Problem using Yahoo Video Playlists after upgrading Firefox

I have Created Yahoo playlists in the past and after upgrading my Firefox they no longer work. meaning when i click on a playlist everything loads properly except the video itself and I can't play any of the other videos in the playlist either. Also i can't add new songs to those playlists or rate those videos either.

This is not a Firefox issue, you could try downgrading to version 18 or 17 but Yahoo needs to update their toolbar and they haven't been doing anything to solve issues regarding them except by laying the blame on us.

Similar Messages

[Solved] Problem with xf86-video-intel after upgrade to xorg 1.16

Hi everyone,
since the upgrade to xorg-server 1.16 i can't get X to work again on my thinkpad R50e with an old intel integrated chip (Intel Extreme Graphics 2).
I first encountered the error "cannot open /dev/tty0": http://okraits.de/upload/xorg/Xorg.0.log
Then i created /etc/X11/Xwrapper.config: http://okraits.de/upload/xorg/Xwrapper.config
Then i got the error "failed to set mode": http://okraits.de/upload/xorg/Xorg.1.log
My xorg.conf looks like this: http://okraits.de/upload/xorg/xorg.conf
I start X with startx and this .xinitrc: http://okraits.de/upload/xorg/.xinitrc
I have no clue how to fix this. Any help would be much appreciated!
Greetings,
Oliver
Last edited by okraits (2014-08-08 06:33:09)

lolilolicon wrote:
How do you start X? Note you must start X from the same VT where you login, if you use Xorg.bin (no setuid). From your log there're mentions of /dev/tty0 and "Using VT number 2", so I suppose that might be the problem.
If you simply use `startx`, the actual process running will be something like
/usr/bin/Xorg.bin -nolisten tcp :0 -auth /tmp/serverauth.XXXXXXXXXX vt1
Note the `vt1` in the line must be specified, where 1 is the value of $XDG_VTNR in the VT where you login.
Edit
In my log there's something yours are missing
[ 45.465] (++) using VT number 1
[ 45.465] (--) controlling tty is VT number 1, auto-enabling KeepTty
I login at tty1 (which is the first one visible after boot) and run startx from there.
I added the following to my .xinitrc:
echo "vt: $XDG_VTNR"
The output was:
vt: 1
That would be ok, right? Or is it $XDG_VTNR + 1?
So i am wondering what is forcing X to use vt 2. Or how i can tell X to use vt 1.
Last edited by okraits (2014-08-07 12:37:17)

Problem with some video files after upgrading to iPhoto'11 ...

Hi,
I just realized that after converting from iPhoto'09 to iPhoto'11, I found 176 small video files that don't play anymore. All problem files, can be found in iPhoto with a «.MOV» search. When played I get this error message (it's in French :
The problem is that I cannot find any file nested in my iPhoto Library corresponding to the iPhoto's info (name or size). I get no corresponding file. Also most of these «.MOV» files seem to have another file that plays and that is bigger. It could be the original file or maybe my real file ... As an example, one «.MOV» file is named MVI_6480Web and the original that works is named MVI_6480. Not all problem files as the Web suffixe though.
I did not pass all those 176 files one by one, so I am not sure what is the exact problem. I wonder if some of you can help me understand what is going on ?
Regards.

dalrmi wrote:
I can't believe this! I bought an upgrade to have new functionalities and what I'm having is a
limitation ?
you bought an upgrade to a separate application. i'm sure the iLife'11 manuals don't state a guarantee of compatibility with any appletv?
i'm not saying this is definitely the cause, but in the past there has usually been a requirement for an update when new iLife products were released.
Is it so unlikely to have an upgrade of ATV 1stG ?
the original appletv has been replaced and as such i doubt there will be any more software updates at all.

Some videos are not showing in Apple TV playlist after upgrade to 6.0. Can play on Macbook itunes and using airplay to Apple TV. Anybody else have this issue?

Some videos are not showing in my Apple TV playlists after upgrade to 6.0. They were there prior to upgrade and I can play on Macbook itunes and also using using airplay to Apple TV. Anybody else have this issue?

Ok, so I'll try again. Thank you for the idea of looking in Home Videos, which is where all my "lost" videos are listed.
Is there a way to get them to display under their appropriate genre in the Movie section, which is where they all were listed prior to the os6 update? It does me no good to have hundreds of movies categorized in iTunes via a genre only to have them appear in Home Videos on ATV. These are not "home movies." They are legit mp4 movies that worked great under v5.

I used to use SpeedBit Video Downloader with Mozilla Firefox, but suddenly a problem happened, I can not download with it now at all as there is an code error appears in the bar of SpeedBit like "XML Parsing Error: unclosed token Location: chrome://browse

I used to use SpeedBit Video Downloader with Mozilla Firefox, but suddenly a problem happened, I can not download with it now at all as there is an code error appears in the bar of SpeedBit like "XML Parsing Error: unclosed token Location: chrome://browser/content/browser.xul Line Number 1, column 8702:....................."
I did evrey thing, but the same problem
reinstall SpeedBit, reinstall Mozilla Firefox.
So what can I do!
== This happened ==
Every time Firefox opened
== 4 days ago

look people, i may have a solution for this. This happened to me a few times before and resolved alone, but last time it happened was when i turned off my router and back on while my comp was running and appeared when i tried opening firefox after that. so wat i did was i shutdown the computer and the router and tried turning both on again, and it resolved.
Therefore, Summary: Shutdown computer then turnoff router then turn both back on
Hope this helps anyone.

Attachments dont work in yahoo after upgrading firefox

After upgrading firefox. I can non longer attach documents to yahoo emails.
If I switch to internet explorer as browser, I have no problem with attachments.

We make changes and improvements in each and every version. Your issue may be resolved with a simple update.
You can also try clearing cache and cookies:
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you.

I'm using an iPhone 4 after upgrading to iOS 5 i'm getting an error 1635 now i'm facing problems syncing my contacts and facing many problems, i have restored my iPhone but still i'm getting the same error

i'm using an iPhone 4 after upgrading to iOS 5 i'm getting an error 1635 now i'm facing problems syncing my contacts and facing many problems, i have restored my iPhone but still i'm getting the same error

Did you check your security software settings? eliminating conflicts from third-party security software.

Is anyone having problems with the battery drains quickly and the iphone4 heats up in use and in charging after upgrading to 5.1.1?

Is anyone having problems with the battery drains quickly and the iphone4 heats up in use and in charging after upgrading to 5.1.1?

I have had the same problem but I seem to be getting somewhere to fixing it!!! My battery was going down at 20% an an hour now its 10% with constant use and 5 in standby !!! So improvement all round
First I did a restore then I drained the battery i started to charge it and when it came on I turned the phone off completely and let it charge to 100% I then left it for a couple of hours on charge at 100. I saw no improvement after 1st drain so I repeated the drain battery and charge steps again with the phone turned off when charging and have seen a very big improvement. I am going to do it again tonight and hopefully problem solved!!!!
The next issue is iMessage as that's playing up and wifi drop out
Good luck

I'm unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK

I’m unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK – and only fails when I write from iTunes. The drivers are up to date
Microsoft Windows 7 x64 Business Edition Service Pack 1 (Build 7601)
Dell Inc. Latitude E6420
iTunes 12.0.1.26
QuickTime 7.7.6
FairPlay 2.7.39
Apple Application Support 3.1
iPod Updater Library 12.0
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 8.0.5.6
Apple Mobile Device Driver 1.65.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 3.06.0.2770
Gracenote MusicID 3.06.0.2770
Gracenote Submit 3.06.0.2770
Gracenote DSP 3.06.0.2770
iTunes Serial Number 756D13C00C3583C8
Current user is not an administrator.
The current local date and time is 2015-01-13 14:47:35.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 12.0.1.26 (x64) is currently running.
iTunesHelper 12.0.1.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: SbCeCd (3.2.6.3),
UpperFilters: GEARAspiWDM (2.2.3.0),
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Drive is empty.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Audio CD in drive.
Failed Reading table of contents, error 4000.
Check the website of your computer or drive manufacturer to verify that you have the latest firmware for your CD / DVD drive.
Audio CD reading failed. Error Code: 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed failed. Error Code: 4000.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.

Hi iTunes-1,
Welcome to the Support Communities! The error message you posted indicates a possible firmware update is needed for iTunes for Windows to work with your CD drive.
iTunes for Windows: Updating the firmware on your CD or DVD drive - Apple Support
http://support.apple.com/en-us/HT201852
Having outdated firmware can cause issues using CDs and DVDs with iTunes for Windows. Firmware is a type of software stored in a chip in hardware that can sometimes be updated.Identifying drives and firmware versions
To run CD Diagnostics, follow the steps in this document.
After following the steps to run CD Diagnostics linked above, look at section three to find out more about your optical drive(s).
Here is an example of what section three might look like:
In this example there are two drives. Drive E is a Samsung DVD-ROM drive with a model designation of SD-616 that has firmware version F000. Drive F is an NEC drive with a model designation of NR-7900A that has firmware version 1.08.Updating the firmware
If the optical drive you are using came with your computer, check with the support site for your computer for a firmware update. Typically you will need to go to the support website for the computer maker and click on a "downloads" or "updates" link, and then enter your computer model designation and operating system version to see what updates are available. Then look through the available updates for a firmware update for your optical drive. Download the updater and run it. If you need assistance applying the update, contact the maker of your computer.
If the optical drive you are using came as a separate part (was not included with a computer), check the support site for the drive maker for a firmware update. Sometimes the manufacturer is not clear in the CD Diagnostics results. In that case, you may just have to search the Internet for the drive model designation. You can usually find out who made the drive by looking through the results of such a search. Once you have identified who made your drive, go to the support website for that company. Look for a "downloads" or "updates" link, and then enter your optical drive model designation. Download the updater and run it. If you need assistance applying the update, contact the maker of the optical drive.Verifying that the firmware was updated
Run CD Diagnostics again.
Examine the CD Diagnostics results. The firmware version for the drive should be the new version.
Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
Last Modified: Nov 8, 2014
Also, you mentioned that you have been successful burning a CD with the Windows OS. Make sure that you have closed all software programs that can access the CD burner so that there isn't a conflict for the drive. Sometimes chaning the burn speed from "maximum" to 8x can also help in this situation.
I hope this information helps ...
- Judy

I cannot connect after upgrading Firefox. I work in corporate environment and cannot change security settings. Why this feature was not tested before upgrading to current version?

I cannot connect to ANY web sites (for example, yahoo, google, etc.

[https://support.mozilla.org/en-US/kb/Cannot%20connect%20after%20upgrading%20Firefox Cannot connect after upgrading Firefox]
see also [https://support.mozilla.org/en-US/kb/Firewalls Firewalls]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Problems with set up disc after upgrading hard drive

I am having problems starting up my Macbook after upgrading the hard drive from 80GB to 160GB. The new hd is SATA, a WDScorpio. The pins on the end look the same, and I've had no problem with the physical install. When I go to start up the Macbook, I get a gray screen and the "flashing manila file w/a question mark" icon. I load the disc while holding down the "C" key, and all that happens is the disc gets ejected. What am I doing wrong? I also have my hd backed up w/time machine in an external hd. Any ideas?

Turns out, my problem is a malfunctioning optical drive. My Macbook couldn't read the set up disc. This is the second time in a week that I have had this Macbook into the apple store for warranty repair work. Last week, It was a defective VGcable. Each trip to the Applestore is 115 miles round trip from where I live. I tried to get Apple to give me a new computer, but no dice. I even had a district manager in Boise Idaho hang up on me. It's too bad when they know they have a product which everyone loves, and wants to use. They can set the terms. How many things must go wrong before they just replace the @#$# thing? I bought the Macbook Feb 12th, so it's not that old. I have handled it with the utmost care. Anyway, I've tasted the forbidden fruit, and will continue to use Apple products. Thanks for your help. I'll probably have a much easier time with a computer that works. (knock on wood)

I can not use ipad smart cover after upgrade ios 7.

I can not use ipad smart cover after upgrade ios 7. It makes reboot again again...if i cover up ipad with smart cover. i never had this problem before. please fix this bug!!!!

Change your iPod DNS to 8.8.8.8
That should work. Cheers

I cannot configure yahoo small business after upgrading to Mavericks Help needed

Hi Guys,
it is as simple as that:
I cannot configure yahoo small business after upgrading to Mavericks Help needed
Thanks

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Problems with your HP printer after upgrading to Windows 8.1

If you are experiencing problems with your HP printer after upgrading to Windows 8.1 please click on the below link and install the HP Print and Scan Doctor and run the utility to fix the issue.
www.hp.com/go/tools.
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

Hi.....my laserjet 1536dnf mfp was working perfectly with win 8 pro....then I installed win 8.1 pro and now the computer ,which is part of a network,can not communicate with the scanner of the printer--it prints just fine. On another computer (running win 7 ) on the same network, the scanner and all other printer functions work just fine.
I have tried installing the latest drivers from HP......scanner still not "communicating" with computer.....also temporarily disabled firewall.....please help...all the best -David G (gossat)

Hello I am using iPhone 5s but after upgrading to iOS 8.0.1 I am unable to signin my iCloud account ?

Hello
i am using iPhone 5s, but after upgrading to iOS 8.0.1 I am unable to sigin my iCloud account
whenever i try to signin it shows " verification failed" / " the password you entered in incorrect"
i changed by Apple ID PASSWORD three times and tried to signin but it shows same as above - verification failed / password is incorrect
please suggest
regards
karan deep singh

I believe that all iPhones, purchased in Egypt, from official sources, are sold as carrier locked. So, your phone was hacked by someone so you could use it in Germany. Sorry, but that's what happens to hacked iPhones.
No one here can help you, nor can/will Apple, and since none of the carriers in Egypt offer official unlocking, your choices are not good.

Problem using Yahoo Video Playlists after upgrading Firefox

Similar Messages

Maybe you are looking for