Problem using PC Suite to connect to internet

Any help would be much appreciated.....I have searched support discussions as well as general web, and no fix is to be found. Here is the issue:
I have connected my new n900 to my PC (WinXP, SP2) via PC Suite. Instructions to connect to the internet (on my PC, using the n900 as a "modem") are to click on "Connect to the Internet" in PC Suite.
When I do this, I receive the message "No modem found!" and "Make sure you have installed Nokia Connectivity Cable driver software". All support articles advise that this particular driver software is already part of the newest versions of PC Suite though. Also, there is no option to "Select a Modem" and the Configure clickthru is not accessible.
I have gone into Device Manager on my PC, and tried to update Driver under "Nokia USB Modem"....it states that the "Drivers for this device are not installed. Code 28." Searching for driver and reinstalling driver produce the message "Windows was unable to install the modem" and then "An error occured during the installation of this device, A service installation in this section INF is invalid".
I have uninstalled all Nokia related software through the Control Panel and reinstalled via download from NokiaUSA.....twice. Keep getting the same errors.
I have deleted all USB root hubs in Device Manager in case there was a resident conflict from my old Nokia n80, with which I used an older version of PC Suite.
I've restarted WinXP after all uninstalls and reinstalls of PC Suite.
Nokia seems to think it should be "plug n' play" to use PC Suite for internet access on my PC, but so far it isn't.......at all!
I've read articles about limited support for the n900 in PC Suite, but it doesn't seem as if this is part of that since Nokia has a tutorial about how simple this should be... see here: http://www.nokiausa.com/get-support-and-software/software/nokia-pc-suites/how-to/connect-to-the-web
Again, any help would be appreciated! Thanks in advance.
Nhoi

Any updates on this? Its still a problem for me. Maybe someone else is having the same issue. Im using a bluetooth connection .. maybe I should try a USB Cable.
Screenshot
http://i114.photobucket.com/albums/n277/moontore/BackupFailed.jpgMessage Edited by trotter on 02-Jan-2007
05:40 PM

Similar Messages

How do you resolve the problem of ipad not staying connected to internet. other laptops remain connected but ipad just disconnects after about 5 seconds.

how do you resolve the problem of ipad not staying connected to internet when other devices are connected. Ipad disconnects after about 5 seconds.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

E71 Using Nokia Suite to connect to the internet

This may be a Nokia Suite problem but the first time I add my E71, via Bluetooth, to Nokia Suite I can use the phone to connect to the internet successfully.
After I shut my PC down and reboot the connection will not work, Nokia Suite tells be that it "Cannot establish a network connection".
The cure is that every time I wish to use I have to remove the phone from Nokia Suite then add it in again.
This is a laborious process and should be totally unnecessary.
I'm using Windows 7, the laciest version of Nokia Suite, have the latest software on my E71 & all the latest drivers, Bluetooth etc, installed.
In functional terms it seems after that initial use something is not getting 'released' or 'reset' properly.
Nokia please help me why your software is not working.

Hey SirAguilera,
Cud u pls chck, if u hav enabled proxy settings on ur pc, if yes, make sure that Internet Explorer as ur default browser n then chck, if it works.
If my post helped you, click on Kudos button and if my solution provided is opt 2 u, accpt my solution

Problem using PC Suite via USB

I have a problem accessing my Nokia phone (E50) with PC Suite via USB, but since I pruchased it earlier on though, it never had this problem. My phone's connection settings via USB has been modified to let the phone be connected thru "PC Suite", and I have the USB wire that came with the phone. I had access to the contents of my phone just fine, until this week.
The problem is that the phone does connect, but my PC doesn't read any phone from the connection. I tried connecting the phone with four different USB sockets available, but no result. I tried reconnecting the phone with the USB wire, but it was futile.
Honestly, I do not know if the problem is from my phone or from the computer. My cousin, after all, came over for a slumber party during the weekend, and he visited websites that might have badware. [My computer restarts when I choose "Shut Down", it's working slowly at times, and it restarts if I bother downloading anything.] If anyone has an idea how I could resolve this connectivity problem, I'd most appreciate it.

Where this wonderfull place is located? I could not find out yet!
I should say that Nokia is to think more when making manuals on E71 et al/
Thanks ib advance

Open PC Suite & PC connects to internet immediatel...

Every time I open PC suite, my computer dials up to the internet. How can I stop this automatic connection?

I had exactly the same problem with the PC Suite when it updated itself to the latest version (PC Suite 7.1.40.1). Nokia could not provide any assistance.
I tried the OVI Suite in place of the faulty PC Suite (having read some of the postings here). It was of no use as the OVI Suite does not load the Calander Function at all - which is one of the two functions I need to synch - contacts and calander.
So much for having a smart phone that you cannot synch!!!!

Ovi Suite silently connecting to Internet via Phon...

Since upgrading to Ovi Suite (2.2.1.23) I've found that it will silently connect to the Internet via my phone (E72) if there is any interruption to my wifi connection. I guess that it's tyring to do something "smart" and keep my connection alive, but at the expense of my mobile data plan.
I've managed to spot this as the speed drops markedly, but I don't think that I'd be so lucky if I was in an Internet cafe etc. where the difference in service might not be so great.
I haven't seen anyone else report this exact issue, although Ovi Suite does seem keen to connect via the phone instead of established Internet for some operations.
So have I missed something in the setup that can stop this?
--------------------------- More info below: ----------------------------------------
Nokia Ovi Suite 2.2.1.23
PC Connectivity Solution 10.33.1.0
Connectivity Cable Driver 7.1.31.0
Nokia Ovi Suite Software Updater 2010.27.0.60741
Maps Service API 4.0.15.0
Nokia mPlatform 2.6.221
Ovi Desktop Sync Engine 1.3.0.32
Operating system:
Microsoft Windows 7 64-bit Edition
Language: English
Detected Bluetooth stacks:
- Microsoft (Version: 6.1.7600, Build: 16385), In use.
Phone:
S/W version: 051.018
Custom version: 051.018.C00.01
Model: E72-1
Type: RM-530

@mokrypes
This seems to be working now. I tried today to download US maps and it completed and installed without any issues. Guess there was some problem with the map server.
Cheers
Sandy
Helpful information, then dont forget to hit the kudos star :-) Or say it accepted solution and thanks

My Apple tv has connection problems. I receive not connected to internet or home sharing not on even though it is

Apple TV is allways asking me to turn on home sharing, home sharing is allready on so I have turn it off and then turn it back on. Also it is telling me that it is not connected to the internet even though I entered my network key correctly and all my other Apple wireless devices are working perfectly. Any ideas please ?

Having reread your post, i note you say you connected the thernet cable to a wifi extender, are you by any chance using the wifi extender when trying wifi and by extender do you mean a WDS extended network. I have seen quite a few reports that networks extended using WDS have problems.
Although it may be a weak signal, are you able to temporarily disable WDS to see if this resolves the connection issue.

After using hotel wifi,cannot connect to internet at home network

after using wifi in the hotels this week, i cannot connect to the internet via my home network. I'm connected to the wifi but, can't connect to the internet.

I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref:Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

Using my 8330 to connect to internet with a MAC & PC

I have two laptops, one is a Mac Pro - newest computer to the family. And the other is a PC running Windows XP.
I have the software loaded on PC to use my 8330 as a modem to connect to the internet.
My question is can I load the same software onto the MAC pro notebook and use as a modem with the mac as well. I started to do this from the Net, but decided since it appeared different, I would ask you guys first. Do not know if anything gets sent to the phone when it is connected to the PC that would be different on a MAC ?
anyone know ?
Key

Hi,
Late edit. Led you wrong.
You can't use the BB as a tethered modem straight up on the MAC, it might be possible with paralells to Windows XP as you suggested.
I remembered a KB that I read concerning MAC's and tethered modems.
Thanks,
Bifocals
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB05178&sliceId=1&docTy...
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Can I use my airport to connect to Internet with my Mac?

So I currently don't have internet on my iMac right now and so I tried connecting an airport express and making the airport join my current wireless network (since I don't think iMacs can join wifi by themselves), and I entered all the information about the wireless network I want to join, but when I reset my airport to these configurations my iMac can no longer connect with my airport so I'd like some assistance, and if it turns out trying to do this is impossible, I would also like to know that too, thanks.

So I currently don't have internet on my iMac right now and so I tried connecting an airport express and making the airport join my current wireless network (since I don't think iMacs can join wifi by themselves)...
There are numerous iMac models; which exact model do you have as most of the later models have built-in wireless capability? To find out, you can use System Profiler by first clicking on the Apple icon in the upper-left corner of the menu bar, and then, selecting the "About this Mac" option.
If your iMac actually does not have wireless and your AirPort Express Base Station (AX) is an 802.11n version, you could configure the AX as a wireless Ethernet bridge. Apple calls this a ProxySTA. In this configuration, you would configure it to join an existing wireless network (like you already did) but enable it to support a wired client. You would then connect the iMac directly to the AX by Ethernet.

Problems using ODBC Driver. Connection never opens.

Hi,
I have a problem with the ODBC driver for oracle.
This is the behaviour: the first attemp of connection doesn't work, the connection never opens. the second attempt is almost instantaneous but 10 minutes later the connection fails again. It is neccesary to close and open the app using the odbc driver again.
I've tried everything.
Thanks in advance,Regards.

Hi,
Quote: "ERROR [IM002] [Microsoft] [ODBC Driver Manager] Data source name not found and no default driver specified".
This error is typically thrown because the code is specifying a DSN that does not exist. So, please make sure you are referencing a DSN that has been created.
You can refer to this article below:
https://community.microfocus.com/borland/test/silk_test/w/knowledge_base/10737.how-do-i-resolve-error-im002-microsoft-odbc-driver-manager-data-source-name-not-found-and-no-default-driver-specified.aspx
Or please add the right conenction string. You can look at following website:
http://www.connectionstrings.com/
Note This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and
has not tested any software or information found on these sites.
Andy Altmann
TechNet Community Support

Using Maps when not connect to internet.

I just bought an Ipad 2 to replace a netbook. I am a pro-driver an my favorite app was to get detailed maps while on the road [or on the side trying to figure where to turn]
Sooooo.....is there a way to save maps on the Ipad so I can bring them up when I'm away from a wi-fi source?
Thank you in advance
RWR

There are many navigation apps in the AppStore that store the map data on the device without the need for a data connection.
Have a browse of the iPad Navigation section of the AppStore for something that suits your specific needs.

Problems using https protocol to connect to open a web site

Hi,
I am trying to connect to a web site from my java programme. When I try connecting using htpp protocol, I am able to open the web page then I am giving the username,password to login into that web site..its working fine.
But, When I try connecting using https protocol connection, I am not getting the page opened and after some time I am getting below error
Exception in thread "main" org.apache.xmlrpc.XmlRpcException: I/O error while communicating with HTTP server: Connection timed out: connect
     at org.apache.xmlrpc.client.XmlRpcCommonsTransport.writeRequest(XmlRpcCommonsTransport.java:244)
     at org.apache.xmlrpc.client.XmlRpcStreamTransport.sendRequest(XmlRpcStreamTransport.java:151)
     at org.apache.xmlrpc.client.XmlRpcHttpTransport.sendRequest(XmlRpcHttpTransport.java:115)
     at org.apache.xmlrpc.client.XmlRpcClientWorker.execute(XmlRpcClientWorker.java:56)
     at org.apache.xmlrpc.client.XmlRpcClient.execute(XmlRpcClient.java:167)
     at org.apache.xmlrpc.client.XmlRpcClient.execute(XmlRpcClient.java:137)
     at org.apache.xmlrpc.client.XmlRpcClient.execute(XmlRpcClient.java:126)
     at com.wipro.bugc.Test1.call(Test1.java:94)
     at com.wipro.bugc.Test1.main(Test1.java:124)
Caused by: java.net.ConnectException: Connection timed out: connect
Can anyone please suggest or give sample code to work with https web sites in java.
I will have to use only https protocol to open any browser as my server only opens the web pages using https protocol
Thanks in advance

Hi,
Thank you for your immediate reply. Please find the below code for your infomationa and please let me know where I am wrong..
Below is the example we used to connect to "rojects.maemo.org" site and end up with the error I mentioned in the previous topic.
package com.wipro.bugc;
import java.net.Authenticator;
import java.net.URL;
import java.security.cert.X509Certificate;
import java.util.HashMap;
import java.util.Map;
import javax.net.ssl.HostnameVerifier;
import javax.net.ssl.HttpsURLConnection;
import javax.net.ssl.SSLContext;
import javax.net.ssl.SSLSession;
import javax.net.ssl.TrustManager;
import javax.net.ssl.X509TrustManager;
import org.apache.http.HttpEntity;
import org.apache.http.HttpHost;
import org.apache.http.HttpResponse;
import org.apache.http.auth.AuthScope;
import org.apache.http.auth.NTCredentials;
import org.apache.http.auth.UsernamePasswordCredentials;
import org.apache.http.client.HttpClient;
import org.apache.http.client.methods.HttpGet;
import org.apache.http.impl.client.DefaultHttpClient;
import org.apache.http.protocol.BasicHttpContext;
import org.apache.http.protocol.HttpContext;
import org.apache.xmlrpc.client.XmlRpcClient;
import org.apache.xmlrpc.client.XmlRpcClientConfigImpl;
import org.apache.xmlrpc.client.XmlRpcCommonsTransportFactory;
public class Test1 {
    private static void install() throws Exception {
        // Create a trust manager that does not validate certificate chains
        TrustManager[] trustAllCerts = new TrustManager[] {
            new X509TrustManager() {
                public X509Certificate[] getAcceptedIssuers() {
                    return null;
                public void checkClientTrusted(X509Certificate[] certs, String authType) {
                    // Trust always
                public void checkServerTrusted(X509Certificate[] certs, String authType) {
                    // Trust always
        // Install the all-trusting trust manager
        SSLContext sc = SSLContext.getInstance("SSL");
        // Create empty HostnameVerifier
        HostnameVerifier hv = new HostnameVerifier() {
            public boolean verify(String arg0, SSLSession arg1) {
                    return true;
        sc.init(null, trustAllCerts, new java.security.SecureRandom());
        HttpsURLConnection.setDefaultSSLSocketFactory(sc.getSocketFactory());
        HttpsURLConnection.setDefaultHostnameVerifier(hv);
    public static void call(String url) throws Exception {
         HttpClient httpClient = new HttpClient();
         httpClient.setHttpConnectionFactoryTimeout(600000000);
        httpClient.getParams().setAuthenticationPreemptive(false);
       Credentials defaultcreds = new UsernamePasswordCredentials("username", "password");
       httpClient.getState().setCredentials(new AuthScope("projects.maemo.org", 443, AuthScope.ANY_REALM), defaultcreds);
          HttpHost targetHost = new HttpHost("projects.maemo.org", -1, "https");
          System.setProperty("proxySet", "true");
          System.setProperty("http.proxyHost", "xxxx.com");
          System.setProperty("http.proxyPort", "xxxx");
          Authenticator proxyAuthenticator = new HttpAuthenticateProxy(
                    "username", "password");
          Authenticator.setDefault(proxyAuthenticator);
          XmlRpcClient rpcClient = new XmlRpcClient();
          XmlRpcCommonsTransportFactory factory = new XmlRpcCommonsTransportFactory(
                    rpcClient);
          factory.setHttpClient(httpClient);
          rpcClient.setTransportFactory(factory);
        XmlRpcClientConfigImpl config = new XmlRpcClientConfigImpl();
        config.setServerURL(new URL(url));
        config.setEnabledForExtensions(true);
          config.setEnabledForExceptions(true);
          config.setBasicUserName("username");
          config.setBasicPassword("password");
          rpcClient.setConfig(config);
          Map<String, String> loginMap = new HashMap<String, String>();
          String bugzillaUserName = "username";
          String bugzillaPassword = "password";
          loginMap.put("login", bugzillaUserName);
          loginMap.put("password", bugzillaPassword);
          Object loginResult = rpcClient.execute("User.login",new Object[] { loginMap });
          System.out.println("loginResult.toString() "
                    + loginResult.toString());
    public static void main(String[] args) throws Exception {
        String url = "https://projects.maemo.org/bugzilla_sandbox/xmlrpc.cgi";
        Test1.install();
        Test1.call(url);
        System.out.println("Finished.");
}

Can i use wrt54g v8 to connect to internet via different router

hi i have just moved to a new house and have fios install but they put the router in the garage i have a extra wrt54g v8 router that i want to connect my directv reciever and xbox 360 wired to the wrt54g router and wirelessly connect to my other router wich is connected to the internet is this possible with this router

No, at least not with Linksys firmware. The WRT54G is designed to generate a wireless network, not to connect to an existing wireless network.
The job you described is done by a device called an "ethernet bridge" or "wireless bridge", such as the Linksys WET200 or the WET54G.
In some cases, third party firmware might be able to convert your WRT54G to a wireless bridge. If you are interested in this, check out "dd-wrt" and other third party firmware.

Problems using Tungsten E2 bluetooth connection with MacBook. Can anyone help me?

I have a Tungsten E2. I am trying to send photos, contacts, and other files from my Tungsten E2 to my MacBook but I keep getting the error "Serial Port is in use by another application". Can anyone tell me how to correct this?
Post relates to: Tungsten E2

Hello Matt
Thank you for your reply. I tried all that you suggested but nada! Nothing worked.
So I brought the Sony Camcorder back to the store (as it was brand new a couple of days old) and exchanged it for a Canon Legria HF R206 HD.
I can now easily upload the video and photos from this camcorder onto my MacBook and it all works fine that way.
But my MAIN PROBLEM is that iMovie in my iPad2 can't read the content of the camcorder using iMovie?
I'm wondering if it has something to do with the fact that I'm using a different version of iMovie on the MacBook vs the iPad 2. Everything works fine using version iMovie 09 ver. 8.0.5 (820) on the MacBook.
I'm using iMovie version 122 ( 2010-2011) on the Ipad2.
After going back to the store and dropping an extra 20 Euro as I was advised that this Camcorder does work well with all Apple products, I now find that it may be the version of iMovie that is preventing the upload to iPad2.
Can you shed any of your wisdom on this for me please?
Many thanks
Aryelle

Problem using PC Suite to connect to internet

Similar Messages

Maybe you are looking for