Problem view DBA in 4.0 version

hi to all
i have installed a version 4 of sql developer and i have a problem to view a win DBA
but it apper normaly in version 3

Hi Saketh,
    Firstly welcome to SDN.
     As far as my knowledge is concerned there is nothing like we can't set a radio button in 4.0.
    You can use OK code like this
case Sy-ucomm.
when 'SAVE'
message 'THIS FUNCTION IS NOT AVAILABLE' type 'S'.
when 'BACK'.
call screen 100.
when 'EXIT'
leave program..
endcase.
Hope it helps,
Regards,
Pavan.

Similar Messages

Problem viewing forms.This form is not supported with the current version of Adobe Reader.Upgrade to the latest version for full support. That does that mean exactly?

Problem viewing forms.This form is not supported with the current version of Adobe Reader.
Upgrade to the latest version for full support.
What exactly do I need to do?

That means you were probably using Adobe Acrobat to view PDF's. Acrobat is totally unnessary, you can view PDF's in Preview (Applications - Preview).
BTW PLEASE complete your profile. It's very difficult to help someone when they don't provide any information about their system. You can easily do this by clicking Your Stuff in the upper right of this page, then click Profile and fill in the pertinent information.

HT4623 Has anyone seen the problem on viewing video after upgraded to version 6.0?

I am having problem viewing video I uploaded on facebook (not from youtube), also on Video D/L Pro that used to work with latest ios5. Has anybody experienced the seame problem I have? thanks.

I would recommend using the SEARCH function of the forums and locating the many others posts that have already discussed this issue.

I have received the alert that my version of Safari no longer supports Youtube viewing. I am running version 5.1.10 on OS 10.6.8. Is there an update or a newer Safari version that is compatible with my OS?

I have received the alert that my version of Safari no longer supports Youtube viewing. I am running version 5.1.10 on OS 10.6.8. Is there an update or a newer Safari version that is compatible with my OS?

No, not without upgrading to a higher version of the Mac OS. However, the easiest thing to do is get another browser for use with sites that don't like older versions of Saari. I always have a secondary browser on any computer, Mac or PC. For our Macs, I install FireFiox alongside Safari when setting up a new computer.
As FireFox is updated sometimes weekly, YouTube should not have a problem with it.
https://www.mozilla.org/en-US/firefox/all/

Problem viewing some webpages

Hey
Looking for some help with my macbook. I have been having problems viewing videos on youtube and i'm unsure of the problem. When i try to view a video it comes up with this message.
"Hello, you either have JavaScript turned off or an old version of Adobe's Flash Player. Get the latest Flash player."
Also youtube doesn't look right. It looks like it is all in some kind of basic format with no graphics, ads, pictures etc. (Im not particularly computer savvy)
I've checked my all the settings are correct in preferences, i've updated flash player and made sure all other software is up to date and still no joy!
I had no important data on my macbook so i wiped it and reinstalled the OS and updated everything again, it still hasn't sorted the problem.
Im unsure what to do next, any ideas would be much appreciated.
PS i recently had someone's external hard drive plugged in to it, could i have got some virus from this??

Thanks for the swift reply greg.
I assumed it probably was not a virus but i thought i'd check anyway. Thats pretty much the reason i bought a mac.
I checked the preferences and JavaScript was already enabled and all other boxes checked also. It only seems to be youtube thats the problem so far although i have not been on many other websites since.
My internet connection is not particularly fast, i am using my college wifi network and it can often be very slow. I usually need to let videos load for a couple of minutes before i can watch.
I have had the Macbook for about a week and have been using it regularly. The problem only started yesterday. I also carried out all my apple updates yesterday, i'm not sure if this is what has led to the problem??

I am having problems viewing CR2 files

Hi,
I using windows xp service pack3. I used before about 2 years and I never had problems, but now when I uninstall adobe photoshop cs5 because I could not see CR2 files in adobe bridge I tried install again about 3 times and unsuccessful, could you help me please.
Kind Regards
Vygis
Date: Tue, 12 Jun 2012 16:55:49 -0600
From: [email protected]
To: [email address removed by host]
Subject: I am having problems viewing CR2 files Installing Adobe Photoshop cs5
Re: Installing Adobe Photoshop cs5 created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Were you experiencing this message prior to removing Photoshop CS5 Extended? If not what prompted you to reinstall? Finally what version of Windows are you using?
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Re: Installing Adobe Photoshop cs5
To unsubscribe from this thread, please visit the message page at Re: Installing Adobe Photoshop cs5. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Are you receiving an error when installing or are you unable to view your CR2 files once Photoshop is installed?

Problem viewing Apple website

Just wondering if anyone else is having a problem viewing
http://www.apple.com ?
I suspect I know what is going on, but would like some
verification that the page is trying to load a quicktime
clip in H.264.
Regards,
genec

I am using Windows XP Home SP2 and QuickTime 7.1.
When I try to go to http://www.apple.com
Internet Explorer 6 SP 1 crashes. So does Firefox.
The problem is, I suspect, that my computer does not meet
the minimum requirements for H.264.
I do note that the requirements for Quicktime 7 are:
Windows XP (got that)
a pentium computer (AMD K6-2 500)
and 128MB ram (have 384MB)
I have downloaded the stand alone install for Quicktime 7.1
I have the latest version of direct X and have checked for
video driver updates (none available.
So basically, I have done everything on the Quicktime
support site and it will not work.
I tried to view the WWDC, and got a Microsoft Visual C++
Runtime Library error....Bufer Overrun Detected.
I am working that issue with Microsoft.
Any further light you can shed on this would be most appreciated.
genec

Problem view TIFF multipage images with ECL Viewer 5.1.3

Dear All,
using the SAPGUI 710 and CV04N, I cannot view the same TIFF multipage image twice in ECL Viewer, the second time, the first time every thing is ok, but the second time the SAPGUI display the error : "File C:Docume1dupondLOCALS1TempZEP_0457895 cannot be created"
To view again the TIFF mulitpage image, I need to kill the sapLogon.exe process and relaunch it again.
It seams the TIFF image file is locked by the the saplogon.exe process the first time and on the second time, SAP cannot rewrite the temporay TIFF image file.
Notes:
- I use CV04N or CV03N to view the documents.
- This problem doesn't happends with non multipage TIFF image.
- Tested on more than 20 computers.
- Computers are with Windows XP SP2 + SAP GUI 7.10 Compilation 2 + SP9 + SP12 + - ECL Viewer 5.1.3 (integrated with Comp 2)
How can I fix this problem ?
Thank you for your help
I think this is not the correct forum to post this king of problem, i create the same post on
Expert Forums » Application Server » SAP GUI » [Problem view TIFF multipage images with ECL Viewer 5.1.3|;
Edited by: Patrick Zufferey on May 5, 2009 11:41 PM

Can you upgrade the ECL viewer to version 6.0 and check whether the same problem still exists? you can download from service.sap.com

Problems viewing CNN videos

Is it only me? With both Firefox and Safari, whenever I view a video on the CNN.com website, it is terrible. It just shutters and the audio is shaky. Even if I wait for the whole video to download before pressing play, I get the same problem. This has been happening for a long time, with many different versions of Firefox, starting in 2.x and still in 3.x. I never have any problems viewing YouTube video or any QuickTime videos, it is ONLY on the CNN.com website. I have contacted them several times (contact us) and complained, but I have never received a reply.
I just want to make sure it isn't my machine. I have a pretty good system with plenty of RAM, etc.
Thanks.

Hello,
I've never had an problems viewing CNN video/audio on Safari 3.1.2 (Tiger 10.4.11).
In Safari, from the Menu Bar, select Help/Installed Plug-Ins and make sure you have the following plugin: Shockwave Flash 9.0 r151 — from file “Flash Player.plugin”. You can do a quick search of plugins by pressing Command + F in that plug in window and type in Flash in the search field. If it's there, it will be highlighed.
If not, go here and download the Safari Flash plugin: http://www.adobe.com/shockwave/download/alternates/
If you already have the Flash plugin, perhaps you need to do some maintenance on your Mac? If you don't have a disk utility to clean out caches, run routine maintenance and cleaning scripts... get Onyx here: http://www.titanium.free.fr/pgs/english.html It's free, easy to download and install and use.
Also, check your available drive space as BDAqua suggested. Right or control click your MacintoshHD icon, then click: Get Info In the Get Info click the black arrow next to General so it faces down. You will see: Capacity and Available. Make sure your Mac has a minimum of 10% free disk space, 15% is better. Not enough disk space and video/audio, applications.. will crash/free... in general, erratic behavior.
Carolyn :- )
Carolyn

Problems viewing form

Hi,
I created a form using LiveCycle and sometimes I have problems viewing the data. The text fields are blank and if I click my mouse in the field the text shows up then if I click out of the field it goes away. If I click into the field and type a space then the text remains visible. Sometimes the radio buttons do not display as I created them. It displays a circle inside the box instead of just the box.
These problems only happen on some of the returned forms. Also, some people say they cannot save the data even though they are saving the form to thier hard drive first. At least that is what I tell them to do.
Thanks for any help on this!

OK,
Last shot at this:
AcroForm with document level javascript to populate a field with viewer type, version and variation. For example, this populates as "This AcroForm is open in Exchange-Pro, version 9.302. The variation is Full" in Acrobat Pro 9.
Update button that increases a counter by 1 and repopulates the viewer type, version and variation field.
This works in Acrobat and Reader. For example Reader comes up with "This AcroForm is open in Reader, version 9.301. The variation is Reader", which is correct.
However in Preview it is evident that document level script do not work, as the viewer type, version and variation do not update.
Also Javascript in a mouseUp event does not work, as the update button does not advance the counter nor update the viewer type, version or variation.
Lastly simple calculation script (javascript) does not work, see the quantity/price calculation.
This form is 100% AcroForm and even simple functionality does not work in Preview. I wouldn't trust Preview as far as I could throw it!!
Sample here: https://acrobat.com/#d=JAg6ptZtGEcqpxHNJ-XMzg
Niall

HELP! Problem viewing Youtube videos.

Hello,
I am having problems viewing Youtube videos. Everything was great until the other day. I have not changed anything on my computer to create this problem.
Diagnosis:
when viewing videos straight from youtube.com with Safari, it loads and starts to play the video & audio. after the first second the visual video disappears and the audio keeps playing. I can scroll throughout the video, but no picture.
I do not understand, I have updated everything and still same outcome. It was working the other day fine and then boom, no video. WHAT SHOULD I DO?
Thank you for you help,
B

Sounds like a problem with Flash. I'd recommend visiting Adobe's web site and updating to the most current version for OS X.
Roger

Problems viewing videos and trailers after the lastest Flash Player update

I have Windows 7 - 64 bit, I use Firefox 11 (latest version) and Chrome (latest version); however, since I have installed the latest Flash Player update, I cannot view any trailers or some videos. Youtube works fine, but other sites dont (I just get a green screen). Please can someone assist me? I have tried the "Help" section for Flash Player and it hasn't been too helpful.
Thanks in advance!
Ok, I found the problem, my hardware acceleration was set to enabled, once I disabled it, I had no problems viewing any of my sights that used Flash.
Message was edited by: BanzaiOrion

You might want to update your driver, particularly if you have an NVidia GPU. Here's a post where we describe this process and ask for additional details so we can resolve this for others.
Video investigation with Flash Player 11.2.202.228

Problems viewing Palladia HD channel

Very recently, I am having problems viewing the Palladia HD channel. I can view the channel for a few seconds, but then I get a pop up on the screen that my set top box can view the channel and I need to upgrade my STB. (I can view other HD channels just fine). I follow the on-screen instructions for upgrading the STB and it tells me that my STB is up-to-date. Anyone else run into this problem?

Woburn Mass Fios customer.
I had received the same screen message "setup box can not view the channel,need to upgrade the sdp box. I clicked the on screen ok and response was my box was up to date.
I called Verizon tech support today and talked with an engineer, he was unaware of the issue or error message. I told him what I had read here (model numbers QIP6200, mpeg4 format ,etc) but nothing registed with him. I calmly described the issue, the screen notifications and the response, he said he can only help if I have a technical problem and any box upgrades are handled by billing. transfered to billing, explained it, again, again never heard of it but they did find a tech who understood the problem.
Once I was connected with this tech (Jerry) , he understood and said a new box is on its way, the old 6100 series could not handle the new format and the new box would be a 7100 version 2. He said that the local provider is switching the channel format to a better stream method so that bandwith method would be reduced with no quality concerns over HD picture. . He also said that the conversion of most channels will occur within the next year or two and that there are other channels like Palladia that would require the new box. I've only run into this error with Palladia on my system at this time.
I asked him why some people I talked to earlier did not know anything about this issue and he said they must have been new and the box limitation was known for at least six months.
Suggestions to Verizon: Perhaps an internal tech alert may or should be in the works.
Also fix the on screen automated help menu's as if it worked, I would have had a box on its way a week ago without spending an hour of my life talking to customer service today. It wasted their and my time.
Note to billing person, your system must be slow but the minutes of silence while you checked out my account had me wondering if I was on hold or mute. Introduce either background music or some verbal communications letting me know each step of the way would be nice.
Also no offers of free movies or other special deals. I'm hurt as you guys usually rock with the offers.

Problems with reverting to an earlier version

The update with Flash Player was causing problems, so I uninstalled Flash Player 11 and then installed Flash Player 10. But I now have Flash Player 10 Plugin and FlashPlayer 11 Active X on my computer. I am not sure how this happened, but is this OK or is this going to cause me more problems?
Have now just checked again in Control and it also says I now have Adobe 11 plug in. So I guess I am back to where I started.
I saw my original question but could not find out how to attach this question to it. Sorry.
[email address removed]

Dear Pat,
Thank you. I have received the exact same reply from Amreso.
I thank you both for your replies. If the problem occurs again, I shall follow your advice.
I just need to pluck up the courage. I get so nervous with the computer when it plays up.
Regards
Anthony
Date: Fri, 19 Apr 2013 02:11:29 -0700
From: [email protected]
To: [email protected]
Subject: Problems with reverting to an earlier version
    Re: Problems with reverting to an earlier version
    created by Pat Willener in Installing Flash Player - View the full discussion
This is a public forum; please do not post your email address (by sending the entire forum notification message with all its headers back to the forum).
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5250122#5250122
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5250122#5250122
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5250122#5250122. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Installing Flash Player by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Recently having a problem viewing youtube clips embedded on to ppt

As a lecturer, I often insert youtube clips onto my ppt. Until about a month ago, I never had problems viewing the embedded youtube clips on my powerpoint files. Now, after having succesfully embedded the video clips, I keep getting this message as shown in the screen shot below. I have installed the newest version of flash player numerous times (my OS is Window Vista and the Flash Player version I have is 11.7.700.169, AND I mostly use Firefox but have the same problem on IE), turned off and back on several times, and uninstalled and reinstalled the Flasy Player many times, but nothing would work. I have tried embedding other youtube images as well as tried doing the same thing on other computers and I run into the same problem. I KNOW how to embed youtube videos into ppt files as I had done it a lot of times with no problem. I don't assume I am the only one experiencing this problem. Please help!
PS: Sorry, didn't know the screenshot doesn't work here. So the message I get is "To play the selected item, you must install a later version of the Adobe Flash Player. To download the Adobe Flash Player, go to the Adobe website."

See similar topics
http://forums.adobe.com/thread/1169640
http://forums.adobe.com/thread/1175422
P.S. to insert a screenshot use the camera icon in the forum editor.

Problem view DBA in 4.0 version

Similar Messages

Maybe you are looking for