Problem using saxparser(reading japanese xml file)
Hi everybody,
I hav a problem while reading japanese xml file.(UTF-8 charset)
I have to read the file and process it.
But in the characters function of the saxparser(defaulthandler) the japanese chatracters are not read properly and the program is
displaying some junk values(????) instead of the actual japanese characters.
I am also usind xsd validation.
I am not able to where the characters manipulation is being done.
Please help me as soon as possible .
Thanks in advance,
Charan.
There are a couple of things probably going on.
1) When I've done things using Unicode unusual characters, they do not print properly if you do System.out.println( ). If you have a Gui panel and can put them into a JTextArea or JEditorPane, they may show up properly if you have set the font for that object to one that can display the characters.
2) Many people starting with SAX write their code assuming that the characters method is only called once for each element that has text content. This is incorrect. The characters method can be called many times, and it is your responsibility to catch all of the data. In 1.4 you can use a StringBuffer, or in 1.5 there is a StringBuilder. You use these to accumulate the data from all of the calls to charactrers() between the startElement and endElement.
Each parser can decide how often it calls characters, so you have to be able to process data from several calls.
Dave Patterson
Similar Messages
-
Parse problem using SOMSchema reading an .xsd file
Platform: windowsXP, WLI2.1, WLS6.1sp1
The following is extracted from a log of the sample WLI server.
I used it as a platform for an adapter under development.
The log shows an erronous SOMSchema after a failed creation of an application
view.
The cause is long before. During a parse of a schema.xsd from a file into a SOMSchema
it loses a '/'.
<xsd:element name="Value">
<xsd:complexType>
<xsd:complexContent>
<xsd:extension base="xsd:complexType">
<xsd:attribute name="col" use="required"/>
<xsd:attribute name="row" use="required"/>
</xsd:extension>
--> <xsd:complexContent/>
</xsd:complexType>
</xsd:element>
Of course I worked around by dropping the tag </xsd:complexContent/>. Without
all parses allright.
From the erronous SOMSchema you can derive valid DocumentRecords.
For that reason I guess the problem is to be found in the schema package.
Platform: windowsXP, WLI2.1, WLS6.1sp1
The following is extracted from a log of the sample WLI server.
I used it as a platform for an adapter under development.
The log shows an erronous SOMSchema after a failed creation of an application
view.
The cause is long before. During a parse of a schema.xsd from a file into a SOMSchema
it loses a '/'.
<xsd:element name="Value">
<xsd:complexType>
<xsd:complexContent>
<xsd:extension base="xsd:complexType">
<xsd:attribute name="col" use="required"/>
<xsd:attribute name="row" use="required"/>
</xsd:extension>
--> <xsd:complexContent/>
</xsd:complexType>
</xsd:element>
Of course I worked around by dropping the tag </xsd:complexContent/>. Without
all parses allright.
From the erronous SOMSchema you can derive valid DocumentRecords.
For that reason I guess the problem is to be found in the schema package.
-
Read an XML file and send it to client
Hi,
I'm introducing to servlet development and I'm trying to do some AJAX calls. The client side is implemented, but I have some troubles on the server side. I want to open an XML file and send it to the client. How can I do that? Any special header?
I have implemented this test in PHP, so you can imagine what I would like to do:
if ($type == "xml"){
$xml = "";
$file = fopen ("file.xml", "r");
while (!feof ($file)){
$xml .= fgets ($file, 4096);
fclose ($file);
header ("Content-type: text/xml; charset=ISO-8859-1");
echo $xml;
}The XML file is:
<?xml version='1.0' encoding='ISO-8859-1'?>
<users>
<user>
<name>Pepe</name>
<age>18</age>
</user>
<user>
<name>María</name>
<age>21</age>
</user>
</users>Thanks.Not very useful:(.
This is my code:
PrintWriter out = null;
try{
String type = request.getParameter ("type");
if (type.equals ("xml")){
response.setContentType ("text/xml; charset=ISO-8859-1");
out = response.getWriter ();
String xml =
"<?xml version='1.0' encoding='ISO-8859-1'?>" +
"<users>" +
"<user>" +
"<name>Pepe</name>" +
"<age>18</age>" +
"</user>" +
"<user>" +
"<name>María</name>" +
"<age>21</age>" +
"</user>" +
"</users>";
out.println (xml);
}finally{
out.close ();
}This code works. The servlet send back the xml and the client shows the content but, as you can see, i'm not reading the xml file. So my problem is on reading the xml file as a plain text. My code is this:
response.setContentType ("text/xml; charset=ISO-8859-1");
out = response.getWriter ();
String xml = "";
FileReader fr = null;
BufferedReader br = null;
try{
fr = new FileReader (new File ("file.xml"));
br = new BufferedReader (fr);
String linea;
while ((linea = br.readLine ()) != null){
xml += linea;
//System.out.println (linea);
fr.close ();
}catch (Exception e){
e.printStackTrace ();
}But now I get an Exception File not found. The xml file is in the web directory (I'm using net beans 6.8). Where I have to put the file?
Thanks.
Edited by: GagleKas on Mar 15, 2010 6:39 AM -
I need for a simple example of reading a xml file using jdom
Hello
I have been looking for a simple example that uses Jdom to read am xml file and use the information for anything( ), and I just can't find one.since I'm just beggining to understand how things work, I need a good example.thanks
here is just a simple cod for example:
<xmlMy>
<table>
<item name="first" value="123" createdDate="1/1/90"/>
<item name="second" value="456" createdDate="1/4/96"/>
</table>
<server>
<property name="port" value="12345"/>
<property name="maxClients" value="3"/>
</server>
</xmlMy>DaveHi,
FileInputStream fileInputStream = null;
try {
fileInputStream = new FileInputStream("my_xml_file.xml");
} catch (FileNotFoundException e) {
e.printStackTrace();
} finally{
if (fileInputStream == null) return;
SAXBuilder saxBuilder = new SAXBuilder();
saxBuilder.setEntityResolver(new EntityResolver() {
public InputSource resolveEntity(String publicId, String systemId) throws SAXException, IOException {
return new InputSource(new StringReader(""));
Document document = null;
try {
document = saxBuilder.build(fileInputStream);
} catch (JDOMException e) {
e.printStackTrace();
} catch (IOException e) {
e.printStackTrace();
} finally {
if (document == null) return;
Element element = document.getRootElement();
System.out.println(element.getName());
System.out.println(element.getChild("table").getName()); -
Reading my Xml file in Unity using C#
Hi, i have to read a xml file like this:
<UIs>
<UI>
<Titolo>
<Ita>
Mitocondri
</Ita>
<English>
Mitochondrion
</English>
</Titolo>
<Corpo>
<Ita>
I mitocondri sono gli organelli che producono ATP all'interno della cellula,aggiungine di nuovi per aumentare la produzione di ATP
</Ita>
<English>
Mitochondrion
</English>
</Corpo>
<Price>
120
</Price>
<MaxNumber>
1
</MaxNumber>
</UI>
<UIs>
How can i make a simple xml reader in c# to read this structure?
Thanks!Try this. The code writes your sample XML and then reads it back
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Data;
using System.Xml;
using System.Xml.Serialization;
using System.Xml.Schema;
using System.IO;
namespace ConsoleApplication1
class Program
const string FILENAME = @"c:\temp\Test.xml";
static void Main(string[] args)
UIs uIs = new UIs()
uI = new UI()
titolo = new Titolo()
Ita = "Mitocondri",
english = "Mitochondrion"
corpo = new Corpo()
ita = "I mitocondri sono gli organelli che producono ATP all'interno della cellula,aggiungine di nuovi per aumentare la produzione di ATP",
english = "Mitochondrion"
price = 120,
maxNumber = 1
XmlSerializer serializer = new XmlSerializer(typeof(UIs));
StreamWriter writer = new StreamWriter(FILENAME);
XmlSerializerNamespaces _ns = new XmlSerializerNamespaces();
_ns.Add("", "");
serializer.Serialize(writer, uIs, _ns);
writer.Flush();
writer.Close();
writer.Dispose();
XmlSerializer xs = new XmlSerializer(typeof(UIs));
XmlTextReader reader = new XmlTextReader(FILENAME);
UIs newUIs = (UIs)xs.Deserialize(reader);
[XmlRoot("UIs")]
public class UIs
[XmlElement("UI")]
public UI uI { get; set; }
[Serializable, XmlRoot("UI")]
public class UI
[XmlElement("Titolo")]
public Titolo titolo { get; set; }
[XmlElement("Corpo")]
public Corpo corpo { get; set; }
[XmlElement("Price")]
public int price { get; set; }
[XmlElement("MaxNumber")]
public int maxNumber { get; set; }
[Serializable, XmlRoot("Titolo")]
public class Titolo
[XmlElement("Ita")]
public string Ita { get; set; }
[XmlElement("English")]
public string english { get; set; }
[Serializable, XmlRoot("Corpo")]
public class Corpo
[XmlElement("Ita")]
public string ita { get; set; }
[XmlElement("English")]
public string english { get; set; }
jdweng -
Reading an xml file in actionscript using flex3
plzz tell me how to read an xml file in actionscript using flex3.......
One possible option to parse an xml-file to a flex XML object:
public function parseConXML(source:String):void
xmlLoader = new URLLoader();
xmlLoader.load(new URLRequest(source));
// Eventlistener: if URL loaded --> onLoadComplete function
xmlLoader.addEventListener(Event.COMPLETE, xmlLoadComplete);
public function xmlLoadComplete(evt:Event):void{
var xml:XML = new XML();
// ignore comments in XML-File
XML.ignoreComments = true;
//ignore whitespaces in XML-File
XML.ignoreWhitespace = true;
// XML-Objekt erstellen
xml = new XML(evt.target.data);
//AFTERWARDS use your xml as your wish -
Reading from XML file using DOM parser.
Hi,
I have written the following java code to read the XML file and print the values. It reads the XML file. It gets the node NAME and prints it. But it returns null when trying to get the node VALUE. I am unable to figure out why.
Can anyone please help me with this.
Thanks and Regards,
Shweta
import java.io.*;
import java.net.*;
import java.util.*;
import oracle.xml.parser.v2.*;
import org.w3c.dom.*;
import org.xml.sax.SAXException;
public class ReadNodes
private static XMLDocument mDoc;
public ReadNodes () {
try {
DOMParser lParser = new DOMParser();
URL lUrl = createURL("mot.xml");
System.out.println("after creating the URL object ");
lParser.setErrorStream(System.out);
lParser.showWarnings(true);
lParser.parse(lUrl);
mDoc = lParser.getDocument();
System.out.println("after creating the URL object "+mDoc);
lParser.reset();
} catch (Exception e) {
e.printStackTrace();
} // end catch block
} // End of constructor
public void read() throws DOMException {
try {
NodeList lTrans = this.mDoc.getElementsByTagName("TRANSLATION");
for(int i=0;i<lTrans.getLength();i++) {
NodeList lTrans1 = lTrans.item(i).getChildNodes();
System.out.println("lTrans1.item(0).getNodeName : " + lTrans1.item(0).getNodeName());
System.out.println("lTrans1.item(0).getNodeValue : " + lTrans1.item(0).getNodeValue());
System.out.println("lTrans1.item(1).getNodeName : " + lTrans1.item(1).getNodeName());
System.out.println("lTrans1.item(1).getNodeValue : " + lTrans1.item(1).getNodeValue());
} catch (Exception e) {
System.out.println("Exception "+e);
e.printStackTrace();
} catch (Throwable t) {
System.out.println("Exception "+t);
public static URL createURL(String pFileName) throws MalformedURLException {
URL url = null;
try {
url = new URL(pFileName);
} catch (MalformedURLException ex) {
File f = new File(pFileName);
String path = f.getAbsolutePath();
String fs = System.getProperty("file.separator");
System.out.println(" path of file : "+path +"separator " +fs);
if (fs.length() == 1) {
char sep = fs.charAt(0);
if (sep != '/')
path = path.replace(sep, '/');
if (path.charAt(0) != '/')
path = '/' + path;
path = "file://" + path;
System.out.println("path is : "+path);
// Try again, if this throws an exception we just raise it up
url = new URL(path);
} // End catch block
return url;
} // end method create URL
public static void main (String args[]) {
ReadNodes mXML = new ReadNodes();
mXML.read();
The XML file that I am using is
<?xml version = "1.0"?>
<DOCUMENT>
<LANGUAGE_TRANS>
<TRANSLATION>
<CODE>3</CODE>
<VALUE>Please select a number</VALUE>
</TRANSLATION>
<TRANSLATION>
<CODE>5</CODE>
<VALUE>Patni</VALUE>
</TRANSLATION>
<TRANSLATION>
<CODE>6</CODE>
<VALUE>Status Messages</VALUE>
</TRANSLATION>
<TRANSLATION>
<CODE>7</CODE>
<VALUE>Progress</VALUE>
</TRANSLATION>
<TRANSLATION>
<CODE>8</CODE>
<VALUE>Create Data Files...</VALUE>
</TRANSLATION>
<TRANSLATION>
<CODE>9</CODE>
<VALUE>OK</VALUE>
</TRANSLATION>
</LANGUAGE_TRANS>
</DOCUMENT>because what you want is not the node value of CODE but the node value of the text nodes into it!
assuming only one text node into it, try this:
System.out.println("lTrans1.item(0).getNodeName : " + lTrans1.item(0).getFirstChild().getNodeValue()); -
Exception thrown while reading an XML file using Properties
Exception thrown while reading an XML file using Properties.
Exception in thread "main" java.util.InvalidPropertiesFormatException: org.xml.sax.SAXParseException:
The processing instruction target matching "[xX][mM][lL]" is not allowed.
at java.util.XMLUtils.load(Unknown Source)
<?xml version="1.0"?>
<Config>
<Database>
<Product>FX.O</Product>
<URL>jdbc:oracle:thin:@0.0.0.0:ABC</URL>
</Database>
</Config>Am I missing anything?Thanks a lot for all yr help.I have got the basics of
the DTD
However,when I say thus
<!DOCTYPE Config SYSTEM "c:/PartyConfig">
?xml version="1.0"?>
<Config>
<Database>
<Product>FX</Product>
<URL>jdbc:oracle:thin:@0.0.0.0:ABC</URL>
</Database>
</Config>I get the error
Invalid system identifier: file:///c:/ParyConfig.dtd
Please advise?for goodness sake, how many times do I have to tell you that you can't just expect the Properties class to accept arbitrary XML in any format? it reads XML in the format I linked to, and nothing else. Properties is not a general purpose XML binding. you can't do what you're trying to do with it. read this and in particular pay attention to the following
The XML document must have the following DOCTYPE declaration:
<!DOCTYPE properties SYSTEM "http://java.sun.com/dtd/properties.dtd">
Furthermore, the document must satisfy the properties DTD described above.
you are not reading my answers properly, are you? kindly do so -
Where can I find an example of a vi which reads a xml file using the Labview schema (LVXMLSchema.xsd)?
�Unflatten From XML� is of little use in parsing because it requires the data type. So it seems that the user has to parse each data value, and then �Unflatten From XML� can help a little.
I would like to see NI provide a VI for parsing it�s own schema.LabVIEW's XML functions are another way of saving data from controls and indicators that is in a more standardized format. If you look at the Unflatten From XML shipping example, it shows taking the data that you would normally send to a Digital Wveform Graph and converting it to XML instead. This data is then unflattend from XML and wired to the graph. Since you know what you wrote to the file, this is an easy thing to do. If what you are looking for is a way to look at any data in any LabVIEW XML file, then you are right, there is not a VI for that. However, I do not believe that that was the intention of the XML functions in the first place.
By wiriting data in XML, this allows other applications outside of LabVIEW to parse and recognize the dat
a. In LabVIEW, you would already know the types and can place a generic item of that type. The issue of knowing the type is that you need to know the type of the wire that comes out of the Unflatten function so that the VI will compile correctly. You could always choose a variant value to unflatten and then do some parsing to take the variant a part. Maybe this will help you out.
See this example for using the Microsoft parser for XML. (http://venus.ni.com/stage/we/niepd_web_display.DISPLAY_EPD4?p_guid=B123AE0CB9FE111EE034080020E74861&p_node=DZ52050&p_submitted=N&p_rank=&p_answer=)
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask -
How to read an xml file in OSB using file protocol where reading file path is dynamic.
HI,
We have to read a xml file from a location and write into Db.
Here reading file location is dynamic .
Please suggestHi
With open dataset you can open any file on the application server. So it should be working, but maybe you are looking for:
CALL TRANSFORMATION my_transformation
SOURCE XML xml_string
RESULT ROOT1 = field1
ROOT2 = field2.
Best regards,
Guido Koopmann -
Reading an xml file from a jar file
Short question:
Is it possible to read an xml file from a jar file when the dtd is
placed inside the jar file? I am using jdom (SAXBuilder) and the default
sax parser which comes with it.
Long Question:
I am trying to create an enterprise archive file on Weblogic 6.1. We
have a framework that is similar to the struts framework which uses it's
own configuration files
I could place the dtd files outside the jar ear file and specify the
absolute path in an environment variable in web.xml which is
configurable through the admin console.
But I want to avoid this step and specify a relative path within the jar
file.
I have tried to use a class which implements the entityresolver as well
as try to extend the saxparser and set the entity resolver within this
class explicitly, but I always seem to sun into problems like:
The setEntityresolver method does not get called or there is a
classloader problem. i.e. JDOM complains that it cannot load My custom
parser which is part of the application
VijayPlease contact the main BEA Support team [email protected]
They will need to check with product support to determine
the interoperatablity of Weblogic Server with these other
products. -
Hi Gurus,
I am dier need of one of the xml issue which I am facing right now.
I am reading one of the xml file which is like this
<?xml version="1.0" encoding="UTF-8" ?>
- <GEBIZ_ORDER xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
- <HEADER>
<MINISTRY_CODE>RPO</MINISTRY_CODE>
<DEPARTMENT_CODE>000</DEPARTMENT_CODE>
<ORDER_CODE>RPO000EPO11000953</ORDER_CODE>
<EXTERNAL_SYSTEM_CODE>E</EXTERNAL_SYSTEM_CODE>
<AMENDMENT_NUMBER>0</AMENDMENT_NUMBER>
<VARIATION_NUMBER>0</VARIATION_NUMBER>
<DESCRIPTION>Purchase Order for Air tickets for SOT to Korea (from 17th - 26th Sep 2011) off PC(RPO000ECN11000100)for SAS</DESCRIPTION>
<STATUS>NEW</STATUS>
<STATUS_DATE>2011-07-08T16:57:39</STATUS_DATE>
<PAYMENT_TERMS xsi:nil="true" />
<BILL_TO>One-Stop Centre, 9 Woodlands Avenue 9, S(738964)</BILL_TO>
<JUSTIFICATION>Please refer to attached approval email.</JUSTIFICATION>
<CREATE_TIMESTAMP>2011-07-08T16:57:39</CREATE_TIMESTAMP>
<TERMINATE_REASON xsi:nil="true" />
<TERMINATE_TIMESTAMP xsi:nil="true" />
<ORDER_TYPE>1</ORDER_TYPE>
- <FINANCIAL_SYSTEM>
<SUB_BUSINESS_UNIT>RPS01</SUB_BUSINESS_UNIT>
</FINANCIAL_SYSTEM>
- <SUPPLIER>
<CODE>200003048E</CODE>
<NAME>Safe2Travel Pte Ltd</NAME>
<GST_NUMBER>20-0003048-E</GST_NUMBER>
<CONTACT_NAME>ONG PEI LENG</CONTACT_NAME>
<CONTACT_PHONE>68233103</CONTACT_PHONE>
<CONTACT_EMAIL>[email protected]</CONTACT_EMAIL>
<CONTACT_FAX>68221636</CONTACT_FAX>
- <SITES>
- <SITE>
<ID>1</ID>
<NAME>ravel Pte Ltd</NAME>
<PHONE>68233013</PHONE>
<PHONE_EXTENSION xsi:nil="true" />
<FAX>68221636</FAX>
<EMAIL>[email protected]</EMAIL>
<ADDRESS_LINE1>10 Eunos Road 8</ADDRESS_LINE1>
<ADDRESS_LINE2>#08-03 (North Lobby)</ADDRESS_LINE2>
<ADDRESS_LINE3>Singapore Post Centre</ADDRESS_LINE3>
<COUNTRY_CODE>SG</COUNTRY_CODE>
<PROVINCE xsi:nil="true" />
<STATE xsi:nil="true" />
<CITY xsi:nil="true" />
<AREA_CODE xsi:nil="true" />
<ZIP>408600</ZIP>
<REGION_CODE xsi:nil="true" />
</SITE>
- <SITE>
<ID>2</ID>
<NAME>ravel Pte Ltd</NAME>
<PHONE>62208866</PHONE>
<PHONE_EXTENSION xsi:nil="true" />
<FAX>62265578</FAX>
<EMAIL>[email protected]</EMAIL>
<ADDRESS_LINE1>3 Lim Teck Kim Road</ADDRESS_LINE1>
<ADDRESS_LINE2>#02-02</ADDRESS_LINE2>
<ADDRESS_LINE3>Singapore Technologies Building</ADDRESS_LINE3>
<COUNTRY_CODE>SG</COUNTRY_CODE>
<PROVINCE xsi:nil="true" />
<STATE xsi:nil="true" />
<CITY xsi:nil="true" />
<AREA_CODE xsi:nil="true" />
<ZIP>088934</ZIP>
<REGION_CODE xsi:nil="true" />
</SITE>
- <SITE>
<ID>3</ID>
<NAME>Safe2Travel Pte Ltd</NAME>
<PHONE>62208866</PHONE>
<PHONE_EXTENSION xsi:nil="true" />
<FAX>62265578</FAX>
<EMAIL>[email protected]</EMAIL>
<ADDRESS_LINE1>3 Lim Teck Kim Road</ADDRESS_LINE1>
<ADDRESS_LINE2>#02-02</ADDRESS_LINE2>
<ADDRESS_LINE3>Singapore Technologies Building</ADDRESS_LINE3>
<COUNTRY_CODE>SG</COUNTRY_CODE>
<PROVINCE xsi:nil="true" />
<STATE xsi:nil="true" />
<CITY xsi:nil="true" />
<AREA_CODE xsi:nil="true" />
<ZIP>088934</ZIP>
<REGION_CODE xsi:nil="true" />
</SITE>
</SITES>
</SUPPLIER>
- <USER>
<CODE>JOYCE SOON</CODE>
<NAME>JOYCE SOON</NAME>
<ORGANISATION_NAME>Republic Polytechnic</ORGANISATION_NAME>
</USER>
- <FUND_COMMIT_AMOUNT>
<CURRENCY_CODE>SGD</CURRENCY_CODE>
<CURRENCY_RATE>1</CURRENCY_RATE>
<CURRENCY_RATE_DATE>1900-01-01T00:00:00</CURRENCY_RATE_DATE>
<CURRENCY_RATE_TYPE>BOOK</CURRENCY_RATE_TYPE>
<CURRENCY_AMOUNT>21551.4</CURRENCY_AMOUNT>
</FUND_COMMIT_AMOUNT>
- <PERIOD_CONTRACT>
<CODE>RPO000ECN11000100</CODE>
<AGENCY_CODE>RPO000</AGENCY_CODE>
<ADMIN_FEE_SGD_AMOUNT>0</ADMIN_FEE_SGD_AMOUNT>
</PERIOD_CONTRACT>
- <BUYER>
<ORGANISATION_CODE>1</ORGANISATION_CODE>
<ORGANISATION_NAME>Republic Polytechnic</ORGANISATION_NAME>
<NAME>Sally Ang</NAME>
<PHONE>31001711</PHONE>
<FAX>64151310</FAX>
<EMAIL>[email protected]</EMAIL>
</BUYER>
<APPROVING_OFFICERS />
</HEADER>
- <ITEMS>
- <ITEM>
<LINE_NUMBER>1</LINE_NUMBER>
<STATUS>NEW</STATUS>
<STATUS_DATE>2011-07-08T16:57:39</STATUS_DATE>
<DESCRIPTION>Return Air Ticket including Airport Taxes and Fuel Surcharges (2 staff and 24 students)</DESCRIPTION>
<UNIT_OF_MEASURE>PAX</UNIT_OF_MEASURE>
<QUANTITY>26</QUANTITY>
<LINE_TYPE>SERVICES</LINE_TYPE>
<UNIT_PRICE>828.9</UNIT_PRICE>
<PRICE_UNIT>1</PRICE_UNIT>
<TOTAL_AMOUNT>21551.4</TOTAL_AMOUNT>
<MATERIAL_MASTER_CODE xsi:nil="true" />
<MATERIAL_GROUP_CODE xsi:nil="true" />
<PLANT_CODE xsi:nil="true" />
<ITEM_CATEGORY_CODE xsi:nil="true" />
<ADMIN_FEE_SGD_AMOUNT>0</ADMIN_FEE_SGD_AMOUNT>
<INSTRUCTION_TO_SUPPLIER>Purchase of goods/services is subject to the Terms & Conditions found in www.rp.sg/purchase and/or in the ITQ/ITT Specifications. Please liaise with the Contact Person for delivery details. Invoice MUST be addressed to the Contact Person. PO number MUST be included in the Description field under e-Invoice Details section at Vendor@Gov.</INSTRUCTION_TO_SUPPLIER>
<PERIOD_CONTRACT_LINE_NUMBER>1</PERIOD_CONTRACT_LINE_NUMBER>
<GOODS_INSPECT_FLAG>N</GOODS_INSPECT_FLAG>
- <PURCHASE_REQUEST>
<CODE>RPO000EPR11000465</CODE>
<LINE_NUMBER>1</LINE_NUMBER>
</PURCHASE_REQUEST>
- <PART_NUMBER_INFORMATION>
<NATO_STOCK_NUMBER xsi:nil="true" />
<MANUFACTURER_PART_NUMBER xsi:nil="true" />
<PART_NUMBER xsi:nil="true" />
<CAGE_CODE xsi:nil="true" />
<CAGE_NAME xsi:nil="true" />
<ITEM_CONDITION xsi:nil="true" />
<MINIMUM_SHELF_LIFE xsi:nil="true" />
<SHELF_LIFE_REMAINING xsi:nil="true" />
<CERTIFICATE_OF_CONFORMANCE xsi:nil="true" />
<EXPORT_LICENSE xsi:nil="true" />
</PART_NUMBER_INFORMATION>
- <LOCATIONS>
- <LOCATION>
<LINE_NUMBER>1</LINE_NUMBER>
<STATUS>NEW</STATUS>
<STATUS_DATE>2011-07-08T16:57:39</STATUS_DATE>
<QUANTITY>26</QUANTITY>
<DELIVERY_DESTINATION>Republic Polytechnic, One-Stop Centre, 9 Woodlands Avenue 9, S(738964)</DELIVERY_DESTINATION>
<DELIVERY_DATE>2011-07-11T00:00:00</DELIVERY_DATE>
<DELIVERY_TERMS>LOC</DELIVERY_TERMS>
<PORT_OF_ORIGIN>-</PORT_OF_ORIGIN>
- <RECIPIENT>
<CODE>OSC</CODE>
<NAME>One Stop Centre</NAME>
<PHONE>65103000</PHONE>
<EMAIL>[email protected]</EMAIL>
</RECIPIENT>
- <DISTRIBUTIONS>
- <DISTRIBUTION>
<LINE_NUMBER>1</LINE_NUMBER>
<STATUS>NEW</STATUS>
<STATUS_DATE>2011-07-08T16:57:39</STATUS_DATE>
<QUANTITY>26</QUANTITY>
<CHART_OF_ACCOUNT>1/G01/3SAS/020/220908/0000/0000/0000</CHART_OF_ACCOUNT>
<PROJECT_DISTRIBUTION xsi:nil="true" />
</DISTRIBUTION>
</DISTRIBUTIONS>
</LOCATION>
</LOCATIONS>
</ITEM>
</ITEMS>
</GEBIZ_ORDER>I was able to read this kind of file structure but due to some constraints now they added supplier sites and increment that one which will be like variable kind of thing now.
And below mentioned is the script which I am using right now for reading that xml file
PROCEDURE XGBZPROD.XGBZ_PUR_ORD_XMLTAG_PROC(P_XML_FILE IN VARCHAR2, P_FOLDER_NAME IN VARCHAR2)
IS
lv_supp_file XMLTYPE;
lv_hdr_error VARCHAR2(240);
lv_line_error VARCHAR2(240);
lv_line_loc_err VARCHAR2(240);
lv_dist_err VARCHAR2(240);
l_file_name VARCHAR2(300);
l_folder_name VARCHAR2(300);
lv_sysdate DATE := sysdate;
BEGIN
l_file_name := p_xml_file;
l_folder_name := p_folder_name;
-- this clause to check whether is xml file or NODATA FILE.
IF upper(substr(l_file_name,instr(l_file_name,'.',1)+1,3)) ='XML' THEN
lv_supp_file := xmltype( bfilename('XMLDIR',P_XML_FILE), nls_charset_id('AL32UTF8'));
dbms_output.put_line('P_XML_FILE '||P_XML_FILE);
-- Initially insert data into 11g table
-- This is to read xml datafile
INSERT INTO XGBZ_PO_XML_DETAILS
(ministry_code ,
department_code ,
order_code ,
external_system_code ,
amendment_number ,
variation_number ,
description ,
status ,
status_date ,
payment_terms ,
bill_to ,
justification ,
create_timestamp ,
terminate_reason ,
terminate_timestamp ,
order_type ,
sub_business_unit ,
cost_center_group ,
buyer_code ,
financial_system_order_code ,
user_nric ,
supplier_code ,
supplier_name ,
gst_number ,
contact_name ,
contact_phone ,
contact_email ,
contact_fax ,
supp_site_id ,
supp_site_name ,
supp_site_phone ,
supp_sit_phone_ext ,
supp_site_fax ,
supp_site_email ,
supp_site_add_line1 ,
supp_site_add_line2 ,
supp_site_add_line3 ,
supp_site_country_code ,
supp_site_province ,
supp_site_state ,
supp_site_city ,
supp_site_area_code ,
supp_site_zip ,
supp_site_region_code ,
user_code ,
user_name ,
user_org_name ,
currency_code ,
currency_rate ,
currency_rate_date ,
currency_rate_type ,
currency_amount ,
tx_field_2 ,
agency_code ,
admin_fee_sgd ,
buyer_orgn_code ,
buyer_orgn_name ,
buyer_name ,
buyer_phone ,
buyer_fax ,
buyer_email ,
ao_code ,
ao_name ,
line_no ,
line_status ,
line_status_date ,
line_description ,
unit_of_measure ,
line_qty ,
line_type ,
unit_price ,
line_total_amount ,
material_master_code ,
material_group_code ,
item_category_code ,
line_admin_fee_sgd_amt ,
instruction_supplier ,
period_contract_line_no ,
goods_inspect_flag ,
pr_code ,
pr_line_number ,
nato_stock_number ,
manufacturer_part_no ,
part_number ,
cage_code ,
cage_name ,
item_condition ,
minimum_shelf_life ,
shelf_life_remaining ,
cert_of_conformance ,
export_license ,
line_location_no ,
line_loc_status ,
line_loc_status_date ,
line_loc_qty ,
delivery_destination ,
delivery_date ,
delivery_terms ,
port_of_origin ,
recipient_code ,
recipient_name ,
recipient_phone ,
recipient_email ,
dist_line_no ,
dist_line_status ,
dist_line_status_date ,
dist_line_qty ,
chart_of_account ,
project_distribution
SELECT --Header Data
ministry_code ,
department_code ,
order_code ,
external_system_code ,
amendment_number ,
variation_number ,
description ,
status ,
status_date ,
payment_terms ,
bill_to ,
justification ,
create_timestamp ,
terminate_reason ,
terminate_timestamp ,
order_type ,
sub_business_unit ,
cost_center_group ,
buyer_code ,
financial_system_order_code ,
user_nric ,
supplier_code ,
supplier_name ,
gst_number ,
contact_name ,
contact_phone ,
contact_email ,
contact_fax ,
supp_site_id ,
supp_site_name ,
supp_site_phone ,
supp_sit_phone_ext ,
supp_site_fax ,
supp_site_email ,
supp_site_add_line1 ,
supp_site_add_line2 ,
supp_site_add_line3 ,
supp_site_country_code ,
supp_site_province ,
supp_site_state ,
supp_site_city ,
supp_site_area_code ,
supp_site_zip ,
supp_site_region_code ,
user_code ,
user_name ,
user_org_name ,
currency_code ,
currency_rate ,
currency_rate_date ,
currency_rate_type ,
currency_amount ,
tx_field_2 ,
agency_code ,
admin_fee_sgd ,
buyer_orgn_code ,
buyer_orgn_name ,
buyer_name ,
buyer_phone ,
buyer_fax ,
buyer_email ,
ao_code ,
ao_name ,
line_no ,
line_status ,
line_status_date ,
line_description ,
unit_of_measure ,
line_qty ,
line_type ,
unit_price ,
line_total_amount ,
material_master_code ,
material_group_code ,
item_category_code ,
line_admin_fee_sgd_amt ,
instruction_supplier ,
period_contract_line_no ,
goods_inspect_flag ,
pr_code ,
pr_line_number ,
nato_stock_number ,
manufacturer_part_no ,
part_number ,
cage_code ,
cage_name ,
item_condition ,
minimum_shelf_life ,
shelf_life_remaining ,
cert_of_conformance ,
export_license ,
line_location_no ,
line_loc_status ,
line_loc_status_date ,
line_loc_qty ,
delivery_destination ,
delivery_date ,
delivery_terms ,
port_of_origin ,
recipient_code ,
recipient_name ,
recipient_phone ,
recipient_email ,
dist_line_no ,
dist_line_status ,
dist_line_status_date ,
dist_line_qty ,
chart_of_account ,
project_distribution
FROM XMLTable('/GEBIZ_ORDER'
passing lv_supp_file
columns
ministry_code VARCHAR2(3) path 'HEADER/MINISTRY_CODE',
department_code VARCHAR2(3) path 'HEADER/DEPARTMENT_CODE',
order_code VARCHAR2(17 ) path 'HEADER/ORDER_CODE',
external_system_code VARCHAR2(1) path 'HEADER/EXTERNAL_SYSTEM_CODE',
amendment_number VARCHAR2(5) path 'HEADER/AMENDMENT_NUMBER' ,
variation_number VARCHAR2(5) path 'HEADER/VARIATION_NUMBER',
description VARCHAR2(500) path 'HEADER/DESCRIPTION',
status VARCHAR2(500) path 'HEADER/STATUS',
status_date VARCHAR2(24) path 'HEADER/STATUS_DATE',
payment_terms VARCHAR2(400) path 'HEADER/PAYMENT_TERMS',
bill_to VARCHAR2(200) path 'HEADER/BILL_TO',
justification VARCHAR2(400) path 'HEADER/JUSTIFICATION',
create_timestamp VARCHAR2(24) path 'HEADER/CREATE_TIMESTAMP',
terminate_reason VARCHAR2(400) path 'HEADER/TERMINATE_REASON',
terminate_timestamp VARCHAR2(24) path 'HEADER/TERMINATE_TIMESTAMP',
order_type VARCHAR2(2 ) path 'HEADER/ORDER_TYPE',
sub_business_unit VARCHAR2(5 ) path 'HEADER/FINANCIAL_SYSTEM/SUB_BUSINESS_UNIT',
cost_center_group VARCHAR2(20 ) path 'HEADER/FINANCIAL_SYSTEM/NFS/COST_CENTER_GROUP',
buyer_code VARCHAR2(30 ) path 'HEADER/FINANCIAL_SYSTEM/NFS/BUYER_CODE',
financial_system_order_code VARCHAR2(20 ) path 'HEADER/FINANCIAL_SYSTEM/NFS/FINANCIAL_SYSTEM_ORDER_CODE',
user_nric VARCHAR2(9 ) path 'HEADER/FINANCIAL_SYSTEM/NFS/USER_NRIC',
supplier_code VARCHAR2(10) path 'HEADER/SUPPLIER/CODE',
supplier_name VARCHAR2(140) path 'HEADER/SUPPLIER/NAME' ,
gst_number VARCHAR2(30 ) path 'HEADER/SUPPLIER/GST_NUMBER',
contact_name VARCHAR2(140 ) path 'HEADER/SUPPLIER/CONTACT_NAME',
contact_phone VARCHAR2(23 ) path 'HEADER/SUPPLIER/CONTACT_PHONE',
contact_email VARCHAR2(100) path 'HEADER/SUPPLIER/CONTACT_EMAIL',
contact_fax VARCHAR2(23 ) path 'HEADER/SUPPLIER/CONTACT_FAX',
supp_site_id NUMBER path 'HEADER/SUPPLIER/SITES/SITE/ID',
supp_site_name VARCHAR2(140) path 'HEADER/SUPPLIER/SITES/SITE/NAME',
supp_site_phone VARCHAR2(23) path 'HEADER/SUPPLIER/SITES/SITE/PHONE',
supp_sit_phone_ext VARCHAR2(4 ) path 'HEADER/SUPPLIER/SITES/SITE/PHONE_EXTENSION',
supp_site_fax VARCHAR2(23 ) path 'HEADER/SUPPLIER/SITES/SITE/FAX',
supp_site_email VARCHAR2(100 ) path 'HEADER/SUPPLIER/SITES/SITE/EMAIL',
supp_site_add_line1 VARCHAR2(254 ) path 'HEADER/SUPPLIER/SITES/SITE/ADDRESS_LINE1',
supp_site_add_line2 VARCHAR2(35 ) path 'HEADER/SUPPLIER/SITES/SITE/ADDRESS_LINE2',
supp_site_add_line3 VARCHAR2(35 ) path 'HEADER/SUPPLIER/SITES/SITE/ADDRESS_LINE3',
supp_site_country_code VARCHAR2(2 ) path 'HEADER/SUPPLIER/SITES/SITE/COUNTRY_CODE',
supp_site_province VARCHAR2(25 ) path 'HEADER/SUPPLIER/SITES/SITE/PROVINCE',
supp_site_state VARCHAR2(25 ) path 'HEADER/SUPPLIER/SITES/SITE/STATE',
supp_site_city VARCHAR2(25 ) path 'HEADER/SUPPLIER/SITES/SITE/CITY',
supp_site_area_code VARCHAR2(10 ) path 'HEADER/SUPPLIER/SITES/SITE/AREA_CODE',
supp_site_zip VARCHAR2(20 ) path 'HEADER/SUPPLIER/SITES/SITE/ZIP',
supp_site_region_code VARCHAR2(3 ) path 'HEADER/SUPPLIER/SITES/SITE/REGION_CODE',
user_code VARCHAR2(16 ) path 'HEADER/USER/CODE',
user_name VARCHAR2(25 ) path 'HEADER/USER/NAME',
user_org_name VARCHAR2(95 ) path 'HEADER/USER/ORGANISATION_NAME',
currency_code VARCHAR2(3 ) path 'HEADER/FUND_COMMIT_AMOUNT/CURRENCY_CODE',
currency_rate NUMBER path 'HEADER/FUND_COMMIT_AMOUNT/CURRENCY_RATE',
currency_rate_date VARCHAR2(24) path 'HEADER/FUND_COMMIT_AMOUNT/CURRENCY_RATE_DATE',
currency_rate_type VARCHAR2(5 ) path 'HEADER/FUND_COMMIT_AMOUNT/CURRENCY_RATE_TYPE',
currency_amount NUMBER path 'HEADER/FUND_COMMIT_AMOUNT/CURRENCY_AMOUNT',
tx_field_2 VARCHAR2(17 ) path 'HEADER/PERIOD_CONTRACT/CODE',
agency_code VARCHAR2(6 ) path 'HEADER/PERIOD_CONTRACT/AGENCY_CODE',
admin_fee_sgd NUMBER path 'HEADER/PERIOD_CONTRACT/ADMIN_FEE_SGD_AMOUNT' ,
buyer_orgn_code VARCHAR2(5 ) path 'HEADER/BUYER/ORGANISATION_CODE',
buyer_orgn_name VARCHAR2(95 ) path 'HEADER/BUYER/ORGANISATION_NAME',
buyer_name VARCHAR2(80 ) path 'HEADER/BUYER/NAME',
buyer_phone VARCHAR2(23 ) path 'HEADER/BUYER/PHONE',
buyer_fax VARCHAR2(23 ) path 'HEADER/BUYER/FAX',
buyer_email VARCHAR2(100 ) path 'HEADER/BUYER/EMAIL',
ao_code VARCHAR2(16 ) path 'HEADER/APPROVING_OFFICERS/APPROVING_OFFICER/CODE',
ao_name VARCHAR2(40 ) path 'HEADER/APPROVING_OFFICERS/APPROVING_OFFICER/NAME',
items XMLTYPE path 'ITEMS'
) x1,
XMLTABLE('/ITEMS/ITEM'
passing x1.items
columns
line_no VARCHAR2(5) path 'LINE_NUMBER',
line_status VARCHAR2(15) path 'STATUS',
line_status_date VARCHAR2(24) path 'STATUS_DATE',
line_description VARCHAR2(500) path 'DESCRIPTION',
unit_of_measure VARCHAR2(3) path 'UNIT_OF_MEASURE',
line_qty NUMBER path 'QUANTITY',
line_type VARCHAR2(20) path 'LINE_TYPE',
unit_price NUMBER path 'UNIT_PRICE',
line_total_amount NUMBER path 'TOTAL_AMOUNT',
material_master_code VARCHAR2(20) path 'MATERIAL_MASTER_CODE',
material_group_code VARCHAR2(10) path 'MATERIAL_GROUP_CODE',
item_category_code VARCHAR2(18) path 'ITEM_CATEGORY_CODE',
line_admin_fee_sgd_amt NUMBER path 'ADMIN_FEE_SGD_AMOUNT',
instruction_supplier VARCHAR2(400) path 'INSTRUCTION_TO_SUPPLIER',
period_contract_line_no NUMBER path 'PERIOD_CONTRACT_LINE_NUMBER',
goods_inspect_flag VARCHAR2(1) path 'GOODS_INSPECT_FLAG',
pr_code VARCHAR2(17) path 'PURCHASE_REQUEST/CODE',
pr_line_number VARCHAR2(5) path 'PURCHASE_REQUEST/LINE_NUMBER',
nato_stock_number VARCHAR2(14) path 'PART_NUMBER_INFORMATION/NATO_STOCK_NUMBER',
manufacturer_part_no VARCHAR2(32) path 'PART_NUMBER_INFORMATION/MANUFACTURE_PART_NUMBER',
part_number VARCHAR2(200) path 'PART_NUMBER_INFORMATION/PART_NUMBER',
cage_code VARCHAR2(10) path 'PART_NUMBER_INFORMATION/CAGE_CODE',
cage_name VARCHAR2(140) path 'PART_NUMBER_INFORMATION/CAGE_NAME',
item_condition VARCHAR2(1) path 'PART_NUMBER_INFORMATION/ITEM_CONDITION' ,
minimum_shelf_life NUMBER path 'PART_NUMBER_INFORMATION/MINIMUM_SHELF_LIFE',
shelf_life_remaining VARCHAR2(3) path 'PART_NUMBER_INFORMATION/SHELF_LIFE_REMAINING',
cert_of_conformance VARCHAR2(1000) path 'PART_NUMBER_INFORMATION/CERTIFICATE_OF_CONFORMANCE',
export_license VARCHAR2(3) path 'PART_NUMBER_INFORMATION/EXPORT_LICENSE',
locations XMLTYPE path 'LOCATIONS'
)x2,
XMLTABLE('/LOCATIONS/LOCATION'
passing x2.locations
columns
line_location_no NUMBER path 'LINE_NUMBER',
line_loc_status VARCHAR2(15) path 'STATUS',
line_loc_status_date VARCHAR2(24) path 'STATUS_DATE',
line_loc_qty NUMBER path 'QUANTITY',
delivery_destination VARCHAR2(1000) path 'DELIVERY_DESTINATION',
delivery_date VARCHAR2(24) path 'DELIVERY_DATE',
delivery_terms VARCHAR2(3) path 'DELIVERY_TERMS',
port_of_origin VARCHAR2(150) path 'PORT_OF_ORIGIN',
recipient_code VARCHAR2(16 ) path 'RECIPIENT/CODE',
recipient_name VARCHAR2(40 ) path 'RECIPIENT/NAME',
recipient_phone VARCHAR2(23 ) path 'RECIPIENT/PHONE',
recipient_email VARCHAR2(100 ) path 'RECIPIENT/EMAIL',
distributions XMLTYPE path 'DISTRIBUTIONS'
)x3,
XMLTABLE('/DISTRIBUTIONS/DISTRIBUTION'
passing x3.distributions
columns
dist_line_no NUMBER path 'LINE_NUMBER',
dist_line_status VARCHAR2(15) path 'STATUS',
dist_line_status_date VARCHAR2(24) path 'STATUS_DATE',
dist_line_qty NUMBER path 'QUANTITY',
chart_of_account VARCHAR2(420) path 'CHART_OF_ACCOUNT',
project_distribution VARCHAR2(4000) path 'PROJECT_DISTRIBUTION'
)x4;
end;As there is change in requirement now I need to read the multiple supplier sites at the header level. Current this is my structure please give an idea how to read the mulitple sites as one record, probably i can increase the supplier site columns at table level so as to capture second site level information.
But if in case if i receive that time it should not fail please provide some good solution for this issue.
Thanks in advance for your help.
Regards
NagendraHi odie,
Thanks for your response. But here my supplier site will always be maxiumum 2 times and minimum 1 time. My thinking is to fit this one in the existing code by repeating the supplier site only like this
supp_site_id NUMBER path 'HEADER/SUPPLIER/SITES/SITE/ID',
supp_site_name VARCHAR2(140) path 'HEADER/SUPPLIER/SITES/SITE/NAME',
supp_site_phone VARCHAR2(23) path 'HEADER/SUPPLIER/SITES/SITE/PHONE',
supp_sit_phone_ext VARCHAR2(4 ) path 'HEADER/SUPPLIER/SITES/SITE/PHONE_EXTENSION',
supp_site_fax VARCHAR2(23 ) path 'HEADER/SUPPLIER/SITES/SITE/FAX',
supp_site_email VARCHAR2(100 ) path 'HEADER/SUPPLIER/SITES/SITE/EMAIL',
supp_site_add_line1 VARCHAR2(254 ) path 'HEADER/SUPPLIER/SITES/SITE/ADDRESS_LINE1',
supp_site_add_line2 VARCHAR2(35 ) path 'HEADER/SUPPLIER/SITES/SITE/ADDRESS_LINE2',
supp_site_add_line3 VARCHAR2(35 ) path 'HEADER/SUPPLIER/SITES/SITE/ADDRESS_LINE3',
supp_site_country_code VARCHAR2(2 ) path 'HEADER/SUPPLIER/SITES/SITE/COUNTRY_CODE',
supp_site_province VARCHAR2(25 ) path 'HEADER/SUPPLIER/SITES/SITE/PROVINCE',
supp_site_state VARCHAR2(25 ) path 'HEADER/SUPPLIER/SITES/SITE/STATE',
supp_site_city VARCHAR2(25 ) path 'HEADER/SUPPLIER/SITES/SITE/CITY',
supp_site_area_code VARCHAR2(10 ) path 'HEADER/SUPPLIER/SITES/SITE/AREA_CODE',
supp_site_zip VARCHAR2(20 ) path 'HEADER/SUPPLIER/SITES/SITE/ZIP',
supp_site_region_code VARCHAR2(3 ) path 'HEADER/SUPPLIER/SITES/SITE/REGION_CODE',
supp_site_id2 NUMBER path 'HEADER/SUPPLIER/SITES/SITE/ID',
supp_site_name2 VARCHAR2(140) path 'HEADER/SUPPLIER/SITES/SITE/NAME',
supp_site_phone2 VARCHAR2(23) path 'HEADER/SUPPLIER/SITES/SITE/PHONE',
supp_sit_phone_ext2 VARCHAR2(4 ) path 'HEADER/SUPPLIER/SITES/SITE/PHONE_EXTENSION',
supp_site_fax2 VARCHAR2(23 ) path 'HEADER/SUPPLIER/SITES/SITE/FAX',
supp_site_email2 VARCHAR2(100 ) path 'HEADER/SUPPLIER/SITES/SITE/EMAIL',
supp_site_add_line1_2 VARCHAR2(254 ) path 'HEADER/SUPPLIER/SITES/SITE/ADDRESS_LINE1',
supp_site_add_line2_2 VARCHAR2(35 ) path 'HEADER/SUPPLIER/SITES/SITE/ADDRESS_LINE2',
supp_site_add_line3_2 VARCHAR2(35 ) path 'HEADER/SUPPLIER/SITES/SITE/ADDRESS_LINE3',
supp_site_country_code_2 VARCHAR2(2 ) path 'HEADER/SUPPLIER/SITES/SITE/COUNTRY_CODE',
supp_site_province_2 VARCHAR2(25 ) path 'HEADER/SUPPLIER/SITES/SITE/PROVINCE',
supp_site_state_2 VARCHAR2(25 ) path 'HEADER/SUPPLIER/SITES/SITE/STATE',
supp_site_city_2 VARCHAR2(25 ) path 'HEADER/SUPPLIER/SITES/SITE/CITY',
supp_site_area_code_2 VARCHAR2(10 ) path 'HEADER/SUPPLIER/SITES/SITE/AREA_CODE',
supp_site_zip_2 VARCHAR2(20 ) path 'HEADER/SUPPLIER/SITES/SITE/ZIP',
supp_site_region_code_2 VARCHAR2(3 ) path 'HEADER/SUPPLIER/SITES/SITE/REGION_CODE',As this table I am being used in many areas, it will be problem for me if try to go for different levels of tables. Or else can it be possible to read only once
I mean only the first in the xml tags and leave the second xml. As there is not much significant for the second one.
I appreciate your ideas on this, as the structure we are following is to rigid so I don't have much options to explore, please provide me your inputs in this context.
Thanks for your help.
Regards
Nagendra
Edited by: 838961 on Jul 13, 2011 1:43 AM -
Reading A xml file and sending that XML Data as input to a Service
Hi All,
I have a requirement to read(I am using File adapter to read) a xml file and map the data in that xml to a service(schema) input variable.
Example of xml file that I have to read and the content of that xml file like below:
<StudentList>
<student>
<Name> ravi</Name>
<branch>EEE</branch>
<fathername> raghu</fathername>
</student>
<student>
<Name> raju</Name>
<branch>ECE</branch>
<fathername> ravi</fathername>
</student>
<StudentList>
I have to pass the data(ravi,EEE,raghu etc) to a service input varible. That invoked Service input variable(schema) contains the schema similar to above schema.
My flow is like below:
ReadFile file adapter -------------------> BPEL process -----> Target Service.I am using transform activity in BPEL process to map the data from xml file to Service.
I am using above xml file as sample in Native Data format(to create XSD schema file).
After I built the process,I checked file adapter polls the data and receive the file(I am getting View xml document in EM console flow).
But transform activity does not have anything and it is not mapping the data.I am getting blank data in the transform activity with only element names like below
---------------------------------------------------------------------------EM console Audit trail (I am giving this because u can clearly understand what is happening-----------------------------------------------------
-ReceiveFile
-some datedetails received file
View XML document (This xml contains data and structure like above xml )
- transformData:
<payload>
<InvokeService_inputvariable>
<part name="body">
<StudentList>
<student>
<name/>
<branch/>
<fathername/>
</student>
</StudentList>
</part>
</InvokeService_inputvariable>
'Why I am getting like this".Is there any problem with native data format configuration.?
Please help me out regarding this issue as I am running out my time.Hi syam,
Thank you very much for your replies so far so that I have some progrees in my task.
As you told I could have put default directory in composite.xml,but what happenes is the everyday new final subdirectory gets created in the 'soafolder' folder.What I mean is in the c:/soafolder/1234_xmlfiles folder, the '1234_xmlfiles' is not manually created one.It is created automatically by executing some jar.
Basically we can't know the sub folder name until it is created by jar with its own logic. whereas main folder is same(soafolder) ever.
I will give you example with our folder name so that it would be more convenient for us to understand.
1) yesterday's the folder structure : 'c:/soafolder/130731_LS' .The '130731_LS' folder is created automatically by executing some jar file(it has its own logic to control and create the subdirectories which is not in our control).
2) Today's folder structure : 'c:/soafolder/130804_LS. The folder is created automatically(everytime the number part(130731,130804).I think that number is indicating 2013 july 31 st like that.I have to enquire about this)is changing) at a particular time and xml files will be loaded in the folder.
Our challenge : It is not that we can put the default or further path in composite.xml and poll the file adapter.Not everytime we have to change the path in composite.xml.The process should know the folder path (I don't know whether it is possible or not.) and everyday and file adapter poll the files in that created subfolders.
I hope you can understand my requirement .Please help me out in this regard. -
Read of XML file and post to IDOC
Hi
I'm working on a <b>WAS620</b> and need to read an XML file from a customer, extract the fields needed and post these via IDOC ORDERS01. My problem is HOW to read the XML file? Can anyone give me the steps involved/links to examples etc - I have not processed XML files via ABAP before.
The file is posted to a shared folder and the ABAP I am about to develop will pick up this file.
The file is <b>NOT</b> in IDOC/XML format but the customers own format
Hope someone can help me asap.
Thanks all in advance
/BoHi,
I would like to extend this question for <b>WAS620</b> and <b>reading</b> a <b>proprietary customer specific XML</b> file/data that is <b>send via HTTP to SAP WAS</b>.
<b>Q1</b>: What is the best way to read this HTTP sent XML data (as it is, without transformations) into ABAP?
<b>Q2</b>: What is the appropriate handler to use in the ICF object?
Thanks all in advance -
Successful Read of XML File by Transforms Return Null
Hi:
I'm starting out with a simple BPEL process: Read an XML file, transform two fields. write an XML file. Both the read and write operations use the same .xsd file.
I am successful at creating, compiling, deploying, and executing the process. The output file contains empty tags. In the BPEL Console and can see each activity. The read activity shows the data read from the input file, arranged as expected. The I conclude that this activity works correctly. Here is what I see when I drill down on the first activity:
<?xml version="1.0" encoding="UTF-8" ?>
- <user-details>
- <user-list>
- <user>
<first-name>test1</first-name>
<last-name>abc</last-name>
<gender>male</gender>
<age>1</age>
</user>
</user-list>
</user-details>
The second activity shows empty values for the tags defined for the target variable. Here's what I see for the second activity, the Transform activity:
<Invoke_WriteOut_Variable><part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="user-details"><user-details xmlns:ns0="http://www.example-irfan.org" xmlns="http://www.example-irfan.org">
<ns0:user>
<ns0:firstName/>
<ns0:lastName/>
<ns0:gender/>
<ns0:age/>
</ns0:user>
</user-details>
</part></Invoke_WriteOut_Variable>
This second activity, the Transform, simply maps fields received from activity one too a new variable defined using the same .xsd as the first variable.
The third activity writes to the output file. Here is that file:
<?xml version="1.0" ?><user-details xmlns:ns0="http://www.example-irfan.org" xmlns="http://www.example-irfan.org">
<ns0:user>
<ns0:firstName/>
<ns0:lastName/>
<ns0:gender/>
<ns0:age/>
</ns0:user>
</user-details>
This is a "simple" 3-activity process, and I've reviewed it thoroughly. Can anyone help? It seems that the variable defined to accept the input xml file is not getting populated, although the process manager seems to say differently. Why would this be?
Thanks.Thank you for your response. My problem and confusion indeed relate to the xsd file. I know this because I can take one of the sample processes and modify it to perform the simple task that I want: open an xml file, transform a field or two, write to a new xml file. Still I have not been able to understand what BPEL considers a "valid" xsd file. I have tried like heck to match my xsd file to match the sample, but it still doesn't work.
So, my next question to anyone: does any documentation exist on the proper format for an xsd file? I have tried to take examples from on-line postings and blogs, but these don't work. It seems to me that the initial <schema> tag is the most important and that the http references in this tag are vital, but I can't tell for sure.
Any suggestions are appreciated.
Maybe you are looking for
-
Export a whole project from a computer to another
Hi everyone! I use Adobe Premiere pro CC7 and would like to export a Video montage project from a Macbook to a Windows computer and inversely. Do you know if it's possible, and how? Thank you!
-
Hi i want to by te lastest MacBook air 13" with 4 gb of RAM..... I want know if the MacBook air have any problem to work the games present in the mac apple store And if the game have any lag or any problem with the MacBook air
-
SecurityContext EL expression not working
When trying to apply this: #{securityContext.userInRole['roleList']} ... (#{securityContext.userInRole['Administrator']}) ... (#{securityContext.userInRole['Administrator,Spaces-User']}) to portlet visibility flag in Spaces it always returns false. B
-
Help with uninstalling Office 08 and reinstalling Office 04
Wasn't sure where to put this so I posted it here. I wanted to go back to Office 04 since 08 Excel dropped the Data Analysis Toolpak which is a necessity for me in my science classes at school. I have the Office 04 install disk somewhere at home but
-
How can we see print preview when executing T Code?
We create a one T Code . This T.code is assigned to one programme. Programme is assigned to one smart form. When I execute New T code . The system is asking input parameters than executing Tcode system is terminating the screen.