Problem w/ Duplicate PLD Template

Good day mentors,
I used Duplicate PLD Template to copy from a source PLD. In which now I have already have the correct design/configuration for client's lx300 printers. The problem I am facing now is that the source document or PLD was from Delivery(System). This pld defaults to printing 2 copies of the pld even if I set the new pld in which i copied from Delivery to print only one copy.
Steps:
1. Created customized Delivery PLD.
2. Copied customized Delivery PLD via "Duplicate Layout Template" into ARInvoice and Purchase Order
3. Currently printing 2 copies even if repetitive area has only 1 line item for the source and target documents.
Client is using a preprinted forms w/ tripilicate copies via dot matrix printer. Thus I want to remove the extra copies PLD is making by default.
If there is another link which answers this please post the link.
Thanks in advance,
Sean

Hi Gordon,
        Sorry. My mistake. I thought there was something wrong w/ the duplicate layout template of SBO, but in fact its a problem of the page size in that I need to adjust the height of the areas inside the pld.
        I am still fixing the pld, but I am certain that its the area height that's the problem.
Thanks,
Sean

Similar Messages

  • Copy PLD templates

    Hi all,
    I am trying to copy a PLD template from one DB to another.
    I am using the query that I found here on the forum:
    INSERT INTO [Target].[DBO].[RDOC]
    SELECT [Source].[DBO].[RDOC].* FROM [Source].[DBO].[RDOC]
    WHERE [Source].[DBO].[RDOC].DOCCODE = 'VPM10003'
    INSERT INTO [Target].[DBO].[RITM]
    SELECT [Source].[DBO].[RITM].*
    FROM [Source].[DBO].[RITM]
    WHERE [Source].[DBO].[RITM].DOCCODE = 'VPM10003' AND [Source].[DBO].[RITM].DOCCODE
    IN (SELECT DOCCODE FROM [Target].[DBO].[RDOC])
    I get the following error however and I havent been able to figure out why:
    Insert Error: Column name or number of supplied values does not match table definition.
    I would normally use the method of copying all the fields, but the 2 databases are on different patch levels so i cant log into the source DB in the normal way.
    Can anyone give me any suggestions as to what I may be doing wrong??
    Thanks and regards,
    John O'Brien

    Hi Suda,
    Thanks for quick reply.
    I will try to get this cust upgraded asap.
    Thanks again,
    John

  • Is it possible 2 copy PLD template

    Hi All,
      I created one PLD template and i want 2 copy the same matter to another PLD template is it possible in SAP B1 if so plz help me.....

    Hi
    When you copy the fields from a Sales Order PLD to an Invoice PLD, you will have to change the fields to 'point' to the correct tables. The Bill To for instance, must be changed to A/R Invoice - Bill To and the Document No field must be A/R Invoice - Doc No.
    Use the field index window to highlight each field and make all the neccessary changes (including the hidden fields).
    Daan

  • Create PLD template

    Hi All!
    How can I create new PLD template? Thanks

    Hi,
    You need to modify one of existing PLD template. Save a new name.
    Thanks,
    Gordon

  • Duplicate approval template

    Hello
    Is anyone familiar with a way to duplicate SBO Approval templates?
    Thanks
    Revital

    Hi.......
    There is no way to duplicate Approval Template unfortunitely....
    Regards,
    Rahul

  • Duplicate Layout Template error

    Hi,
    I have designed a print layout with Crystal Report (A/R Invoice) and now I would like to duplicate it and create a AR Credit Note layout, similar to Invoice layout.
    When I use th enew utility of sap 8.81 to Duplicate Layout Template (Administration -> Utilities), i'm able to duplicate the layout, but if I try to enter in the new layout with Crystal Report Designer to add a new field, i'm not able to find the AR Credit Note table (ORIN) and I'm not able to add the new field. If I use the new layout with no modify, all the data is correct, but if I want to add a new field I'm not able to do it. Is it a bug or I use a wrong procedure?
    Regards
    Marco

    HI,
    Alternate way you export AR Invoice report in PACKAGE, use same package to import but choose RIN (AR Credit Notes) and place with different name.
    Again go i n Administrator > Setup > General > Report and Layout >
    Edit presently added report and try to add new field on rpt.
    Hope this may work, please do with TEST database
    Thanks
    Kevin

  • Problems with Quote Printing template

    Hi,
    I have been trying to assign a custom PDF template to the Print Quote functionality within sales. However, when I try to create a template using Code: ASOPRINT, Application: Order capture, and Data Definition: Quote Printing I get the following message:
    "You entered a duplicate template entry. Please change the Name, Code and/or Application and reapply."
    I therefore tried to remove the original seeded xsl template by entering an 'end date' of yesterday, however this message still appeared but now no template is assigned to the print quote function within HTML quoting. Is there a way to get this back again or preferably add a new one - It appears the system is still recognising the ASOPRINT code from the seeded template despite its removal.
    Any help would be greatly appreciated
    Anjohn

    Hi,
    I could create another template to solve my problem. But according to the XMLP documentation, I studied that both the application code of Data definition and template should match. In my case my data definition and template has the same code ASOPRT. And I created another template with the code ASOPRINT. Both my templates work. Now, I am kind of confused. Can anyone help me in undersatnding this.
    Thank you,
    Sowjanya

  • Problem with duplicate and/or outlined fonts in Macintosh

    If you are using Frame for Macintosh and you find you have duplicate Arial and/or Times New Roman fonts, or, if these fonts show up on the screen as outlines, the problem may be that you have the 2.9x versions of these fonts, the latest as of this writing (31 August).
    You can find older 2.60 versions on the Apple OS 9.2 Install CD, deep in a Microsoft Internet Explore install folder (a Sherlock search will find them).
    DEAD LINK, LEFT HERE FOR HISTORICAL PURPOSES: In case you're interested, you can find the 2.9x versions at http://www.microsoft.com/mac/download/office2001/fontsupdate.asp. The page says "New Apple Macintosh versions of Times New Roman (2.91) and Arial (2.90) This update includes a fix for a problem that prevented certain characters from being printed on PostScript level 3 printers", so I'm hesitant to say that you should not use these newer fonts at all.

    i had been running the program inside Netbeans.
    Running the jar using the command line outside
    Netbeans i have no more problems... Does Netbeans use
    it's own JVM?Depends how you set it up, but look under the options. There are settings for the compiler and jvm that it uses.

  • Is this problem caused by a template error?

    Hi Everyone, I hope someone can help me.
    I'm integrating APEX with BIP to run some reports and generate PDF files. This issue wasn't happening before. It was working okay.
    This is our current running environment:
    APEX 3.2.0.00.27
    BIP 10.1.3.4.0
    Oracle DB Enterprise 10.2.0.3.0 64bit
    1. Each time I try to run my report from APEX, everything seems to be working okay but when the PDF file is opened I've got this error message:
    This file cannot be opened because it has no pages (Acrobat Reader).
    2. If I open my template using BIP Desktop for Word, when I try to preview a PDF file based on my loaded data I've got these error messages:
    ConfFile: C:\Program Files\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\config\xdoconfig.xml
    Font Dir: C:\Program Files\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\fonts
    Run XDO Start
    Template: C:\BIP\Letter - Request for Commonwealth Support.rtf
    RTFProcessor setLocale: en-us
    FOProcessor setData: C:\BIP\x.xml
    FOProcessor setLocale: en-us
    java.lang.ArrayIndexOutOfBoundsException: 0
         at oracle.apps.xdo.common.image.ImageReader.checkFormat(Unknown Source)
         at oracle.apps.xdo.common.image.ImageReader.analyze(Unknown Source)
         at oracle.apps.xdo.common.image.ImageReader.load(Unknown Source)
         at oracle.apps.xdo.generator.pdf.PDFGenerator.createPDFImageReference(Unknown Source)
         at oracle.apps.xdo.generator.pdf.PDFGenerator.createPDFImageReference(Unknown Source)
         at oracle.apps.xdo.generator.pdf.PDFGenerator.getImage(Unknown Source)
         at oracle.apps.xdo.generator.ProxyStreamGenerator.getImage(Unknown Source)
         at oracle.apps.xdo.template.fo.area.AreaTree.getImage(Unknown Source)
         at oracle.apps.xdo.template.fo.area.GraphicArea.init(Unknown Source)
         at oracle.apps.xdo.template.fo.area.GraphicArea.<init>(Unknown Source)
         at oracle.apps.xdo.template.fo.elements.FOExternalGraphic.doLayout(Unknown Source)
         at oracle.apps.xdo.template.fo.elements.FOInline.doLayout(Unknown Source)
         at oracle.apps.xdo.template.fo.elements.FOInline.doLayout(Unknown Source)
         at oracle.apps.xdo.template.fo.elements.FOBlock.doLayout(Unknown Source)
         at oracle.apps.xdo.template.fo.elements.FOBlock.doLayout(Unknown Source)
         at oracle.apps.xdo.template.fo.elements.FOBlock.doLayout(Unknown Source)
         at oracle.apps.xdo.template.fo.elements.FOFlow.doLayout(Unknown Source)
         at oracle.apps.xdo.template.fo.elements.FormattingEngine.startLayout(Unknown Source)
         at oracle.apps.xdo.template.fo.elements.FormattingEngine.run(Unknown Source)
         at oracle.apps.xdo.template.fo.FOHandler.endElement(Unknown Source)
         at oracle.apps.xdo.common.xml.XSLTHandler$EEEntry.sendEvent(Unknown Source)
         at oracle.apps.xdo.common.xml.XSLTMerger.startElement(Unknown Source)
         at oracle.xml.parser.v2.XMLContentHandler.startElement(XMLContentHandler.java:167)
         at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1182)
         at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
         at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
         at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:149)
         at oracle.apps.xdo.template.fo.FOProcessingEngine.process(Unknown Source)
         at oracle.apps.xdo.template.FOProcessor.generate(Unknown Source)
         at RTF2PDF.runRTFto(RTF2PDF.java:629)
         at RTF2PDF.runXDO(RTF2PDF.java:439)
         at RTF2PDF.main(RTF2PDF.java:289)
    I haven't changed anything in my template and BIP Server configuration hasn't been changed as well. To me, it seems that we have a problem with the template or with Java calling some methods to access BIP Server.
    I hope someone can point me out in the right way to fix this issue.
    Cheers,
    Gio
    Edited by: user2607704 on Apr 2, 2009 1:09 PM

    Are you using a dynamic image in your report? Like an image that comes from a CLOB or BLOB in your database? If so, are you sure it is base64 encoded?
    I'm having a very similar problem. I get the error when using an image bigger than 6KB (8KB after base64 encoding). It seems APEX cuts the end off of values too big for it's liking (total generated XML for the row should not exceed 32K I suppose).
    The errormessages I get when using a non base64 encoded clob or an image that's bigger than 6KB are the same as yours.

  • Problem In Query PLD

    Hi All
    We have problem while generating the query pld in SAP B1 2005 PL 34. We have given query for Goods Receipt PO with batch/serial no details. The details of batch no and serial no is working properly. When we execute the query if query pld comes to second page it is not displaying the details of GRN PO no, date, etc...
    Our customer require GRN PO details in the suceessive pages. How to achieve this?
    Thanks in Advance

    hi Consultant,
    Where did you put the GRN PO No, Date and Details?
    Did you Use of Group by method in Repetetive Area (or) Repetetive Area Footer?
    Do you want GRN PO No., Date and Other GRN Details in Header Level?
    Try this,
    1. Select GRN No. in Row Level and Copy (GRN No.) Field ID on Properties Area Window.
    2. Create 1 Formula Field in Page Header and Put GRN No. Field ID.
    Regards,
    Madhan.
    Edited by: Madhan Babu C on Aug 3, 2009 1:36 PM

  • PLD Template

    Hi All,
    In the Layout Designer window we can select different document types.
    If i select Sales and Purchase Register it displays the  Sales and Purchase Register report in the template list below.
    I would like to know where this  particular report is linked with the document.
    OR
    How can I know which document is attached with which Report template ?

    The Tables related to PLD document templates are RDOC and RITM.  When you set a PLD as default for a user or BP, then entried are created in RDFL tables.  You can also check RTYP.
    If I have more info I will post it.
    Suda

  • Problems with duplicate fonts

    The other day I was looking into "Font Book.app" and notice I had a few duplicates so I removed them. Now I have a few applications that don't work, like Zino (Magazine reader) it unexpectedly quits. So I contact Zino and they ask me to send them the first part of the report that generates an application when it unexpectedly quits. And they notice I had no Arial font activated. The problem is that I do have the Arial font in my "Font Book" application but I guess is the duplicate Arial font that the application is looking for. My question is how can I get this duplicate fonts back?
    Blue skies and happy new year!
    Jerry

    how did you deactivate those fonts? did you use Font Book or did you manually delete the fonts? if the former, then reboot once in safe mode. reboot and hold shift at the chime. once you boot in safe mode reboot again and log in normally. this will clear your fonts cache and all you inactive fonts will be reactivated.

  • Problem uploading web content (Templates) developed in DW CS6 and Liquid layouts

    Hi
    I have developed some templates in Dreamweaver CS6 and Liquid Layouts
    However when I want to preview them in a browser, they come out blank (No Data at all)
    I have tried this without Liquid and works fine, minor bugs that can be fixed like background image not visible
    It seems the problem its at the BC system
    Will appreciate help on this matter
    Thanks

    Mario, person made the same thread 4 times now:
    http://forums.adobe.com/thread/1099238
    Just keeps posting the same post in a new thread over and over.

  • Problems using the 'stationery template' feature in mail

    I have used the stationery templates feature in mail without any problems in the past. Now when i send a stationery template, like a photo template, the email is unreadable for the people receiving my emails (both Mac & PC). Sometimes the email looks like a Picasso painting or the receiver gets a bunch of attachments as if the email came in a bunch of separate files. Could this be possible due to the upgrade to 10.6 from 10.5? Or am i doing something wrong? Is there a separate upgrade for this?
    thanks

    I have used the stationery templates feature in mail without any problems in the past. Now when i send a stationery template, like a photo template, the email is unreadable for the people receiving my emails (both Mac & PC). Sometimes the email looks like a Picasso painting or the receiver gets a bunch of attachments as if the email came in a bunch of separate files. Could this be possible due to the upgrade to 10.6 from 10.5? Or am i doing something wrong? Is there a separate upgrade for this?
    thanks

  • Reinstalling iTunes, problem with duplicates

    I have an iMac 2GHZ running OS X v10.5.7 which is having multiple longstanding problems with freezing/errors and no significant problems show up after running disc utilities (repairing permissions etc..) or Tech Tool. Also my itunes music folder is full of duplicates that don't show up on my i tunes duplicate or "Dupin" duplicates list. iTunes library shows 43 GB space used and iTunes Music folder shows 95 GB space used.
    I would like to start from scratch, reformat my hard drive and reinstall iTunes to see if it solves most of the problems. I am using Time Machine for backup but also can make a bootable clone with Super Duper. I wonder if it would be better to restore my iTunes from an iPod since none of the duplicates exist there.
    Suggestions?
    Thanks,
    B

    a lot of people are having similar problems
    a temporary solution i discovered is desribed on this thread
    http://discussions.apple.com/thread.jspa?threadID=658807&tstart=15

Maybe you are looking for