Problem viewing .flv's on an external server

I am working with the program eLMS Pro (http://www.elmspro.com/elms/) and I can upload my published file via zip to their server (no flvs in the zip due to the file size). I have placed my zip files on an other server in a folder which is my source url. I can get the LMS to view my course but when I get to the video I can see it connecting in the browser to the server and then it says "Done" but no video loads. Just black screen. What am I doing wrong? I cannot house the videos on the same server and therefore I must house them externally. Before purchasing Captivate we posed this question and there shouldn't be an issue with making it work. I've spoken to eLMS Pro and they are of no help. Their servers are set up to view flvs and so I'm guessing I've got something checked wrong.
Any help on this would be greatly appreciated.

I went ahead and did it anyway, no slip-ups yet.

Similar Messages

Has anyone else had problems uploading modifyed files to an external server

Hi, My website bilyz.com has been running OK on two external servers, two different hosting providers, yet neither will allow me to upload modified files.
Since both external servers will run my site OK this narrows the problem source down to my site construction (pre 2014 update) or to Muse software.
The external servers will accept all my html files without a hitch but stalls at various images and not always the same image.
Now I have totally rebuilt the site by stripping out all images, resizing them and remounting them into the slider widget but it doesn't make a difference.
The external server technicians are at a loss to explain and after research have referred me back to Adobe Muse.
Kind regards
Bill Watters

Thank you Aish
As per your suggestion I published the unchanged site to Business Catalyst as bilyzcom.businesscatalyst.com and it uploaded without a fault. Then I made an alteration to the Gallery page where I changed one image in the slider and a small typo on the Design page. Then published again but this time I selected 'options' and clicked on 'modified files only' Result: The site uploaded perfectly and the altered pages showed the recent changes.
So can we conclude that the source of the problem isn't in the Muse software?.
However, If this problem only occurs with the external server since the update; it also stalls when uploading all files and with modified files so could it point to the recent Muse 2014 update?
Yesterday I have also uninstalled my most recent version then re-installed it via the Creative Cloud File manager. . My copy is 2014.0.1.30 CL 785017
I hope this gives you something to work on.
I look forward to your reply.

I have an external server that stores all my movies and music, is there a way to stream it to my apple tv? If not is there a way I can link the folders to itunes (without downloading files to computer) and will that make them view-able for the apple TV?

I have an external server that stores all my movies and music, is there a way to stream it to my apple tv?
If not is there a way I can link the folders to itunes (without downloading files to computer) that will make them view-able for the apple TV?
If none of that works is there a way to get it working alternativly?
Additional Information:
Everything is linked via ethernet cable.
I'm using a PC to set it up.
If you have any other questions feel free to ask and I'll help where I can.
Thank you for any help

(I think the daughter got he better end of the deal!) I believe if you change the password and user id one of the devices it will stop that from occurring. But I'm not the one to tell you how to do it; someone like "Illaass" (Illaass seems to know how to correct / fix almost anything!) will know how if you don't. Just look for the "cat" icon.

Using a site in iWeb to publish to an external server - problems with RSS

Hi!
I have a rather odd problem. I have a .Mac account, but I also work for a non-profit organization that has asked me to handle their website. I would like to use iWeb to do that and am attempting to publish the site to an external server. However, I also want to use iWeb to publish my own personal account pages to .Mac.
I have the site up and running, and most everything works on it except the RSS feed. I typed the url into the Publish to Server dialogue, but it has been to no avail. I wonder if it has to do with the fact that I am not publishing ALL of my sites to this server, just one of the sites. (When I invoke the Publish to Server command, it creates a master index and folders for each of the sites. Then, I have been discarding all of them except for the folder of the site I want to publish, which I have to name "public_html" to conform with our domain provider's requirements. This works great, except the RSS feed is broken when I do this.
I know I can use a seperate log-in account and re-make the entire webpage there, but I consider that to be a last resort and I am looking for a better method than this.
Any suggestions? The site is http://www.oatag.org
Thanks,
Steve
MacBook 2gHz Core Duo Mac OS X (10.4.2) 1 GB RAM, Superdrive, 100 Gig HD

Then, I have been
discarding all of them except for the folder of the
site I want to publish, which I have to name
"public_html" to conform with our domain provider's
requirements. This works great, except the RSS feed
is broken when I do this.
When you break the site structure by changing names of folders you also break the link for the RSS feed.
I find it hard to believe you are really required to change the name of the folder like that. Instead you should be inserting into the folder called public_html the following two things: the folder published by iWeb which has the same name as your site does inside iWeb, plus the index html file published alongside it. To make sure that this index.html file actually points to the site you are uploading, make sure this site is at the top of the list inside iWeb before publishing.

Flash CC Air iOS: Problems with loading text from an external xml located on a server.

So I have this code allowing me to load text from an xml located on a server. Everything works fine on the Air for Android. The app even works in the ios emulator, but once I export my app to my ios device with ios 7, I don't see any text. The app is developed with Air sdk 3.9. What could be the reason? Do I need any special permissions like on Android? Does ios even allow to load xml from an external server?
Any clues?

It was my bad. I linked to a php file to avoid any connection lags, which was absolutely fine on the android, but didn't seem to work on the ios 7. So all I did is change the php extension to xml and it worked without any problems.

I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my we

I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my website online (with Firefox, Explorer, Chrome browser) I always get the message 'Forbidden, You don't have permission to access / on this server.' Can somebody help me please? I have to get my website online..Thank you!

Hello Els,
it's well known, that in all these cases you describe I'm not a friend of a detailed Troubleshooting (I see Nancy#s smile already).
To be able to be independent in all this things It is one of the reasons why I prefer an external FTP program. The difficulties with which you have to fight encourage me in this opinion, not least because we always search for experts, we don't charge a "jack of all trades".
To manage several websites or to upload my files and sometimes for the opposite way, for a necessary download from my server or to use a "a site-wide synch", I'm using FileZilla. It simply looks easier for me to keep track of all operations precisely and generate or reflect easily the desired tree structure.
Above all, FileZilla has a feature (translation from my German FileZilla) called "compare file list". Here it's possible to use file size or modification time as a criterion. There is also the possibility to "hide identical files", so that only these files which you want to redact remain visible.
And even if it means you have to install a new program, I am convinced that there is an advantage. Here is the link to get it and where you can read informations about how it works:
http://filezilla-project.org/ and http://wiki.filezilla-project.org/Tutorial#Using_the_site_manager
Mac: Mac OS X (Use: Show additional download options)
http://filezilla-project.org/download.php
Of course, you also need all the access data to reach your server and for MIME issues, you should contact your web host/provider.
Good luck!
Hans-Günter
P.S.
Since I use two screens, the whole thing became even more comfortable.

Viewing FLV files offline

I am currently using Bridge CS3 to view all of my FLV files
on my Mac.
Is there a dedicated player, or a plugin for Quicktime that
will allow
me to view FLV files without having to open Bridge?
Thanks.

I would NOT recommend you waste your time downloading Adobe Media Player, there are already numerous complaints about this player. It appears to let you 'download' the videos. There is a download screen in which you can see the progress of files being downloaded for 'offline' viewing and the files are stored in your application cache folder. They then show up as 'downloaded' ready for offline viewing.
However, the player MYSTERIOUSLY deletes these files later at some magical time, an hour or two hours or six.... later for some STRANGE UNEXPLAINED reason. In addition, you will not know which ones will be deleted. I had 20 episodes in m Flex course already downloaded. Of these all but two were deleted.You can prevent this, by going in the cache and copying the folder and then opeing the flv files directly. This begs the question, why delete the files in the first place.
Despite many complaints made to adobe about this 'bug', nothing has been said, no replies received from Adobe. As a newby to Adobe development I take this a sign of the indifference this company is to a straighforward problem. What a waste of bandwidth, download quota, server time. Just LET US DOWNLOAD ONCE.
If you like, you can try using the media player but to prevent having to redownload the files a few hours later you can try to just copy the respective folder and do the annoying thing of opeining up the files.
Thanks Adobe for ....

FTP_CONNECT failed for SAPFTP from WD4A to external Server

Hi experts,
this is a challange to you.
He do have a WD4A application runnig on a BI with SAP NetWeaver 2004s and a SAP BASIS 700 Level 21 highest Support package SAPKB70021.
The application runs well and only some strange behaviors in CZ and HU we have obtained. But this is not the Question i will ask:
For an excel template download we will use at an external MS Server2003. We want to sent the data string which has to
be displayed in excel via FTP to this server (The server will convert the data string with makros and send it back zu WD4A).
So far so good. But every time we tried to open the connection with FTP_CONNECT we the communication failed.
What do we do exactly?
1. Event through Button
1. Creating the data string on Eventhandler method (View)
2. using a Function Call from Eventhandler to start the file transfer.
3. Parameters are user, pwd, host, destination ...
4. with HTML_SCAMBLE hint pwd
5. call function 'FTP_CONNECT'
The connection failed.
WE DO CALL the Function correct, cause testing FTP_CONNECT with Program RSFTP002 the connection works.
IF we start the Function Call we use inside the WD4A outside the WD4A, the connection works.
We do have an ITS Service which works on this Server. An RFC CALL to the ERP R/3 with the same Function Call fails also as the Call in BI.
Does anyone know, if there are technical limits to WD4A to use the connections to an external server via SAPFTP ? It is forbidden to mount the file system of the server directly on the SAP BI System.
Our Basis and Network guys would not find anything.
At least: WE do use an Excel download with templates without using the MS Server. Therefore we have problems with different MS Office Versions, Language and date display. Thats why we want to go the way above.
lot of greetings
Thorsten

Hi,
where exactly is the FM crashing and why? Did you debug? Is it occuring at
CALL FUNCTION 'FTP_CONNECT' DESTINATION RFC_DESTINATION
     EXPORTING USER = USER PWD = PASSWORD ACCT = ACCOUNT HOST = HOST
               TRACE = FTP_TRACE GUSER = GATEWAY_USER
               GPWD = GATEWAY_PASSWORD GHOST = GATEWAY_HOST
     IMPORTING HANDLE = HANDLE ERROR = CERROR
     EXCEPTIONS SYSTEM_FAILURE = 1 COMMUNICATION_FAILURE = 2.
or earlier?
Try tracing with ST01, one time with the way it works, and another time out of the WebDynpro where it crashes, then compare the logs.
regards, Lukas

Problem while reading XML file from Aplication server(Al11)

Hi Experts
I am facing a problem while reading XML file from Aplication server using open data set.
OPEN DATASET v_dsn IN BINARY MODE FOR INPUT.
IF sy-subrc <> 0.
EXIT.
ENDIF.
READ DATASET v_dsn INTO v_rec.
WHILE sy-subrc <> 0.
ENDWHILE.
CLOSE DATASET v_dsn.
The XML file contains the details from an IDOC number , the expected output is XML file giving all the segments details in a single page and send the user in lotus note as an attachment, But in the present output after opening the attachment i am getting a single XML file which contains most of the segments ,but in the bottom part it is giving the below error .
- <E1EDT13 SEGMENT="1">
<QUALF>001</QUALF>
<NTANF>20110803</NTANF>
<NTANZ>080000</NTANZ>
<NTEND>20110803<The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'file:///C:/TEMP/notesD52F4D/SHPORD_0080005842.xml'.
/SPAN></NTEND>
<NTENZ>000000</NTENZ>
for all the xml its giving the error in bottom part , but once we open the source code and if we saved in system without changing anything the file giving the xml file without any error in that .
could any one can help to solve this issue .

Hi Oliver
Thanx for your reply.
see the latest output
- <E1EDT13 SEGMENT="1">
<QUALF>003</QUALF>
<NTANF>20110803</NTANF>
<NTANZ>080000</NTANZ>
<NTEND>20110803</NTEND>
<NTENZ>000000</NTENZ>
<ISDD>00000000</ISDD>
<ISDZ>000000</ISDZ>
<IEDD>00000000</IEDD>
<IEDZ>000000</IEDZ>
</E1EDT13>
- <E1EDT13 SEGMENT="1">
<QUALF>001</QUALF>
<NTANF>20110803</NTANF>
<NTANZ>080000</NTANZ>
<NTEND>20110803<The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'file:///C:/TEMP/notesD52F4D/~1922011.xml'.
/SPAN></NTEND>
<NTENZ>000000</NTENZ>
E1EDT13 with QUALF>003 and <E1EDT13 SEGMENT="1">
with <QUALF>001 having almost same segment data . but E1EDT13 with QUALF>003 is populating all segment data
properly ,but E1EDT13 with QUALF>001 is giving in between.

Problem while dowloading the file from Application Server

Dear Experts,
I am facing the Problem while downloading the file from Application server.
We done the automatic function while saving the invoice, this will create an idoc, and this idoc is written in the Application Server.
I am running the Transaction AL11 and select the record, and from menu --> List, i am downloading into TXT format.
But for some segments, the length is long, and so the last 3 to 4 fields values are not appearing in the File. Even though i am unable to view the values in the file before downloading. But i can view in IDOC.
Please help me to solve this issue.
Thanks & Regards,
Srini

but our user will use the Txn. AL11 and they will download from there
Educate the user On a serious note, tell him this is not how data from app server should be downloaded. You can ask him to talk to the basis team to provide him access to the app server folder where the file is being stored.
I can set the Variant and put this in background, But always the file name will be change, Like we use Time stamp in the File name.
You can't automate this process by scheduling in BG mode. This is because the in BG mode you can't dwld the file to presentation server.
Hope i'm clear.
BR,
Suhas

Cant do a file get from external server using file sender adapter with ftp

Hi all,
Up until now our company has only used the file sender adapter with ftp protocol to get a file from our XI server for processing and input the file into an integration process
I have a requirement to do an ftp file get from an external server
From our XI development server I can ftp directly to the external server and view the required directory using the command window via a DOS prompt (FTP open ...). So all firewall issues and communications are fine
Unfortunately I cannot currently pull files from the external server using the XI file adapter with ftp protocol from the XI development server AWB017
FTP Connection Parameters: External server name using port 21, Data Connection is Passive, No security, I supply a userid and password
Processing Parameters: Processing Mode is Archive (I tried test but this did not work either)
No messages appear in the RWB
Is there something else that I need to set up in order for the external ftp get to work via the XI file adapter?
Regards,
Mike

Thanks for your responses.
I have found the error messages in the File Adapter Monitor
Scenario 1
When I prefix the source directory with a forward slash, eg /Folder/Subfolder the error message is as follows
EST: Error: Error connecting to ftp server 'ip address': FTPEx: /Folder/Subfolder: The system cannot find the path specified
Scenario 2
When I DO NOT prefix the source directory with a forward slash, eg Folder/Subfolder a different error message is returned
Error: Retrieving file 'FILENAME.XML' failed unexpectedly: FTPEx: Folder/Subfolder: The system cannot find the path specified
At least in this scenario the adapter has been able to identify the file on the external FTP site but cannot retrieve it
Questions
I thought that the backslash prefix for the source directory was mandatory but I am receiving an error in each scenario
I receive the same error message whether the Processing Mode is 'Archive' or 'Test'
The logs on the external ftp server seem to indicate that I am simply connecting, sending username and password then quiting straight away. I am not issuing any commands that they can see
I thought that being a Sender adapter it would inherently execute a Pull or Get command
To recap, from our XI development server I can ftp directly to the external server and view the required directory using the command window via a DOS prompt (FTP open ...). So all firewall issues, communications, userid and password are fine
Has anyone experienced these issues?
Please advise on next course of action?
Regards,
Mike

Error When connecting to FLVs via Vitalstream's Media Server

Hello,
I get an error everytime I try to connect to an FLV using
Vitalstream's Media Server. I have turned on and off the
Autobandwidthdetection property in the VideoPlayer component (to
bypass main.asc)(If that even matters (no support in these
errors!!!!!) I though it might be the FLV encoding but it runs with
no problem when I run the FLV locally: Here is the error that I
get:
Error #2044: Unhandled AsyncErrorEvent:. text=Error #2095:
flash.net.NetConnection was unable to invoke callback streamInfo.
error=ReferenceError: Error #1069: Property streamInfo not found on
mx.controls.videoClasses.NCManagerConnectClient and there is no
default value.
at mx.controls.videoClasses::NCManager/::connectRTMP()
at mx.controls.videoClasses::NCManager/connectToURL()
at mx.controls.videoClasses::VideoPlayer/::_load()
at mx.controls.videoClasses::VideoPlayer/play()
at mx.controls::VideoDisplay/play()
at mx.controls::VideoDisplay/::autoPlaying()
at mx.controls::VideoDisplay/::creationCompleteHandler()
at
flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.core::UIComponent/dispatchEvent()
at mx.core::UIComponent/set initialized()
at mx.managers::LayoutManager/::doPhasedInstantiation()
at Function/
http://adobe.com/AS3/2006/builtin::apply()
at mx.core::UIComponent/::callLaterDispatcher2()
at mx.core::UIComponent/::callLaterDispatcher()
Please someone help! Vitalstream is not being helpful at
all.

I am also getting this error when using VitalStream. Was an
answer ever found this this issue? If anybody has any suggestions,
all help is appreciated.
Error #2044: Unhandled AsyncErrorEvent:. text=Error #2095:
flash.net.NetConnection was unable to invoke callback streamInfo.
error=ReferenceError: Error #1069: Property streamInfo not found on
mx.controls.videoClasses.NCManagerConnectClient and there is no
default value.
at mx.controls.videoClasses::NCManager/::connectRTMP()
at mx.controls.videoClasses::NCManager/connectToURL()
at mx.controls.videoClasses::VideoPlayer/::_load()
at mx.controls.videoClasses::VideoPlayer/load()
at mx.controls::VideoDisplay/load()
at mx.controls::VideoDisplay/::autoPlaying()
at mx.controls::VideoDisplay/::creationCompleteHandler()
at
flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.core::UIComponent/dispatchEvent()
CODE
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute">
<mx:Panel title="VideoDisplay Control Example"
height="75%" width="75%"
horizontalAlign="center"
paddingTop="10" paddingLeft="10" paddingRight="10"
paddingBottom="10">
<mx:Text width="75%" color="blue"
text="Use the buttons to control the video. The Stop button
resets the video to the beginning."/>
<mx:VideoDisplay
id="myVid"
height="158"
width="211"
source="rtmp://LINK REMOVED"
autoPlay="false"/>
<mx:HBox>
<mx:Button label="Play" click="myVid.play();"/>
<mx:Button label="Pause" click="myVid.pause();"/>
<mx:Button label="Stop" click="myVid.stop();"/>
</mx:HBox>
<mx:HBox>
<mx:Label text="{myVid.bytesLoaded} of
{myVid.bytesTotal}" />
<mx:Label text="{myVid.playheadTime} of
{myVid.totalTime}" />
</mx:HBox>
</mx:Panel>
</mx:Application>
Text

Problem viewing some webpages

Hey
Looking for some help with my macbook. I have been having problems viewing videos on youtube and i'm unsure of the problem. When i try to view a video it comes up with this message.
"Hello, you either have JavaScript turned off or an old version of Adobe's Flash Player. Get the latest Flash player."
Also youtube doesn't look right. It looks like it is all in some kind of basic format with no graphics, ads, pictures etc. (Im not particularly computer savvy)
I've checked my all the settings are correct in preferences, i've updated flash player and made sure all other software is up to date and still no joy!
I had no important data on my macbook so i wiped it and reinstalled the OS and updated everything again, it still hasn't sorted the problem.
Im unsure what to do next, any ideas would be much appreciated.
PS i recently had someone's external hard drive plugged in to it, could i have got some virus from this??

Thanks for the swift reply greg.
I assumed it probably was not a virus but i thought i'd check anyway. Thats pretty much the reason i bought a mac.
I checked the preferences and JavaScript was already enabled and all other boxes checked also. It only seems to be youtube thats the problem so far although i have not been on many other websites since.
My internet connection is not particularly fast, i am using my college wifi network and it can often be very slow. I usually need to let videos load for a couple of minutes before i can watch.
I have had the Macbook for about a week and have been using it regularly. The problem only started yesterday. I also carried out all my apple updates yesterday, i'm not sure if this is what has led to the problem??

Problem viewing Japanese characters in Excel sent via Email attachment

Hi All
I am using FM '''SO_DOCUMENT_SEND_API1'' to send out an e-mail attachment (Excel file). I am able to receive the Excel file successfully. However I am not able to display the Japanese characters properly in my Excel file.
I tried to display some Japanese characters in my e-mail contents and I have no problem viewing these characters in my e-mail (I am using MS Outlook 2003). These statements becomes something illegible when I transfer it over to Excel as an attachment. In my Internal Table, these characters are displayed correctly as well.
Anyone has any advice to solve this issue?
Thanks for your replies.

Hi Divya,
refer to the link below:
http://www.sapdevelopment.co.uk/reporting/email/attach_xls.htm
The code in this demonstrates how to send an email to an external email addresswhere the data is stored within a .xls attachment.
Hope this helps.
Reward if helpful.
Regards,
Sipra

Publishing my flex application in external server (Channel.Security.Error error Error #2048)

when i publish my flex application in an external server i get that error if my flash builder beta 2 is closed in my system , i did configure an endpoint to the dataservice to point to the external server and if i run my flash builder and any body browser the site it open and they can access the data from my application but if i close my flash builder we have this error all of us
Send failed
Channel.Security.Error error Error #2048: Security sandbox violation:
http://www.dcecrak.com/Maine.swf cannot load data from
http://localhost:37813/flex2gateway/?hostport=www.dcecrak.com&https=N&id=-1. url:
'http://www.dcecrak.com/flex2gateway/'
i created a crossdomain.xml file and put it in the web root , if i try to open the link http://www.dcecrak.com/flex2gateway it open with blank page this means that every thing is oky , my service-config file looks like that :
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
 <services>
 <service-include file-path="remoting-config.xml" />
 <service-include file-path="proxy-config.xml" />
 <service-include file-path="messaging-config.xml" />
 </services>
 <security>
 <login-command class="flex.messaging.security.JRunLoginCommand" server="JRun"/>
 
 
 </security>
 <channels>
 
<channel-definition id="dcecrak" class="mx.messaging.channels.AMFChannel">
 <endpoint uri="http://www.dcecrak.com/flex2gateway/" class="coldfusion.flash.messaging.CFAMFEndPoint"/>
 <properties>
 <add-no-cache-headers>false</add-no-cache-headers>
 <polling-interval-seconds>8</polling-interval-seconds>
 <serialization>
 <enable-small-messages>false</enable-small-messages>
 </serialization>
 <coldfusion>
 
 <access>
 
 <use-mappings>true</use-mappings>
 
 <method-access-level>remote</method-access-level>
 </access>
 
 <use-accessors>true</use-accessors>
 
 <use-structs>false</use-structs>
 <property-case>
 
 <force-cfc-lowercase>false</force-cfc-lowercase>
 
 <force-query-lowercase>false</force-query-lowercase>
 
 <force-struct-lowercase>false</force-struct-lowercase>
 </property-case>
 </coldfusion>
 </properties>
 </channel-definition>
 <channel-definition id="cf-polling-amf" class="mx.messaging.channels.AMFChannel">
 <endpoint uri="http://{server.name}:{server.port}{context.root}/flex2gateway/cfamfpolling" class="coldfusion.flash.messaging.CFAMFEndPoint"/>
 <properties>
 <polling-enabled>true</polling-enabled>
 <polling-interval-seconds>8</polling-interval-seconds>
 <serialization>
 <enable-small-messages>false</enable-small-messages>
 </serialization>
 <coldfusion>
 
 <access>
 
 <use-mappings>true</use-mappings>
 
 <method-access-level>remote</method-access-level>
 </access>
 
 <use-accessors>true</use-accessors>
 
 <use-structs>false</use-structs>
 <property-case>
 
 <force-cfc-lowercase>false</force-cfc-lowercase>
 
 <force-query-lowercase>false</force-query-lowercase>
 
 <force-struct-lowercase>false</force-struct-lowercase>
 </property-case>
 </coldfusion>
 </properties>
 </channel-definition>
 <channel-definition id="my-cfamf-secure" class="mx.messaging.channels.SecureAMFChannel">
 <endpoint uri="https://{server.name}:{server.port}{context.root}/flex2gateway/cfamfsecure" class="coldfusion.flash.messaging.SecureCFAMFEndPoint"/>
 <properties>
 <polling-enabled>false</polling-enabled>
 <add-no-cache-headers>false</add-no-cache-headers>
 <serialization>
 <enable-small-messages>false</enable-small-messages>
 </serialization>
 <coldfusion>
 
 <access>
 
 <use-mappings>true</use-mappings>
 
 <method-access-level>remote</method-access-level>
 </access>
 
 <use-accessors>true</use-accessors>
 
 <use-structs>false</use-structs>
 <property-case>
 
 <force-cfc-lowercase>false</force-cfc-lowercase>
 
 <force-query-lowercase>false</force-query-lowercase>
 
 <force-struct-lowercase>false</force-struct-lowercase>
 </property-case>
 </coldfusion>
 </properties>
 </channel-definition>
 
 <channel-definition id="java-amf" class="mx.messaging.channels.AMFChannel">
 <endpoint uri="http://{server.name}:{server.port}{context.root}/flex2gateway/amf" class="flex.messaging.endpoints.AMFEndpoint"/>
 </channel-definition>
 <channel-definition id="java-secure-amf" class="mx.messaging.channels.SecureAMFChannel">
 <endpoint uri="https://{server.name}:{server.port}{context.root}/flex2gateway/amfsecure" class="flex.messaging.endpoints.SecureAMFEndpoint"/>
 </channel-definition>
 <channel-definition id="java-polling-amf" class="mx.messaging.channels.AMFChannel">
 <endpoint uri="http://{server.name}:{server.port}{context.root}/flex2gateway/amfpolling" class="flex.messaging.endpoints.AMFEndpoint"/>
 <properties>
 <polling-enabled>true</polling-enabled>
 <polling-interval-seconds>8</polling-interval-seconds>
 </properties>
 </channel-definition>
 
 </channels>
 <logging>
 <target class="flex.messaging.log.ConsoleTarget" level="Error">
 <properties>
 <prefix>[BlazeDS] </prefix>
 <includeDate>false</includeDate>
 <includeTime>false</includeTime>
 <includeLevel>false</includeLevel>
 <includeCategory>false</includeCategory>
 </properties>
 <filters>
 <pattern>Endpoint.*</pattern>
 <pattern>Service.*</pattern>
 <pattern>Configuration</pattern>
 <pattern>Message.*</pattern>
 </filters>
 </target>
 </logging>
 <system>
 <manageable>false</manageable>
 
 </system>
</services-config>
and my crossdomain.xml looks like that :
<cross-domain-policy>
<site-control permitted-cross-domain-policies="all"/>
<allow-access-from domain="localhost" to-ports="*" secure="false"/>
<allow-access-from domain="*" to-ports="*" secure="false"/>
<allow-http-request-headers-from domain="*"/>
</cross-domain-policy>
really its strange only the site works if my flash builder is running , please help

Thanks all for your attention, i have solved my problem and i think its a bug in the flash builder , the problem was that when you compile the application and you enabling Network Monitoring , the communication of the AMF channels done throw the http://localhost:37813/flex2gateway/
and that was the problem if you close the flash builder on your system that getaway dose not exist and on the hosted server there is no such address localhost by this port also so the client application witch is catch in you system try to access your localhost and that cause a security error and the address is also not exist .
so the solution or we have to compile the project after we disable the Network Monitoring in flash builder .

Problem viewing .flv's on an external server

Similar Messages

Maybe you are looking for