Problem viewing clips in monitor panel

If I click on a clip from the sceneline, the clip will not play in the monitir panel. You can hear the sound though.
My computer is a Toshiba laptop - Satellite M645 with 6 GB of ram and i5 processor. OS is Windows 7 Professional, service pack 1.

Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
Report back with the codec details of your file, use the programs below
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
User Guide PDF http://help.adobe.com/en_US/premiereelements/using/index.html
Right click the PDF link in the upper right corner and select to save to your hard drive
-the page also has links to help pages for previous versions
Read Steve's Basic Training Tutorials http://forums.adobe.com/thread/537685?tstart=0

Similar Messages

Help - can't view clips in monitor

I'm running iMovie4 and suddenly can't see any of my clips in the monitor. Just get a black screen. consequently can't edit or play them at all. What's happened?

Hi l
Most common origin to this is:
• Running low on free space on the Start-up hard disk
less 5Gb - nothing should work OK
5 - 10Gb might work slow and instable
25Gb free space - my goal after importing material to my movie
else
There are several different origins to this. I would.
• delete the iMovie pref file
• run: Repair permissions (Apple Disk Util tool)
• start from another hard disk or CD/DVD then
run: Repair hard disk (Apple Disk Util tool)
• start a new account and log into this and re-try
• remove third party plug-ins if any new is added
• remove resently added new fonts.
Try one at a time and see if it works.
Q:
• How much free space is there on Your int hard disk
• Is there any ext devices connected
• Mac OS X.4.?, iMovie v. 6.0.3 ? and QuickTime version ?
• Did You put in any third party plug-ins to iMovie or into QT ?
• is you Mac as "factory delivered"?
• or did you install a new iLife version?
• or did you de-install any files/apps, e.g. using "Multilingual" etc. pp
(from Karsten)
• other programs that interferes like < Unsanity APE >
< FileVault > etc.
• I finally copied the iMovie folder in the other user's library to my library
and I dont know why, but it fixed it! (skcomp123)
1. Sequre that there are at least 20Gb free space on the internal hard disk.
2. Try not using any external hard disk
3. Versions I would use: Mac OS X.4.? + iMovie 5.0.2 + QT 7.0.4 (I think)
QT v 7.1.6 I guess can give problems - MY personal opinion
4. Delete iMovie pref file
iMovie
-->/Users/YourName**/Library/Preferences/com.apple.iMovie.plist
and
-->/Users/YourName**/Library/Preferences/com.apple.iMovie3.plist
5. Run: Repair permissions (Apple Disk Util tool)
6. Start from another hard disk or CD/DVD then run: Repair hard disk (Apple Disk Util tool)
7. Start a new account and log into this and re-try.
Yours Bengt W

I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is not installed. When it opens there is a red screen in the monitor panel with Korean writing which als

I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is not installed. When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video. I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video. Do you have any suggestions? I researched codec, but do not understand them at all.

gloucester
In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
that appears at the top of this forum.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
ATR

Why would my video clips be running too fast when played on the monitor panel?

I posted my problem earlier today, but re-reading it maybe I didn't explain myself well enough.
My main question is: "why would my video clips be running too fast when played on the monitor panel ?". This is occuring after I have selected my media from the Tasks Panel and placed them in correct order in the Timeline/Sceneline. I knew something was wrong when I could see that the clips were not indicating their right length when viewed in the (expanded) timeline. They were compressed into just a few seconds, whereas the clips should have been at least 5 minutes. I ran the clips in the monitor and sure enough they ran too fast, with a lot of jerking movements.
The 3 video clips I am trying to make into a HD PAL video were taken with my Nokia N8 mobile video camera. These are in mp4 format. Can this present a problem ? Note that when I play these individual HD clips on my computer in (Windows Media Player) they run fine.
After I placed the clips in my Project Panel (or before in the Organize Workspace), I have perforned no change or manipulation of the clips. They are in their original state.
Just too confirm that the clips did seem to be compressed, I burnt a DVD, the resultant video ran in a matter of seconds.
Help would be greatly appreciated.

Yes, that is what the problem was.
Although the video camera on my Nokia N8, mobile was capturing at 25fps,
for some reason once transfered over to PrE9 (via file transfer), the clip was interpreted as 500fps. Once in Interpret Footage I was able to change the fps to 25.
Thanks for the help.

Viewer on 2nd Monitor Problem

I just upgraded FCPX to 10.06 and when I show "viewer on 2nd monitor" the image is all screwed up and distorted, almost like it lost sync. This has never happened before. Has anyone had this happen after upgrading FCPx??

I checked the connections. If I output the event viewer to the second monitor then its all correct. I've found a work around but it's very strange. I had the second monitor on top of the main monitor in the display preferences for monitor arrangement. When I move the 2nd monitor to the right of the main monitor in the preferences and quit FCPX and re-open FCPX, it then works fine. I never had this issue before I upgraded to the next version 10.06. Try putting your 2nd monitor on top of the main monitor (in the display preferences) and then output the Viewer to the 2nd monitor. Curious if you get the same problem.

Recently having a problem viewing youtube clips embedded on to ppt

As a lecturer, I often insert youtube clips onto my ppt. Until about a month ago, I never had problems viewing the embedded youtube clips on my powerpoint files. Now, after having succesfully embedded the video clips, I keep getting this message as shown in the screen shot below. I have installed the newest version of flash player numerous times (my OS is Window Vista and the Flash Player version I have is 11.7.700.169, AND I mostly use Firefox but have the same problem on IE), turned off and back on several times, and uninstalled and reinstalled the Flasy Player many times, but nothing would work. I have tried embedding other youtube images as well as tried doing the same thing on other computers and I run into the same problem. I KNOW how to embed youtube videos into ppt files as I had done it a lot of times with no problem. I don't assume I am the only one experiencing this problem. Please help!
PS: Sorry, didn't know the screenshot doesn't work here. So the message I get is "To play the selected item, you must install a later version of the Adobe Flash Player. To download the Adobe Flash Player, go to the Adobe website."

See similar topics
http://forums.adobe.com/thread/1169640
http://forums.adobe.com/thread/1175422
P.S. to insert a screenshot use the camera icon in the forum editor.

No Preview in the Monitor panel

Hello all,
when I start playing the images, there is no preview available in the Monitor panel (white screen). Only stopped sequenzes were shown and the sound is playing. This problem occurs independently from the used files. When starting Pre there is a failure shown:Problems with the Intel Graphics.But the driver is updated to the latest version. Furthermore it is not possible to change the setting from the Graphic Card as described in the Pre Help.
Select Edit > Preferences > General.
Deselect Enable GPU Playback and in the Playback Preferences dialog, click OK to confirm.
This menu is not available!
Thanks in advance for your help and best regards,

What model of camcorder is your video coming from and what format it is?
When you started your project, which project settings did you select? If you selected the right project settings for your video, you will NOT see red lines above your clips when you add them to your timeline. Is this the case in your project?
Have you ensured you have the latest version of Quicktime, per the program's requirements? Have you gone to the nVidia or ATI site and ensured you have the latest drivers for your graphics card?

Capture monitor panel issue

Everything worked fine in capture mode from a camera.When i change the 4850 ati with a new GTX 470 n vidia,the monitor panel in capture mode, looks like the black level has increased,or something like that.. Actually there is no basic problem the clip is captured correct.Does anyone knows about it?The same issue happens also in cs4.ASUS P6T, I7,12GRAM, VISTA 64 NVIDIA DRIVERS 260.99.

Thanks a lot for your reply.I did but nothing change.During capture if i click capture settings i can see the real black in monitor.Why the source and the program monitors are correct and this happens only in capture mode?

Video and audio sync when viewing clips online

When viewing clips, like on youtube, the graphics start playing, however there is no sound, only after a few seconds the graphics freeze and the sound that was missing starts playing and the graphics resume when they're in sync again.
Also when I pause a video and click play the clip will not resume and I have to click the "time bar" and then it will play.
My 13 MB Pro starts furiously blowing the cooling fan and consuming battery life when viewing clips on most video sites.
How can I fix these things?
This already happened before upgrading to Lion, btw.

Are you capturing this thru the LS? and what is the format you are digitizing? DV? or uncompressed? Would be best I'd think if you don't capture audio and video as separate files too. That leads to problems especially with DV captures.
How are you monitoring the audio and video? all from computer or? You could be in sync and not know it if you are using computer speakers for monitoring audio when watching video externally for example.
If you monitor both from the computer and it is in sync, but not when you record to video, I'd suggest that you export a self contained movie of this material and import that for the print to the beta... I'll wager that will keep your sync. If this doesn't help, might want to post this in the AJA KONA forum at http://www.creativecow.net Might be something to do with your LS, not sure but do have the latest drivers installed on it...
Jerry

Viewer and External Monitor doesn't playback at same time

When watching clips in the viewer window, they playback fine. But on my external monitor, it only shows the first frame from when it's played. when I stop playback, the external monitor then shows the last frame the Viewer window is stopped on. How can I fix it so that the viewer and external monitor playback the clip at the same time?
At the moment we're digitizing footage with the Offline RT Photo JPEG codec set to 75% quality.
A few days ago we were digitizing footage at 35% quality and that footage plays back fine. We moved to 75% quality at the editor's request. A few days ago we had created a few sample 75% quality tests for the editor to view. I loaded those clips into Final Cut right now and they playback fine as well. So it's all of a sudden just these new clips created yesterday :S.
Message was edited by: Phillip Roh

Yes.
Forgot to mention that the timeline plays all the footage back properly on both the canvas window and the external monitor. Sorry for not mentioning that sooner.
More discoveries! The playback 'freeze' only happens if I open a clip from the browser into the viewer. If I open a clip from the timeline into the viewer, it plays-back fine!
Message was edited by: Phillip Roh

Problem viewing Apple website

Just wondering if anyone else is having a problem viewing
http://www.apple.com ?
I suspect I know what is going on, but would like some
verification that the page is trying to load a quicktime
clip in H.264.
Regards,
genec

I am using Windows XP Home SP2 and QuickTime 7.1.
When I try to go to http://www.apple.com
Internet Explorer 6 SP 1 crashes. So does Firefox.
The problem is, I suspect, that my computer does not meet
the minimum requirements for H.264.
I do note that the requirements for Quicktime 7 are:
Windows XP (got that)
a pentium computer (AMD K6-2 500)
and 128MB ram (have 384MB)
I have downloaded the stand alone install for Quicktime 7.1
I have the latest version of direct X and have checked for
video driver updates (none available.
So basically, I have done everything on the Quicktime
support site and it will not work.
I tried to view the WWDC, and got a Microsoft Visual C++
Runtime Library error....Bufer Overrun Detected.
I am working that issue with Microsoft.
Any further light you can shed on this would be most appreciated.
genec

Problems using the Program Monitor

Dear Premiere users,
I recently bought Adobe Premiere CS3 and i'm having problems using the Program Monitor.
I cant see anything off screen. It just wont show anything if its outside the boundaries of the screen. I can adjust the zoom level but that wont change anything even if i set it to full screen.
Another problem I'm having is that it wont show motion paths or clip handles. Even if I make a motion path in the Effects Control window it wont show the path in the Program Monitor.
I really appreciate any advice on this because it drives me crazy. I already tried installing it again but that wont solve the problem.
Thanks in advance.
Greetings,
Peter

First of all I hope you are being sarcastic Jim. Sorry for being not that clear but I'm not stupid :).
Craig Howard is right. I thought that the Program Monitor was similarly to AEFX. But I suppose I was wrong on this one? So you cant get something to display outside the image area? If I place a clip outside the project dimension it just disappears in the Program Monitor.
And about the motion paths. I thought I read in the Premiere help files that they do show up in the Program Monitor. The topic says: "Adjust position, scale, and rotation" or "Animate motion in the Program Monitor ". There are pictures over there that show clip handles and motion paths in the Program Monitor. Clicking the effect wont do anything for me. Its like my video driver cant get them to show or something.
Edit: I found a tutorial here:
http://digitalproducer.digitalmedianet.com/articles/viewarticle.jsp?id=26660&afterinter=tr ue
They are dragging frames off screen and are using the handles and borders around the frame to adjust them. So I guess it should be possible, but how?
Thanks for the help.

View two program monitors to match colors (CS6)

Hi,
I'm trying to color match two shots and I'd like to be able to view them side by side while I adjust the colors in one of the shots. It seems like a good way to do this would be to view two program monitors side by side - but is that possible? I can't see that option anywhere.
Using the source monitor for comparison doesn't make sense to me as I've already color corrected the reference shot and the source monitor shows the original footage (ie. the wrong colors). I could of course try to match the shots based on the source footage of the reference shot and then apply a second color correction but that seems a bit unnecessary to me.
Or - I remember that in FCP7 there is an option to use split screen while color correcting two view two shots simulatenously side by side in the same screen/monitor. Is there anything like that hidden in PPro?
I'm also happy for any other suggestions on how to do this.
Thanks!

Open the graded clip in a Reference Monitor.
Un gang Ref Monitor from the Program Monitor and then start work on the other clip.
eg.
or..maybe
Quick and dirty way...
Frame Grab graded clip. Open it in the Source Monitor as reference. Flick back and forth.
BTW: CC Speedgrade has excellent multi monitor support (2 or 3 playheads) for this as well as a fairly good match clip facility (FWIW)

Problems viewing 1080i/60 .mov files

I am having problems viewing 1080i/60 .mov files. When I open the file, it shows all white. I have exported some HD footage shot on my HVX 200. I am using FCP 5.0.4. I also have created some animated clips from Vue 6 Infinite and it does the same thing.
I have Quicktime Pro 7.1.5
does anyone have any suggestions on what to do, or what I need to download in order to have this work?
Thanks

Export from Final Cut using the Apple Intermediate codec to view in QuickTime.
You've probably exported using an HDV codec only used by Final Cut.

.mts file video won't play in Elements 10 Monitor Panel

Hi All
I am having trouble with .mts files. I have Premier Elements 10 on Win7 pc, and I have just, for the first time, opened .mts video files which were taken on my Lumix FZ150. When I drag the scenes onto the timeline then try to preview them I can hear the audio but the video in the Monitor Panel doesn't move, it doesn't play.
Is there something I am doing wrong?

jgjgjfjf
What computer operating system is your Premiere Elements 10 running on? And, does your computer use a NVIDIA GeForce video card/graphics card?
IMPORTANT. Please read the Announcement at the top of this forum regarding the Premiere Elements 10 NVIDIA GeForce issue. That Announcement describes the problem and gives detailed information on how to deal with the situation.
Do you have problems getting a video display in the Edit area monitor for still and videos from other sources?
Also of importance in directing the troubleshooting are the properties of the Panasonic Lumix FZ150 video file that you are importing and the project preset that you are selecting to match the properties of that video. From what I have read of your camera, you could have MPEG-4, AVCHD, or MotionJPEG video compression. But, with that .mts file extension, that would suggest that your camera is set to record AVCHD. Is that correct? Are you sure of the file extension and video compression for the file?
The answers to all of the above will point us to the solution to your issue.
We will be watching for your results.
Thank you.
ATR

Problem viewing clips in monitor panel

Similar Messages

Maybe you are looking for