Problem using prompt in BO Explorer

I'm using BOBJ XI 3.1 Explorer and during the validation of a new Information Spaces, with prompts, this message appears:
The prompts module failed to initialize
Request timed out
My universe is already created without checks in Controls panel, so the problem is not related to query or row limits.
Can anybody help me?
thanks

Dear Roberto,
the problem you are facing may be because the object specified in your prompt (perhaps a LOV) takes longer than 1 minute to be retrieved hence Explorer will throw a times out error.
If you create the same query within a WebIntelligence report, how long does it take to display?
You can increase the timeout in the default settings (default is set to 60 seconds):
C:\Program Files\Business Objects\Tomcat55\webapps\polestar\WEB-INF\classes\default.settings.properties
request.timeout=60
Hope this info help.
Regards,
Samanta

Similar Messages

Any Problems using SSL with Safari and the move with Internet explorer to require only TLS encryption.

Any Problems using SSL with Safari and the move with Internet explorer to require only TLS encryption.

Hi .
Apple no longer supports Safari for Windows if that's what you are asking > Apple apparently kills Windows PC support in Safari 6.0
Microsoft has not written IE for Safari for many years.

How to use prompt with ppt

Hello,
Using obiee 11g,
I am trying use MS Office Powerpoint with BI.
So i downloaded the tool and then connected to BI Server login to MS office ppt.
After login i tried to drag one report.
When i did it told me "View cannot be inserted beacuse the result set may be empty".
So this problem was caused because i am using dashboards prompts in my dashboard.
How can i use dashboard prompts here in the ppt?
Thanks

Hello,
Actually I am not using Bi publisher at all.
What i did was.
I downloaded the oracle bi for MS office.
Then i installed.
Then opened a PPT.
Login to OracleBI inisde the PPT.
Dragged a report/answers from catalog.
But since there is a dependency on the prompts value there its sowing no results found.
So i just wanted to know how to use prompt value.
The link which u gave tells to use BI publisher parameter name and all.
I dont have much idea regarding BI publisher.
Thanks

Problem uploading prompts

Hello,
I've got a problem for prompts uploading on cue. Prompts are between 75 and 250 Kb.
When i try to upload prompts with cue web site it takes a long time and give me at the end a non-reachable error. When i try with smallest prompts (around 20 to 50 Kb) it works.
So i tried to upload manually with cue "ccn copy url ftp://xxx/xxx.wav prompt xxx.wav username user password pass" but it fails to connect to the ftp server with error (7) Couldn't connect to host. On ftp server (Filezilla), i can see first connection attempt on logs, ftp server try to send welcome message which failed because it does not have response from cue. I also tried with http "ccn copy url http://xxx/xxx.wav prompt xxx.wav" but the same problem seems to occur (Communication problem between cue and ftp or http server for sending response).
cue and ftp server are not on same ip address range and they use cme to communicate as a router or gateway.
I'm on cue Version 8.6.3
Does anyone could help me to resolve this issue.
Regards

I've also tried this command on a fine working uc520 in another network and I also get this issue. Despite the fact that on this uc520 web page is working well for uploading, this command resulting whith these messages :
From uc520 :
(7) couldn't connect to host
From Filezilla :
(000002)17/06/2013 09:46:55 - (not logged in) (x.x.x.x)> Connected, sending welcome message...
(000002)17/06/2013 09:46:55 - (not logged in) (x.x.x.x)> 220 FileZilla Server version 0.9.41 beta
(000002)17/06/2013 09:46:55 - (not logged in) (x.x.x.x)> could not send reply, disconnected.
Ping is working from filezilla server to cue and from cue to filezilla server, but is it something with routing or firewalling on uc500 ?
Should i try this command with same range ip adresses for ftp server and cue to get it working ?

NetStream publish audioloss problem using FMS 3.5

Hi All,
I am new to flex 3.2.0 and FMS 3.5. I have problem using netstream data publish (i.e.record) the audio from client to FMS server. I tried NetStreamInfo class in flash player 10. Alert will show zero value.
nsi = recordStream.info;
if (nsi){
Alert.show( nsi.audioLossRate.toString() );
how to avoid data loss over the network. Please help
Thanks
Arulkumar

Adding to my previous post this is the XML output i get when i try to access the fms admin console from local ip address i.e http://192.168.10.19:1111/fms_adminConsole.htm
<?xml version="1.0" encoding="utf-8" ?>
- <result>
<level>error</level>
<code>NetConnection.Connect.Rejected</code>
<description>Admin user requires valid username and password.</description>
<timestamp>2/3/2010 8:26:08 AM</timestamp>
</result>
but when i try to access fms admin console through public ip (http://212.77.xx.xx:1111/fms_adminConsole.htm) then it gives me the following :
Internet Explorer cannot display the webpage.
Any more suggestions Jay (because really ur the only one helping me out in this so far) ??

Compose Message problem using Verizon webmail

On my Windows 7 machine, using either Chrome or Explorer to access the Verizon webmail page, I unable to compose a message. The compose message window will not open after clicking GO. Yet when I use my Vista machine there is no problem. Any suggestions?

Might be prevented by a popup blocker.

Could not complete the command because of a problem using the Adobe Colour Engine??

When I am playing back a set of recorded actions, I receive a message that says "Could not complete the command because of a problem using the Adobe Colour Engine". This occurs after I copy a part of an image to paste it onto a new file. It occurs during the "Make" part(making a new file) and I was just wondering how to fix it.

It's a known (but esoteric) bug in Photoshop CS5 and earlier, seen with grayscale images. It used to crash utterly, but after I reported it I think they patched Photoshop 12.0.something to avoid the crash. However, the step still fails when you make a new grayscale image in an action.
I saw it because I created an action to paste the clipboard into new document, all in one motion. It virtually always works as long as I have a colored image in the clipboard. But not grayscale.
One workaround, which is not particularly convenient, is to turn on prompting for the Make new image step. I haven't used this workaround for a while, but it used to be that if you confirmed the "File New" operation manually it would continue and work. I don't know if the workaround is still valid.
-Noel

Could not initialize photoshop because of a problem using the adobe color engine (Win 7)

Was running the lastest version of Photoshop CS5 and added a second quad graphics card and 4 more monitors. Now PS will not start and I get the error message "could not initialize photoshop because of a problem using the adobe color engine."
Computer has 2 NIVDIA Quadro4 NVS420 graphics boards with 8 Samsung SyncMaster 1920x1080 monitors. If I disable 4 of the monitors CS5 starts normally. I do not have to remove the added graphics card. When I extend the desktop again to all 8 monitors I get the error above.
How do I trouble-shoot the problem? Is it Photoshop, NIVDIA or Windows 7?

Well, not exactly a full solution yet (at least for my setup), but I am certain now that this issue is (mostly) caused by nVidia's drivers. You may be able to fix your setup by simply installing the latest drivers for your NVS420 cards (266.45 for Win 7/64 rel. 01/12/2011).
Since you are using two identical cards, this could do the trick.
Caveats - Make sure you:
1. Select Custom Install, the Express Install will most likely not work properly.
2. Unselect the Audio Driver (if available), the nVidia HD(MI) Audio driver could
screw up your speech recognition (if you use it) or other audio software - it did for me.
3. Select Clean Install. If you don't, files like C:\Windows\System32\drivers\nvlddmkm.sys
and several other driver related files will not be overwritten, causing all sorts of neat effects.
4. After the Install is complete, reboot your system whether the Installer prompts you or not.
After testing various configurations, disabling two - six of my eight monitors I am at this point:
I am now using nVidia's lastest and greatest piece of crap (read driver), version 266.58, released just two days ago. After an initial snag with maximized windows extending to the bottom of the main monitor (underneath the taskbar), a re-install & reboot solved that issue.
All three driver versions tested (260.89, 260.99, 266.58) now allow me to start PhotoShop without any problems; providing I first disable the two monitors fed by my onboard graphics (nVidia 780a based), leaving me with six monitors connected to three GTS-450 cards. I can even re-enable the two other monitors once the program is open, and it continues to work fine. However, I must disconnect them again for the next start of PhotoShop.
On an interesting side note:
After disabling six monitors (leaving only two on a GTS-450), I was also able to open and run SoundBooth CS5, which previously would not open, citing the audio driver as the problem. After sucessfully starting SoundBooth I could re-enable all six other monitors (incl. onboards),
and that program now opens and works fine with all 8 monitors connected. [ODD !!!]
Other than Adobe Software, I've had only one other issue with my setup:
When playing online poker at PokerStars, occasionally and quite randomly one of multiple tables would freeze up. I'll try disabling the two onboard monitors for that program as well to see whether the random freezes stop.
Overall, while I think that Adobe produces fine software and nVidia has been in need of an overhaul for quite some time now, I also think that Adobe and nVidia software engineers need to work more closely together to ensure that problems like this don't arise in the first place after a product has been released to the public. IMHO, this is avoidable!
PS:
Here's a link to a great tool for multiple monitors, Display Fusion by Binary Fortress.
I use the free version, it allows you to do cool things like have individual wallpapers for all
your monitors, or stretch a single image across all monitors. With the Pro Version ($25),
you can also add individually customizable taskbars to each monitor, and a lot more.
http://www.displayfusion.com/

I have a problem using Pages. Whenever I type fl I get a symbol instead. Does anyone else have this problem?

I have a problem using Pages. Whenever I type fl I get a symbol instead. Does anyone else have this problem?

Hi Tom
On my machine it seems that the fi ligature doesn't exist with Times New Roman (installed version is 5.01.3x)
It's available in Warnock Pro but the st one which is designed in Warnock doesn't apply.
This last screenshot was made from Linotype Explore, the old free version.
Typography isn't really easy, even with modern tools
Yvan KOENIG (VALLAURIS, France) lundi 6 juin 2011 14:53:01
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

How can we use Prompt text from Field comment in database

After migrate database from 4 to 9, I'm getting the problem. The problem is Prompt text in Form don't appear. So, how can we get the Prompt text by using the comment of the field in database which it related with that database text. Thank you.

Hello,
The table name is indicated in the query data source name property of the block
Get_Block_Property( 'bloc_name', QUERY_DATA_SOURCE_NAME ) ;
The column name is indicated in the column name item property
Get_Item_Property( 'blk.item_name', COLUMN_NAME ) ;
Comment is stored in the user_col_comments view
Here is the code that retrieves coments for all based items of the current block:
Declare
LC$Table    Varchar2(30);
LC$Column   Varchar2(30);
LC$Item     Varchar2(61);
LC$Comment USER_COL_COMMENTS.COMMENTS%Type ;
Begin
LC$Table := Get_Block_Property( :system.current_block, QUERY_DATA_SOURCE_NAME ) ;
-- For each item of the block --
LC$Item := Get_Block_Property( :system.current_block, FIRST_ITEM ) ;
Loop
    LC$Column := Get_Item_Property( LC$Item, COLUMN_NAME ) ;
    If LC$Column is not null Then
         Begin
        Select
         COMMENTS
        Into
         LC$Comment
        From
         USER_COL_COMMENTS
        Where
         TABLE_NAME = LC$Table
        And
         COLUMN_NAME = LC$Column
        -- set the prompt --
        Set_Item_Property( LC$Item, PROMPT_TEXT, LC$Comment ) ;
         Exception
              When no_data_found Then
                 Null;
         End;
    End if ;
    LC$Item := Get_Item_Property( LC$Item, NEXTITEM ) ;
    Exit When LC$Item is null ;
End loop;
End;Francois

Problem using trinidad 2.0 and facelets

Hi everyone!!!
I am facing problem using Trinidad 2.0 components with facelets. I am using Tomcat 6.0 server , 1.6_20 jdk with jre6. I am using springsource tool suite as an IDE.
My problem is regarding usage of facelets with trinidad component library. I am trying to run *<tr:panelTabbed>* component of TRINIDAD 2.0 on *.jsp* as well as *.xhtml*. If I run my jsp , I am able to used panel tab fully like switching between two tabs. Same code I have added in my .xhtml page in the same project under *<ui:composition>* tags. I am successfully able show the component on the screen , but I am not able to switch between the two tabs. Here are the list of libs that have added to the project.
commons-beanutils-1.7.0.jar,commons-codec-1.3.jar,commons-collections-3.2.jar,commons-digester-1.8.jar,commons-discovery-0.4.jar,
commons-el.jar,commons-fileupload.jar,commons-logging-1.1.1.jar,jsf-facelets.jar,jstl.jar,myfaces-api-2.0.1.jar,myfaces-impl-2.0.1.jar,
trinidad-api-2.0.0-alpha-2.jar,trinidad-impl-2.0.0-alpha-2.jar
index.jsp
<%@taglib uri="http://myfaces.apache.org/trinidad" prefix="tr"%><html>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
<head>
<title>Your first JSF Application</title>
</head>
<body bgcolor="white">
<f:view>
     <tr:document>
          <h:form>
               <tr:panelTabbed position="above">
                    <tr:showDetailItem text="Account">
                         <tr:panelBox text="Account Information Details"
                              inlineStyle="width: 100%;">
                              <tr:panelList inlineStyle="width: 100px;">
                                   <tr:panelHorizontalLayout inlineStyle="height:100px;">
                                        <f:facet name="separator">
                                             <tr:spacer width="100" height="100" />
                                        </f:facet>
                                        <tr:outputText value="Account Number" styleClass="AFFieldText" />
                                        <tr:outputText value="Effective Date" styleClass="AFFieldText" />
                                        <tr:outputText value="Expiration Date" styleClass="AFFieldText" />
                                   </tr:panelHorizontalLayout>
                                   <tr:panelHorizontalLayout inlineStyle="height:100px;">
                                        <f:facet name="separator">
                                             <tr:spacer width="100" height="100" />
                                        </f:facet>
                                        <tr:outputText value="#{accDet.accountNumber}"
                                             styleClass="AFFieldText" />
                                        <tr:outputText value="#{accDet.effectiveDate}"
                                             styleClass="AFFieldText" />
                                        <tr:outputText value="#{accDet.expirationDate}"
                                             styleClass="AFFieldText" />
                                   </tr:panelHorizontalLayout>
                                   <tr:separator />
                                   <tr:panelHorizontalLayout inlineStyle="height:100px;">
                                        <f:facet name="separator">
                                             <tr:spacer width="100" height="1" />
                                        </f:facet>
                                        <tr:outputText value="Address" styleClass="AFFieldText" />
                                        <tr:outputText value="Fax" styleClass="AFFieldText" />
                                   </tr:panelHorizontalLayout>
                                   <tr:panelHorizontalLayout inlineStyle="height:100px;">
                                        <f:facet name="separator">
                                             <tr:spacer width="100" height="1" />
                                        </f:facet>
                                        <tr:outputText value="#{accDet.address}"
                                             styleClass="AFFieldText" />
                                        <tr:outputText value="#{accDet.fax}" styleClass="AFFieldText" />
                                   </tr:panelHorizontalLayout>
                              </tr:panelList>
                         </tr:panelBox>
                    </tr:showDetailItem>
                    <tr:showDetailItem text="Insured">
                         <tr:panelHeader text="Header 2">
                              <tr:panelFormLayout>
                                   <tr:inputText label="Text1" />
                                   <tr:inputText label="Text2" />
                                   <tr:inputText label="Text3" />
                              </tr:panelFormLayout>
                         </tr:panelHeader>
                    </tr:showDetailItem>
               </tr:panelTabbed>
          </h:form>
     </tr:document>
</f:view>
</body>
</html>
guess.xhtml
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml"
     xmlns:ui="http://java.sun.com/jsf/facelets"
     xmlns:h="http://java.sun.com/jsf/html"
     xmlns:tr="http://myfaces.apache.org/trinidad"
     xmlns:f="http://java.sun.com/jsf/core">
<body bgcolor="white">
<f:view>
     <tr:document>
<h:form>
     <tr:panelTabbed>
          <tr:showDetailItem text="Tab 1"></tr:showDetailItem>
          <tr:showDetailItem text="Tab 2"></tr:showDetailItem>
     </tr:panelTabbed>
</h:form>
</tr:document>
</f:view>
</body>
</html>
web.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
     xmlns="http://java.sun.com/xml/ns/javaee" xmlns:web="http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
     xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
     id="WebApp_ID" version="2.5">
     <display-name>Demo_ProtoType</display-name>
     <filter>
          <filter-name>trinidad</filter-name>
          <filter-class>org.apache.myfaces.trinidad.webapp.TrinidadFilter</filter-class>
     </filter>
     <filter-mapping>
          <filter-name>trinidad</filter-name>
          <servlet-name>faces</servlet-name>
     </filter-mapping>
     <context-param>
          <param-name>javax.faces.STATE_SAVING_METHOD</param-name>
          <param-value>client</param-value>
     </context-param>
     <listener>
          <listener-class>
               org.apache.myfaces.webapp.StartupServletContextListener</listener-class>
     </listener>
     <servlet>
          <servlet-name>Faces Servlet</servlet-name>
          <servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
          <load-on-startup>1</load-on-startup>
     </servlet>
     <servlet-mapping>
          <servlet-name>Faces Servlet</servlet-name>
          <url-pattern>*.xhtml</url-pattern>
     </servlet-mapping>
     <servlet>
          <servlet-name>resources</servlet-name>
          <servlet-class>org.apache.myfaces.trinidad.webapp.ResourceServlet</servlet-class>
     </servlet>
     <servlet-mapping>
          <servlet-name>resources</servlet-name>
          <url-pattern>/adf/*</url-pattern>
     </servlet-mapping>
     <context-param>
          <param-name>org.apache.myfaces.trinidad.ALTERNATE_VIEW_HANDLER</param-name>
          <param-value>org.apache.myfaces.trinidadinternal.facelets.TrinidadFaceletViewHandler</param-value>
     </context-param>
     <context-param>
          <param-name>org.apache.myfaces.trinidad.FACELETS_VIEW_MAPPINGS</param-name>
          <param-value>*.xhtml</param-value>
     </context-param>
</web-app>
faces-config.xml
<?xml version="1.0" encoding="UTF-8"?>
<faces-config xmlns="http://java.sun.com/xml/ns/javaee"
     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
     xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-facesconfig_1_2.xsd"
     version="1.2">
     <application>
          <default-render-kit-id>org.apache.myfaces.trinidad.core</default-render-kit-id>
     </application>
     <managed-bean>
          <managed-bean-name>accDet</managed-bean-name>
          <managed-bean-class>com.csc.Account.AccountDetail</managed-bean-class>
          <managed-bean-scope>session</managed-bean-scope>
     </managed-bean>
</faces-config>Following warning is coming on server start up
java.lang.ClassNotFoundException: org.apache.myfaces.trinidadinternal.facelets.TrinidadFaceletViewHandler
     at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1484)
PLEASE LET ME KNOW IF ANYONE NEED THE .WAR file .I can send it over mail. Please hrlp me out !!! I have literally tried everything.This is the only HOPE

Hi gimbal2 ,
thanks for your prompt response.
I deleted jsf-facelets.jar from the lib.
Also I removed      <context-param>
          <param-name>org.apache.myfaces.trinidad.ALTERNATE_VIEW_HANDLER</param-name>
          <param-value>org.apache.myfaces.trinidadinternal.facelets.TrinidadFaceletViewHandler</param-value>
     </context-param>
     <context-param>
          <param-name>org.apache.myfaces.trinidad.FACELETS_VIEW_MAPPINGS</param-name>
          <param-value>*.xhtml</param-value>
     </context-param>Now that error has gone .But I am still not able to switch between the tabs for .xhtml page but it is working fine for .jsp page.
For .xhtml page , on clicking on the tab, console is showing something like below
Aug 17, 2010 9:20:49 PM org.apache.myfaces.trinidad.component.UIXShowDetail broadcast
WARNING: Event org.apache.myfaces.trinidad.event.DisclosureEvent[phaseId=INVOKE_APPLICATION(5),component=CoreShowDetailItem[UINodeFacesBean, id=j_id957384125_39108532],expanded=true] was delivered to a showDetail already in that disclosure state.

Excel export problem using craxddrt

Hi,
I'm using craxddrt v.11.5 in our intranet application to export rpt.reports to different formats. My code works well with PDF and text exports, but when it comes to Excel after the .Export(false) method executes the browser window just goes into idle then the session finally expires. I never catch any error. I have tried several export options with no prevail.
I suspect the Excel export is missing some info to complete and it is trying to prompt me, but no visible prompt gets displayed/answered so it just expires.
Could anyone help me out. I've spent several days researching and fixing the code and ran out of ideas.
Sincerely
Steve Komaromi

Hi Steve, Is there some reason you are posting this question over and over again?
Try looking at your same post: Excel export problem using craxddrt
Also, RDC is legacy product. Look for you answer where you posted the exact same question in the legacy forum.

Problem for prompt playback after uploading - IPCCX 5.0 HA

Hi,
We have a IPCCX5.0 HA. I am using the prompt upload function of CRS script to upload the prompt recorded by user.
1.When IVR1 is master IVR2 slave user can upload and play back the prompt for prompt repository.
2.We reboot the server IVR1 so that
when IVR2 is master IVR1 slave user can still upload and play back the prompt for prompt repository.
3.Instead of 2, after 1.
We shutdown IVR1 server IVR2 is master. But now we upload the prompt we can see it in IVR2 server prompt repository, but can't find in c:\programfiles\wavvaid\prompt\en_us directory and can't play back either using "prompt function" from another script.
>> But when we now reboot IVR2 server with IVR1 still down, we can see the prompt in c:\programfiles\wavvaid\prompt\en_us as well as play the prompt.
Question: Is it a must we have two servers one as master other as slave(available) at all times for the prompt to play back.
Do we expect IPCCX to give these issues, if the master is shutdown(powered off) and slave take over as master role?
Can somebody suggest what is wrong. The customer expects all functionality to when when either server is up.
Thanks

Hi
You should always be able to play back and retrieve things from the respository when a server is down.
Take a look in System/Control Center, then click on 'Component Activation' to the right. Ensure that all the services are activated on both HA nodes..
If they are all activated, then take a look under System/Datastore Control Center, and click on each of the repositories to see whether you have any replication problems listed.
It sounds to me like the repository data store may not be activated or properly working on one node..
Aaron
Please rate helpful posts..

Create script from another script using PROMPT

Oracle 11
Instead of having to link to another database I want to create 2 scripts that are executed from a shell script and run them separately. Script1 run in Database1 would create Script 2 by using PROMPT to create the second script while grabbing a date from database1 to pass into database2. I almost have it but the problem is ... Script2 uses COPY FROM and I have to put a "-" at the end of each line which the PROMPT takes as a literal instead of as part of the output.
SCRIPT1:
set pagesize 0
set trimspool on
set linesize 2000
set echo off
set verify off
set feedback off
set sqlblanklines on
spool /home/michelle/sql_scripts/sl_dtc_copy2.sql
PROMPT whenever sqlerror exit sql.sqlcode rollback
PROMPT SET ARRAYSIZE 5000
PROMPT SET COPYCOMMIT 20
PROMPT set linesize 4000
PROMPT
PROMPT COPY FROM {username}/{pswd}@{DB2} TO {username}/{pswd}@{DB2}
PROMPT CREATE SL_DTC_TMP USING SELECT DISTINCT
PROMPT col1, col2, col3
PROMPT FROM dual
PROMPT WHERE veh_data_elements_cd = 'ODO_READ'
PROMPT and       dh.data_collected_timstm >=
select trunc(sysdate)-7 from dual;
PROMPT and       substr(vdh.vin,10,1) in ('A','B','C','D')
PROMPT /
PROMPT spool off
PROMPT exit
spool off
exitSCRIPT2 NOW:
whenever sqlerror exit sql.sqlcode rollback
SET ARRAYSIZE 5000
SET COPYCOMMIT 20
set linesize 4000
COPY FROM {username}/{pswd}@{DB2} TO {username}/{pswd}@{DB2}
CREATE SL_DTC_TMP USING SELECT DISTINCT
col1, col2, col3
FROM dual
WHERE veh_data_elements_cd = 'ODO_READ'
and       dh.data_collected_timstm >=
12-AUG-11
and       substr(vdh.vin,10,1) in ('A','B','C','D')
spool off
exitSCRIPT2 HOW IT NEEDS TO BE:
--- A [SPACE] AND A [-] at the end of each line
--- THE DATE NEEDS TO HAVE SINGLE QUOTES AND PREFERABLY AT THE END OF THE PREVIOUS LINE
whenever sqlerror exit sql.sqlcode rollback
SET ARRAYSIZE 5000
SET COPYCOMMIT 20
set linesize 4000
COPY FROM {username}/{pswd}@{DB2} TO {username}/{pswd}@{DB2} -
CREATE SL_DTC_TMP USING SELECT DISTINCT -
col1, col2, col3 -
FROM dual -
WHERE veh_data_elements_cd = 'ODO_READ' -
and       dh.data_collected_timstm >= '12-AUG-11' -
and       substr(vdh.vin,10,1) in ('A','B','C','D')
spool off
exitTHANK YOU

Try
select 'whenever sqlerror exit sql.sqlcode rollback'                    ||chr(10)||
       'SET ARRAYSIZE 5000'                                             ||chr(10)||
       'SET COPYCOMMIT 20'                                              ||chr(10)||
       'set linesize 4000'                                              ||chr(10)||
       ' '                                                              ||chr(10)||
       'COPY FROM {username}/{pswd}@{DB2} TO {username}/{pswd}@{DB2} -'||chr(10)||
       'CREATE SL_DTC_TMP USING SELECT DISTINCT -'                      ||chr(10)||
       'col1, col2, col3 -'                                             ||chr(10)||
       'FROM dual -'                                                    ||chr(10)||
       'WHERE veh_data_elements_cd = ''ODO_READ'' -'                    ||chr(10)||
       'and       dh.data_collected_timstm >= ''12-AUG-11'' -'          ||chr(10)||
       'and       substr(vdh.vin,10,1) in (''A'',''B'',''C'',''D'')'
       as Script
from dual

Problems using FP Advise Timestamp

I'm having problems using the timestamp from the FP Advise vi - dates/times way out from current date/time. I am using FP1600 and have FW 3.00.
I've seen some comments re time sync of the FP Server but not sure what this relates to.
Any help would be appreciated.
Thanks,
Niel.

Niel,
Sorry for the confusion. The Time Service that the FP-1600 uses is the Lookout Time Synchronization Services. The Lookout Time Syncrhonization services debuted with Lookout 4.0 and shortly thereafter in FieldPoint Explorer 2.0. They are also distributed with later versions of those two products and now with LabVIEW-Data Logging and Supervisory Control module. The set-up of the Time Server is as simple as installing any of the above products. The Time Synchronization Server is installed as a Service and should always be available to any computer or device that is trying to synchronize to it.
A Time Server is a computer that is running the Lookout Time Synchronization Service as installed by any of the above mentioned products. The primary m
ethod of configuring a FP-1600 to use the Time Server is the Time Server IP Address assignment box which is located in the window where all of the FP-1600's ethernet parameters is located. It is strongly recommended that the Time Server be assigned a static IP address as the FP-1600 modules do not support DHCP. If you assign a FP-1600 to look at a particular IP address as it's Time Server, and due to DHCP it's changed it's address, then the FP-1600 is unable to synchronize it's clock. An important note is that even when a FP-1600 fails to synchronize it's clock, the delta's on the time-stamps will still be accurate even though the absolute date/time is incorrect.
Regards,
Aaron

Problem using prompt in BO Explorer

Similar Messages

Maybe you are looking for