Problem viewing data

Hello,
Still trying to get things woeking, but now I got stuck
again.
I can't get view my data, each time I get this error:
"Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
[Microsoft][ODBC Microsoft Access Driver] The Microsoft Jet
database engine cannot open the file '(unknown)'. It is already
opened exclusively by another user, or you need permission to view
its data."
I tried everything sofar, I have set-up the tutorial from
Townsend café, and that is working fine.
But as soon as I use my own database (with connection and
recordset) I got the error again.
Funny thing is, when I restore the situation back to the
files, connection and recordset from the Tutorial (café
Townsend) I get the same error. Only when I shut down dreamweaver,
and re-open it, the life data view works.
What can I do?
I assume I have to adjust authorizartion in the IIS, but how?
Last thing I can and will try, is to import my tables into
the sample database, but that shouldn't be the way.
How can help me out?
Thanks!
Eric

In Windows explorer, go to the Security tab and find the
IUSR_computer name
user and add that to your allowed list. Give that user read,
execute and
write permissions.
Nancy Gill
Adobe Community Expert
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: DMX 2004: The Complete Reference, DMX 2004:
A Beginner''s
Guide, Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"Eric72" <[email protected]> wrote in
message
news:eng67j$7v7$[email protected]..
> Hello,
>
> Still trying to get things woeking, but now I got stuck
again.
> I can't get view my data, each time I get this error:
>
> "Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
[Microsoft][ODBC
> Microsoft Access Driver] The Microsoft Jet database
engine cannot open the
> file
> '(unknown)'. It is already opened exclusively by another
user, or you need
> permission to view its data."
>
> I tried everything sofar, I have set-up the tutorial
from Townsend café,
> and
> that is working fine.
> But as soon as I use my own database (with connection
and recordset) I got
> the
> error again.
> Funny thing is, when I restore the situation back to the
files, connection
> and
> recordset from the Tutorial (café Townsend) I get
the same error. Only
> when I
> shut down dreamweaver, and re-open it, the life data
view works.
>
> What can I do?
> I assume I have to adjust authorizartion in the IIS, but
how?
>
> Last thing I can and will try, is to import my tables
into the sample
> database, but that shouldn't be the way.
>
> How can help me out?
>
> Thanks!
>
> Eric
>
>

Similar Messages

Problem viewing data through autogenerated java class

I have a AQ created with a custom data types as below.
User type definition
type clr_msg_type as object(
firm_id number,
b_com_id number,
cl_com_id number,
action varchar2(15),
action_id varchar2(15),
user_id varchar2(30),
clr_status varchar2(20),
p_id number,
message_type varchar2(50) );
I am having issues with viewing the above object which is the payload on the AQ.
I see "???" for all the variables except b_com_id,cl_com_id and firm_id. rest of the variable I see as "???" when I try to run the debugger.
To map the above object I used jpublisher to auto generate the java class which has getters and setters for the above variables.
I used below command to generate the class.
jpub -user=username/password -sql=CAT.CLEARING_MSG_TYPE -case=mixed -usertypes=jdbc -methods=false -url=jdbc:oracle:thin:@192.134.124.210:1450:dev5
I have below files in my classpath.
C:\oracle-jpublisher\sqlj\lib\translator.jar;C:\oracle-jpublisher\sqlj\lib\runtime12.jar;C:\oracle-jpublisher\sqlj\lib\
ojdbc14.jar;C:\oracle\product\10.2.0\client_1\jlib\orai18n.jar;
I can view data in the below variables:
firm_id number,
b_com_id number,
cl_com_id number,
But I see "???" in the below variables:
action varchar2(15),
action_id varchar2(15),
user_id varchar2(30),
clr_status varchar2(20),
p_id number,
message_type varchar2(50) );
Any idea why this is happening?

if the data is there ( and I can't see why it's not) then the issue is actually printing it on the paper and the issue may be with the font not working with this printer if the static text always prints ( and is in BOLD) then lets just try that and if it works and you can verify that is the issue then you will know where to solve the issue.
as someone** else has posted elsewhere debugging is a case of divide and conquer. (**Michael Meyers-Jouan)
Edited by: AlunJD on Aug 17, 2011 1:54 PM

Problem viewing data in Performance monitroing in RWB

hi Forum,
In RWB in "Performance Monitoring", When i try to display "Overview Aggregated/Overview individually/Detailed Data Aggregated/Detailed Data individually", i am unable to view data before 07-june-2010 (for information today's date is 22 June 2010).
I have tried to view data of a month/year etc. but cannot see data dated before 07-June-2010. But earlier i could see data of any date range.
This is a problematic situation as it is a productive system,
Please help,
Please note I am using XI 3.0 with SPS 23.
regards
Edited by: rana brata de on Jun 22, 2010 7:43 AM

Yes, we ran deletion jobs, but deleted messages that were dated 2008,
also, the data i m talking about is visible in SXMB_MONI, but not in RWB->performance monitoring, as i said
please suggest
Edited by: rana brata de on Jun 23, 2010 8:44 AM

Problem viewing data after import TDMS file

Environment SignalExpress 3.0. Windows XP.
I have a number of logs created and saved in a SignalExpress 3.0 project. I'm trying to import a single log into a new project and view the data in a data view window.
So I do:
Open SignalExpress
File->Import->Logged Signal from SignalExpress TDMS files
Navigate to the log folder named - "25062009_135820_-_Nano_Carbon_Pyrograf_T1"
Double click the tdms file named - "Voltage.tdms"
I see the following tree structure in the Logs pane :
Logs
    - 25/06/2009 13:58:20
        - Nano Carbon Pyrograf T1
            - Voltage - Dev3_ai0.
If I then try to drag Voltage - Dev3_ai0 onto a data view it doesn't work.
I've inspected the original project which I used to create the log tried to import above. Comparing the tree structure it looks:
Logs
    - 25/06/2009 13:58:20 - Nano Carbon Pyrograf T1
        - Voltage
            - Dev3_ai0
In this project I can drag Dev3_ai0 onto a data view with no problem.
Notice the difference in tree structure in the Logs pane? I'm pretty sure SignalExpress is parsing the log wrongly when it imports it!
Mike

Hi Mike
I know that we have communicated over email but I just wanted to respond here so others can see the workaround.
I have investigated the issue and have been able to reproduce the issue, even in Signal Express 2009. The problem is caused by the name you specify for the log when you begin recording. If the character "-" is present at any point in the name of the log, Signal Express does not import the tdms file correctly. This is not an issue with the tdms file, as it opens fine with LabVIEW, but must be an issue with Signal Express. I have reported this as bug under reference #182846. For now, you should not use the "-" character in the name of your log.
Regards
Rich
NI | UK

Problem viewing data in Healthvault

I can upload my BP readings from my Homedics monitor but can't see them using the Healthvault view. Tells me to upload a reading first. Can anyone advise on what's wrong?

Hello,
Can you please create a support ticket by going here:
https://support2.microsoft.com/oas/default.aspx?&gprid=15467&&st=1&wfxredirect=1&sd=gn . We need to get some information from you to help assist in this investigation.
Thanks
Tomas
MS HealthVault Support

Problem viewing data in forms completed on Macs

I have forms loaded on our website for clients to download, complete and email back to me. They work fine until filled out on a Mac. For some reason, the fields are all blank but when you click in them, the data the client has input is visible. Clients tell us they can input and save the form which looks fine on their Mac but when they send it the fields appear to be empty (I am opening the forms on a pc) This doesn't happen with pc's. The forms were created in Acrobat Pro. Can anyone please suggest what I might be missing here?

Here is your solution. Copy the Javascript code below from // to //   Then open Windows Notepad program and past the script in there. After you paste it go to "save as" then look for the Javascript folder for Adobe Pro X ( or XI)
It will probably located in some place like C:\Program Files\Adobe\Acrobat 10.0\Acrobat\Javascripts.
And then name the file whatever (for example FormFill.JS) - the .js is important.    Your done. Then open Adobe Pro and click on the FILE button inr the up right corrner. On the gray drop down menu and new words FIX FILE APPEARANCE should be on the bottom of that drop down.   If you get a Mac submission, click these words (button) and it will fill in the info. (I don't lay claim to the solution or coding) But it work in Adobe Pro X & XI and have done it for the whole staff in my department
// Add a menu item to the end of the File menu
app.addMenuItem({
    cName: "AS_correctFieldAppearances",
    cUser: "Fix Field Appearances",
    cParent: "File",
    cExec: "COM_ACROSCRIPT.correctFieldAppearances(this);",
    cEnable: "event.rc = (app.doc && numFields && (typeof xfa === \"undefined\"));"
// Create namespace to prevent potential name conflicts
var COM_ACROSCRIPT = {};
// This function does the work
COM_ACROSCRIPT.correctFieldAppearances = function (doc) {
    var i, j,
    f_name, f, fp, nWidgets, fw, cc,
    c1 = color.blue, c2 = color.yellow; // These can be any color, as long as they are different
    // Suspend redrawing field appearances until the end of this script
    doc.delay = true;
    // Loop through all of the fields in the document
    for (i = 0; i < doc.numFields; i += 1) {
        // Get the name of the current field
        f_name = doc.getNthFieldName(i);
        // Get a reference to the current field
        f = doc.getField(f_name);
        switch (f.type) {
        case "button"    : break; // No need to process buttons
        case "signature" : break; // Digital signatures will not be present if saved with Preview
        default : // text, checkbox, radiobutton, combobox, listbox
            // Get the page numbers on which the current field's widgets reside
            // typeof = number (for single widget) or object (array, more than one widget with the same name)
            fp = doc.getField(f_name).page;
            // Determine the number of widgets for the current field
            nWidgets = (typeof fp === "number") ? 1 : fp.length;
            // Loop through the current field's widgets
            for (j = 0; j < nWidgets; j += 1) {
                // Get a reference to the current widget
                fw = doc.getField(f_name + "." + j);
                // Save the current widget's border color
                cc = fw.strokeColor;
                // Set the current widget's stroke color to a temporary color,
                // either c1 or c2. Choose c2 if the current color equals c1
                fw.strokeColor = color.equal(cc, c1) ? c2 : c1;
                // Set the widget stroke color back to the original border color
                fw.strokeColor = cc;
            break;
    // Allow Acrobat/Reader to redraw the field appearances
    doc.delay = false;
    app.alert("All fields have been processed.", 3, 0);

PSP: problems with viewing data

Hello.
I'm currently working at on-line shop and have some problems with viewing data from database. When there is no much inserts to table its working very well. But after inserting all Inserts I have its acting weird.
Sample with 10 INSERTS:
http://gafgarion.atspace.com/psp/1.jpg
Sample with 100 INSERTS:
http://gafgarion.atspace.com/psp/2.jpg
I'm using Oracle 9i. when I have more data in my database its acting weird. There is SELECT only from one table, but sometimes I have data from other tables aswell.
I didnt touch any config files or something else. Only created new User and DAD.
any ideas what should I do to fix that ??
thnx in advice

Hello,
My guess is that you are speaking about PLSQL Server Pages (PSP), and the PLSQL Web Toolkit.
This is why I do not think that you will have lot of answer since this forum is targeted toward Web Services developer (XML, SOAP, and so on)
I am inviting you to ask your question on the general Oracle Application Server - General or PLSQL forums.
Regards
Tugdual Grall

PLSQL Server Pages (PSP): problems with viewing data

Hello.
I'm currently working at on-line shop and have some problems with viewing data from database. When there is no much inserts to table its working very well. But after inserting all Inserts I have its acting weird.
Sample with 10 INSERTS:
http://gafgarion.atspace.com/psp/1.jpg
Sample with 100 INSERTS:
http://gafgarion.atspace.com/psp/2.jpg
I'm using Oracle 9i. when I have more data in my database its acting weird. There is SELECT only from one table, but sometimes I have data from other tables aswell.
I didnt touch any config files or something else. Only created new User and DAD.
any ideas what should I do to fix that ??
thnx in advice

Hello,
My guess is that you are speaking about PLSQL Server Pages (PSP), and the PLSQL Web Toolkit.
This is why I do not think that you will have lot of answer since this forum is targeted toward Web Services developer (XML, SOAP, and so on)
I am inviting you to ask your question on the general Oracle Application Server - General or PLSQL forums.
Regards
Tugdual Grall

Can't view data from BI Anaytics

Hi,
I am new to BI suite. currently our repository has two different connection pool associated with two different schema. Since my ex-coworker built the first one and left. I don't want to mess up with his work. I built another connection pool with different schema. There is no problem with deployment and i am able to view data in physical layer. But when i login to BI analytics and i found i am not able to view data. The error is:
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 17001] Oracle Error code: 1031, message: ORA-01031: insufficient privileges at OCI call OCIStmtExecute. [nQSError: 17010] SQL statement preparation failed. (HY000)
SQL Issued: SELECT 0 s_0, "Sample Sales"."Products"."Brand" s_1 FROM "Sample Sales" FETCH FIRST 65001 ROWS ONLY
My DBA told me it might be ODBC driver problem since he told me he didn't even see the query from database monitor. When i check ODBC setup in BI server and found there is default odbc setup under System DSN.
does anybody know what this problem is?
Thanks

Good day !
I will to public my results with simple solving my problem,
because it may be useful to somebody else.
---------------- Create materialized view ---------
create materialized view easydw.CUSTOMER_PURCHASES_MV
TABLESPACE "EASYDW_DEFAULT"
BUILD IMMEDIATE
USING INDEX
REFRESH FORCE ON COMMIT
AS
select "CUSTOMER"."OCCUPATION" as "OCCUPATION",
"PURCHASES"."CUSTOMER_ID" as "CUSTOMER_ID"
from "PURCHASES" "PURCHASES", "CUSTOMER" "CUSTOMER"
where "CUSTOMER"."CUSTOMER_ID"="PURCHASES"."CUSTOMER_ID";
Now if one of tables updated, you must execute SQL-command
"COMMIT". Before this you must deselect "AutoCommit" at
SQL-window, if you use Application Express.
Winni.

Not able to view data from more than one data package in PSA

Hi Friends,
Desparetly trying to view data in PSA. Problem :
If i mark more than one datapackage this error raises:
You must only select one data packet when entering data record numbers
Message no. RSAODS127
And there is no change to reset data record numbers.
What is wrong ?
Thanks in advance for help.
Joe
BW3.5, SP21
Edited by: J.F.B. on Jul 2, 2009 11:40 AM

Hi again,
Seems I'm too stupid for this issue.......
As I understand there are two ways to view PSA :
1. PSA maintenance in RSA1
2. In SE11/SE16 viewing the underlaying transparent table
ad 1.
When I try to filter erroneous records for more than one datapackage situation is as described above.
ad 2.
Trying to view the table works, but where is the chararcteristic/field marking a record as erroneous
in table /BIC/Bxxxxxxxx (table containing PSA-Data) ?
Thanks
Joe

Unable to view data in some HR tables

Since I upgraded to SQL Developer 2.1.1.64 I have not been able to view data in the data tab for the following tables that I have run accross: per_all_people_f, per_all_assignments_f or per_all_positions_f.
Other tables that I have been using seem to be working fine, but these I need to use all the time. I get the column numbers returned, but no data or column headings.
Another co-worker that has upgraded is experiencing the same problem.

I could not get the ddl to show up on the sql tab in version 2.1.1.64, but I did run it in version 1.5.4 and this is what was returned.
-- Unable to Render DDL with DBMS_METADATA using internal generator.
CREATE TABLE HR.PER_ALL_PEOPLE_F
PERSON_ID NUMBER(10, 0) NOT NULL,
EFFECTIVE_START_DATE DATE NOT NULL,
EFFECTIVE_END_DATE DATE NOT NULL,
BUSINESS_GROUP_ID NUMBER(15, 0) NOT NULL,
PERSON_TYPE_ID NUMBER(15, 0) NOT NULL,
LAST_NAME VARCHAR2(150 BYTE) NOT NULL,
START_DATE DATE NOT NULL,
APPLICANT_NUMBER VARCHAR2(30 BYTE),
BACKGROUND_CHECK_STATUS VARCHAR2(30 BYTE),
BACKGROUND_DATE_CHECK DATE,
BLOOD_TYPE VARCHAR2(30 BYTE),
COMMENT_ID NUMBER(15, 0),
CORRESPONDENCE_LANGUAGE VARCHAR2(30 BYTE),
CURRENT_APPLICANT_FLAG VARCHAR2(30 BYTE),
CURRENT_EMP_OR_APL_FLAG VARCHAR2(30 BYTE),
CURRENT_EMPLOYEE_FLAG VARCHAR2(30 BYTE),
DATE_EMPLOYEE_DATA_VERIFIED DATE,
DATE_OF_BIRTH DATE,
EMAIL_ADDRESS VARCHAR2(240 BYTE),
EMPLOYEE_NUMBER VARCHAR2(30 BYTE),
EXPENSE_CHECK_SEND_TO_ADDRESS VARCHAR2(30 BYTE),
FAST_PATH_EMPLOYEE VARCHAR2(30 BYTE),
FIRST_NAME VARCHAR2(150 BYTE),
FTE_CAPACITY NUMBER(5, 2),
FULL_NAME VARCHAR2(240 BYTE),
HOLD_APPLICANT_DATE_UNTIL DATE,
HONORS VARCHAR2(45 BYTE),
INTERNAL_LOCATION VARCHAR2(45 BYTE),
KNOWN_AS VARCHAR2(80 BYTE),
LAST_MEDICAL_TEST_BY VARCHAR2(60 BYTE),
LAST_MEDICAL_TEST_DATE DATE,
MAILSTOP VARCHAR2(45 BYTE),
MARITAL_STATUS VARCHAR2(30 BYTE),
MIDDLE_NAMES VARCHAR2(60 BYTE),
NATIONALITY VARCHAR2(30 BYTE),
NATIONAL_IDENTIFIER VARCHAR2(30 BYTE),
OFFICE_NUMBER VARCHAR2(45 BYTE),
ON_MILITARY_SERVICE VARCHAR2(30 BYTE),
ORDER_NAME VARCHAR2(240 BYTE),
PRE_NAME_ADJUNCT VARCHAR2(30 BYTE),
PREVIOUS_LAST_NAME VARCHAR2(150 BYTE),
PROJECTED_START_DATE DATE,
REHIRE_AUTHORIZOR VARCHAR2(30 BYTE),
REHIRE_REASON VARCHAR2(60 BYTE),
REHIRE_RECOMMENDATION VARCHAR2(30 BYTE),
RESUME_EXISTS VARCHAR2(30 BYTE),
RESUME_LAST_UPDATED DATE,
REGISTERED_DISABLED_FLAG VARCHAR2(30 BYTE),
SECOND_PASSPORT_EXISTS VARCHAR2(30 BYTE),
SEX VARCHAR2(30 BYTE),
STUDENT_STATUS VARCHAR2(30 BYTE),
SUFFIX VARCHAR2(30 BYTE),
TITLE VARCHAR2(30 BYTE),
VENDOR_ID NUMBER(15, 0),
WORK_SCHEDULE VARCHAR2(30 BYTE),
WORK_TELEPHONE VARCHAR2(60 BYTE),
COORD_BEN_MED_PLN_NO VARCHAR2(30 BYTE),
COORD_BEN_NO_CVG_FLAG VARCHAR2(30 BYTE),
DPDNT_ADOPTION_DATE DATE,
DPDNT_VLNTRY_SVCE_FLAG VARCHAR2(30 BYTE),
RECEIPT_OF_DEATH_CERT_DATE DATE,
USES_TOBACCO_FLAG VARCHAR2(30 BYTE),
BENEFIT_GROUP_ID NUMBER(15, 0),
REQUEST_ID NUMBER(15, 0),
PROGRAM_APPLICATION_ID NUMBER(15, 0),
PROGRAM_ID NUMBER(15, 0),
PROGRAM_UPDATE_DATE DATE,
ATTRIBUTE_CATEGORY VARCHAR2(30 BYTE),
ATTRIBUTE1 VARCHAR2(150 BYTE),
ATTRIBUTE2 VARCHAR2(150 BYTE),
ATTRIBUTE3 VARCHAR2(150 BYTE),
ATTRIBUTE4 VARCHAR2(150 BYTE),
ATTRIBUTE5 VARCHAR2(150 BYTE),
ATTRIBUTE6 VARCHAR2(150 BYTE),
ATTRIBUTE7 VARCHAR2(150 BYTE),
ATTRIBUTE8 VARCHAR2(150 BYTE),
ATTRIBUTE9 VARCHAR2(150 BYTE),
ATTRIBUTE10 VARCHAR2(150 BYTE),
ATTRIBUTE11 VARCHAR2(150 BYTE),
ATTRIBUTE12 VARCHAR2(150 BYTE),
ATTRIBUTE13 VARCHAR2(150 BYTE),
ATTRIBUTE14 VARCHAR2(150 BYTE),
ATTRIBUTE15 VARCHAR2(150 BYTE),
ATTRIBUTE16 VARCHAR2(150 BYTE),
ATTRIBUTE17 VARCHAR2(150 BYTE),
ATTRIBUTE18 VARCHAR2(150 BYTE),
ATTRIBUTE19 VARCHAR2(150 BYTE),
ATTRIBUTE20 VARCHAR2(150 BYTE),
ATTRIBUTE21 VARCHAR2(150 BYTE),
ATTRIBUTE22 VARCHAR2(150 BYTE),
ATTRIBUTE23 VARCHAR2(150 BYTE),
ATTRIBUTE24 VARCHAR2(150 BYTE),
ATTRIBUTE25 VARCHAR2(150 BYTE),
ATTRIBUTE26 VARCHAR2(150 BYTE),
ATTRIBUTE27 VARCHAR2(150 BYTE),
ATTRIBUTE28 VARCHAR2(150 BYTE),
ATTRIBUTE29 VARCHAR2(150 BYTE),
ATTRIBUTE30 VARCHAR2(150 BYTE),
LAST_UPDATE_DATE DATE,
LAST_UPDATED_BY NUMBER(15, 0),
LAST_UPDATE_LOGIN NUMBER(15, 0),
CREATED_BY NUMBER(15, 0),
CREATION_DATE DATE,
PER_INFORMATION_CATEGORY VARCHAR2(30 BYTE),
PER_INFORMATION1 VARCHAR2(150 BYTE),
PER_INFORMATION2 VARCHAR2(150 BYTE),
PER_INFORMATION3 VARCHAR2(150 BYTE),
PER_INFORMATION4 VARCHAR2(150 BYTE),
PER_INFORMATION5 VARCHAR2(150 BYTE),
PER_INFORMATION6 VARCHAR2(150 BYTE),
PER_INFORMATION7 VARCHAR2(150 BYTE),
PER_INFORMATION8 VARCHAR2(150 BYTE),
PER_INFORMATION9 VARCHAR2(150 BYTE),
PER_INFORMATION10 VARCHAR2(150 BYTE),
PER_INFORMATION11 VARCHAR2(150 BYTE),
PER_INFORMATION12 VARCHAR2(150 BYTE),
PER_INFORMATION13 VARCHAR2(150 BYTE),
PER_INFORMATION14 VARCHAR2(150 BYTE),
PER_INFORMATION15 VARCHAR2(150 BYTE),
PER_INFORMATION16 VARCHAR2(150 BYTE),
PER_INFORMATION17 VARCHAR2(150 BYTE),
PER_INFORMATION18 VARCHAR2(150 BYTE),
PER_INFORMATION19 VARCHAR2(150 BYTE),
PER_INFORMATION20 VARCHAR2(150 BYTE),
PER_INFORMATION21 VARCHAR2(150 BYTE),
PER_INFORMATION22 VARCHAR2(150 BYTE),
PER_INFORMATION23 VARCHAR2(150 BYTE),
PER_INFORMATION24 VARCHAR2(150 BYTE),
PER_INFORMATION25 VARCHAR2(150 BYTE),
PER_INFORMATION26 VARCHAR2(150 BYTE),
PER_INFORMATION27 VARCHAR2(150 BYTE),
PER_INFORMATION28 VARCHAR2(150 BYTE),
PER_INFORMATION29 VARCHAR2(150 BYTE),
PER_INFORMATION30 VARCHAR2(150 BYTE),
OBJECT_VERSION_NUMBER NUMBER(9, 0),
DATE_OF_DEATH DATE,
ORIGINAL_DATE_OF_HIRE DATE,
TOWN_OF_BIRTH VARCHAR2(90 BYTE),
REGION_OF_BIRTH VARCHAR2(90 BYTE),
COUNTRY_OF_BIRTH VARCHAR2(90 BYTE),
GLOBAL_PERSON_ID VARCHAR2(30 BYTE),
COORD_BEN_MED_PL_NAME VARCHAR2(80 BYTE),
COORD_BEN_MED_INSR_CRR_NAME VARCHAR2(80 BYTE),
COORD_BEN_MED_INSR_CRR_IDENT VARCHAR2(80 BYTE),
COORD_BEN_MED_EXT_ER VARCHAR2(80 BYTE),
COORD_BEN_MED_CVG_STRT_DT DATE,
COORD_BEN_MED_CVG_END_DT DATE,
PARTY_ID NUMBER(15, 0),
NPW_NUMBER VARCHAR2(30 BYTE),
CURRENT_NPW_FLAG VARCHAR2(30 BYTE),
GLOBAL_NAME VARCHAR2(240 BYTE),
LOCAL_NAME VARCHAR2(240 BYTE)
, CONSTRAINT PER_PEOPLE_F_PK PRIMARY KEY
PERSON_ID,
EFFECTIVE_START_DATE,
EFFECTIVE_END_DATE
ENABLE
TABLESPACE "HR_DATA_SPACE_01"
LOGGING
PCTFREE 10
PCTUSED 40
INITRANS 16
MAXTRANS 255
STORAGE
INITIAL 48K
NEXT 8000K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 1
BUFFER_POOL DEFAULT
ALTER TABLE HR.PER_ALL_PEOPLE_F
ADD CONSTRAINT PER_PEOPLE_F_FK1 FOREIGN KEY
BUSINESS_GROUP_ID
REFERENCES HR.HR_ALL_ORGANIZATION_UNITS
ORGANIZATION_ID
) ENABLE
ALTER TABLE HR.PER_ALL_PEOPLE_F
ADD CONSTRAINT PER_PEOPLE_F_FK2 FOREIGN KEY
PERSON_TYPE_ID
REFERENCES HR.PER_PERSON_TYPES
PERSON_TYPE_ID
) ENABLE
ALTER TABLE HR.PER_ALL_PEOPLE_F
ADD CONSTRAINT HR_PER_DATE_OF_DEATH CHECK
(DATE_OF_DEATH >= DATE_OF_BIRTH)
ENABLE
ALTER TABLE HR.PER_ALL_PEOPLE_F
ADD CONSTRAINT PER_PER_ON_MILITARY_SRV_CHK CHECK
(ON_MILITARY_SERVICE IN ('Y','N'))
ENABLE
ALTER TABLE HR.PER_ALL_PEOPLE_F
ADD CONSTRAINT PER_DPDNT_VLNTRY_SVCE_FLAG_CHK CHECK
(DPDNT_VLNTRY_SVCE_FLAG in ('Y','N'))
ENABLE
ALTER TABLE HR.PER_ALL_PEOPLE_F
ADD CONSTRAINT PER_PER_SECOND_PASSPORT_CHK CHECK
(SECOND_PASSPORT_EXISTS IN ('Y','N'))
ENABLE
ALTER TABLE HR.PER_ALL_PEOPLE_F
ADD CONSTRAINT PER_PER_FAST_PATH_EMPLOYEE_CHK CHECK
(FAST_PATH_EMPLOYEE IN ('Y','N'))
ENABLE
ALTER TABLE HR.PER_ALL_PEOPLE_F
ADD CONSTRAINT PER_COORD_BEN_NO_CVG_FLAG CHECK
(COORD_BEN_NO_CVG_FLAG in ('Y','N'))
ENABLE
ALTER TABLE HR.PER_ALL_PEOPLE_F
ADD CONSTRAINT PER_PER_RESUME_EXISTS_CHK CHECK
(RESUME_EXISTS IN ('Y','N'))
ENABLE
ALTER TABLE HR.PER_ALL_PEOPLE_F
ADD CONSTRAINT PER_PER_SEX_CHK CHECK
(SEX IN ('M', 'F'))
ENABLE
ALTER TABLE HR.PER_ALL_PEOPLE_F
ADD CONSTRAINT PER_PER_EXPENSE_CHECK_SEND_CHK CHECK
(EXPENSE_CHECK_SEND_TO_ADDRESS IN ('H', 'O', 'P'))
ENABLE
CREATE INDEX HR.CSUH_PPF_ATTR12_IDX ON HR.PER_ALL_PEOPLE_F (ATTRIBUTE12 ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE
INITIAL 1M
NEXT 104K
MINEXTENTS 1
MAXEXTENTS 8192
PCTINCREASE 0
FREELISTS 1
FREELIST GROUPS 1
BUFFER_POOL DEFAULT
CREATE INDEX HR.CSUH_PPF_ATTR1_IDX ON HR.PER_ALL_PEOPLE_F (ATTRIBUTE1 ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 0
INITRANS 16
MAXTRANS 255
STORAGE
INITIAL 560K
NEXT 160K
MINEXTENTS 1
MAXEXTENTS 8192
PCTINCREASE 0
FREELISTS 1
FREELIST GROUPS 1
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N1 ON HR.PER_ALL_PEOPLE_F (UPPER(FULL_NAME) ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 10
INITRANS 11
MAXTRANS 255
STORAGE
INITIAL 16K
NEXT 256K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 4
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N2 ON HR.PER_ALL_PEOPLE_F (UPPER(LAST_NAME) ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 10
INITRANS 11
MAXTRANS 255
STORAGE
INITIAL 16K
NEXT 256K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 4
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N50 ON HR.PER_ALL_PEOPLE_F (LAST_NAME ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 0
INITRANS 16
MAXTRANS 255
STORAGE
INITIAL 496K
NEXT 160K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 1
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N51 ON HR.PER_ALL_PEOPLE_F (EMPLOYEE_NUMBER ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 0
INITRANS 16
MAXTRANS 255
STORAGE
INITIAL 328K
NEXT 80K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 1
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N52 ON HR.PER_ALL_PEOPLE_F (APPLICANT_NUMBER ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 0
INITRANS 16
MAXTRANS 255
STORAGE
INITIAL 16K
NEXT 8K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 1
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N53 ON HR.PER_ALL_PEOPLE_F (NATIONAL_IDENTIFIER ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 0
INITRANS 16
MAXTRANS 255
STORAGE
INITIAL 496K
NEXT 160K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 1
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N54 ON HR.PER_ALL_PEOPLE_F (FULL_NAME ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 0
INITRANS 16
MAXTRANS 255
STORAGE
INITIAL 760K
NEXT 240K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 1
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N55 ON HR.PER_ALL_PEOPLE_F (PARTY_ID ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 10
INITRANS 11
MAXTRANS 255
STORAGE
INITIAL 16K
NEXT 4M
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 4
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N56 ON HR.PER_ALL_PEOPLE_F (NPW_NUMBER ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 10
INITRANS 11
MAXTRANS 255
STORAGE
INITIAL 16K
NEXT 4M
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 4
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N57 ON HR.PER_ALL_PEOPLE_F (UPPER(GLOBAL_NAME) ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 10
INITRANS 11
MAXTRANS 255
STORAGE
INITIAL 16K
NEXT 256K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 4
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N58 ON HR.PER_ALL_PEOPLE_F (UPPER(LOCAL_NAME) ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 10
INITRANS 11
MAXTRANS 255
STORAGE
INITIAL 16K
NEXT 256K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 4
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N59 ON HR.PER_ALL_PEOPLE_F (EMAIL_ADDRESS ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 10
INITRANS 11
MAXTRANS 255
STORAGE
INITIAL 16K
NEXT 4M
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 4
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N60 ON HR.PER_ALL_PEOPLE_F (GLOBAL_NAME ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 10
INITRANS 11
MAXTRANS 255
STORAGE
INITIAL 16K
NEXT 4M
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 4
BUFFER_POOL DEFAULT
;

Unable to view data in the InfoCube as well as in the query

Hi all,
I have done the Init Load into an InfoCube 0Pur_c01. The Monitoring status is Green. I checked the Qm status which is green. There is data in the PSA.
However, I am unable to view data in the InfoCube. Also when I execute the report I am receiving 'Application Data not found'error.
It looks to be a strange sitaution.
Please help me out
Regards
YJ

Hi,
I hope, some times the the unavailability of "PROCESSKEY" value for the records delivers like this.
Refer the note: 353042
And also refer the links:
Re: Problem extracting 2LIS_03_BX into 0IC_C03
Re: Records Not Added
And also search this forum with "PROCESSKEY"
With rgds,
Anil Kumar Sharma .P

Problem with date format from Oracle DB

Hi,
I am facing a problem with date fields from Oracle DB sources. The date format of the field in DB table is 'Date base type is DATE and DDIC type is DATS'.
I mapped the date fields to Date characters in BI. Now the data that comes to PSA is in weird format. It shows like -0.PR.09-A
I have changing the field settings in DataSource to internal and external and also i have tried mapping these date fields to text fields with out luck. All delivers the same format.
I have also tried using conversion routines like, CONVERSION_EXIT_IDATE_INPUT to change format. It also delivers me the same old result.
If anybody of you have any suggestions or if anybody have you experienced such probelms, Please share your experience with me.
Thanks in advance.
Regards
Varada

Thanks for all your reply. I can only the solutions creating view in database. I want some solution to be done in BI. I appreciate if some of you have idea in it.
The issue again in detail
I am facing an issue with date fields from oracle data. The data that is sent from Oracle is in the format is -0.AR.04-M. I am able to convert this date in BI with conversion routine in BI into format 04-MAR-0.
The problem is, I am getting data of length 10 (Output format) in the format -0.AR.04-M where the month is not in numericals. Since it is in text it is taking one character spacing more.
I have tried in different ways to convert and increased the length in BI, the result is same. I am wondering if we can change the date format in database.
I am in puzzle with the this date format. I have checked other Oracle DB connections data for date fields in BI, they get data in the format 20.081.031 which will allow to convert this in BI. Only from the system i am trying creating a problem.
Regards
Varada

How do I view data from OLAP DML program or statement?

Hi
I'm struggling to find any information on this topic anywhere on the net:
How to view data produced by an Oracle OLAP DML program or statement.
Background :
I am using the latest AWM to create and maintain dimensions, cubes and measures. However, I've noticed that AWM, Discoverer OLAP, BI Beans, Excel Plug-In et al only provide a fixed set of formula and expressions.
For example, I wanted to created a Standard Deviation (STDEV) on measure. After much searching I learnt that I could do this by creating a custom measure in AWM by importing a measure defined in an XML dcoument as it's not provided by AWM. The output in Discoverer OLAP on the surface seems to give the correct results, however when drilling from high level to lower level of time time dimension hierarchy Discoverer includes the parent value in the calculation and renders the values incorrect.
My alternative is to use OLAP DML, as it provides a richer range of formuale and calculations possibilities and I was hoping to use this functionality to do create the measures. I have the distinct impression, however, that OLAP Worksheet is the only interface out there to do this.
It seems very primitive and limited with regards to data output, almost like SQL*Plus in many ways.
The burning questions I have are :
1) Do I need to write DML programs to perform these custom measure calculations and add them to cubes or do I import the custom measures via AWM and XML?
2) If the answer to question 1 is DML programming, is there a way of viewing the OLAP data output through a GUI interface without embedding the statements in SQL.
3) Has anyone experienced or noticed the same problem with Discoverer OLAP, AWM Viewer that I mentioned above? i,e, statistical functions performed on whole dimension hierarchy rather than lower levels.
I'm hoping someone out there knows what I am trying to do or get at. Keith, any ideas or suggestions?
Thanks
Kind Regards
Greg

Hi Greg,
There are two ways to achieve what you want. Both require the use of custom calculations which cannot be created via the calculation wizard within AWM. To do this the easiest way is step outside of AWM and use the Excel Calculation utility that is on the OLAP OTN home page:
Creating OLAP Calculations using Excel
http://download.oracle.com/otn/java/olap/SpreadsheetCalcs_10203.zip
Readme
http://www.oracle.com/technology/products/bi/olap/OLAP_SpreadsheetCalcs.html
(Oracle OLAP DML Reference contains a list of all the OLAP functions that can be used to create a custom calculation. http://www.oracle.com/technology/products/bi/olap/OLAP_DML_10.2.zip)
The Excel tool lets you assign your own formula to a measure and then uploads that measure definition into your AW. It is possible to import a custom calculation template into AWM using the menu option on the Calculated Measure node of each cube, but it is safer to use the Excel Worksheet as this directly uses the public XML API and is always best to use a public API rather than hacking XML templates.
There are two types of custom calculation:
1) Formula: using a formula you can directly call any of the OLAP functions. For example to create a measure that returns the standard deviation for a measure then you would enter the following as the formula for your calculated measure:
stddev(sales_revenue, time)
The easiest way to test if the measure is working as expected is to use the data viewer within AWM.
2) Programs - if the function you need is not provided or you want to do special processing to return a result you can create an OLAP DML program which can return a result. To do this use OLAP Worksheet to define the program and add a datatype to the DEFINE statement, such as :
DEFINE PRG_SD_SALES PROGRAM DECIMAL
In the program return the value you have calculated within your program. Within the program you can do just about anything but be aware that your program is going to fire for every cell within your virtual cube so it must be efficient and fast to execute. For a measure then you would enter the following as the formula for your calculated measure:
prg_sd_sales(time, products, geographies, channels).
The actual program code would look something like this:
DEFINE PRG_SD_REVENUE PROGRAM DECIMAL
PROGRAM
argument T_TIME TIME
argument T_PRODUCT PRODUCTS
argument T_GEOGRAPHY GEOGRAPHIES
argument T_CHANNEL CHANNELS
variable D_RETURN decimal
TEMPSTAT TIME, PRODUCTS, GEOGRAPHIES, CHANNELS
do
limit PRODUCTS to T_PRODUCT
limit CHANNELS to T_CHANNEL
limit GEOGRAPHIES to T_GEOGRAPHY
limit TIME to T_TIME
limit TIME add descendants using TIME_PARENTREL
limit TIME keep TIME_LEVELREL 'CAL_MONTH'
D_RETURN = stddev(SALES_REVENUE)
doend
return D_RETURN
END
This code computes a standard deviation the all months within the specified time range, at year level for all 12 months, at quarter level for the three months within the quarter ans returns NA at the month level.
As the code executes within a implicit loop you can only change the status fo dimensions that for part of that implicit by using the TEMPSTAT command. To test the program at the command line use the OLAP Worksheet and the SHOW command to just return one cell of data, DO NOT SIMPLY USE THE RPR COMMAND because you will have to wait for the whole cube to be returned. If you want to use the RPR command make sure you limit your base dimensions first! You can use PRGTRACE to debug your program code it is not working as expected. Again, the easiest way to test if the measure is working as expected is to use the data viewer within AWM, although this will not return debug information so send all your debug output to a file to capture any errors and/or trace the execution flow.
Hope this helps
Keith Laker
Oracle EMEA Consulting
BI Blog: http://oraclebi.blogspot.com/
DM Blog: http://oracledmt.blogspot.com/
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Samples: http://www.oracle.com/technology/products/bi/samples/

Error While viewing data on XML model- java.sql.SQLException: constante num

I am trying to read an XML file and I keep getting an error. At first it worked, and the it stopped working. I re-did everthing exactly as first time and I cannot get it work
Here is what I do :
1)     Create Physical Architecture under the XML Technology.
a) we create a Data Server with these data:
          Name: XML_SERIVA_TM_DES
          Technology: XML
          JDBC Driver: com.sunopsis.jdbc.driver.xml.SnpsXmlDriver
          JDBC Url: jdbc:snps:xml?file=c:\Temp\hoy\CRM_CR_CURRENCY.xml&dtd=c:\Temp\hoy\ServiciosSerivaConsultasTypes0.xsd
     b) We place the files xml and xsd files according to the JDBC provided in previous point.
     We click on "Test Connection" and Connection is correct
     c) We create a physical schema under the Data Server created in point a) , with these data:
          Name: XML_SERIVA_TM_DES (After created the name is replaced by XML_SERIVA_TM_DES.Esquema)
          Schema (Schema) : <No Definido> ( not sure of english value, it should be <Undefined>)
          Schema (Work Schema) : <No Definido> ( not sure of english value, it should be <Undefined>)
          Default :It is a checkbox , and it is ticked.
          Under the "Context" tab, we add a logical schema named XML_SERIVA_TM for the "Desarrollo" Context
2) Create a Model On the Designer Navigator, we expand the "Models" panel
     a) For Organization, We create a "Folder" Model. It is named "XML"
     b) Under the Folder created in a), we create a new Model , with these data:
          Name: XML_SERIVA_TM
          Code: XML_SERIVA_TM
          Technology: XML
          Logical Schema: XML_SERIVA_TM
     c) Do reverse-engineering.
          In the Reverse tab of the model,
               + "Standard" is selected
               + Context: "Desarrollo"
               + The types of objects to reverse-engineer are: Table
          In the Selective reverse tab, we select : New Datastores, Existing Datastores, Objects to reverse.
          All the datastores that appear are checked
          We click on Reverse Engineer in the toolbar menu
          And the reverse engineer is done successfully and the datastores appear in the model panel
     d) We try to test the reverse engineering by clicking on the datastores and select "View Data",
          after click we get the folloging exception (running with Local agent) :
          See com.borland.dx.dataset.DataSetException error code: BASE+66
          com.borland.dx.dataset.DataSetException: constante numérica mal escrita
          Chained exception:
          java.sql.SQLException: constante numérica mal escrita
               at org.hsqldb.jdbc.Util.sqlException(Unknown Source)
               at org.hsqldb.jdbc.JDBCPreparedStatement.<init>(Unknown Source)
               at org.hsqldb.jdbc.JDBCConnection.prepareStatement(Unknown Source)
               at com.sunopsis.jdbc.driver.xml.SnpsXmlConnection.prepareStatement(SnpsXmlConnection.java:1192)
               at sun.reflect.GeneratedMethodAccessor65.invoke(Unknown Source)
               at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
               at java.lang.reflect.Method.invoke(Method.java:597)
               at oracle.odi.core.datasource.dwgobject.support.OnConnectOnDisconnectDataSourceAdapter$OnDisconnectCommandExecutionHandler.invoke(OnConnectOnDisconnectDataSourceAdapter.java:200)
               at $Proxy2.prepareStatement(Unknown Source)
               at com.borland.dx.sql.dataset.Database.createPreparedStatement(Unknown Source)
               at com.borland.dx.sql.dataset.o.a(Unknown Source)
               at com.borland.dx.sql.dataset.o.d(Unknown Source)
               at com.borland.dx.sql.dataset.o.f(Unknown Source)
               at com.borland.dx.sql.dataset.QueryProvider.e(Unknown Source)
               at com.borland.dx.sql.dataset.JdbcProvider.provideData(Unknown Source)
               at com.borland.dx.dataset.StorageDataSet.refresh(Unknown Source)
               at com.borland.dx.sql.dataset.QueryDataSet.refresh(Unknown Source)
               at com.sunopsis.graphical.frame.edit.AbstractEditFrameGridBorland.initialize(AbstractEditFrameGridBorland.java:624)
               at com.sunopsis.graphical.frame.edit.AbstractEditFrameGridBorland.<init>(AbstractEditFrameGridBorland.java:864)
               at com.sunopsis.graphical.frame.edit.EditFrameTableData.<init>(EditFrameTableData.java:50)
               at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
               at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
               at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
               at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
               at oracle.odi.ui.editor.AbstractOdiEditor$1.run(AbstractOdiEditor.java:153)
               at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:655)
               at java.lang.Thread.run(Thread.java:662)
          Caused by: org.hsqldb.HsqlException: constante numérica mal escrita
               at org.hsqldb.error.Error.error(Unknown Source)
               at org.hsqldb.error.Error.error(Unknown Source)
               at org.hsqldb.ParserBase.read(Unknown Source)
               at org.hsqldb.ParserBase.readThis(Unknown Source)
               at org.hsqldb.ParserDQL.XreadFromClause(Unknown Source)
               at org.hsqldb.ParserDQL.XreadTableExpression(Unknown Source)
               at org.hsqldb.ParserDQL.XreadQuerySpecification(Unknown Source)
               at org.hsqldb.ParserDQL.XreadSimpleTable(Unknown Source)
               at org.hsqldb.ParserDQL.XreadQueryPrimary(Unknown Source)
               at org.hsqldb.ParserDQL.XreadQueryTerm(Unknown Source)
               at org.hsqldb.ParserDQL.XreadQueryExpressionBody(Unknown Source)
               at org.hsqldb.ParserDQL.XreadQueryExpression(Unknown Source)
               at org.hsqldb.ParserDQL.compileCursorSpecification(Unknown Source)
               at org.hsqldb.ParserCommand.compilePart(Unknown Source)
               at org.hsqldb.ParserCommand.compileStatement(Unknown Source)
               at org.hsqldb.Session.compileStatement(Unknown Source)
               at org.hsqldb.StatementManager.compile(Unknown Source)
               at org.hsqldb.Session.execute(Unknown Source)
               ... 26 more
We also try to create an interface with the datastore of the model as source of the interface, and
get the same exact exception as above, when interfaces in executed either with no-agent(local) or with an agent.
Bellow I pasted the xsd schema and XML data:
CRM_CR_CURRENCY.xml
<?xml version = '1.0' encoding = 'UTF-8'?>
<m:indicadoresResponse xmlns:m="http://co/com/bancodecredito/eai/serviciosLinea/seriva">
<ns0:WS_ResultadoConsultaIndicadores xmlns:ns0="http://co/com/bancodecredito/eai/serviciosLinea/seriva/impl">
<ns0:Error>0</ns0:Error>
<ns0:Descripcion>Transacción exitosa</ns0:Descripcion>
<ns0:indicadores>
<ns0:fecha>2011-08-10 00:00:00.0</ns0:fecha>
<ns0:descripcion>VALORACION (TRM VIGENTE) UVR/UVR</ns0:descripcion>
<ns0:tipoIndicador>3</ns0:tipoIndicador>
<ns0:codigoIndicador>312</ns0:codigoIndicador>
<ns0:codigoVertice>0</ns0:codigoVertice>
<ns0:plazo>0</ns0:plazo>
<ns0:valor>196.9975</ns0:valor>
<ns0:comportamiento>1</ns0:comportamiento>
<ns0:formato>3</ns0:formato>
</ns0:indicadores>
</ns0:WS_ResultadoConsultaIndicadores>
</m:indicadoresResponse>
ServiciosSerivaConsultasTypes0.xsd
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" targetNamespace="http://co/com/bancodecredito/eai/serviciosLinea/seriva" xmlns:s0="http://schemas.xmlsoap.org/wsdl/" xmlns:s1="http://co/com/bancodecredito/eai/serviciosLinea/seriva" xmlns:s2="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:s3="http://www.openuri.org/2006/12/wsdl/upgradedJWS" xmlns:xs="http://www.w3.org/2001/XMLSchema">
     <xs:import namespace="http://co/com/bancodecredito/eai/serviciosLinea/seriva/impl" schemaLocation="resultado.xsd" />
     <xs:element name="indicadoresResponse">
          <xs:complexType>
               <xs:sequence>
                    <xs:element ref="impl:WS_ResultadoConsultaIndicadores" xmlns:impl="http://co/com/bancodecredito/eai/serviciosLinea/seriva/impl" />
               </xs:sequence>
          </xs:complexType>
     </xs:element>
</xs:schema>
resultado.xsd
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" targetNamespace="http://co/com/bancodecredito/eai/serviciosLinea/seriva/impl" xmlns:s0="http://schemas.xmlsoap.org/wsdl/" xmlns:s1="http://co/com/bancodecredito/eai/serviciosLinea/seriva" xmlns:s2="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:s3="http://www.openuri.org/2006/12/wsdl/upgradedJWS" xmlns:tns="http://co/com/bancodecredito/eai/serviciosLinea/seriva/impl" xmlns:xs="http://www.w3.org/2001/XMLSchema">
     <xs:element name="WS_ResultadoConsultaIndicadores">
          <xs:complexType>
               <xs:sequence>
                    <xs:element name="Error" type="xs:string" />
                    <xs:element name="Descripcion" type="xs:string" />
                    <xs:sequence maxOccurs="unbounded" minOccurs="0">
                         <xs:element name="indicadores">
                              <xs:complexType>
                                   <xs:sequence>
                                   <xs:element name="fecha" type="xs:string" />
                                   <xs:element name="descripcion" type="xs:string" />
                                   <xs:element name="tipoIndicador" type="xs:int" />
                                   <xs:element name="codigoIndicador" type="xs:int" />
                                   <xs:element name="codigoVertice" type="xs:int" />
                                   <xs:element name="plazo" type="xs:int" />
                                   <xs:element name="valor" type="xs:double" />
                                   <xs:element name="comportamiento" type="xs:int" />
                                   <xs:element name="formato" type="xs:int" />
                                   </xs:sequence>
                              </xs:complexType>
                         </xs:element>
                    </xs:sequence>
               </xs:sequence>
          </xs:complexType>
</xs:element>
</xs:schema>
I really don't have any clue about what is happening. I have made sure files are in UTF-8 encoding. I don't know if any jar might be corrupted.

You may sure have found the answer but it can help futur visitors:
Did you specified a Schema name for your physical schema ?
I had the same problem and no schema was set in my physical schema, when setting it, it must be OK.

Problem viewing data

Similar Messages

Maybe you are looking for