Problem using WEBUTIL_FILE_TRANSFER

I am using WEBUTIL_FILE_TRANSFER to load documents into a table and then open them for editing. I have followed the general form of the demos in WEBUTIL_DOC.fmb. I can transfer a document to the database and save it. I transfer the document back to the client for editing and resave it repeatedly.
However, when I add a second row to the table and add a second object, the first object seems to go away. When I try to transfer the first object back to the client for editing using DB_TO_CLIENT, I get WUT-110 LOB of zero length. The second object is okay.
Does anyone know why that would be happening?

Harm,
I get the same error here, but my file is not being uploaded.
You need to provide a string to the progressSubtitle parameter of the client_to_as_with_progress function, not only ''.
This works for me.
HTH
Gerald

Similar Messages

Problem using WEBUTIL_FILE_TRANSFER.URL_To_Client_With_Progre

Dear Friend,
Whenever I am trying to transfer the report using WEBUTIL_FILE_TRANSFER.URL_To_Client_With_Progress the report is getting transfered from application server to client successfully. But when i am opening the report at clientside adobe reader is giving error "Adobe could not open file test1.pdf because it is either not a supported file type or because the file has been damaged".
But when i am seeing the report output in enterprise manager it is properly opening in pdf.
Please see the below code for your reference :
declare
v_rep varchar2(100);
v_rep_stat varchar2(200);
repid REPORT_OBJECT;
v_mode varchar2(1000);
xstatus boolean;
xclient_filename varchar2(1000) := 'e:\sam\new\test1.pdf';
xserver_filename varchar2(1000) := 'f:\dump\test1.pdf' ;
repid := find_report_object('r1');
set_report_object_property(repid,report_comm_mode,synchronous);
set_report_object_property(repid,report_execution_mode,batch);
set_report_object_property(repid,report_server,repserv);
set_report_object_property(repid,report_destype,file);
set_report_object_property(repid,REPORT_DESNAME,xserver_filename);
v_mode := ' mode=default';
set_report_object_property(repid,report_desformat,'pdf');
set_report_object_property(repid,report_filename,'test');
set_report_object_property(repid,report_other,v_mode);
v_rep := run_report_object(repid,plist);
v_rep_stat := report_object_status(v_rep);
if v_rep_stat = 'FINISHED' THEN
xstatus := WEBUTIL_FILE_TRANSFER.URL_To_Client_With_Progress('http://development:7778/reports/rwservlet?'||'&server='||repservername,xclient_filename,0,'Download','Save','Saving Output File');
if xstatus then
message('Report Generated Successfully');
message('Report Generated Successfully');
end if;
end if;
Please point out where is the problem. Its urgent.

I can see at least one error in the line with URL_To_Client_With_progress. I haven't tried fetching PDF's this way myself, so I don't know if it will work, but in any case - you specify the reports server file name correctly, but there's no indication of the jobID to fetch the generated PDF for.
Does this work?
xstatus := WEBUTIL_FILE_TRANSFER.URL_To_Client_With_Progress('http://development:7778/reports/rwservlet/getjobid' || repid ||'&server='||repservername ,xclient_filename,0,'Download','Save','Saving Output File');
Jacob

PROBLEMS USING WEBUTIL_FILE_TRANSFER AND CLIENT_HOST COMMAND TO VIEW BLOB

I am using webutil_file_transfer.DB_To_Client_with_progress to retrieve a blob
from the database (that was saved in a word format) into a .doc file on the
client.
1st problem: The document that is being saved is not readable. It has all
kind of special characters in it.
Then using the client_host command, I open the document into ms word.
2nd problem: The document opens fine (again not readable in garbage
characters) but when I close the document, notepad pops up blank with nothing
in it.
Below is a sample of the code.:
PROCEDURE DOWNLOAD_DB IS
l_success boolean;
username varchar2(30);
document_name varchar2(20);
wordexe varchar2(20);
BEGIN
     username := webutil_clientinfo.get_user_name;
     document_name := 'wo'||:wod.fk_work_order_number||'.doc';
     :locals.file_name := 'Documents and Settings\'||username||'\my documents\'||document_name;
l_success := webutil_file_transfer.DB_To_Client_with_progress
(clientFile => 'C:\'||:locals.file_name
,tableName => 'DEFECTS'
,columnName => 'DESCRIPTION'
,whereClause => 'FK_WORK_ORDER_DATE_ID = '||:DEF.FK_WO_DATE_ID
,progressTitle => 'Defect document being opened'
,progressSubTitle=> 'Please wait'
if l_success
then
CLIENT_HOST('cmd /c start /wait winword.exe C:\'||'"'||:locals.file_name||'"');
else
message('File download from Database failed');
end if;
exception
     when others
     then
     message('File download failed: '||sqlerrm);
END;
Any ideas?

Hello,
I use this kind of code with 9i and 10g and it works fine with word, excel and any of windows files.
I think that, if the file is not correct, the cause may be the first save of the file in the database.
Which instruction did you use to save first the doc in the BLOB column ?
Francois

Problem using webutil_file_transfer.AS_to_Client

I have configured webutil package successfully
I have made the following configuration to webutil.cfg:
transfer.database.enabled=TRUE
transfer.appsrv.enabled=TRUE
transfer.appsrv.accessControl=TRUE
#List transfer.appsrv.read.<n> directories
transfer.appsrv.read.1=c:\temp
#List transfer.appsrv.write.<n> directories
transfer.appsrv.write.1=c:\temp
I have the following code:
BEGIN
 IF NOT webutil_file_transfer.AS_to_Client('C:\temp\saad.pdf', 'C:\temp\saad.pdf') THEN
 message('Upload was not successful');
 ELSE
 message('Upload was successful');
 END IF;
END;
I always got "Upload was not successful" can any body tell me what the problem is ?

Francois Degrelle wrote:
- be sure that the first argument is the client machine file and the second the server file
FRancois
It is OK
Francois Degrelle wrote:
- at runtime, display the Java console to see if there is any error message
FRancois
No Errors
Francois Degrelle wrote:
- try another function in the Webutil_File_Transfert package
FRancois
I have tried client_to_db successfully

Problem reading file after using webutil_file_transfer.as_to_client

Hi all,
The Forms webapplication I'm working on has to talk with a cardreading-application on the client-PC. The communication is carried out by exchanging small files. Reading from the client by Forms on the AS goes well (using client_text_io from webutil). The problem arises when the application has to respond back with a file. The file is made on the AS and then transfered from the AS to the client using webutil_file_transfer.as_to_client. This file can not be read by the cardreading application when the AS is on Linux. Our developement AS server is on a Windows 2000 box and then the communication doesn't show this problem.
If I open the file from the AS on Linux , I can see that there is only 1 long line. The Windows version of the file contains 2 lines (as it should be). It seems that before/during/after the transfer some special characters like carriage return and tab are causing the problem.
Looking in web_file_transfer.as_to_client I see that the procedure reads lines from a temporary file into a buffer. The lines are separated by a CHR(10). Could the transfer from Linux to Windows(DOS) cause a problem with these characters ?
Has anyone experienced this problem ? If someone has a clue this would be very welcome.
We work with :
- Forms and AS 10.1.2.0.2
- Webutil 1.0.6
- Development OS: Windows 2000 (Service Pack 4)
- Production OS: Red Hat Enterprise Linux AS release 3 (Taroon Update 3)
- Client-PC OS: Windows 2000 (Service Pack 4)
Thanx,
Enrico

Without going into a long winded answer, the only thing I can really offer is to say this... If you feel as though your code has been correctly written and you simply cannot identify any other possible solution, add SYNCHRONIZE. In short, its execution acts similar to a reset or refresh button.
Another common place where SYNCHRONIZE has been helpful is when calling RUN_REPORT_OBJECT. For example, if you use the code we offer in the Forms/Reports Integration document you will find that it works very well - most of the time. However, sometimes it fails for what seems to be unexplainable reasons. If you message out the values being assigned you will see that some variable values are not being set even though the code execution has already passed the point where a value should have been assigned. Adding the SYNCHRONIZE just after the point where the value should have been assigned forces the assignment before executing the next line of code. For example,
     v_rep := RUN_REPORT_OBJECT(repid);
     rep_status := report_object_status(v_rep);
In the above code, a request for a report is made followed by a check of its status. At this point you would expect that the status would be something like one of the following:
     'RUNNING', 'OPENING_REPORT', 'ENQUEUED'
However, we have seen instances where the value assigned to the variable would actually be NULL, which of course will make the rest of the code likely fail. By adding SYNCHRONIZE the problem is correctable.
     v_rep := RUN_REPORT_OBJECT(repid);
     rep_status := report_object_status(v_rep);
     SYNCHRONIZE;
It is important to understand, however that using SYNCHRONIZE comes at a price. Each time it is executed a network round-trip occurs which will give the application the appearance of degraded performance. So use this built-in only when you know you must.

Unable to run UNIX command after uploading file using webutil_file_transfer

OS: UNIX Solaries , Oracle Application Server 10g
I designed a form contains 2 buttons
1- Upload button: to let the user upload form.fmb file to the application server using webutil_file_transfer function
2- Compile button to compile the uploaded form in the applications server to generete the FMX using the following command
host('/bin/bash /u01/oracle/runtime/test/frmkfccmp.sh >/u01/oracle/runtime/test/log.log'); The problem is after uploading the file to the server, the Compile button don't work, although it works well if I close the form then open it again and press the Compile button without pressing the Upload button
Any help is appreciated
Thanks and Regards

Add the weblogic server's bin directory to your PATH. You will need to a couple of WLS jars to the CLASSPATH. There might be something in the installation/setup documentation that tells you all this. I have only used WLS 5.1 and 7.0.

Problem using File sharing in a small office network

I have a problem using File sharing on an Imac and Macbook Pro.
My office has a small network running Windows Small office file server 2003. I have one Windows 2000 PC connected to it and 3 Macs, an 2.4 gHz Intel iMac running Leopard 10.5.6 , a MBP running the same and a Mac Mini running 10.5.
From the Finder Shared window of the Mac Mini, I can see all the computers on the network. It also used to be the case for the iMac, but the MBP could never see the Windows PC’s, not the server or the Win2000. This wasn’t a big problem as I was communicating between the Macs and using the shared printer on the iMac.
On Monday Jan 19 the iMac was suddenly unavailable to the other 2 Macs. It was working normally on the Friday. The iMac can access the Mac Mini and copy files to it. The Mac Mini can see the iMac but cannot access it. Even trying to connect as, ends in a failed connection. I have tried rebooting, turning File sharing off and then on again to no avail.
The iMac now also cannot see the Windows PC’s which it previously could.
To get files from the MBP for printing, I now copy it to the Mac Mini and acces the folder from the iMac, a very tedious procedure. I don’t know why this happened and am scared that the Mac Mini is going to do the same thing.
All three computers are also running VMware 2.0 with Windows XP pro, and from VMware the server is visible on all the computers.
Any help will be much appreciated, I live in a small town in South Africa and the local computer suppliers have no knowledge of the Macs.
I think that the problem with the iMac may have started after a software upgrade to 10.5.6 but I am not entirely sure.
Thank you
ajdk

Well, you're current method sounds pretty good. But if you want to user a file server, hey go ahead.
What you want to do when you centralize project files is to keep track of which one is the newest and becareful not to overwrite files with the same name. So you either have to set up individual spaces on the server (separate AFP/FTP folders maybe), or you'll need to run a file checkout service.
The individual space is cheaper, but it's not much of a difference from backing up to the network drive. Since you have Gigabit connections, you might even opt to save ALL the user files on the server instead of just the project files.
If you want to run a file checkout service, there's two approaches. You can run a service that can host any kind of file, or you can run a version control system for each kind of application (Photoshop, Word, etc.). Please notice, that as you read further and further along, the methods become more and more expensive and complicated. Once you get to this point, it will be necessary to purchase or build software in addition to the Mac OS X Server package.

Huge problem using apple mail while sending email to a group...

Hey - I am quite confused... apple mail has huge problems using groups with about 150 addresses when writing and sending an email... the writing of emails is nearly impossible. Once the group name is inserted in the addressline (address book in iCloud!), apple mail uses nearly 100% CPU and further writing is nearly impossible. When sending such an email, all addresses are suddenly visible - though the box is NOT checked and the addresses should be hidden... what can I do? I use this feature (sending mails to groups) on a daily basis and cannot accept visible addresses...
Greetings and sorry for inconvenient english...
Christof

How about next time you send to the group, cc yourself, or include yourself in the group. Then receive the email on the iphone, you can "reply all" in order to send to the group. If you use an imap account, you can make a new folder, call it something like "groups", and save different group emails there for the next time you need to "reply all".

Hi. I am just about to move from the UK to Kuwait. Will I have any problems using my iPhone 4 and able to join a local carrier using this device please?

Hi. I am just about to move from the UK to Kuwait. Will I have any problems using my iPhone 4 and able to join a local carrier using this device please?

If your phone is locked to a particular carrier, you must contact them to request they unlock it. Once they've taken care of that and you've followed the instructions to complete the unlock process, you will be able to use the phone elsewhere.
~Lyssa

Problem using integrated WLS in jDeveloper 11.1.2.1.0

Hey there,
I got a problem using the integrated WLS from the jDeveloper 11.1.2.1.0.
After trying to deploy an ADF Web Application on the integrated WLS, I get the following log message:
LOG
+[Waiting for the domain to finish building...]+
+[11:26:04 AM] Creating Integrated Weblogic domain...+
+[11:28:13 AM] Extending Integrated Weblogic domain...+
+[11:30:06 AM] Integrated Weblogic domain processing completed successfully.+
*** Using HTTP port 7101 ***
*** Using SSL port 7102 ***
+/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/bin/startWebLogic.sh+
+[waiting for the server to complete its initialization...]+
+.+
+.+
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
+.+
WLS Start Mode=Development
+.+
CLASSPATH=/home/robin/bin/wls/oracle_common/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar:/home/robin/bin/wls/patch_wls1211/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/robin/bin/wls/patch_oepe100/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/robin/bin/wls/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/robin/bin/wls/jdk160_29/lib/tools.jar:/home/robin/bin/wls/wlserver_12.1/server/lib/weblogic_sp.jar:/home/robin/bin/wls/wlserver_12.1/server/lib/weblogic.jar:/home/robin/bin/wls/modules/features/weblogic.server.modules_12.1.1.0.jar:/home/robin/bin/wls/wlserver_12.1/server/lib/webservices.jar:/home/robin/bin/wls/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/home/robin/bin/wls/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/home/robin/bin/wls/oracle_common/modules/oracle.jrf_11.1.1/jrf.jar:/home/robin/bin/wls/wlserver_12.1/common/derby/lib/derbyclient.jar:/home/robin/bin/wls/wlserver_12.1/server/lib/xqrl.jar
+.+
PATH=/home/robin/bin/wls/wlserver_12.1/server/bin:/home/robin/bin/wls/modules/org.apache.ant_1.7.1/bin:/home/robin/bin/wls/jdk160_29/jre/bin:/home/robin/bin/wls/jdk160_29/bin:/usr/local/bin:/usr/bin:/bin:/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.5.3:/usr/games/bin
+.+
+* To start WebLogic Server, use a username and *+
+* password assigned to an admin-level user. For *+
+* server administration, use the WebLogic Server *+
+* console at http://hostname:port/console *+
starting weblogic with Java version:
java version "1.6.0_29"
Java(TM) SE Runtime Environment (build 1.6.0_29-b11)
Java HotSpot(TM) Client VM (build 20.4-b02, mixed mode)
Starting WLS with line:
+/home/robin/bin/wls/jdk160_29/bin/java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=/home/robin/bin/wls/wlserver_12.1/server/lib/weblogic.policy -Djavax.net.ssl.trustStore=/tmp/trustStore7618453572230021232.jks -Dhttp.proxyHost=emea-proxy.uk.oracle.com -Dhttp.proxyPort=80 -Dhttp.nonProxyHosts=localhost|localhost.localdomain|127.0.0.1|::1|MUELLER-BADY-GENTOO|MUELLER-BADY-GENTOO -Dhttps.proxyHost=emea-proxy.uk.oracle.com -Dhttps.proxyPort=80 -Doracle.jdeveloper.adrs=true -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -Djava.endorsed.dirs=/home/robin/bin/wls/jdk160_29/jre/lib/endorsed:/home/robin/bin/wls/wlserver_12.1/endorsed -da -Dplatform.home=/home/robin/bin/wls/wlserver_12.1 -Dwls.home=/home/robin/bin/wls/wlserver_12.1/server -Dweblogic.home=/home/robin/bin/wls/wlserver_12.1/server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=/home/robin/bin/wls/oracle_common -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain -Djrockit.optfile=/home/robin/bin/wls/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt -Doracle.server.config.dir=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/config/fmwconfig/servers/DefaultServer -Doracle.domain.config.dir=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/config/fmwconfig -Digf.arisidbeans.carmlloc=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/config/fmwconfig/carml -Digf.arisidstack.home=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/config/fmwconfig/arisidprovider -Doracle.security.jps.config=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/config/fmwconfig/jps-config.xml -Doracle.deployed.app.dir=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/servers/DefaultServer/tmp/_WL_user -Doracle.deployed.app.ext=/- -Dweblogic.alternateTypesDirectory=/home/robin/bin/wls/oracle_common/modules/oracle.ossoiap_11.1.1,/home/robin/bin/wls/oracle_common/modules/oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/oracle/store/gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/home/robin/bin/wls/patch_wls1211/profiles/default/sysext_manifest_classpath:/home/robin/bin/wls/patch_oepe100/profiles/default/sysext_manifest_classpath:/home/robin/bin/wls/patch_ocp371/profiles/default/sysext_manifest_classpath weblogic.Server+
+<Feb 10, 2012 11:30:09 AM CET> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>+
+<Feb 10, 2012 11:30:10 AM CET> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>+
+<Feb 10, 2012 11:30:11 AM CET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 20.4-b02 from Sun Microsystems Inc..>+
+<Feb 10, 2012 11:30:12 AM CET> <Info> <Management> <BEA-141107> <Version: WebLogic Server 12.1.1.0 Wed Dec 7 08:40:57 PST 2011 1445491 >+
+<Feb 10, 2012 11:30:15 AM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING.>+
+<Feb 10, 2012 11:30:15 AM CET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool.>+
+<Feb 10, 2012 11:30:15 AM CET> <Notice> <Log Management> <BEA-170019> <The server log file /home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/servers/DefaultServer/logs/DefaultServer.log is opened. All server side log events will be written to this file.>+
Feb 10, 2012 11:30:24 AM oracle.security.jps.internal.keystore.file.FileKeyStoreManager saveKeyStore
WARNING: Failed to save farm keystore. Reason {0}
Feb 10, 2012 11:30:24 AM oracle.security.jps.internal.keystore.file.FileKeyStoreManager createKeyStore
WARNING: Failed to save farm keystore. Reason {0}
oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06513: Failed to save farm keystore. Reason
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.createKeyStore(FileKeyStoreManager.java:309)+
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:95)+
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:73)+
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:63)+
+ at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:157)+
+ at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:64)+
+ at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)+
+ at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)+
+ at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:191)+
+ at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:132)+
+ at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:127)+
+ at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:850)+
+ at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:844)+
+ at java.security.AccessController.doPrivileged(Native Method)+
+ at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:844)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:284)+
+ at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)+
+ at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)+
+ at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)+
+ at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)+
+ at java.lang.reflect.Constructor.newInstance(Constructor.java:513)+
+ at java.lang.Class.newInstance0(Class.java:355)+
+ at java.lang.Class.newInstance(Class.java:308)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1343)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)+
+ at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)+
+ at weblogic.security.SecurityService.start(SecurityService.java:148)+
+ at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)+
+ at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)+
+ at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)+
+<Feb 10, 2012 11:30:24 AM CET> <Error> <Security> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider>+
+<Feb 10, 2012 11:30:24 AM CET> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider+
+weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1402)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)+
+ at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)+
+ at weblogic.security.SecurityService.start(SecurityService.java:148)+
+ at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)+
+ Truncated. see log file for complete stacktrace+
+Caused By: oracle.security.jps.JpsRuntimeException: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:293)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:284)+
+ at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)+
+ at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)+
+ at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)+
+ Truncated. see log file for complete stacktrace+
+Caused By: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider+
+ at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:899)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:284)+
+ at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)+
+ at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)+
+ Truncated. see log file for complete stacktrace+
+Caused By: java.security.PrivilegedActionException: oracle.security.jps.JpsException: [PolicyUtil] Unable to obtain default JPS Context!+
+ at java.security.AccessController.doPrivileged(Native Method)+
+ at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:844)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:284)+
+ at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)+
+ Truncated. see log file for complete stacktrace+
+Caused By: oracle.security.jps.JpsException: [PolicyUtil] Unable to obtain default JPS Context!+
+ at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:860)+
+ at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:844)+
+ at java.security.AccessController.doPrivileged(Native Method)+
+ at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:844)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)+
+ Truncated. see log file for complete stacktrace+
Caused By: oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06513: Failed to save farm keystore. Reason
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.createKeyStore(FileKeyStoreManager.java:309)+
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:95)+
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:73)+
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:63)+
+ at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:157)+
+ Truncated. see log file for complete stacktrace+
+>+
+<Feb 10, 2012 11:30:24 AM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED.>+
+<Feb 10, 2012 11:30:24 AM CET> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down.>+
+<Feb 10, 2012 11:30:24 AM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN.>+
Process exited.
*/LOG*
After that, I tried setting permissions for the cwallet.sso file to ugo+rwx, but this leads to the same problems as mentioned above.
My second try was to setup an external WLS 12c, but it seems to be not yet possible to connect to a WLS 12c from within jDeveloper.
Do you have any ideas ?
Thank you in advance for your help.
Regards,
Robin

After debugging the WLS Initialisation with jdb, I recognized that there was some trouble with dependent libraries.
In the end, I solved my problem by using another OS (Ubuntu 11.10) for development. There, the WLS works out of the box, even with 64-Bit libraries.
Thank you for your help.
Regards,
Robin

SAP Crystal Reports data source connection problem using sap business one

Hi,
I m facing a problem regarding: SAP Crystal Reports data source connection problem using sap business one
I am trying to create a Crystal report but when I try to configure a new connection it does not work.
I select Sap Business One data source and try to complete the information required to connection but it does not list my companies databases, what is the problem?
Our Current SAP related software details are as follows:
OS: Windows Server 2008
SAP B1 Version: SAP B1 9 (902001) Patch 9
SAP Crystal Report Version: 14.0.4.738 RTM
Database: MS SQL Server 2008 R2
I have also added some screenshots of the issues.
Please have a look and let me know if you have any questions or any further clarifications.
I m eagerly waiting for a quick and positive reply.

Hi,
There is problem with SAP Business One date source.
I had faced same problem, I used OLEDB Data-source, and it worked fine for me.
So, try to use OLEDB.
Regards,
Amrut Sabnis.

Calendar Server 3.5: Problem using user's ID with uniuser -mod command

When there are two users who have the same Common Name (CN) in LDAP but
different User ID's (uid
field), I have a problem using the uid
field as an argument to
uniuser -mod in Netscape Calendar
Server (NCS) 3.5. For example, there may be two users, User1 and User2, who
both have the CN "John Smith." 

User1
uid: jsmith2
sn: Smith
givenname: John
nscalxitemid: 10001:00314
User2
uid: jsmith
sn: Smith
givenname: John
nscalxitemid: 10001:00213

Let's say I want to change the value for nsCalOrgUnit2
for User1 to "jsmith." In NCS 4.0,
I can specify the uid as
an argument to uniuser -mod
. However, in NCS 3.5, if I specify the
uid as an argument to
uniuser -mod, the entry
for the user does not get changed. 

Calendar Server 4.0 

%uniuser -mod "ID=00314" -m "OU2=jsmith/OU3=People" -n 10001
 
uniuser: modified "Smith, John" 

(The LDAP entry for User1 also reflects this change.)

Calendar Server 3.5 

%uniuser -mod "ID=00314" "OU2=jsmith/OU3=People" 10001
 
uniuser: no need to modify "Smith,John" 

(The LDAP entry for User1 does not reflect the change.) 

%uniuser -mod "S=Smith/G=John/ID=00314" "OU2=jsmith/OU3=People"
10001 
uniuser: no need to modify "Smith,John" 

(The LDAP entry for User1 does not reflect the change.) 

If I use the command uniuser -mod "S=Smith/G=John"
"OU2=jsmith/OU3=People" 10001
in NCS 3.5, the script will change the entry of the first "John Smith" in the
database and will cause the LDAP entry for this user to be updated as well.
However, the entry modified may or may not be the correct one. So, in
NCS 3.5, is there a way to specify a particular uid
to ensure that the correct LDAP entry
is modified?

To modify a user's information using the uid
field in Calendar Server 3.5, change
the user.ini file. The
following steps show how to change a user's information by modifying the
.ini file: 

<OL>
<LI>Open the user.ini
file, which is in the path /users/unison/misc/user.ini

<LI>Add a section containing the desired changes. For example, 

[Test] 
OU2 = jsmith 
OU3 = People 

<LI>Run uniuser with
the following options: 

% uniuser -mod "ID=00314" -s Test 10001
</OL>

It turns out to be a problem with the user Keychain. It has some weird entry that was sending the wrong password. I delete all entries to the server and that corrected the problem

Problem using a conditional suppress in a cross-tab ?

is there a problem using a conditional suppress in a cross-tab on a row or summarized field in crystal XI?
I am using the following conditional suppress on a summarized field and its rows
         If {@SortCode}=4 then true;
Sortcode is a group sorting formula field
the summarized field is a formula field as well.
All of the summarized fields are suppressed although the cross- tab performs correctly on @Sortcode and the summarized field when not using the condition
it seems to me to be a reporting flow issue although i've included "whileprintingrecords" and "evaluateafter" with no success.
i have also moved the cross-tab from the report header to group header and applied a conditional suppress on the group header through section expert.
this supresses the group i dont want but includes grand totals for each group and also varys the number of columns
i can't filter on sortcode because one of the grand total calculations requires those records and a subreport or second cross-tab does not contain the same number of columns
the cross-tab is necessary as a client may have columns spanning one to many pages
thanks for your help

Hi I have a similar problem,
I have an clock in solution, where i have some dates with data such as, various entries for a date eg, 01/11/2010 1hr, 01/11/2010 3 hrs etc, 03/11/2010 2hrs , 05/11/2010 4.5hrs, 05/11/2010 4 hrs so i need total for each day and highlight only those days, where total is less than 4.5, including days which donu2019t have records eg 02/11/2010 & 04/11/2010, I summarise in totals using a cross tab, to get summarised output for each day as,
            Totals
01/11/2010    4
03/11/2010    2
05/11/2010    8.5
in order to get the dates which didnu2019t have records, i added a dataset from Excel spreadsheet where i just have a sequential dates for the year , and use record selection to select only those dates in range which i need to display, so the result i get
01/11/2010    4
02/11/2010    0
03/11/2010    2
04/11/2010    0
05/11/2010    8.5
so far so good, all using cross tab, now i want to suppress rows which have total > 4.5 so the result should be
01/11/2010    4
02/11/2010    0
03/11/2010    2
04/11/2010    0
How can i do that?

Could not complete the command because of a problem using the Adobe Color Engine

Hi all
This bizarrely started this morning - completely out of the blue - and I've no idea why.
Setup: Mac 10.8.2 / Creative Suite Premium PhotoShop CS5 extended (patched to 12.04)
Am working on images exported from LightRoom 4 (16bit A3 Pro Photo RGB PSDs) in PhotoShop CS5.
As part of my image grading process I have a PhotoShop Action that does the following: copy layer to new document (document respects all of copied layer settings) > Image > Adjustments > HDR toning > apply a certain HDR preset > copy to resultant image back to original doc > set opacity as 40%.
Totally out of the blue, after having this action for about 2 months, this morning I start getting a warning dialog of "Could not complete the command because of a problem using the Adobe Color Engine" and the action fails. The failure seems to take place at the 'make document' part of the action and seems to somehow be related to the contents of the clipboard.
I've tried trashing and re-creating the action. It works first time out fine and then - on the next image - errors again.
At present I can only safely carry out the work 'manually' by completing all the actions myself.
I can think of no settings that have changed and the OS hasn't been updated in a while.
I have found one other thread on a similar problem in PhotoShop Elements, but no definitive solution.
Any help appreciated as I have a shedload of stuff to process.
Best wishes
TP

OK: trash of prefs didn't work. Tried thrice. Re-created orig action. same problem.
BUT!
Your 'Image > Duplicate' suggestion does seem to work. If I use that in a new action as the method for creating the HDR version doc (instead of 'Select > Copy > New > Paste), it seems to work.
Will try that out this afternoon, but for now: WIN!
Many thanks for the suggestion!
TP

When ever I try to watch any video, from a link or YouTube say, using Firefox, I get a message 'An error as occurred. Please try again later'. It has been this way for some weeks. I don't have this problem using Safari or Opera.

When ever I try to watch any video, from a link or YouTube say, using Firefox, I get a message ‘An error as occurred. Please try again later’. It has been this way for some weeks. I don’t have this problem using Safari or Opera.

I believe that our “Werbung problem” adds an additional second hyperlink to the pop-up window. This second link is activated whenever you trigger a saved hyperlink to a Mail.com site.
I had the same problem and eliminated it by deleting all bookmarks, hyperlinks and automatic links that take firefox to a mail.com address. So I just deleted all bookmarks I had saved for mail.com. I also changed my home page link because it also went to my email at mail.com. I then did a warm boot, opened firefox and re-saved my bookmarks and homepage to the desired addresses. Good luck.

Problem using WEBUTIL_FILE_TRANSFER

Similar Messages

Maybe you are looking for