Problem w/ audio files

I just got my new macbook pro, and cannot play the audio files on the comp. They are .wma files and worked on my previous macbook, but when trying to play on quicktime it says, "not a video file." I tried Flip4Mac but this didn't work. Any suggestions?

try using the prog swich to change them to MP3 as WMA cannot be played on a MAC
http://www.askdavetaylor.com/convertmac_wma_audio_files_tomp3.html

Similar Messages

IMovie 08 - Problems referencing audio files.

I have just finished creating a new movie in iMovie 08. The problem I am having is iMovie can't find the audio files I used as a soundtrack for the movie. These audio files are located in my iTunes library. The catch is that all of the music in my iTunes library is stored on another computer, so all of the music files are referenced.
The problem began when I had to turn off the other computer for updates, while I still had iMovie open. Mistakenly I forgot to eject the other computer as it was connected as a server to my Mac. Of course iMovie can no longer find the audio files because they are offline.
Well, when I turned the other computer back on and remounted it as a server, iMovie would no longer play the audio files in my movie. I can still access them through the music tab in iMovie, and they play perfectly.
I have even restarted iMovie and my Mac multiple times.
I really don't want to have to redo all of the music for my movie. If anyone can tell me how to "re-reference" audio files in iMovie, I would greatly appreciate it.
Thanks!

Try post on the iMovie forum is my best advice.
Regards
TD

Problems importing audio files in FCP 7.0.1

Has anyone else noticed FCP 7 being much more picky about audio files being imported? MP3s, WAVs & AIFFs that all play on my system or in Quicktime are not being recognized by FCP. The only pattern I can see to these files is they were not created on Macs and may lack certain metadata that FCP expects, but generally, I work under the assumption that if Quicktime can read a file, FCP can too - and that is proving not to be the case.

Thanks for the tip re: JPG v TIFF. And I've done a MP3 -> AIFF conversion now as well.
As it turned out, my problem was not a FCP preferences corruption, but was a matter of where the files came from...we were given a DVD with the still & audio files on them. When I copied those files from the DVD to our Server and then to the Raid hooked up to our Mac, the files would not import. If I went directly from the DVD to the raid, the files imported. Not sure how to make sense of that...but good to be aware of it, and hopefully if anyone else runs into this odd occurrence, this solves it for them...

Problem opening audio files

I can't open or download audio files stored on OneDrive using my iPad 2, whereas I have no problems doing either with my iPhone 4s. both are running under iOS7.1.1. I have compared settings on both devices but can t spot any differences.

like most full version updates (8 to 9)etc, you can't go back to an earlier version.
rick

Exs problems. Audio files sound strange when spread across keyboard

I just bought a sample pack from the fantom g series and started to import the sounds. When I played them they sounded good in two octaves, but when i ventured farther than that on either side the sound became .. . . well , different. I guess the pitch was changing, but when i went low it sounded like there was a deep filter on it and coming from the depts of ****. On the high side, It sounded very xiolophony ( this is the acoustic grand piano 1 btw ) This would happen if fruity loops too. I set the range to max but it sounds way different if you were playing the fantom, or any instrument for that matter. Is this just " the way it goes " as far as sampling on the exs? or am i missing something.
Thank you,

I think you should ask this question to the manufacturer of that sample pack.
It is certainly NOT a limitation of the EXS24. For instance, any seriously sampled piano will cover the full eight octaves, each key sampled on multiple velocity levels, and EXS24 will not limit that in any way, in fact, its range is C-2 up to G8, 10 and-a-fifth octaves. So it is the manufacturer (Roland?) that built the instrument that has limited the range of 'm, for whatever reason.

Can't import audio files in FCP after snow leopard update

i've recently updated to snow leopard. and i'm running Final Cut Pro 6.0.6
i opened a .fcp project i created a long time ago. i tried to import a .aif file and final cut crashes. i converted the .aif file to a .mp3 file. tried to import it, and final cut crashed.
i then went and deleted the preference files for final cut pro, reopened final cut, tried importing both files again, it still crashes.
does anyone have a legitimate answer for why this is happening?

BenB wrote:
1st, FCP does not officially support MP3 audio files, so don't even use them. I'm running FCP 7 on Snow Leopard, no problems with audio files.
1- How are you encoding them? What software is creating these files?
2- Are you running on an external FW800 drive?
3- How much RAM are you running?
And as my final observation is, NEVER run Final Cut Pro 6 on Snow Leopard! Huge no-no! If you upgrade to Snow Leopard, only use FCS3. I've updated lots of systems for my students and clients, and I've seen lots of FCP6 on SL problems.
Message was edited by: BenB
I agree that you shouldn't use MP3 files with FCP, the manual tells you that somewhere If I recall properly, but it shouldn't cause Final Cut to crash, at least that has never been my experience, it has just caused a skipping problem, or not playing the complete song.
I don't really understand wht a FW800 drive or the amount of RAM have to do with it, it would sure be interesting to hear your comments on that.
However, in all due respect, to make the statement that one should NEVER run Final Cut Pro 6 on Snow Leopard seems pretty "out there" would you be so kind as to provide your rationale for such a drastic statement as that. Has there been anything official from Apple along those lines?

NokiaMServer and audio files watchup

I noticed that the NokiaMServer application opens and holds the audio files open. I was concatenating multiple audioclips into one single audio file in my music folder. The process ended after some time to a disk write error. After some retrys and disk checking I started to wonder if the resulting file was opened by some other process, because I couldn't delete or rename it. I found then ProcessExplorer, which pinpointed that NokiaMServer.exe was holding ny result file open. After killing the process the concatenation process went through with no problems. If you have had weird problems with audio files, and I assume that the same might happen also to image files as they are also watched by NokiaMServer, kill the process and retry.

Hey,
Cud u pls xpln ur issue in detail.... Ur operating system, exact step by step procedure etc.,
If my post helped you, click on Kudos button and if my solution provided is opt 2 u, accpt my solution

Random substitution of audio files

Hi,
I'm having a peculiar problem with audio files. When I had Express 7, clicking on a audion region brought up the sample editor for that region. When I do that in E8 I often get the audio file of a completely different track. Then, yesterday, I tried to solo a guitar audio track, and E8 played back a synth track even though the guitar track plays back just fine when not soloed. Anyone know what going on here or is this in need of a bug report? Thanks,
Rainguitar

Did you rename your home directory?

How to balance the right/left channel of a single audio file?

Hi, this might be an easy procedure but I cannot wrap my head around the following problem - an audio file, that I use as background music in one of my sequences, has uneven right and left channels - they need to be leveled.
How can i do this in PrPro or Soundbooth? I prefer to edit the channel levels of the original file before importing it into my composition. I work with CS5. So far, I've managed to level the R/L chanels by using the 'Balance' knob in the ProP "Audio Mixer" tab . The problem with this method is that the balnce knob adjust the balance of all audio files sitting on the same sound track, whereas I need to adjust the balance of only one of them. Many thanks.

There is a Balance effect as well.

Problems with Firefox 13. Can't see online audio file player. Video only works on some sites. All works OK in I.E. Updated Flash. No Change

Problems began when Firefox 13 automatically updated. tried downloading latest version of Flash 11.2.202.235. No change.
Video works sometimes on YouTube, not at all on most other sites.
Audio player not working at all. Either not even visible or downloads to real player versus playing within application such as Amazon.
Tried enabling/disabling Add ons to find culprit. No luck.
Everything as it should be in Internet Explorer.
On my WordPress site has MP3 audio files, and uses a flashplayer to display and play music files. With flash player on, nothing displays at all, (bank space where audio player would normally be displayed)
If I disable shock wave flash, a text link is displayed that downloads the MP3 in a new window (quick player), Also video doesn't work on any website. If I disable Flash and quicktime, text link to audio file downloads to realplayer.

hello msandman, there have been quite a few issues with adobe's latest flash update - can you try if flash content is showing up correctly again, when you disable the real-player components like mentioned in the following article: [[Flash 11.3 doesn't load video in Firefox]]?
otherwise you could also try to remove flash 11.3 from the windows control panel/programs section & [http://forums.adobe.com/thread/889580 downgrade to the 10.3 branch of the plugin], which is still receiving security updates.

I just moved my itunes library from a win 7 computer to a win 8.1 computer. Getting an error message "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can't play CDs or get audio file from web!

Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.

I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
However, I would also like to rent movie's from iTunes,
Would be great if iTunes would let you choose the output device, too, like most other applications using sound from Skype to Windows Media Player,...

Problem using text boxes as the "image" to drag and drop over audio file

I have been adding audio files to my page in iWeb (previous version, not '08), but I am having a problem giving them titles.
When you first drag a file from iTunes into iWeb, it provides a space for you to drag and drop a picture. The online iWeb guide also says that you can drag a text box there instead of a picture.
I created a text box with the text I would like to drop over the controller. However, it is no longer allowing me to drop the text box there. I used to be able to do this, and I don't know what I'm doing differently now. Any suggestions?
Thanks!
-- Will

foobar2000 with the ipod plugin will allow you to drag/drop FLAC files and when it syncs the ipod, it converts the FLAC files on the fly. MUCH better than dealing with the crappy iTunes interface and having to pre-convert the files. I absolutely loathe iTunes and it just gets worse and worse!

Unexpected problem: uncaught exception when working with audio files in Soundtrack Pro

Hey,
Whenever I double click an audio file in the timeline to work on it, I end up getting the Error message: "Unexpected problem: uncaught exception" and Soundtrack Pro eventually crashes. Also, this happens when I try to work with audio files in the file editor. I have Leopard and am using Logic Studio 8. Any insight would be much appreciated. Thanks
Matt

Didnt know how to remove the original clip from the STP arrange window - or whatever it's called in STPro. So I could go no further in my perverse science experiment.
It also appeared that I could only import an aif but not a wav?
I gave up on STPro and did what I needed to do in Logic, which I use regularly.
Thank you for folowing up on this.
PS. I used to use an old PowerPC version (1.0.3) of STPro and loved the way it visually showed the change in the waveform when you added each efffect. It appears that the new version (3.0.1) does not allow you to do this anymore? You can render or flatten the effects to see the final waveform, but then you are dead in the water and cant make changes?
Im such a newbie at STPro that I am probably not using it right?

Sequence Panel and CTI lock-up - Solved, problem due to 48kHz .wav audio files

Answering my own issue here, but maybe someone else will benefit as well...
PC, Windows 7
Upon opening an ongoing project I found the sequence panel and CTI were immediately unresponsive. The PC was also showing a high amount of background processing on the PrPro processes. I went back to a previous project version and everything was normal.
In the latest (problem) version I had added some VO to the sequence - audio .wav files encoded as 48kHz, 16bit.
I then renamed the audio file folder and reopened the newest project, causing PrPro to not find them and placed them offline. Everything returned to normal.
I then converted the 48kHz audio files to 44.1, 16bit and reopened the project, designating the new files to replace the old. Again, opeing the newest project, everything was OK and I was able to continue on.
It seems that the 48kHz files were causing PrPro to hard-loop in a background process in the indexing, conforming and peak file generation phase. I found when using the problematic project that the sequence panle adn CTI were actually responding, but only after a very long delay. An example would be to try to reposition the CTI with no response, then clicking play and stop in the playback window, then the CTI would update.

That is odd
When I do DV project with video that is digitized by my old Pinnacle DV500 card, the audio inside the DV AVI is always 48khz 16bit stereo... and I do, of course, create a project to match the files

Urgent!! Problems muxing .m2v files and audio!! MPEG Streamclip/Compressor

Hello!
I am under an urgent deadline to upload a short 6 min documentary clip for a client to review for screening this week. The footage was shot in 1080/60i HDV.
Usually, I find the best quality and fastest way to do this is to export directly from my FCP sequence using the '150 min Best Quality' DVD settings in compressor to get an .m2v video file and .ac3 audio file. Then I open the .m2v files in MPEG Streamclip which links it with my .ac3 file, then do 'Export MPEG with MP-2 audio". This gives me a single, muxed file that I can then upload to YouTube or Vimeo.
However, with this project, when I open up my .m2v file in MPEG Streamclip, it's recognizing the .ac3 file and I can see the info for it in the MPEG Streamclip window, but when I play the file in MPEG Streamclip or mux it, I don't hear any audio. Furthermore, after about 5 seconds into the clip, the playhead will continue moving, but the video will freeze, then maybe pick up again later. The .m2v video will play back smoothly in VLC player or Quicktime player, but not in MPEG Streamclip.
I've tried exporting different little sections of the timeline to see if maybe I had some corrupted footage or whatnot. I even exported a small clip from an older HDV project to test. But no matter where I export from, I am running into the same problem. I can bring the .m2v file and .ac3 file into DVD Studio Pro and burn a DVD with no problem, but I can't mux them. If I build the DVD file in DVD SP and try to open the .VOB file with MPEG Streamclip, I get the same problem. I even tried using a different software to mux (ffmpegX) but to no avail. When I try with ffmpegX, it either tells me I'm dropping frames, or if it works and it muxes it, when I open the MPEG file, it'll stutter at about 5 seconds in as well and I can't hear any audio, even though there is supposed to be audio in the muxed file.
I think I might have updated my Quicktime a few days ago with the system update, and maybe updated a few other things, so I don't know if this has any bearing on the problems I'm running into. But I was able just a few days ago to export HDV 1080/60i using this workflow without any problems.
I realize I have other export options, but this always seems to me to be the best quality and fastest way of doing it vs. encoding an H.264 which, on my machine is RIDICULOUSLY slow...I need to be uploading multiple versions of the cut to the client, and really need help! Thanks so much in advance!
J

what you want is an m2v program file. Export a reference copy from FCP (uncheck Make Movie Self Contained") That's very fast. Bring it into Compressor. In the settings panel find the MPEG-2 settings folder. Select Program Stream. Adjust to your liking and run. The audio and video will already be "muxed" when it's done and using compressor 3 you can set it to upload to YouTube, Mobile or similar sites.

Problem w/ audio files

Similar Messages

Maybe you are looking for