object class.
    Could someone with experience please help me out?
    Thanks,
    Mitch M.

    Hi Mitch_M,
    As you pointed out, for questions about OTA it is better to contact HP. However, here are some links about ActiveX inTestStand that I think may be useful to you.
    http://www.ni.com/white-paper/2984/en/
    http://zone.ni.com/reference/en-XX/help/370052G-01/tsref/infotopics/pane_module_activex/
    http://zone.ni.com/reference/en-XX/help/370052M-01/tsapiref/reftopics/teststandobjects/
    I hope you find this information useful.
    Regards,
    kruiz17

  • Problem using open dataset

    Hi All,
      I am trying to upload flat file data into appl server.but it is uploading some unwanted characters at the end.The code and data is given below.plz let me know the solution.
    DATA : file type rlgrap-filename.
    data : begin of itab occurs 0,
             rec(500) type c,
           end of itab.
    file = '/lz01/fin/in/bop_Checkrecon1.txt'.
    clear : itab.
    refresh : itab.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        FILENAME                      = 'C:\bop3.txt'
       FILETYPE                      = 'ASC'
      HAS_FIELD_SEPARATOR           = ' '
       HEADER_LENGTH                 = 0
       READ_BY_LINE                  = 'X'
      DAT_MODE                      = ' '
      CODEPAGE                      = ' '
      IGNORE_CERR                   = ABAP_TRUE
      REPLACEMENT                   = '#'
      CHECK_BOM                     = ' '
      VIRUS_SCAN_PROFILE            =
    IMPORTING
      FILELENGTH                    =
      HEADER                        =
      TABLES
        DATA_TAB                      = itab
    EXCEPTIONS
       FILE_OPEN_ERROR               = 1
       FILE_READ_ERROR               = 2
       NO_BATCH                      = 3
       GUI_REFUSE_FILETRANSFER       = 4
       INVALID_TYPE                  = 5
       NO_AUTHORITY                  = 6
       UNKNOWN_ERROR                 = 7
       BAD_DATA_FORMAT               = 8
       HEADER_NOT_ALLOWED            = 9
       SEPARATOR_NOT_ALLOWED         = 10
       HEADER_TOO_LONG               = 11
       UNKNOWN_DP_ERROR              = 12
       ACCESS_DENIED                 = 13
       DP_OUT_OF_MEMORY              = 14
       DISK_FULL                     = 15
       DP_TIMEOUT                    = 16
       OTHERS                        = 17
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    open dataset file for input in text mode encoding default.
    clear itab.
    loop at itab.
       transfer itab-rec to file.
       clear itab.
    endloop.
    close dataset file.
    The exact structure and the data present in the flat file is as follows:
      078041953      0000000001000000052507       0000070000                   R   
      078041953      0000000003000000052507       0000199500                   R   
      078041953      0000000005000000052507       0000530000                   R   
      078041953      0000000007000000052507       0000005000                   R   
      078041953      0000000008000000052507       0000004000                   R   
      078041953      0001000000000000052507       0000058250                   R   
      029005582      0001000000000000052507       0000012300                   R   
      029005582      0001000001000000052507       0009438200                   R   
      030404975      0001000000000000052507       0000056700                   R   
      030404975      0001000001000000052507       0000004500                   R   
      314018577      0001000002000000052507       0000001500                   R   
      314018577      0001000003000000052507       0000435300                   R   
      314018577      0001000007000000052507       0000066600                   R   
    Thanks,
    Rakesh.

    Hello Rakesh
    If you display your flat file using an editor (like Notepad) then the file may look ok. However, there may be special characters at the end of every line that are not displayed.
    Use the following approach to analyze your flat file:
    (1) Start Microsoft Excel
    (2) Open your flat file from with Excel. Be careful to choose the right <b>Codepage</b> in the <i>Text Converter Assistent</i>. For example, located in Switzerland I would most like choose Codepage = Windows(ANSI) or  1250 Middle European (Windows)
    (3) Scroll to the end of lines and check if there are special characters
    Regards
      Uwe

  • Aperture previews/Can't see Aperture library in other apps.

    This isn't really a new problem for me, but I decided to ask now to see if it can be fixed somehow. I use Aperture 3.4.5, OSX 10.8.4. The problem is that Aperture doesn't show up under the Media tab when in other apps. For instance, in Mail if I try to attach a picture. It shows iPhoto and Photobooth. But I get an error when I click on Aperture that tells me I need to turn on sharing to iLife in the preferences of Aperture. But this is turned on. Still no access to the Aperture library. Same thing in iTunes. Now, since my Aperture and iPhoto libraries are linked I can just choose the photos I want to attach from the iPhoto library. But I want to choose the Aperture library!!
    But it won't let me. I cannot add projects/folders to my iPhone or iPad in iTunes either. I get the same turn on the sharing message. And I have this turned on.
    I've seen a few other people with this problem in searches I have done but I have not seen any solutions...
    Help?!?

    So your Aperture library is in fact a previous iPhoto library.
    Correct. When I purchased Aperture, I imported from my iPhoto library. And I guess they are shared.
    I am still not quite sure about the state of your iPhoto/Aperture library.  Depending on when you bought Aperture, you may have imported the iPhoto Library into a new Aperture Library; then you now have an Aperture library, or you may have simply opened the iPhot Library in Aperture, keeping it an iPhoto Library.  The Finder can show you what it is.
    Select your library in the Finder and use the Finder command "Get Info ⌘I". The Info panel will show you the type of the library.
    Disclose the "General" brick in the panel. The "Kind" will either show "iPhoto Library" or "Aperture Library".
    Then disclose the  "Name & Extension" brick and look, if your library has a filename extension - aplibrary or photolibrary. Uncheck "Hide Extension" to see it.
    If your library still is "Kind iPhoto Library", then you never imported your Library, you only used it in Aperture.
    Or if you want to use iPhoto and Aperture with separate photo libraries, import your current library into a new Aperture library. Open your now empty Aperture Library in Aperture by double-clicking it. Then use the command "File > Import > Library" in Aperture and select your iPhoto library. This will import all events, albums, etc. into your empty Aperture Library  and craete a copy of the iPhoto library, but now it will have the kind "Aperture Library" and the Media Browser should show it in the Aperture section and not the iPhoto section. Only make sure, that you unhide all photos in iPhoto, before you do that. Aperture cannot unhide photos that have been hidden in iPhoto.
    My question here is if I go into my new Aperture Library, and import from iPhoto again (and I guess make them not shared?) Will it then *copy* my iPhoto library, which is 240GB. Then I would have 2 240GB folders??
    I appreciate the help so far. Right now I'm doing the generate preview thing again, which is taking awhile. But I'm guessing that since my iPhoto and Aperture libraries are linked and shared now this won't matter much. I will still only see iPhoto listed in the Media Browser..
    Let's talk about that part of your question when we know for sure, if you already imported your iPhoto library or simply opened it in Aperture. If your library is an Aperture library with an imported iPhoto library inside there may be additional complications.

  • How do I import images created in earlier versions of Aperture and saved to DVD as an Aperture library into Aperture 3.2.1?

    When I insert the DVD into my MacPro the disk appears as though it is blank, with the little 'burn' icon in the top right
    When I insert the DVD into my macbook it shows the full Aperture library structure and when I allow file sharing between the machines the MacPro can also recognises the files
    I suspect I am making a basic error somewhere as the images are clearly all there.  This doesnt just occur for one DVD, I have dozens that are all perfroming in the same way when I try to import files created in an earlier version of Aperture back into the version I am now using, 3.2.1
    Any suggestions would be greatly appreciated
    Reiss.

    To get the old library into Aperture it will need to be upgrade. To do this you will need to copy the library off the DVD onto our HD and then open Aperture on this library. Aperture should then upgrade the library to the latest version.

  • Why Even after buying it shows Aperture 3 Trial library?

    How to change "Aperture 3 Trial Library" to "Aperture 3 Library"

    Quit Aperture and then change the Library's name in the Finder. The next time you start Aperture you might get a window asking you to show it where your Library is. (You can have multiple Libraries and choose which is in use either by double-clicking on it or holding the Option key when you start Aperture.)

  • How do I restore my iPhoto. When I open i get a window dialog "Your iphoto library is either in use by another application or has become unreadable shut down and restart your computer. If problem persists, try rebuilding your iphoto library. To do th

    When I try to open iPhoto I get a window dialog that says...
    Your photo library is either in use by another application or has become unreadable
    Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup.
    I have tried the reopen it while keeping the Option and Command keyes pressed.
    No change.
    I dee nothing but a blank page,
    Any help would be appreciated.
    Also hace back ups of all images on cd's. dvds and jump drives.
    Any advice is appreciated.

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • HT1941 I have inadvertently changed a file permission setting. When opening Aperture I get the following; Aperture cannot access this library. To use this library make sure it's file permissions are set correctly. I am an old dude new to Mac OS. What up?

    I have inadvertently changed a file permission setting. When opening Aperture I get the following; "Aperture cannot access this library. To use this library make sure it's file permissions are set correctly". I am an old dude new to Mac OS. Looked in settings but have no idea how to allow file sharing to myself. I have been using Aperture actively for 6 weeks. I'm the only one using this Mac. What up?

    Back up all data now.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. You can demote it back to standard status when this step has been completed.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Drag or copy — do not type — the following line into the Terminal window, then press return:
    sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:20 ~ $_ ; chmod -R -N ~ $_ 2> /dev/null
    Be sure to select the whole line by triple-clicking anywhere in it. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning. If you don’t have a login password, you’ll need to set one before you can run the command.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2
    Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar. A text window opens.
    In the Terminal window, type this:
    resetpassword
    That's one word with no spaces. Then press return. A Reset Password window opens. You’re not going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select  ▹ Restart from the menu bar.

  • I can not open my Aperture or Iphoto library

    Hello everyone,
    I have the application Aperture where I edit pictures and can not seem to open it today when I try the message "To open this iPhoto library in Aperture, it first needs to be upgraded.Verify that you have iPhoto 9.4 or later. Then open the library in iPhoto to upgrade it." I upgraded Iphoto and then tryed to open Aperture while Iphoto was closed and I got the same message. Then I tried to open the Iphoto library and now the message "Your photo library is either in use by another application or has become unreadable.Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup. Aperture was not open at the time so I shut down then restarted my computer. The same Message Appered. Then I tried to rebuild the library by holding down the option and command key I tried all of the rebuilding options and when I went to rebuild it the same message opened in iphoto. Help me! I am a photographer with a website and need to get this up and running fast. I wanted to cunsult with Apple Support Communities before I make the trip out to the apple store.

    Also when I went to finder to see it the library existed its now labled Iphoto library copy. I have a time capsule and restored it back by a day and it didn't work I still got the same message in aperture and Iphoto.

  • Problem Using Aperture as an External Editor

    I'm having a problem using Aperture as an external editor for iPhoto. I've set preferences to "Edit in Aperture" and selected the Aperture application. When I click edit a photo in iPhoto, Aperture fires up as expected, but it does not load my photo. Nothing seems to be exported from iPhoto into Aperture.
    I can export the same photo to my desktop and then load it into Aperture fine.
    When I set preferences to edit in CS2, this works fine, only Aperture seems to be the problem.
    What am I doing wrong?
    I'm using the following versions:
    - iPhoto 7.0.2
    - Aperture 1.5.4

    If you have Photoshop CS2 then you'd have a better editor using it within iPhoto as follows:
    Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
    1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
    2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
    3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Maybe you are looking for