Problem viewing .xlsx and .xlsm file in DMS using Display from Archive Link

Hello All,
We are using IXOS as a content server for storing the documents through SAP Archive Link.
We are not storing any documents in SAP DMS.
The client has an requirement to manage .xlsx and .xlsm documents.
1. xlsx - We defined a new document class xlsx under SAP NetWeaver ..-> ArchvieLink and made the required mime and sheet settings. This allows to upload a .xlsx file to IXOS server succesfully (using Check in Archive) link.
But whenever we try to view the file using "Display from Archive", the browser gives a warning message that the file is in different format than xls. Do you want to still open (Standard Excel application message). On clicking yes, the file opens in .xls format instead of .xlsx.
The client doesn't want to change the format to .xls. What can be done to preserve the .xlsx files.
2. xlsm - Any clue as to does SAP ECC 6.0 support this file type for DMS? And if how the config settings are to be done?
I will be grateful any help.
Thanks.
Ketki

Hi Ketki,
based on your description I think that maybe SAP note 1289314 could help here and made sure that the local copy also has extension XLSX or XLSM.
Best regards,
Christoph

Similar Messages

Is there a way to view, access and process files on a unix server from APEX

Hello all,
We are looking at retrieving (text)documents that are uploaded to a Unix server. The server is seperate from the server that hosts APEX. Would anyone know how to do this or point me to some examples?
Thanks

If you followed the instructions in the manual you would have configured Contacts to sync to an app on your computer such as Outlook or Address Book. Then all you would have to do is set the new phone to sync with the same app on the computer. If you didn't do this you are probably out of luck, although there are some 3rd party apps that can extract data from the backup if it is not encrypted.

CPS Simple File Deployer corrupts XLSX and DOCX files when copying to server. Solutions?

When Contribute Publishing Service Simple File Deployment copies XLSX and DOCX files from our staging server to the live production web server, it is corrupting them. The resulting file on the live web server is a few bytes different in size. I published a 9015-byte docx file to our staging server using Dreamweaver (or Contribute). The resulting file on the staging server opens correctly and remains 9015 bytes. Then, using CPS Simple File Deployer, I deployed the file from our staging server to our live web server. The resulting file on the live web server is 9017 bytes, and it won't open. Something similar happens with XLSX files. It works fine with XLS, DOC, Html etc. Well, there is an issue with dependent files unless I synchronize with Dreamweaver, but that's another story.
Once File Deployer has corrupted the files, opening them brings a message, such as "Excel has found unreadable content in filename.xlsx. . . ". With Word, it says "The Office Open XML file filename.docx cannot be opened because there are problems with the contents . . . The file is corrupt and cannot be opened." Sometimes the docx files can be recovered, but that doesn't help.
When I take the same original docx file and put it on the web server with an FTP program, it remains 9015 bytes and opens successfully on the live web server.
For several reasons, such as many users updating the website with Adobe Contribute and not let them use FTP directly to the live server, we need to keep the staging server and use File Deployer (or something) to deploy the changed files from the staging server to the live website.
I read somewhere that the programming code the uploads files can have problems and fail to work properly with Office 2007 files. I don't have access to CPS's core.ctc and deployfile.cfc files, and I don't have Cold Fusion.
Any suggestions?
Dean

Try:
Open My Computer.
Open the Tools menu and choose Folder Options...
Select the File Types tab.
Select the extension (for example DOC, or XLS) of the file that is slow to open.
In the Details section, click [Advanced], and another dialog box will open.
In the Actions section, click Open then click [Edit...], and another dialog box will open.
http://windowssecrets.com/forums/showthread.php/149672-10-9-2012-Updates-and-very-slow-opening-of-Office-files
KR

Problems viewing 1080i/60 .mov files

I am having problems viewing 1080i/60 .mov files. When I open the file, it shows all white. I have exported some HD footage shot on my HVX 200. I am using FCP 5.0.4. I also have created some animated clips from Vue 6 Infinite and it does the same thing.
I have Quicktime Pro 7.1.5
does anyone have any suggestions on what to do, or what I need to download in order to have this work?
Thanks

Export from Final Cut using the Apple Intermediate codec to view in QuickTime.
You've probably exported using an HDV codec only used by Final Cut.

Problem with Preview and PSD files - random gray square

Hi guys, hope you can help...
I've got a problem with Preview and PSD files.
If I open in Preview both an original jpg straight from my reflex and the photoshop version of the same picture, the psd file presents a gray square (of what it seems unrendered image) in a random area of the photo (sometimes in the center.). The square is quite big...
If I zoom in or zoom out it disappears...if I scroll to another photo and then back to the psd, the square it's there again...sometimes in a different position.
I've tried the same psd on my older iMac with leopard...and got no problem at all.
I suspect it got something to do with my Ati...
(this is the second iMac 27...the first went back for gray banding on the lcd screen and flickering and yellow tinge........)
Thanks for your help.
DAve.

maybe I'm onto something...
I've just found out that opening Preview in 32bit mode (instead of default 64bit) works flawlessly with any psd files. If I switch back to 64bit mode, Preview is much faster but the gray square comes back...
It seems like the i7 is much faster than the Ati....
Any more realistic ideas?

I have 2 iphones syncing on one computer and on the same apple ID. Before i updatad my Itunes to the last available update and my Iphones to 5.01 i had no problem draging jpg. and mp3 files into my iphones DCIM folder (the picture folder that opens when c

I have 2 iphones syncing on one computer and on the same apple ID.
Before i updatad my Itunes to the last available update and my Iphones to 5.01
i had no problem draging jpg. and mp3 files into my iphones DCIM folder (the picture folder that opens
when conecting to Itunes). Since my updates Itune wont let me drag and drop any files' even pictures that
were taken with my Iphone on 4.3.3.
Please help as we have no itunes music in Israel, only apps and i cant copy any of my old music from my computer
to my iphones.
If it helps, i am using a pc with 32 bit windows 7.
Other from the obove Itunes works fine and does sync pictures from my computer to my Iphone from "my pictures" folder.
Thank you for your time
Yoni Bliss
[email protected]

The title of my initial post is a bit misleading. I already took a chance deleting one of the iPhones, hoping if I deleted the wrong one, I can still reauthorize it (all with the same Apple ID acct, so not subject to 90-day waiting period, right?) The iTunes database just updated itself, and it says I have 4 "devices" "in the Cloud", but 5 "computers" associated w my account. How can I find out what computers are associated? Isn't there a list I can see? I dont have a clue what computers they might be. If I use the "Deauthorize All" option, is it a pain to add them all back in. I assume I would have to log in from each computer to reauthorize each one. Would I have to be running the newest OS or version of iTunes to reauthorize? I think I have a PowerBook G4 Titanium with an older OS and iTunes. I'd like to keep that authorized, if possible.

Problem in tutorial and zip file. can anyone file it or correct it..

hi jdev experts,
am using jdev11.1.1.5.0.
when am new to these webservice. i followed this tutorial
http://docs.oracle.com/cd/E18941_01/tutorials/jdtut_11r2_14/jdtut_11r2_14.html
url wsdl link when use that wsdl.
throws some error.
what is the reason john says. ok at second post of the thread.
Consuming a Web Service from a Web Page
so if i change the wsdl means and somethings has to be changed in tutorial steps.
if any newbie crossing this tutorials feels very difficult to work. so can change the wsdl url link and those steps.
and another thing I installed 11.1.2.0 and download that zip file in that tutorial and i run throws the same error.
so. problem in tutorial and zip file. can anyone file or correct..
i think think this is the right place to tell this. or else re-direct me.

this is to arun.
As the exception stack clearly mentions that the endpoint is moved, it is up to the users to make use of any other webservice.trace says link is moved i know.
thing am here is:
please make note on that tutorials.
* note :- just like this consume some other external webservices. dont use this webservice this webservices link is broken.
this what saying.
this to john.
thanks. thanks again.

How to view and access files on my iBook G3 from another iMac

**Hello, everybody on this excelent forum. I need to know how to use my Firewire conection, to view and access files in my iBook G3, from another iMac G3, both are OK in working good condition. I put this question because some days ago a Mac expert fix to me the access in my recent SwapMeet second hand aqcired iMac G3, without the original last owner password.
this person are egoistic, and DoNot show me how he use the Firewire do this job.
Thank You: Eduardo from NorthWest Mexico.

Hello, Niel, Thank You very Much for your fast and kindly responce.
the next monday I'll buy a new FireWire cable to test the metod you tell me.
Again thanks and best regards from NW-Mexico.
Eduardo

Convert .fmb and .rdf files to .txt using unix commands

I want to know how to convert .fmb and .rdf files to .txt using unix commands
Example ACCT_ACCOUNTS_ADMIN.fmb ---> ACCT_ACCOUNTS_ADMIN.txt
agent_balances.rdf ---> agent_balances.txt
NOTE: i don't want to use form builder or report builder.
is there anyone who can help me
Regards
Harsh

Thanks it helped and Just to add little bit on it
for i in `ls *.fmb`
do
f60gen module=$i userid=$unpw forms_doc=yes batch=yes
done
Might help someone too.
Thanks

I dragged and dropped files to my time capsule from my laptop but now I cannot find them anywhere on there... Please help

I dragged and dropped files to my time capsule from my laptop but now I cannot find them anywhere on the time capsule... Please help I no longer have that laptop. All it is showing is time machine backups.

Open Macintosh HD and look for your Time Capsule icon under the SHARED heading on the left side of the window.
Click on the Time Capsule icon and folder will appear to the right representing your drive
Double click the folder to reveal the contents
You should see a xxxxxx.sparsebundle file for each computer that is backing up and the files that you dropped onto the Time Capsule from the other computer. Leave these files alone.
If you do not see the other files, unfortunately, they are not there.

Get photo from archive link and link into WDA Image UI

Hi guys,
I have employee photos stored in archive link under PREL HRICOLFOTO object.
The question is: how can I get the image and link it on an image UI element on WDA?
I have read some posts but, to be honest, I don't understand very well.
I'm trying use ARCHIV_GET_CONNECTIONS function module to obtain ARC_DOC_ID field, but I don't know which is the following step.
Can anyone help me?
Thank you.

More info about the issue...
In fact, I can see the temporary file created on ICM cache, but when I try to open the file is not appearing the photo, it is appearing the string. I put my source code:
<pre>
<code>
* Get ARC_DOC_ID string from archive link for the employee 10002 
CALL FUNCTION 'ARCHIV_GET_CONNECTIONS'
 EXPORTING
 objecttype = 'PREL'
 object_id = '10002'
 until_ar_date = sy-datum
 TABLES
 connections = lt_connections
PARAMETER =
 EXCEPTIONS
 nothing_found = 1
 OTHERS = 2.
DATA: gx_mimetype TYPE string VALUE 'image/jpeg'.
DATA: l_image TYPE xstring.
DATA: converter TYPE REF TO cl_abap_conv_out_ce.
****Create the cached response object that we will insert our content into
DATA: cached_response TYPE REF TO if_http_response.
CREATE OBJECT cached_response
 TYPE
 cl_http_response
 EXPORTING
 add_c_msg = 1.
TRY. " ignore, if compression can not be switched on
 CALL METHOD cached_response->set_compression
 EXPORTING
 OPTIONS = cached_response->co_compress_based_on_mime_type
 EXCEPTIONS
 OTHERS = 1.
 CATCH cx_root.
ENDTRY.
****set the data and the headers
DATA: l_app_type TYPE string.
DATA: l_xstring TYPE xstring,
 i_cache_timeout TYPE i VALUE '60'.
READ TABLE lt_connections INTO ls_connections INDEX 1.
* On this part I try to convert STRING (ARC_DOC_ID) into XSTRING, I don't know if it is correct or not!!!!
*-- Convert
converter = cl_abap_conv_out_ce=>create( encoding = 'DEFAULT' ).
converter->reset( ).
CALL METHOD converter->write
 EXPORTING
 data = ls_connections-arc_doc_id.
* Store on l_image xstring converted!!!!!!
l_image = converter->get_buffer( ).
cached_response->set_data( l_image ).
l_app_type = gx_mimetype.
cached_response->set_header_field( name = if_http_header_fields=>content_type
 value = l_app_type ).
****Set the Response Status
cached_response->set_status( code = 200 reason = 'OK' ).
****Set the Cache Timeout - 60 seconds - we only need this in the cache
****long enough to build the page and allow the Image on the Client to request it.
cached_response->server_cache_expire_rel( expires_rel = i_cache_timeout ).
DATA: r_url TYPE string.
DATA: i_path TYPE string VALUE '/sap/public/bc/webdynpro',
 i_format TYPE string VALUE 'JPG'.
****Create a unique URL for the object
DATA: guid TYPE guid_32.
CALL FUNCTION 'GUID_CREATE'
 IMPORTING
 ev_guid_32 = guid.
CONCATENATE i_path '/' guid '.' i_format INTO r_url.
****Cache the URL
cl_http_server=>server_cache_upload( url = r_url
 response = cached_response ).
" bind the generated url with the image uielement attribute
DATA lo_el_context TYPE REF TO if_wd_context_element.
DATA ls_context TYPE wd_this->element_context.
DATA lv_url LIKE ls_context-foto.
get element via lead selection
lo_el_context = wd_context->get_element( ).
set single attribute
lo_el_context->set_attribute(
 EXPORTING
 name = `FOTO`
 value = r_url ).</code></pre>
Thank you
Edited by: vanbelal on Apr 22, 2010 9:39 AM

Problems viewing picutres and opening music files

I have just installed a 32 G micro SD card to my BB curve 8530; since then I start to have problems
viewing pictures.
In addition when opening some of the music files (not all of them) ; I have been receiving
the following messege:
[The media "file name" being played is in unsupported format]
Although all music files are in .MP3 format.
thanks for your help

Back up all data.
Quit Safari. In the Finder, select Go ▹ Go to Folder from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then launch Safari and test.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Slow access when opening XLS or DOC files over the network but XLSX and DOCX files are fast

I am working with a small office that has 3 Windows 7 Pro PC's. Two of these PC's have shared folders that hold Word and Excel files and all 3 of the PC's have drives mapped to these shared folders. When browsing these mapped drive in Windows
Explorer and double-clicking a file 1 of the computers takes about 30-50 seconds to open any file with a .doc or .xls extension. It opens .docx and .xlsx files in a couple seconds though, it also open PDF files very quickly. The other 2 PC's
have no trouble any any type of file. I have tried many things over the last couple weeks to get this fixed. I have added the file locations as 'trusted locations' in the Trust Center and added a couple Registry tweaks to the SMB/ lanman workstation
and server. 2 PC's are running Office Pro 2010 SP2 and the other is Office Pro 2013, the one having the slow access is running Office 2010. Has anyone come across this problem and have any advice??

Try:
Open My Computer.
Open the Tools menu and choose Folder Options...
Select the File Types tab.
Select the extension (for example DOC, or XLS) of the file that is slow to open.
In the Details section, click [Advanced], and another dialog box will open.
In the Actions section, click Open then click [Edit...], and another dialog box will open.
http://windowssecrets.com/forums/showthread.php/149672-10-9-2012-Updates-and-very-slow-opening-of-Office-files
KR

[solved] Problem with Amarok and flac-files

When I installed Arch for the first time a couple of months ago, I was happy to find that some flac-files that didn't play in Amarok on my Debian installation was now played back perfectly. However, upon trying to play these files today, Amarok refuses to play them. I get an error stating that there is no suitable demux plugin for the files. Other flacs play back fine though, and the problem files play back perfectly in mplayer.
Another thing I would be very happy to resolve is that I have a few files that use japanese in their tags. IIRC these displayed correctly in Amarok on my Debian install, but in Arch all I see is squares where there should be japanese, despite me installing both arphic-ukai and arphic-uming packages. What am I missing?
All help appreciated!
Last edited by Emphrygian (2007-04-20 22:36:45)

Your tip worked like a charm and the files now play perfectly in Amarok once again.
I solved my second problem by installing the ttf-sazanami package from AUR and adding both sazanami gothic and sazanami mincho as substitute fonts for Sans Serif (my default font) in qtconfig (not sure that I really needed both though, but hey, it works now ).
Last edited by Emphrygian (2007-04-20 22:35:37)

Problem with Java and Zip Files

Hello there everyone. I have a problem with trying to zip up directories with empty folders in them. They zip fine with my code, but according to winzip, the number of files in the archive is incorrect. It's supposed to have a total of 288 files in it, but when it's zipped up, it only says 284. I mention specifically the "empty directories" note because the zipping works fine without empty folders.
Below is the code for the zip method:
public static void zip(File[] list, File zipfile, File zipRoot)
 throws IOException {
 if (!zipfile.exists()) {
 zipfile.createNewFile();
 else if (!zipfile.isFile()) {
 throw new IOException("The zip file, " + zipfile.getAbsolutePath()
 + " is not a file.");
 if (list.length == 0) {
 LOG.error("The list of files to zip up is empty.");
 for (int i = 0; i < list.length; i++) {
 if (!list.exists()) {
 throw new IOException("The file or directory, " + list[i].getAbsolutePath()
 + " does not exist.");
 FileOutputStream fos = new FileOutputStream(zipfile);
 ZipOutputStream zos = new ZipOutputStream(fos);
 for (int i = 0; i < list.length; i++) {
 if (LOG.isDebugEnabled())
 LOG.debug(i + ": " + list[i].getName());
 String entryName = getRelativeName(list[i], zipRoot);
 if (list[i].isDirectory()){
 if (list[i].listFiles().length == 0){
 ZipEntry entry = new ZipEntry(entryName + "/");
 zos.putNextEntry(entry);
 else {
 ZipEntry ze = new ZipEntry(entryName);
 zos.putNextEntry(ze);
 byte[] buffer = new byte[8096];
 FileInputStream fis = new FileInputStream(list[i]);
 int read = 0;
 read = fis.read(buffer);
 if (LOG.isDebugEnabled())
 LOG.debug("\tFound " + read + " bytes.");
 if (read == -1){
 //empty file, but add it for preservation.
 //zos.write(buffer,0,0);
 while (read != -1) {
 zos.write(buffer, 0, read);
 read = fis.read(buffer);
 fis.close();
 zos.closeEntry();
 zos.close();
The files look like they're there, but I need the system to be able to determine the number correctly.
Here's the interesting thing: It zips the files, and then when I use the size() method for zip files in java, it says 284 files. But when I unzip, it says 288 again. It's like there's files missing when compressed, but when decompressed, they return. Note that the files are actually there. If I open the archive in a third party app such as Winzip AND Winrar AND IZarc, they all show 288 files. Any idea what would make the number of files appear incorrectly in a zip file when zipped by java with the code above? Thanks in advance.
- Chris

I figured out the problem. When zipping files in windows using winzip, it doesn't explicitly count folders as a "file/folder" as a file in itself. It will create the folders for files to go in, but the folder itself will not be 'counted' when you query the info of the file itself. You have more control of the zip file in java, and can count the folder as a file or not.

Problem viewing .xlsx and .xlsm file in DMS using Display from Archive Link

Similar Messages

Maybe you are looking for