Problem when a dot key
when i push in the dot key it not write
Any chance you might be typing too hard and it broke? Happened to my father's keyboard.
Similar Messages
-
Problem when add Chroma Key filter to DVCPRO HD
I ingested some DVCPRO HD 720Pn footage into FCP. The footage was shot against a green screen. I started by creating a 4-point garbage matte around the person and then I added Color Smoothing and when I add the Chroma Key filter, the green screen comes back and a large grey area appears on screen. What is going on?
Ok, I just tried it again by creating the 4-pt matte and as soon as I drag the Chroma Key Filter to the clip, the points disappear, and the entire green screen comes back. Is this the way it is supposed to behave? Is there some type of apply button that I need to select after adjusting the last point of the garbage matte before doing anything else?
Thanks!
Message was edited by: rick.pearl -
Problems with using Option key when starting up
I have 3 internal drives using a PCI card (2 slots) that allows me to use large drives with more capacity than stock allowance on my G4 Quicksilver 867 mhz 1.5 GB RAM tower.
All drives are Seagate Baracudas ATA: 2-400GBs and 1-200GB. I bought the 400s at the same time.
My main drive has OSX 10.4.11 (#1), and it is backed up to Baracuda #2 (400GB) which is a slave to my Main drive (using SuperDuper All files for a mirror bootable copy). The 3rd drive has Leopard 10.5.1 for learning and trying Leopard.
On the second PCI slot is the smaller 200GB Baracuda.
After backing up using SuperDuper (Main to #2) as a mirror, I see #2 in the Apple > Prefs > Start Up Disk.
After the first backup I can see all 3 drives when using Option key at startup, but instead of seeing the names of each drive under the normal hard disk icons, #2 has a SCSI icon underneath the hard drive icon, it's name (Mac BU) is missing and I can't start up to it. The other #1 and #3 looked as expected. I chose #1, it launched, fine.
On second backup, #2 is still in Prefs > Start up Disk panel, but this time doesn't show up on when using the Option key at start up. I have replicated this, but erasing #2, rebacking up twice.
With only the #1 and #3 drives showing at start up with Option key and #1 selected in the Start up Disk panel, I chose #3 (Leopard) in the Option window view, and my G4 froze at the gray apple screen. I hard shut downed, powered up and the G4 defaulted to Main (10.4.11)
I selected #3 Leopard in Prefs > Start Up Disk, restarted OK.
I restarted with the Option key (only #1 and #3 show) and now my main drive didn't have it's name only the SCSI icon under the normal hard disk icon like #3 was doing. UGH!
Nervously, I chose #3 with Leopard and the G4 started up to it OK.
I then reselected my Main #1 drive in the Start Up Disk panel, restarted to #1 OK.
OK, problems summary:
1) I can't use SuperDuper to create a blessed bootable #2 drive at Option start up, but I mention this for more info about a possible problem at Option startup, more than I want comment on SuperDuper potential bug / conflict.
2) I didn't try choosing #3 in the Start Up Disk panel, as I was affraid the G4 would freeze and then I might not be able to select either of the other #1 or #3 at Option start up as something is wrong with using Option key start up, and #3 would have been selected in Start Up Panel, which I was afraid I might not be able to get to again.
2) When I start up either of #1 or #3, I get momentary black screens after the gray apple screen at Option key start up and then again after the apple progress bar. This doesn't happen when I start up directly either drive when the drives are selected using the Start Up Disk panel
When using the Option startup, I am experiencing the above problems.
Whew, I know, but does anyone have any input and fixes?
Thanks, in advance,
StevenHi Dave.
Well... good news / bad news
Turns out, I have an Acard 6280M and have 3 drives connected to it as mentioned (#1 & 2 are mirrored using SuperDuper with 10.5.1, #3 is a clean install off a new Apple OSX disk 10.5, then updated to 10.5.1)
I also have a Firewire external drive, that I used SuperDuper to make it a mirror of #1, using the same procedure backing up #1 to #2, to test SuperDuper.
The firmware update directions tells you to start up off a drive not on the PCI card, I used #4.
While running off #1, I selected #4 in the Start Up disk pref and it booted OK! This seems to rule out SuperDuper being the problem - of creating a mirror from #1 to #2 (both on the Acard) and then not seeing #2 in the Option key boot screen.
I applied the firmware, which directs you to first update the Acard driver to 2.06, which is included in the folder with the firmware updater.
I did this and then applied the firmware updater.
I then applied the driver upgrade to drives #1 and #2 (10.4.11) while running off #4. I did not apply the driver update to #3 (10.5.1) and restarted, using Option key.
All 4 drives appeared successfully on screen as expected with their names!
Then I selected each drive one by one:
#1 = kernal panic. Hard shut down, used Option key again
#2 = kernal panic, same as #1
#3 = froze at gray Apple screen - no spinning gear. Hard shut down.
Tthankfully, left Start Up disk pref to be #4 external and on restart, let the system boot off without going to the Option screen. #4 booted OK. Whew...
So all 3 drives on the Acard, won't boot. I was concerned it was the 2.06 driver, but since it wasn't applied to #3 Leopard drive, I'm assuming the firmware is the issue and perhaps not compatible with 10.4.11 or 10.5.1?
Two things I've not tried:
1) With #4 selected in Sys Prefs, then using Option key and selecting #4 there too to see if using the Option key selector is a problem too.
2) Selecting any of #1, #2, or #3 drives in Sys Prefs and restarting without Option key selector.
My fear is that if my last working drive #4 isn't the default drive set in Sys Prefs, if Acard isn't the problem alone and there is also a problem selecting any drive using the Option key - even #4, then if #4 isn't the default and all 3 Acard drives panic on regular boot (non-Option key) and I have to hard restart, will keep defaulting to whatever drive I set in the Sys Prefs and not be able to get back to #4.
Should I just go to my local computer store and see if they have a newer model PCI card and trash my existing one as I may have ruined it with the firmware updater?
Thoughts? -
Problem when use clientListener on inputText in table with arrowUp key
Hello all,
My problem is related to the thread {thread:id=2305768}
On a af:table I have one af:inputText with af:clientListener, the type of the clientListener is keyDown.
I already use it to get the tab key in order to change the focus on the next line and inputText in my table. It's working.
Code of the af:table (contentDelivery is set to immediate):
<af:table value="#{bindings.NeedLineView.collectionModel}"
var="row" rows="#{bindings.NeedLineView.rangeSize}"
emptyText="#{bindings.NeedLineView.viewable ? procurementproposalvcBundle.noData : procurementproposalvcBundle.noAccess }"
fetchSize="#{bindings.NeedLineView.rangeSize}"
rowBandingInterval="0" id="t1"
binding="#{viewScope.procurementProposalDetail.needLinesTable}"
rowSelection="single"
selectionListener="#{viewScope.procurementProposalDetail.tableSelectionListener}"
contentDelivery="immediate">Code of the af:inputText :
<af:inputText value="#{row.bindings.AmendedNeedTransient.inputValue}"
label="#{bindings.NeedLineView.hints.AmendedNeedTransient.label}"
required="#{bindings.NeedLineView.hints.AmendedNeedTransient.mandatory}"
columns="#{bindings.NeedLineView.hints.AmendedNeedTransient.displayWidth}"
maximumLength="#{bindings.NeedLineView.hints.AmendedNeedTransient.precision}"
shortDesc="#{bindings.NeedLineView.hints.AmendedNeedTransient.tooltip}"
rendered="#{securityContext.userInRole['modifyProcurementProposal']}"
id="it1"
valueChangeListener="#{viewScope.procurementProposalDetail.changeAmendedNeed}"
contentStyle="background-color:#{viewScope.procurementProposalDetail.calculateNeedHaveToBeLaunched ? 'transparent' : 'yellow'}"
autoSubmit="true"
binding="#{viewScope.procurementProposalDetail.amendedNeedInputText}"
disabled="#{viewScope.procurementProposalDetail.calculateNeedHaveToBeLaunched}"
clientComponent="true">
<f:validator binding="#{row.bindings.AmendedNeedTransient.validator}"/>
<af:convertNumber groupingUsed="false"
pattern="#{bindings.NeedLineView.hints.AmendedNeedTransient.format}"/>
<af:serverListener type="onTabPressed"
method="#{viewScope.procurementProposalDetail.onTabPressed}"/>
<af:serverListener type="onUpArrowPressed"
method="#{viewScope.procurementProposalDetail.onUpArrowPressed}"/>
<af:clientListener type="keyDown" method="handleKeys"/>
</af:inputText>Java script Code in the same jsff page :
<trh:script>
function handleKeys(event) {
var TABKEY = 9; // tabulation
var UPARROWKEY = 38;
if (event.getKeyCode() == TABKEY) {
AdfCustomEvent.queue(event.getSource(), "onTabPressed",
},true);
} else if (event.getKeyCode() == UPARROWKEY) {
AdfCustomEvent.queue(event.getSource(), "onUpArrowPressed",
},true);
function setFocusId(id) {
var inputText = AdfPage.PAGE.findComponent(id);
inputText.focus();
</trh:script>As you can see in the code above, I want to do the same thing with the arrow up key, because when user use this key to validate the change on the inputText value, I need to set the focus on the previous line.
The problem is the following : when I use the arrow up key when the focus was set to the inputText (by the java script function setFocusId), the client listener is not called (I put some traces in the server method), If I just click on the inputText and after use the arrow up key then client listener is called correctly.
If someone have an idea, because I'm lost
Best Regards
BenjaminFranck,
Thanks for your answer, perhaps I don't understand but you tell me.
My problem is located on the handelKeys function, I've no problem to set the focus correctly.
The focus is set with the java code below (where setFocusId is a javaScript function)
FacesContext facesContext = FacesContext.getCurrentInstance();
ExtendedRenderKitService service = Service.getRenderKitService(facesContext, ExtendedRenderKitService.class);
StringBuilder script = new StringBuilder();
script.append("setFocusId('").append(getInputTextId()).append("')");
service.addScript(facesContext, script.toString());or same result (both are working)
FacesContext facesContext = FacesContext.getCurrentInstance();
ExtendedRenderKitService service = Service.getRenderKitService(facesContext, ExtendedRenderKitService.class);
StringBuilder script = new StringBuilder();
script.append("var inputText = AdfPage.PAGE.findComponent(\"").append(getInputTextId()).append("\");");
script.append("inputText.focus();");
service.addScript(facesContext, script.toString()); What I don't understand in my case is why my handleKeys function is not called when I use the arrow up key after the focus was set by the method above. I have to click on the inputText and then use the arrow up key in order to see that the handleKeys function was called. I don't have this problem with the tab key.
is it more clear ? sorry for that
Benjamin
ps : I will try to use af:resource and get information on this point. -
hi,
i have problem when installing itune. it said:
Could not open key HKEY_LOCAL_MACHINE32\SOFTWARE|Microsoft\Windows\CurrentVersion\Run. Verify that you have sufficient access to that key, or contact your support personnel.
Please help me i can't do anything without ituneFor "Could not open key/write value" errors when reinstalling try b noir's user tip:
"Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\
[LongStringOfLettersAndNumbers]" error messages when installing iTunes for Windows.
The technique can be applied to the branch of the registry mentioned in the error message.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
Problem with my 7911 phone when i press Keys 1,2 or 3 it leads me to settings menu.
I have a problem with my 7911 phone when i press Keys 1,2 or 3 it leads me to settings menu. I cannot factory reset phone because when i press 1 after holding # it starts booting.
I have never heard of bug causing this type of an issue. Do you have other phones of the same models and if so do they behave the same way? Sounds to be like faulty phone.
Chris -
Have problem when generate Web Service from bapi function
Dear all,
Please kindly help me about generating Web Service from BAPI function, It does not success only this attached function.
I have done so many function without any problems.
I found 1 case that I use specific variable to be an import/ export then, it can't create as well.
As for this one, I try so many changes but I can't success it as well.
This is my function on R/3 4.6C, Dot net connector 2.0, Dot net Frame Work 1.1.
FUNCTION Z_BAPI_ATTACHMENT_CREATE.
""Local interface: Type: Remote-enabled module
*" IMPORTING
*" VALUE(P_BOTYPE) LIKE BORIDENT-OBJTYPE
*" VALUE(P_BO_ID) LIKE BORIDENT-OBJKEY
*" VALUE(P_MSGTYP) LIKE SOFM-DOCTP
*" VALUE(P_DOCTY) LIKE BORIDENT-OBJTYPE
*" VALUE(P_RELTYP) LIKE BRELTYP-RELTYPE
*" VALUE(P_FNAME) LIKE RLGRAP-FILENAME
*" VALUE(P_OBJDES) TYPE SO_OBJ_DES
*" EXPORTING
*" VALUE(RETURNMESSAGE) TYPE CHAR50
INCLUDE : <cntn01>.
P_BOTYPE TYPE BORIDENT-OBJTYPE DEFAULT 'BUS2105'
P_BO_ID TYPE BORIDENT-OBJKEY
P_MSGTYPE TYPE SOFM-DOCTP DEFAULT 'URL'
P_DOCTY TYPE BORIDENT-OBJTYPE DEFAULT 'MESSAGE'
P_RELTYP TYPE BRELTYP-RELTYPE DEFAULT 'ATTA'
P_FNAME TYPE RLGRAP-FILENAME
P_OBJDES TYPE SO_OBJ_DES
TYPES: BEGIN OF ty_message_key,
foltp TYPE so_fol_tp,
folyr TYPE so_fol_yr,
folno TYPE so_fol_no,
doctp TYPE so_doc_tp,
docyr TYPE so_doc_yr,
docno TYPE so_doc_no,
fortp TYPE so_for_tp,
foryr TYPE so_for_yr,
forno TYPE so_for_no,
END OF ty_message_key.
DATA : lv_message_key TYPE ty_message_key.
DATA : lo_message TYPE swc_object.
DATA : lt_doc_content TYPE STANDARD TABLE OF soli-line
WITH HEADER LINE.
First derive the Attachment's ( MESSAGE )document type.
p_docty = 'MESSAGE'.
CASE p_reltyp.
In case of URls
WHEN 'URL'.
p_msgtyp = 'URL'.
In case of Notes / Private Notes
WHEN 'NOTE' OR 'PNOT'.
p_msgtyp = 'RAW'.
WHEN 'ATTA'.
Take given parameter e.g. 'DOC', 'PDF' etc.
P_MSGTYP = 'EXT'.
WHEN OTHERS.
....exit
EXIT.
ENDCASE.
Create an initial instance of BO 'MESSAGE' - to call the
instance-independent method 'Create'.
swc_create_object lo_message 'MESSAGE' lv_message_key.
define container to pass the parameter values to the method call
in next step.
swc_container lt_message_container.
Populate container with parameters for method
swc_set_element lt_message_container 'DOCUMENTTITLE' p_objdes.
swc_set_element lt_message_container 'DOCUMENTLANGU' 'E'.
swc_set_element lt_message_container 'NO_DIALOG' 'X'.
swc_set_element lt_message_container 'DOCUMENTNAME' p_docty.
swc_set_element lt_message_container 'DOCUMENTTYPE' p_msgtyp.
In case of URLs..it should be concatenated with &KEY& in the begining.
CASE p_msgtyp.
WHEN 'URL'.
lt_doc_content = '&KEY&http://www.rmtiwari.com' .
CONCATENATE '&KEY&' p_fname INTO lt_doc_content.
APPEND lt_doc_content.
In case of Notes or Private Notes, get the data from files on appl
server or from wherever(? - remember background).
WHEN 'RAW'.
lt_doc_content = p_fname.
APPEND lt_doc_content.
In case of PC File attachments
WHEN OTHERS.
OPEN DATASET p_fname FOR INPUT IN BINARY MODE.
IF sy-subrc EQ 0.
DO.
READ DATASET p_fname INTO lt_doc_content. "2 of 27
IF sy-subrc EQ 0.
APPEND lt_doc_content.
ELSE.
EXIT.
ENDIF.
ENDDO.
CLOSE DATASET p_fname.
ENDIF.
ENDCASE.
'DocumentContent' is a multi-line element ( itab ).
swc_set_table lt_message_container 'DocumentContent' lt_doc_content.
Size is required in case of File attachments
DATA : lv_doc_size TYPE i.
DATA : l_file_lines TYPE i.
DESCRIBE TABLE lt_doc_content LINES l_file_lines.
READ TABLE lt_doc_content INDEX l_file_lines.
lv_doc_size = ( 255 * ( l_file_lines - 1 ) ) +
STRLEN( lt_doc_content ).
swc_set_element lt_message_container 'DOCUMENTSIZE' lv_doc_size .
Refresh to get the reference of create 'MESSAGE' object for attachment
swc_refresh_object lo_message.
swc_call_method lo_message 'CREATE' lt_message_container.
Get Key of new object
swc_get_object_key lo_message lv_message_key.
Now we have attachment as a business object instance. We can now
attach it to our main business object instance.
Create main BO object_a
data: LO_IS_OBJECT_A type SIBFLPORB. "type SIBFLPORB is unknown, so I
DATA: lo_is_object_a TYPE borident.
lo_is_object_a-objkey = p_bo_id.
lo_is_object_a-objtype = p_botype.
LO_IS_OBJECT_A-CATID = 'BO'.
Create attachment BO object_b
data: LO_IS_OBJECT_B type SIBFLPORB. "type SIBFLPORB is unknown
DATA: lo_is_object_b TYPE borident.
lo_is_object_b-objkey = lv_message_key.
lo_is_object_b-objtype = p_docty.
LO_IS_OBJECT_B-CATID = 'BO'.
*TRY.
*CALL METHOD CL_BINARY_RELATION=>CREATE_LINK
EXPORTING
IS_OBJECT_A = LO_IS_OBJECT_A
IS_OBJECT_B = LO_IS_OBJECT_B
IP_RELTYPE = P_RELTYP.
CALL FUNCTION 'BINARY_RELATION_CREATE'
EXPORTING
obj_rolea = lo_is_object_a
obj_roleb = lo_is_object_b
relationtype = p_reltyp
EXCEPTIONS
OTHERS = 1.
Check if everything OK...who cares!!
COMMIT WORK.
if sy-subrc = 0.
RETURNMESSAGE = 'S-Success'.
else.
RETURNMESSAGE = 'E-Error'.
endif.
ENDFUNCTION.
Thanks in advance,
Benjawan
Edited by: Nitipat Chadchavalpanichaya on Oct 20, 2008 9:02 AMThere is no any error message show up. It just the class
Z_BAPI_ATTACHMENT_CREATE doesn't create autometically as normal. I showed you as below.
That means I can't call class z_bapi_attachment_create.
' <autogenerated>
' This code was generated by a SAP. NET Connector Proxy Generator Version 2.0
' Created at 21/10/2551
' Created from Windows
' Changes to this file may cause incorrect behavior and will be lost if
' the code is regenerated.
' </autogenerated>
Imports System
Imports System.Text
Imports System.Collections
Imports System.ComponentModel
Imports System.Runtime.InteropServices
Imports System.Xml.Serialization
Imports System.Web.Services
Imports System.Web.Services.Description
Imports System.Web.Services.Protocols
Imports SAP.Connector
'@ <summary>
'@ Client SAP proxy class
'@ </summary>
<WebServiceBinding(Name:="dummy.Binding", Namespace:="urn:sap-com:document:sap:rfc:functions")> _
Public Class PRAttachment
Inherits SAPClient
'@ <summary>
'@ Initializes a new PRAttachment.
'@ </summary>
Public Sub New()
End Sub
'@ <summary>
'@ Initializes a new PRAttachment with a new connection based on the specified connection string.
'@ </summary>
'@ <param name="connectionString">A connection string (e.g. RFC or URL) specifying the system where the proxy should connect to.</param>
Public Sub New(ByVal ConnectionString As String)
MyBase.New(ConnectionString)
End Sub
'@ <summary>
'@ Initializes a new PRAttachment and adds it to the given container.
'@ This allows automated connection mananged by VS component designer:
'@ If container is disposed, it will also dispose this SAPClient instance,
'@ which will dispose a contained connection if needed.
'@ </summary>
'@ <param name="Cont">The container where the new SAPClient instance is to be added.</param>
Public Sub New(ByVal Cont As Container)
MyBase.New(Cont)
End Sub
End Class -
Problem when I execute program SCM in background
Hi experts,
I am with problem when I execute a program (SCM) in background. I inserted a new field (estoque_seg(10)) and the process stopped at execute in background.When I call transaction and press F8, works but for this, I need jump the consistence IF sy-batch IS INITIAL....Dont has any bath imput, only functions. Any idea?
Follow below the code:
Estrutura para tabela ENTRADA
DATA: BEGIN OF st_entrada,
matnr(40) TYPE c,
werks(20) TYPE c,
ponto_abas(10) TYPE c,
estoque_max(10) TYPE c,
cobertura(10) TYPE c,
estoque_seg(10) TYPE c, " Erlon Lourenço 20/01/2011
END OF st_entrada.
Estrutura para tabela de LOG
*TYPES: BEGIN OF st_saida,
pernr(8) TYPE c ,
date(10) TYPE c,
er_contribuition(15) TYPE c,
tax(15) TYPE c,
msg_erro(80) TYPE c,
END OF st_saida.
Tabela para obter descricao da mensagem
*DATA: ti_saida TYPE STANDARD TABLE OF st_saida WITH HEADER LINE
INITIAL SIZE 0.
Tabela que recebera o arquivo texto
DATA: BEGIN OF ti_entrada OCCURS 0.
INCLUDE STRUCTURE st_entrada.
DATA: END OF ti_entrada.
DATA: BEGIN OF it_matid OCCURS 0,
matnr TYPE /sapapo/matkey-matnr,
matid TYPE /sapapo/matkey-matid,
END OF it_matid.
DATA: BEGIN OF it_locid OCCURS 0,
locno TYPE /sapapo/loc-locno,
locid TYPE /sapapo/loc-locid,
END OF it_locid.
DATA: BEGIN OF it_matlotsz OCCURS 0,
target_dur TYPE /sapapo/matlotsz-target_dur,
END OF it_matlotsz.
DATA: wa_matloc LIKE /sapapo/matloc OCCURS 0 WITH HEADER LINE,
wa_matlsim LIKE /sapapo/matlsim OCCURS 0 WITH HEADER LINE,
wa_matlotsz LIKE /sapapo/matlotsz OCCURS 0 WITH HEADER LINE.
Variáveis Globais
DATA: v_tabix TYPE sy-tabix,
v_vrsioid TYPE /sapapo/apo01-vrsioid,
v_tam TYPE i.
Select-Options & Parameters
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_versao TYPE /sapapo/apo01-vrsioex OBLIGATORY DEFAULT '000',
p_abas AS CHECKBOX ,
p_est AS CHECKBOX ,
p_cober AS CHECKBOX ,
p_estsg AS CHECKBOX. " ERLON LOURENCO - 20/01/2012 - Estoque Segurança
SELECTION-SCREEN END OF BLOCK b1.
Start-of-Selection
START-OF-SELECTION.
PERFORM consiste.
PERFORM f_upload.
PERFORM f_processa_batch.
PERFORM f_saida_dados.
MESSAGE i000 WITH 'Processo encerrado com Sucesso'.
END-OF-SELECTION.
*& Form F_UPLOAD
text
--> p1 text
<-- p2 text
FORM f_upload .
DATA: lc_file TYPE string.
TYPES: BEGIN OF st_ent,
cam(80),
END OF st_ent.
DATA: ti_ent TYPE STANDARD TABLE OF st_ent WITH HEADER LINE
INITIAL SIZE 0.
RANGES: r_file FOR zget0001-field_content.
r_file[] = zbs_constantes=>obter( i_bukrs = space i_field = 'FILE' i_process = 'PONTO-REAB' ).
READ TABLE r_file INDEX 1.
lc_file = r_file-low.
CLEAR: ti_entrada,
ti_entrada[],
ti_ent,
ti_ent[].
abrir arquivo para leitura
OPEN DATASET lc_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
MESSAGE i000 WITH text-e01.
STOP.
ENDIF.
Leitura de arquivos
DO.
READ DATASET lc_file INTO ti_ent.
IF sy-subrc <> 0.
EXIT.
ENDIF.
APPEND ti_ent.
ENDDO.
Fechamento do arquivo
CLOSE DATASET lc_file.
LOOP AT ti_ent.
SPLIT ti_ent AT ';' INTO ti_entrada-matnr ti_entrada-werks ti_entrada-ponto_abas ti_entrada-estoque_max ti_entrada-cobertura ti_entrada-estoque_seg.
APPEND ti_entrada.
ENDLOOP.
ENDFORM. " F_UPLOAD
*& Form F_PROCESSA_BATCH
text
--> p1 text
<-- p2 text
FORM f_processa_batch .
LOOP AT ti_entrada.
v_tabix = sy-tabix.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = ti_entrada-matnr
IMPORTING
output = ti_entrada-matnr.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = ti_entrada-ponto_abas
IMPORTING
output = ti_entrada-ponto_abas.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = ti_entrada-estoque_max
IMPORTING
output = ti_entrada-estoque_max.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = ti_entrada-cobertura
IMPORTING
output = ti_entrada-cobertura.
IA - ERLON LOURENCO - 20/01/2012
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = ti_entrada-estoque_seg
IMPORTING
output = ti_entrada-estoque_seg.
FA - ERLON LOURENCO - 20/01/2012
MODIFY ti_entrada INDEX v_tabix.
ENDLOOP.
CLEAR: it_matid,
it_matid[],
it_locid,
it_locid[],
wa_matlsim,
wa_matlsim[],
wa_matloc,
wa_matloc[].
SELECT matnr matid INTO TABLE it_matid FROM /sapapo/matkey
FOR ALL ENTRIES IN ti_entrada WHERE matnr = ti_entrada-matnr.
SELECT locno locid INTO TABLE it_locid FROM /sapapo/loc
FOR ALL ENTRIES IN ti_entrada WHERE locno = ti_entrada-werks.
IF p_versao = '000'.
LOOP AT ti_entrada.
READ TABLE it_matid WITH KEY matnr = ti_entrada-matnr.
IF sy-subrc = 0 .
READ TABLE it_locid WITH KEY locno = ti_entrada-werks.
IF sy-subrc = 0.
SELECT SINGLE * INTO wa_matloc FROM /sapapo/matloc WHERE matid = it_matid-matid AND
locid = it_locid-locid.
IF sy-subrc = 0.
IF p_abas = 'X'.
wa_matloc-reord = ti_entrada-ponto_abas.
ENDIF.
IF p_est = 'X'.
wa_matloc-maxstock = ti_entrada-estoque_max.
ENDIF.
" IA - Erlon Lourenço - 23/01/2012
if p_estsg = 'X'.
wa_matloc-safty = ti_entrada-estoque_seg. " Erlon Lourenço - 23/01/2012
endif.
"FA - Erlon Lourenço - 23/01/2012
IF p_abas = 'X' OR
p_est = 'X' OR
p_estsg = 'X'. " Erlon Lourenço - 23/01/2012
APPEND wa_matloc TO wa_matloc.
ENDIF.
SELECT SINGLE * INTO wa_matlotsz FROM /sapapo/matlotsz WHERE lszid = wa_matloc-lszid.
IF sy-subrc = 0.
IF p_cober = 'X'.
wa_matlotsz-target_dur = ti_entrada-cobertura.
APPEND wa_matlotsz TO wa_matlotsz.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP. " LOOP AT ti_entrada.
ELSE.
Verifica versáo para saber se preenche a tabela wa_matlsim
SELECT SINGLE vrsioid INTO v_vrsioid FROM /sapapo/apo01 WHERE vrsioex = p_versao.
IF sy-subrc = 0.
SELECT * INTO TABLE wa_matlsim FROM /sapapo/matlsim WHERE simid = v_vrsioid.
IF wa_matlsim[] IS NOT INITIAL.
LOOP AT ti_entrada.
READ TABLE it_matid WITH KEY matnr = ti_entrada-matnr.
IF sy-subrc = 0 .
READ TABLE it_locid WITH KEY locno = ti_entrada-werks.
IF sy-subrc = 0.
READ TABLE wa_matlsim WITH KEY matid = wa_matloc-matid
locid = wa_matloc-locid.
IF sy-subrc = 0.
wa_matlsim-reord = ti_entrada-ponto_abas.
wa_matlsim-maxstock = ti_entrada-estoque_max.
wa_matlsim-safty = ti_entrada-estoque_seg. " Erlon Lourenço - 23/01/2012
MODIFY wa_matlsim INDEX v_tabix.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP. " LOOP AT ti_entrada.
ENDIF. " IF wa_matlsim[] IS NOT INITIAL.
ENDIF. " IF sy-subrc = 0. 1º
ENDIF. "IF p_versao = '000'
Funcáo que atualiza campos nas bases de dados.
CALL FUNCTION '/SAPAPO/DM_PRODUCTS_POST'
EXPORTING
iv_vb = 'U'
TABLES
it_matloc = wa_matloc
it_matlsim = wa_matlsim
it_matlotsz = wa_matlotsz
EXCEPTIONS
not_qualified = 1
insert_failed = 2
update_failed = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " F_PROCESSA_BATCH
FORM BDC_DYNPRO
*& Form F_SAIDA_DADOS
text
--> p1 text
<-- p2 text
FORM f_saida_dados .
IF ti_saida[] IS NOT INITIAL.
DATA: lc_file TYPE string.
lc_file = p_erros.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = lc_file
FILETYPE = 'ASC'
TABLES
data_tab = ti_saida
FIELDNAMES =
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22
IF sy-subrc <> 0.
MESSAGE i005 WITH 'Error to unload file !'.
STOP.
ENDIF.
ENDIF.
ENDFORM. " F_SAIDA_DADOS
*& Form CONSISTE
text
--> p1 text
<-- p2 text
FORM consiste .
IF p_abas IS INITIAL AND
p_est IS INITIAL AND
p_cober IS INITIAL AND
p_estsg IS INITIAL. " ERLON LOURENCO - 20/01/2012 - Estoque Segurança
MESSAGE i000 WITH text-e03.
STOP.
ENDIF.
IF sy-batch IS INITIAL.
MESSAGE i000 WITH text-e02.
STOP.
ENDIF.
Best regards,
Erlon Lourenço
Edited by: Erlon Louren on Jan 27, 2012 11:09 AMHi Raja,
Check weather there are any enhancements to the datasource.If yes once check the code in CMOD.Seems there is some discrepency in that.
Regards
Karthik -
Problem with the volume keys on my keyboard.
Hey everybody,
I have a problem with the volume keys on my keyboard. This started a couple days ago and I can't seem to figure out how to fix it. When I press the volume up or down buttons, the graphic appears on the screen as it normally would, but has no effect on the volume of the sound coming out of my speakers. Therefore, the only way to change the volume of music or whatever I am listening to is to use the volume control within the program/website itself (itunes, youtube, etc.) Even changing the volume on the volume icon at the menu bar on top of the screen does nothing. If anyone has an idea of how to go about solving this issue, I would greatly appreciate it. Thanks!First look into the Preference > Sound > Outpur whether internal Speakers are choosen.
The only Preference to delete I can discover is com.apple.systempreferences.plist in your home Library folder. You can try to move it out to the desktop for example, not to loose all your settings. Restart and see whether the problem still persists. If you don't know how to do this here some Terminal (Applications > Utilities) commands. Enter them by copy and paste followed by <enter>
mv ~/Library/Preferences/com.apple.systempreferences.plist ~/Desktop/
restart
to get it back:
mv ~/Desktop/com.apple.systempreferences.plist ~/Library/Preferences/
confirm with "y" if you are asked to replace this file.
marek -
Problem when editting a row in report
Hello,
I have a problem when I want to edit a row in a report.
I have created a form with report, and now whe I click on the edit icon on the report page, it navigates me to the form page but wothout the row data, so it let me create a new row..
What should I do??Hi,
After editing the row go to session vales in the form page and see if the hidden primary key column has a value set ?
Did you do any changes to the form or report after creating "From on a table with report" ?
If you can recreate the issue in http://apex.oracle.com i can look into it.
Edited by: Apex-Ape on Jun 17, 2012 7:10 AM -
Please read my problem when I configure Weblogic https
I want to use https protocol and SSL for my web application in Weblogic
I have a problem but I am not sure it's related to configuring Weblogic or not please if you can advice me
I use "openssl" to be my own Certificate Authority (CA)
I used this instructions for using openssl [http://www.g-loaded.eu/2005/11/10/be-your-own-ca/]
after configuring openssl I used these steps for creating my keystore
1. First I use this keytool for creating my private key and public key
keytool -genkeypair -keyalg rsa -keystore ali_keytool.jks -storepass ali120 -alias ali_alias
What is your first and last name?
[Unknown]: AliKhosravi
What is the name of your organizational unit?
[Unknown]: Boors
What is the name of your organization?
[Unknown]: software
What is the name of your City or Locality?
[Unknown]: Tehranali_keytool.jks
What is the name of your State or Province?
[Unknown]: Tehran_Province
What is the two-letter country code for this unit?
[Unknown]: IR
Is CN=AliKhosravi, OU=Boors, O=software, L=Tehran, ST=Tehran_Province, C=IR correct?
[no]: y
2. I create my CSR by this command
keytool -certreq -alias ali_alias -keystore ali_keytool.jks -storepass ali120 -file ali_keytool.csr
3. I sign the ali_keytool.csr by openssl . I do it like this :
openssl x509 -req -in ali_keytool.csr -CA certs/myca.crt -CAkey private/myca.key -out ali_keytool.crt -days 365 -CAcreateserial -CAserial my_ca.seq
4.Now my I have a signed certificate (ali_keytool.crt) and my CA certificate (myca.crt)
and I import CA certificate to my keystore
keytool -import -alias Openssl_ca -file myca.crt -keystore ali_keytool.jks -storepass ali120
5. I import the signed certificate into my keystore by alias of private key
keytool -import -alias ali_alias -file ali_keytool.crt -keystore ali_keytool.jks -storepass ali120
6. I import the CA certificate again into a new keystore for creating Trust
keytool -import -alias my_ca -file myca.crt -keystore ali_keytool_trust.jks -storepass ali120
All steps done without any errors
I used this address for help [http://www.startux.de/java/44-dealing-with-java-keystores]
Now I want to configure kestores ans ssl in Weblogic
7. I go to the Environment-->Servers-->AdminServer-->Keystore tab in wblogic
8. I set "Keystores=Custom Identity and Custom Trust", "Custom Identity Keystore = H:\trust\ali_keytool.jks" , "Custom Identity Keystore Type=jks" ,
"Custom Identity Keystore Passphrase:ali120"
"Confirm Custom Identity Keystore Passphrase=ali120"
"Custom Trust Keystore=H:\trust\ali_keytool_trust.jks" , "Custom Trust Keystore Type=jks" ,
"Custom Trust Keystore Passphrase=ali120" , "Confirm Custom Trust Keystore Passphrase=ali120"
9. Then I go to SSL tab and I set "Identity and Trust Locations=Keystores" , "Private Key Alias=ali_alias" ,"Private Key Passphrase=ali120",
"Confirm Private Key Passphrase=ali120"
10. I go to the General tab and select "SSL Listen Port Enabled"
11. I user Firefox as WebBrowser so I configure my Browser I select Tools-->Options-->ViewCertificates --> Authorities tab
and I import the server certificate here is "myca.crt the openssl certificate"
in Downloading Certificate window I select
"Trust this CA to identify web sites"
"Trust this CA to identify email users"
"Trust this CA to identify software developers"
12. I restart Weblogic
13. I try to loging in weblogic like this "https://127.0.0.1:7002/console"
The webBroser show me this warning:
This Connection is Untrusted
You have asked Firefox to connect
securely to 127.0.0.1:7002, but we can't confirm that your connection is secure.
Normally, when you try to connect securely,
sites will present trusted identification to prove that you are
going to the right place. However, this site's identity can't be verified.
What Should I Do?
If you usually connect to
this site without problems, this error could mean that someone is
trying to impersonate the site, and you shouldn't continue.
Technical Details
I Understand the Risks
I don't know why the WebBrowser show me this warning while I imported the Server Certificate
I don't know that my problem is in configuring WebLogic or FireFox WebBrowser or Keystore
If you know please advice me
ThanksModerator Action:
You already aked this question a couple of weeks earlier:
My problem when I enable SSL in Weblogic and I don't have a trusted CA cert
This is a user-to-user forum.
There is no obligation that anyone respond. They will answer if they choose to.
If there is a business need for a resolution, use your service contract privileges and open a support ticket with Oracle Support.
http://www.oracle.com/us/support/contact-068555.html
This duplicate forum post is locked. -
ORA-00600 problem when create XMLType table with registerd schema
Hi,
I am using Oracle9i Enterprise Edition Release 9.2.0.4.0 on RedHat Linux 7.2
I found a problem when I create table with registered schema with follow content:
<xs:element name="body">
<xs:complexType>
<xs:sequence>
</xs:sequence>
<xs:attribute name="id" type="xs:ID"/>
<xs:attribute name="class" type="xs:NMTOKENS"/>
<xs:attribute name="style" type="xs:string"/>
</xs:complexType>
</xs:element>
<xs:element name="body.content">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="unbounded">
<xs:element ref="p"/>
<xs:element ref="hl2"/>
<xs:element ref="nitf-table"/>
<xs:element ref="ol"/>
</xs:choice>
<xs:attribute name="id" type="xs:ID"/>
</xs:complexType>
</xs:element>
Does Oracle not support element reference to other element with dot?
For instance, body -> body.content
Thanks for your attention.Sorry, amendment on the schema
<xs:element name="body">
<xs:complexType>
<xs:sequence>
<xs:element ref="body.head" minOccurs="0"/>
<xs:element ref="body.content" minOccurs="0" maxOccurs="unbounded"/>
<xs:element ref="body.end" minOccurs="0"/>
</xs:sequence>
<xs:attribute name="id" type="xs:ID"/>
<xs:attribute name="class" type="xs:NMTOKENS"/>
<xs:attribute name="style" type="xs:string"/>
</xs:complexType>
</xs:element> -
When I first tried itunes with my new hard drive there was the problem with the registry keys but something also flagged up about needing a signed driver. Is this anything to do with why Itunes and my computer no longer recognises when my ipod is linked up? Whatever i try under 'devices' my ipod is never available to sync up. If anyone can help I would be most grateful.
Thanks for your reply. Unfortunately this has not worked. I didn't have quicktime to begin with so I don't know if that makes a difference? After following the instructions, I get the "registry keys missing" problem appear again (which I've subsequently fixed again) and then when I connected the ipod I got the following message - 'Device driver software was not successfully installed'.
I've tried windows update but this doesn't do anything as '...the service is not running'.
Any suggestions? -
ORA-01403: no data found Problem when using AUTOMATIC ROW FETCH to populate
ORA-01403: no data found Problem when using AUTOMATIC ROW FETCH to populate a form.
1) Created a FORM on EMP using the wizards. This creates an AUTOMATIC ROW FETCH
TABLE NAME - EMP
Item Containing PRIMARY KEY - P2099_EMPNO
Primary key column - EMPNO
By default the automatic fetch has a ‘Process Error Message’ of ‘Unable to fetch row.’
2) Created a HTML region. Within this region add
text item P2099_FIND_EMPNO
Button GET_EMP to submit
Branch Modified the conditional branch created during button creation to set P2099_EMPNO with &P2099_FIND_EMPNO.
If I then run the page, enter an existing employee number into P2099_EMPNO and press the GET_EMP button the form is populated correctly. But if I enter an employee that does not exist then I get the oracle error ORA-01403: no data found and no form displayed but a message at the top of the page ‘Action Processed’.I was expecting a blank form to be displayed with the message ‘Unable to fetch row.’
I can work around this by making the automated fetch conditional so that it checks the row exists first. Modify the Fetch row from EMP automated fetch so that it is conditional
EXIST (SQL query returns at least one row)
select 'x'
from EMP
where EMPNO = :P2099_EMPNO
But this means that when the employee exists I must be fetching from the DB twice, once for the condition and then again for the actual row fetch.
Rather than the above work around is there something I can change so I don’t get the Oracle error? I’m now wondering if the automatic row fetch is only supposed to be used when linking a report to a form and that I should be writing the fetch process manually. The reason I haven’t at the moment is I’m trying to stick with the automatic wizard generation as much as I can.
Any ideas?
Thanks PeteHi Mike,
I've tried doing that but it doesn't seem to make any difference. If I turn debug on it shows below.
0.05: Computation point: AFTER_HEADER
0.05: Processing point: AFTER_HEADER
0.05: ...Process "Fetch Row from EMP": DML_FETCH_ROW (AFTER_HEADER) F|#OWNER#:EMP:P2099_EMPNO:EMPNO
0.05: Show ERROR page...
0.05: Performing rollback...
0.05: Processing point: AFTER_ERROR_HEADER
I don't really wan't the error page, either nothing with the form not being populated or a message at the top of the page.
Thanks Pete -
Problem when creating Database (Database, OS and hardware Configuraiton included)
Problem when creating Database:
Below are the problems, which I faced during creation of database. I have mentioned both the problem separately. Plus the log file maintained by Oracle during installation. It might help in diagnosing the error. Plus a little conclusion with I turned up to.
There are two problems, when creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
Problem # 1:
When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
I searched following oracle help for this problem.
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Problem # 2:
When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
I searched following oracle help for this problem.
ORA-12571: TNS:packet writer failure
Cause: An error occurred during a data send.
Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Log File Showing Error :
Result code for launching of configuration tool is 0
Launched configuration tool Oracle Database Configuration Assistant
Command which is being spawned is C:\Program Files\Oracle\jre\1.1.7\bin/jrew.exe -Duser.dir=d:\oracle\ora81\assistants\dbca\jlib -classpath ";C:\Program Files\Oracle\jre\1.1.7\lib\rt.jar;C:\Program Files\Oracle\jre\1.1.7\lib\i18n.jar;d:\oracle\ora81\jlib\ewt-3_3_6.jar;d:\oracle\ora81\jlib\share-1_0_8.jar;d:\oracle\ora81\jlib\swingall-1_1_1.jar;d:\oracle\ora81\assistants\dbca\jlib\dbassist.jar;d:\oracle\ora81\assistants\jlib\jnls.jar;d:\oracle\ora81\assistants\jlib\acc.jar;d:\oracle\ora81\jlib\help-3_1_8.jar;d:\oracle\ora81\jlib\ice-4_06_6.jar;d:\oracle\ora81\jlib\netcfg.jar;" DBCreateWizard -progress_only -responseFile NO_VALUE -createtype seed -numusers NO_VALUE -apptype NO_VALUE -cartridges NO_VALUE -options NO_VALUE -demos NO_VALUE -seedloc d:\oracle\ora81\starterdb -sid ora8i -orabase d:\oracle -clususer NO_VALUE -cluspswd Protected value, not to be logged -nodeinfo NO_VALUE -gdbName ora8i
Invalid Exit Code. The following result code will be used for configuration tool: 1
Configuration tool Oracle Database Configuration Assistant failed
The datafiles will be copied from the CD to d:\oracle\oradata\ora8i. The Oracle Database Configuration Assistant will begin creating the database.
An Oracle database will be created for you. The database name will be ora8i. The system identifier for the database will be ora8i. The password for the INTERNAL account will be ******, the SYS account will be change_on_install and the SYSTEM account will be manager.
Log File of Installation:
The above code is a part of the log file, which is generated by Oracle installer at C:\Program Files\Oracle\Inventory\Log\..
I just pasted the part of code, highlighted is the code showing error with Oracle Database Configuration Assistant.
Software & Hardware Configuration are as follow:
Software:
Database
Oracle 8.1.7.0.0 (Oracle8i)
Operating System
Microsoft Windows 2000
5.00.2195
Service Pack 2
Hardware:
x86 Family 6 Model 8 stepping
10
AT/AT COMPITABLE
260,400 KB RAMDont't worry about that. Before you
create a table(or view), it is wise to
drop the table(or view) with the same name.
If the name doesn't exist, of course there
is an error message. See the following script:
-------------------begin-----------
drop table students cascade constraints;
create table students (
sid varchar2(5),
fname varchar2(20),
lname varchar2(20) not null,
minit char,
primary key (sid));
--------------end-----------------
Good day!
null
Maybe you are looking for
-
IPod Touch is no longer under the devices list in 'My Computer' in a PC
I've read many discussions here and all the replies say that you can't use the iPod touch as a disk to store other files but I was using it like that before. Now it is no longer appearing under the removable devices under 'my computer' and I really d
-
I turned my iPod off last night and when I went to turn it back on, it got stuck on the logo. I tried to reboot it but it got stuck again. I waited about 15-20 minutes before rebooting it again. It got stuck once again. I plugged it into the computer
-
Mac osx startup disk has no more space available
I get the error message "Mac OS Startup disk has no more space available." I have run the resolution suggested on support helpsite. Still running very slow. Suggestions?
-
Help with Message Mapping - Context Change
I need help with the following message mapping. I am filtering by EMP_STAT in the Message Mapping. I have this working for the ROW structures, but I can get the HEADER/REC_COUNT field to calculate. I can do just a record count of ROW and get it to
-
Using (HttpServletResponse) externalContext.getResponse() in ADF aplication
Hi, I have written following code in my ADF aplication, inside bean, in a hope to generate HTML response, but it doesn't ruturn anything: public void pozoviServlet() { try { ExternalContext externalContext = FacesContext.getCurrentInstance().getExter