Problem w/FB2 Mac OS X Design mode

Can not switch to design mode w/o getting this error message
""An unknown item is declared as the root of your MXML ". This msg
pops up even with a new file generated by the builder wizard. This
bug doesn't exist on winXP with the same file, so this seems to be
a Mac version issue.
thx

Hi, I'm having a similar problem to Dirk. I'm setting up Leopard server on a brand new Mac Pro that won't boot from the server DVD which only has 10.5.4. I found the article that Tony mentions, and this method does indeed allow the server software to install over the client OS. The procedure did get through to the end on each occasion I've followed it though, with no black screen or crash.
But - like Dirk found - some of the usual "server assistant" questions just don't show up.
The "TCP/IP Connection" page is a no show and the "Network Names" page doesn't show either. I'm particularly concerned about this latter page being missing as I'm not sure how to enter the primary DNS name after the install has completed.
I tried the Apple KB article's method again in case I'd missed something - and this time I made sure that the ethernet port was configured with a static IP at the client stage before introducing the server DVD (I'd left it on the default DHCP setting on my first attempt).
Can anyone tell me the correct way to enter the primary DND name for the server AFTER the server assistant has finished up please? Or another way to do this "server over client" install?
One other thing I noticed after each install attempt was that - upon launching Server Admin for the first time - the NFS service was active. Usually no service is active at launch. This fact along with the Apple article's note about kerberos makes me worry about what else is different when this type of server over client install is performed.
Thanks for any pointers,
Paul

Similar Messages

More design mode problems

I've been down this road before but now it's getting just crazy. I can't get work done if I want to create a simple layout. I've created new workspaces, cleaned, everything I can think of including taking out any third-party components that might possibly be compiled in non 4.5.1 (though they supposedly have).
I try to create a simple MXML component. If it's based on anything visual (e.g., panel) or if I start with a group and then drag in a panel, I just get the little computer icon with red x on it in design mode with the following errors in the Design Mode Problem panel. I mean, this is just a new, empty component.
Assets failed to compile.
Design Mode is unable to display the document styles, skins, and images because the following assets have failed to compile:Details
:Unable to resolve resource bundle "components".( - Line:-1)
Unable to resolve resource bundle "skins".( - Line:-1)
Unable to resolve resource bundle "core".( - Line:-1)
Unable to resolve resource bundle "core".( - Line:-1)
Unable to resolve resource bundle "effects".( - Line:-1)
Unable to resolve resource bundle "layout".( - Line:-1)
Unable to resolve resource bundle "styles".( - Line:-1)
Unable to resolve resource bundle "components".( - Line:-1)
Unable to resolve resource bundle "core".( - Line:-1)
Any ideas?

I thought I had it by deleting a namespace reference; things started to render and all was good for a couple minutes. Then it reverted to the same problem so I'm open to other suggestions.

Design mode locale problems with 4.5.1

I tried this in the Flex forum but no answers. I'll try here. I've been working on a project for a year that has worked fine. I upgraded to 4.5.1 and now can no longer edit several of my components that were localized. I solely get a red X and a design error that says "Assets failed to compile. Design Mode is unable to display the document styles, skins, and images because the following assets have failed to compile:Details :unable to open 'locale/en_US'(command line - Line:-1)"
I've a folder with locale/en_US and it actually localizes fine if I run the app, but I can not longer edit in design mode which, as you might guess, really puts a damper on moving objects by pixels.
Any suggestions?

I don't have a solution, but i think i pinned the circumstance down to being generated when:
You have a localised project
You also embed a generic (non-localised) asset
In the case I used to file a bug report, including/removing an <s:Image> tag causes/removes the problem:
https://bugs.adobe.com/jira/browse/FB-32609
Note: In my builder I had an additional issue making it difficult to pin down - in that once the Design Mode Problem had been raised, even reverting the line of code that caused it didn't clear the problem report - took a couple of odd steps:
https://bugs.adobe.com/jira/browse/FB-32610
Message was edited by: creacog - fix typo

Problem with query design mode?

hi friends,
how are you, i created query, i have customer and material and price&quantity.
i have some values corresponding objects.
i click design mode and inserted drop box for material , and again exit design mode, i got drop box with my material.
in drop mox i have 5 material. when i select material 3 the query is not showning values for material 3 . its showing all values . what can i do for this.
regards
suneel.

Judging from the error message, I'd suspect that IIS is trying to use some authentication service for the user. Are you using something like a "single sign-on" (Windows NT native authentication, NDS authentication, etc.?
As a test, you could try downloading the Oracle OLEDB driver to see if that solves the problem.
Unfortunately, nothing jumps out at me here as obviously wrong or an obvious path to getting this working.
Justin Cave
ODBC Development

SWC Load Error - Design Mode Problem

Hi,
I'm loading custom .swcs into my Flash Builder (4.5 Burrito) project and I get these errors. These will only appear in design mode (not in source mode) and will not be labelled under the Problems tab, rather the Design Mode Problems tab:
SWC Load Error
SWC file failed to load. Any component dependent on this SWC file will not be displayed in the Design Mode.
The SWC may have failed to load because of:
* Incompatible definitions caused by usage of a different SDK version
* Missing referred class definitions
I don't think this problem is caused by an SDK incompatibility, as all these swcs have been created under flex 4 and I'm pretty sure under the 4.5 SDK.
Loading the components contained in these swcs onto my canvas (at design time) will work fine. I'm able to build and run the application without any errors caught by flash builder.
Any idea how to fix this problem, or what it means?

SWC Load error indicates that the swc used does not match with the definitions present in design view or with what is present in already loaded other lirbaries. The issue is reported by the flash loader. It looks like that, your swc is compiled with a previous version of the sdk and the design view and the related definition correpsonds to another version.
The incompatability logic is not in DV. When DV tries to load all the swc details available in the project, the loading fails as the loader reports the issue. There is hardly anything, we can do here from DV. If the player reports the incompatability issue, the loader is corrupted and all further loading is ignored. So to avoid such issue, DV ignores the failed swc's and tries to proceed.
If you pass me the swc , I can give the details of the incompatability. Ideally between 4.5 and 4.5.1 there should not have been any incompatability. However your case shows there is. You can contact me at [email protected]

Problem with Flex Beta3 and Design mode

Hi
I’ve installed de Flex beta 3 version and Flex exit the
programm with an error feed back :
VM terminated. Exit code=1 and many others parameters when I
click on the Design button mode.
System Vista Pro, 32 bits, french version, 4Go of RAM, video
: NVIDIA GeForce 8600M GT
Thanks

Hi,
I've been having this same issue: Open Flex 3 milestone 4
--> Create New Project --> Click Finish --> Click on the
Design Mode Tab --> Crash!
I've checked the error log and my name only has the
characters: (1, a, e, n, p, y). None of these, from what I can
find, are
high ASCII or 2-byte characters.
Here
is a screenshot of the error message/window that comes up.
Here is the
error log that is generated. (I'm not sure if there is more
info in this than I should be posting, please let me know if i
should remove this).
Anyway, this error is pretty frustrating and is causing me
some substantial grief at work. Any help and/or tips would be
appreciated.
Thanks,
-Tom

Design Mode Problem

Every time I go to the Design mode with my Application JDEV crashs !
Some time I get this message.
JniPortal for C:\Program Files\Oracle\JDeveloper 3.1.1.2\java1.2\jre\bin\OJVM\jvm.dll reported
javax/swing/JMenu
java.lang.NoClassDefFoundError: javax/swing/JMenu
void javax.swing.SwingUtilities.updateComponentTreeUI0(java.awt.Component)
void javax.swing.SwingUtilities.updateComponentTreeUI(java.awt.Component)
boolean borland.jbuilder.uidesigner.DesignerAddin.activate(borland.jbuilder.cmt.CmtComponentModel, borland.jbuilder.cmt.CmtModelNode, borland.jbuilder.cmt.CmtModelNode, borland.jbuilder.designer.DesignContext)
borland.jbuilder.designer.Designer borland.jbuilder.designer.DesignContext.edit(borland.jbuilder.cmt.CmtModelNode)
void borland.jbuilder.designer.DesignContext.open(borland.jbuilder.addin.Url, boolean)
void borland.jbuilder.designer.DesignContext.changeUrl(borland.jbuilder.addin.Url)
void oracle.jdeveloper.addin.impl.JavaMasterViewerImpl.changeViewerUrl(java.lang.String)
void oracle.jdeveloper.addin.CustomViewer.changeUrl(java.lang.String)
void oracle.jdeveloper.addin.JavaMasterViewer_JavaDispatch.invoke(int, borland.javaport.JavaCallStack)
null

"java.lang.NoClassDefFoundError: javax/swing/JMenu"
Did you add the swing library to the list of libraries used by the project? (double click on the .jpr file in the upper navigator window, click on the library tab)
Is swing 1.1.1 there? If you, add it via the Add button.

Cannot load Design mode flash builder 4 preminum trail version

Hi
I installed flash builder4 premium trail version .After creating project when i click on the design mode . It displays an alert box containg the message like cannot load design mode with title as outof memory . How can slove this problem.
Here i attached the image file.
Thanks in advance
Regards
ss

sss999sss, Dezoris, ypeng, GJam564: Can you guys reproduce the issue still?
When you can, please comment on this bug http://bugs.adobe.com/jira/browse/FB-25594 and attach your error log from your workspace
Win: C:\users\you\Adobe Flash Builder 4 Plug-in\.metadata\.log
Mac: /Users/you/Documents/Adobe Flash Builder 4 Plug-in/.metadata/.log
It would be helpful to know if this is limited to a particular MXML file or if it also reproduces in an empty Application.
Also, just to be sure, try to reproduce this bug a new workspace:
1) File > Switch Workspace > Other...
2) Specify a new folder
We'll continue to follow up on FB-25594. Again, please post your log and platform (mac/win, memory, etc.) information on the bug.
Jason San Jose
Software Engineer, Flash Builder.

Edge poster image no longer visible in design mode

Just updated to Muse 2014.3
In design mode the preview of Edge Animations has been replaced with the "Eg" icon.
The animations works just fine but it is more difficult to place them properly without a preview image.
I checked the Edge Animation file to make sure that the poster image was selected.

Yes, it came down to something corrupted with OS X as suddenly I started getting the long grey progress bar every time I booted OS X (no problems when booting Windows 7 on the Boot Camp partition).
Disk Utility could not repair it and for some reason I couldn't boot off a USB drive that I had setup as a recovery drive, so I couldn't repair it via Disk Warrior nor TechTool (I misplaced the boot DVDs over the years of moving).
Since this was my laptop that I only use when I'm on the road, all my important information was synced to my desktop Mac so I just started over and reformatted the entire hard drive and reinstalled everything (it gave me the opportunity to try out 10.7 preview release on a clean install as well as I wanted to upgrade from 32-bit to 64-bit Windows 7 anyways) and now everything works fine, including Target Disk mode.

Webfont not displaying properly in design mode or appearing in font list

Just updated Muse and now my heading webfont (Nunito) is not displaying properly in design mode or appearing in the font list. It is, however, displaying properly in preview mode. When I try and delete the font and then add it again I get an error message that says the font can't be added. Any idea what's going on?

Hello,
Please try the steps below. Hopefully this will fix the problem.
1. Close Muse
2. Rename the folders named tk1 and tk2 in the following locations
On Windows: %appdata%\com.adobe.AdobeMuseCC.2014.2\Local Store. You can type this in the Path bar at the top of the Windows Explorer window
On Mac: ~/Library/Preferences/com.adobe.AdobeMuseCC.2014.2/Local Store. You can type this in the Go To Folder dialog (Shift+Command+G)
3. Launch Muse and add the font again
Please let me know if that helps.
Regards
Vivek

DW89 Design Mode Disappears

I am using Dreamweaver 8 for Mac (from Studio *) on a G-5,
2,5 dual. Version of DW is 8.2
When updating content in an existing site, on a rather long
page, I found that the lower half of the page simply disappeared. I
could not bring it on the screen in design mode. The HTML was
there, but nothing in design.
I finally switched back to MX version and was able to see the
entire page and finish my work.
Anyone experience similar problem?
Any suggestions?

Nice workaround, David!
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"David Alcala - Adobe" <[email protected]>
wrote in message
news:edsoo7$lj8$[email protected]..
> See if this workaround helps:
>
> Change the Set Magnification pop-up menu in the lower
right corner of the
> Document window to 99% or 101%. You can type these
values directly into
> the Set Magnification pop-up menu. For more info on Set
Magnification,
> see this page:
>
>
http://livedocs.macromedia.com/dreamweaver/8/using/gs_02_b6.htm
>
>
> --
> David Alcala
> Adobe Product Support
>

DESIGN MODE: VERY SMALL FONT SIZE

WE just bought CS3 and when I open my Dreamweaver 8 html
files the font sizes are all over the place. I use size 2 for my
titles and size 1 for some of my copy. While in Design mode, the
size 2 type is not readable. I checked my settings and everything
is accurate. Funny thing is...when I preview in my browser the page
is fine. I have built 5 divisional websites and I'm on the last
one! I have been using these settings for years and now I can 't
edit unless I use the magnifying glass. Is this a bug in CS3?
Anyone else have this problem?
I initially created these on a Mac in DW8, and we just
switched over to PC's when we got the CS3. I don't see where this
should be a problem since I have worked on these sites on both
platforms. ANY HELP WOULD BE APPRECIATED!!!!
Thanks
E

Seems this problem is not just affecting me!
For a unsupported solution see this message:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=12&catid=189&threadid =1269482&enterthread=y

Huge discrepancy between design mode and exported html.

I added some html from videojs.com to my adobe muse website. As long as I put this video to the left of the website there is no problem, but when I put it more to the right the footer moves along with it. This ONLY happens when I export the page, this does not happen in DESIGN mode in muse itself. Can anybody please help me with this problem?

Hi Parikshit,
The sticky footer sounded promising, but it didn't change anything. I still can't move those bottom toggles to be at the desired ruler mark.
As for the margins... Its my understanding that whatever you have in a master page will be applied to the pages you assign, but the content and spacing is different. There is no content that would push the page to extend further down, which I have seen done before. And because I cannot individually move the toggles I have no way of adjusting the spacing. I am going for a seamless look between pages, where the size and content of the page remains the same while the images in my portfolio change.
Even if I go to Page > Page Properies and try to enter the correct numbers, it still doesn't affect the page.
Does that clarify?
Also, I am running 7.1 on a Mac OS 10.9...does that have something to do with it?
Thank you so much for responding!
- Carly

Eclipse +flex 3 plugin crashes when trying to see mxml file in design mode

Hi,
I have strange problem I've been struggling with for 3 days.
I have eclipse-jee-europa-fall2-win32(eclipse europa 3.3.1.1)
+ adobe flex 3 eclipse plugin.
My workspace consists of several projects + one library.
There is not problem when trying to edit any mxml file when
my library is not imported yet. Once I import it to my workspace I
cannot see any mxml file in design mode since it crashes with the
following msg in log:
Did anyone have similar problem and maybe knows the
solutiuon? I've reinstalled/redownoaded eclipse, flex plugin, flash
players and so on. What's more it happens only on my machine - same
project on different one works without crushing.
!ENTRY org.eclipse.osgi 2 0 2008-02-22 09:13:18.046
!MESSAGE While loading class
"org.eclipse.mylyn.tasks.ui.TasksUiPlugin", thread
"Thread[main,6,main]" timed out waiting (5000ms) for thread
"Thread[Worker-0,5,main]" to finish starting bundle
"update@plugins/org.eclipse.mylyn.tasks.ui_2.1.0.v20070927-0900.jar
[313]". To avoid deadlock, thread "Thread[main,6,main]" is
proceeding but "org.eclipse.mylyn.tasks.ui.TasksUiPlugin" may not
be fully initialized.
!STACK 0
org.osgi.framework.BundleException: State change in progress
for bundle
"update@plugins/org.eclipse.mylyn.tasks.ui_2.1.0.v20070927-0900.jar"
by thread "Worker-0".
at
org.eclipse.osgi.framework.internal.core.AbstractBundle.beginStateChange(AbstractBundle.j ava:1141)
at
org.eclipse.osgi.framework.internal.core.AbstractBundle.start(AbstractBundle.java:258)
at
org.eclipse.osgi.framework.util.SecureAction.start(SecureAction.java:400)
at
org.eclipse.core.runtime.internal.adaptor.EclipseLazyStarter.postFindLocalClass(EclipseLa zyStarter.java:111)
at
org.eclipse.osgi.baseadaptor.loader.ClasspathManager.findLocalClass(ClasspathManager.java :417)
at
org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.findLocalClass(DefaultClassLoade r.java:189)
at
org.eclipse.osgi.framework.internal.core.BundleLoader.findLocalClass(BundleLoader.java:34 0)
at
org.eclipse.osgi.framework.internal.core.SingleSourcePackage.loadClass(SingleSourcePackag e.java:37)
at
org.eclipse.osgi.framework.internal.core.BundleLoader.findClassInternal(BundleLoader.java :405)
at
org.eclipse.osgi.framework.internal.core.BundleLoader.findClass(BundleLoader.java:369)
at
org.eclipse.osgi.framework.internal.core.BundleLoader.findClass(BundleLoader.java:357)
at
org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass(DefaultClassLoader.jav a:83)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
at
org.eclipse.mylyn.context.ui.ContextUiPlugin$5.run(ContextUiPlugin.java:258)
at
org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
at
org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:123)
at
org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:3659)
at
org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3296)
at
org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2389)
at
org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2353)
at
org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2219)
at
org.eclipse.ui.internal.Workbench$4.run(Workbench.java:466)
at
org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:289)
at
org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:461)
at
org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at
org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:106)
at
org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:169)
at
org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:106)
at
org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:76)
at
org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:363)
at
org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:176)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native
Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown
Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown
Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at
org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:508)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:447)
at org.eclipse.equinox.launcher.Main.run(Main.java:1173)
at org.eclipse.equinox.launcher.Main.main(Main.java:1148)
Caused by:
org.eclipse.osgi.framework.internal.core.AbstractBundle$BundleStatusException
... 40 more
Root exception:
org.eclipse.osgi.framework.internal.core.AbstractBundle$BundleStatusException
at
org.eclipse.osgi.framework.internal.core.AbstractBundle.beginStateChange(AbstractBundle.j ava:1141)
at
org.eclipse.osgi.framework.internal.core.AbstractBundle.start(AbstractBundle.java:258)
at
org.eclipse.osgi.framework.util.SecureAction.start(SecureAction.java:400)
at
org.eclipse.core.runtime.internal.adaptor.EclipseLazyStarter.postFindLocalClass(EclipseLa zyStarter.java:111)
at
org.eclipse.osgi.baseadaptor.loader.ClasspathManager.findLocalClass(ClasspathManager.java :417)
at
org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.findLocalClass(DefaultClassLoade r.java:189)
at
org.eclipse.osgi.framework.internal.core.BundleLoader.findLocalClass(BundleLoader.java:34 0)
at
org.eclipse.osgi.framework.internal.core.SingleSourcePackage.loadClass(SingleSourcePackag e.java:37)
at
org.eclipse.osgi.framework.internal.core.BundleLoader.findClassInternal(BundleLoader.java :405)
at
org.eclipse.osgi.framework.internal.core.BundleLoader.findClass(BundleLoader.java:369)
at
org.eclipse.osgi.framework.internal.core.BundleLoader.findClass(BundleLoader.java:357)
at
org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass(DefaultClassLoader.jav a:83)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
at
org.eclipse.mylyn.context.ui.ContextUiPlugin$5.run(ContextUiPlugin.java:258)
at
org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
at
org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:123)
at
org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:3659)
at
org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3296)
at
org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2389)
at
org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2353)
at
org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2219)
at
org.eclipse.ui.internal.Workbench$4.run(Workbench.java:466)
at
org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:289)
at
org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:461)
at
org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at
org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:106)
at
org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:169)
at
org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:106)
at
org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:76)
at
org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:363)
at
org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:176)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native
Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown
Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown
Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at
org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:508)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:447)
at org.eclipse.equinox.launcher.Main.run(Main.java:1173)
at org.eclipse.equinox.launcher.Main.main(Main.java:1148)
!ENTRY org.eclipse.help 4 0 2008-02-22 09:18:14.375
!MESSAGE Required attribute "label" missing from "topic"
element in "/com.adobe.flexbuilder.help/tocAPI.xml" (skipping
element)
!ENTRY org.eclipse.help 4 0 2008-02-22 09:18:14.375
!MESSAGE Required attribute "label" missing from "topic"
element in "/com.adobe.flexbuilder.help/tocAPI.xml" (skipping
element)
!ENTRY org.eclipse.help 4 0 2008-02-22 09:18:14.375
!MESSAGE Required attribute "label" missing from "topic"
element in "/com.adobe.flexbuilder.help/tocAPI.xml" (skipping
element)
!ENTRY org.eclipse.help 4 0 2008-02-22 09:18:14.375
!MESSAGE Required attribute "label" missing from "topic"
element in "/com.adobe.flexbuilder.help/tocAPI.xml" (skipping
element)

I've found solution by myself so I'll present it here. Maybe
someone will need it.
The problem of such behaviour was that Flex plugin always (at
least on my pc) wants to ustart eclipse using its own JRE from here
C:\Program Files\Adobe\Flex Builder 3 Plug-in\jre (default dir).
This environment is Java 5. When you go to
eclipse>window>preferences>Java>Installed JREs and you
delete default Flex JRE, add new to point to for example C:\Program
Files\Java\jre1.6.0_04 eclipse still uses JRE from C:\Program
Files\Adobe\Flex Builder 3 Plug-in\jre. Do not know why
Flex/eclipse does that but if you simply overwrite C:\Program
Files\Adobe\Flex Builder 3 Plug-in\jre files with newer JRE from
C:\Program Files\Java\jre1.6.0_04 all works perfectly.
Hope it helps somebody ;-)
thanks Artur

Dreamweaver 8: Java script in Design Mode

Mac OS 10.4.11 Dreamweaver 8
I have a web page with a java script that displays a random picture from a list of images each time you reload the page.
http://www.irises.org
It renders fine when viewed in a browser, but the image does not display when viewed in Dreamweaver Design mode. The random image does not display and lacking the image other things are out of place.
The script that sets up the image array:

The code (further down the page after the all the list elements) that generates the image:
           <SCRIPT LANGUAGE="JavaScript">



</script>
Is there a way to get it to display correctly in the Design mode?
Thanks
<br />
</script>

Is there a way to get it to display correctly in the Design mode?
I don't think so, at least not with this script. What you need is for an image to be displayed on the page by default, and for the javascript to only change the src attribute's value. Something like this -
At the point where you want the image have -
<img src="the_path_to_some_default_image.jpg" id="rotation" />
and in the javascript, change this -
document.write('<img src="'+theImages[whichImage]+'">');
to this -
document.getElementById('rotation').src='theImages[whichImage]';
See if that works....

Problem w/FB2 Mac OS X Design mode

Similar Messages

Maybe you are looking for