Problem when a JPanel with a JDialog regains focus

I've a simple application with a JFrame and a nested JDialog under MS Windows. When it regains focus (i.e. another application like MSWord was active and with Alt+Tab or with a mouse-click in taskbar I force my application to gain focus), the JDialog becomes active but I can't see the JPanel because between the dialog and the panel there is MSWord. In z-order I've get the dialog at top, under it MSWord and the panel at background. That's not the regular behavior, but sometimes it happens. Any idea to avoid always this behavior?
Thanks in advance.

Any solutions to this problem???

Similar Messages

Resolution problem when printing JPanel with picture on bg

Hellow!
I have some problems with printing JPanel component. I have a picture drawn on the background of the JPanel and several buttons on it. The whole JPanel is about 1600x800px. When i print whole the component with the help of PDF virtual printer, component is printed larger than A4 list. It is strange for me because print resolution is 600 dpi, so whole component must be a rectangle with the size about 2.5x1.5 inches. When I scale the graphics before painting component to fit image to page (i mean ... {color:#ff0000}g2d.scale(sc,sc); panel.paintAll(g2d);{color} ...), the picture's quality becomes very bad.
I understod it so: I draw the component on the paper in screen resolution, then I decrease image size, so quality also decreases.
My question is: how to draw on the graphics of printing paper the component in printers resolution (600dpi), but not in screen resolution.

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Hi! Has anybody succeeded in using Presonus Audio box 22 vsl with Os Mountain Lion? They doesn´t seem to connect. No problems when i used with Snow Leopard. I upgraded: Now is Kreonika not happy. Not happy at all!

Hi! Has anybody succeeded in using Presonus Audio box 22 vsl with Os Mountain Lion? They doesn´t seem to connect.
No problems when i used with Snow Leopard. I upgraded: Now Kreonika is not happy. Not happy at all!

In cases like this, if you have an Apple store near by, they will most likely install the OS free of charge for you, if you can't bring your Apple ID along to prove you've paid for it.
Would that work out for you?

Problems when someone shares with me it screen

I have a problem when someone shares his screen with me it happens only in my computer.
tried to clean the cache uninstall and install nothing shutdown the firewall nothing helps ....
Any idea ?
Thanks

Hello Sallo,
Issue seems to have occured in the past where it got fixed by removing kb2760556 KB2760512 one by one and after that installing them
again.
Is your machine Windows 7 machine with a home user interface like Aero theme enabled? can you move into Window 7 Basic version and give a try.
IIf we feel that its because of the patches , then we need to follow the methord of uninstalling patches one by and one and test the scenario each time
Sunilkumar

Problem when creating contract with foreign trade / customs

Hi,
I encountered a problem when creating contract / outline agreement.
I used ME31K to create a contract with a vendor outside of our country. I suppose that I should be able to see "Foreign Trade / Customs" in "Header" menu, but this entry is gray, I cannot enter it.
I tried to create a scheduling agreement using ME31L with the same vendor and material, I can see "Foreign Trade / Customs" information. I suppose these two process are similar, aren't they?
Btw., I checked the master data according to this thread:
http://help.sap.com/saphelp_46c/helpdata/en/ed/3b6cc697e711d1b4e20000e82d81b0/content.htm
Can anyone give me some hint?
Thanks!
Charlie

These two processes are different:
The Contract agreement or the Outline Agreement is that create the centrally contract (cross-plant) where it can maintain different pricing conditions for each and every plant. It creates the Release Order with reference to Outline Agreement. No detailed delivery schedule can be made in the Release Order. No Release documentation is created. Only time-dependent conditions can be created, Some Item Category 'M' and 'W' can be used.
Whereas the Scheduling Agreement is the Plant Location what must be entered in the Scheduling Agreement. Its no need to create any other purchasing document except for delivery schedule line via Transaction ME38 or MRP running (with the appropriate setting of Source List). Delivery Schedule line items are created subject to your specific requirement. It can create both Scheduling Agreement with or without release of Documentation (subject to the Document Type LP or LPA) with the selection of either FRC or JIT delivery schedule. Either time-dependent or time-independent conditions can be created subject to the customizing in the Document Type of the Scheduling Agreement. Item Category 'M' and 'W' can not be used.

Problem when creating Database with Database, OS and hardware Configuraiton

Problem when creating Database:
There are two problems, which I faced during creation of database. When creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
Problem # 1:
When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
I searched following oracle help for this problem.
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Problem # 2:
When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
I searched following oracle help for this problem.
ORA-12571: TNS:packet writer failure
Cause: An error occurred during a data send.
Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Software & Hardware Configuration are as follow:
Software:
Database
Oracle 8.1.7.0.0 (Oracle8i)
Operating System
Microsoft Windows 2000
5.00.2195
Service Pack 2
Hardware:
x86 Family 6 Model 8 stepping
10
AT/AT COMPITABLE
260,400 KB RAM

user563502 wrote:
I am working on Solaris 8. What is Alert_SID.log? where can I find it?
ThanksFor the responsible of the upgrade of Oracle database, not even know what Alert log is?
to be honest with you, this is not your work.

Itunes podcast problem when i sync. with my iphone 4

i downloads directly some podcasts on my iphone, so when i sync. with my itunes its deleting the new podcasts from my iphone ! ! ! i have to download it again.
even if i have choice ( dont sync. podcast, it will deleted it ?! if i choice sync. podcast so he will delete what i download on my iphone and but what i have in my library from itunes .......
any help ?

You can try deleting the iPod Photo Cache folder on your computer and then try to sync again. Read about it here.
http://support.apple.com/kb/TS1314

2 problem when syncing iphone with my mac.

On the last days whenever I connect my iPhone (2G 3.0) to my Mac (10.6.1) I get a message "applemobiledevicehelper quit unexpectedly". All I need to do is just click 'ignore' and then everything works fine with iTunes (9.0.1).
The problem is iPhoto (8.2), I cant see my iphone there. iPhoto isn't recognizing my iPhone.
This problem is also right with Image Capture.
Please any assistance.

Before you upgrade beyond 10.6.8 as in Michael Allbrittons post you need to have 10.6.8 on your computer.
Get more information about your computer. Go to the Apple in the upper left corner of any window, then "About This Mac". Write down what it says about "version"and report that here. Now continue to "More Info..." Copy and paste the information here, but omit the serial number and Hardware UUID (if present).
If you have a PPC Mac you cannot sync your idevice without a newer computer. See the end of this post for options.
If it says you have an Intel Mac you can upgrade to Snow Leopard, but check system requirements first:
Snow Leopard 10.6 Technical Requirements - http://support.apple.com/kb/SP575
You can buy Snow Leopard at:
Snow Leopard disc source - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
After installing run the updater to 10.6.8, then upgrade iTunes.
Jan. 2014 post by Kappy on doing all this: https://discussions.apple.com/message/24599931
Options if you cannot upgrade: iTunes Store purchases can already be downloaded directly. Use iTunes Match to put non-Store music in iCloud, then download to your device from there. Backup your device directly to iCloud over a wireless connection. Photos can be downloaded from the Camera Roll using iPhoto or Image Capture.
Incidentally, the post referenced by Michael Allbritton is two years old. If you can install Snow Leopard and your computer is new enough you also have the option to go straight to the latest OSX, Mavericks, for free, but that's another topic.

I have a problem when update tables with a database link (APEX)

Hi, I search answers for my problem and I not found a solution. My problem start when I open page with database link statement in APEX. I drop tables and execute this for update the tables in APEX.
EXECUTE IMMEDIATE 'CREATE TABLE XXXXXXX
AS
SELECT A1,A2,A3
FROM AAA@BBB';
I use Mozilla Firefox and isn't always updated the tables because it shows dialog for downloading file "f". I rename the file to txt and I see the text "IBMPC/WIN_NT-8.1.0"...
In the explorer always show a window only the text "IBMPC/WIN_NT-8.1.0"...
What is the solution for my problem? I need update this tables.
Thanks. John.

It's easy. It doesn't work a database link, on apex, with a pl/sql code or store procedure.
I saw that many people had the same problem but I don't see a solution.
As I put up, I want to remove my tables on APEX and copy the table of my Oracle database with the update dates.
The posts are from the same problem as my English is very bad, it got to help explain the problem.
I have a page with a pl/sql code. This code in Oracle is correctly.
For example, with this code I update the table PRUEBAS with the data of TABLEX.
BEGIN
BEGIN
EXECUTE IMMEDIATE 'DROP TABLE "PRUEBAS"';
EXCEPTION WHEN OTHERS THEN NULL;
END;
EXECUTE IMMEDIATE 'CREATE TABLE "PRUEBAS"
AS
SELECT AAA,
BBB,
CCC
FROM TABLEX';
END;
But, in this code, I have the problem.
BEGIN
BEGIN
EXECUTE IMMEDIATE 'DROP TABLE "PRUEBAS"';
EXCEPTION WHEN OTHERS THEN NULL;
END;
EXECUTE IMMEDIATE 'CREATE TABLE "PRUEBAS"
AS
SELECT AAA,
BBB,
CCC
FROM TABLEX@DB_LINK';
END;
I sometimes get an error. Sometimes it works fine, but half of the tries Apex returns "IBMPC/WIN_NT-8.1.0" in the browser and I am not using an IBM PC or Win NT...
And i read that In the alert_xe.log file there are a error of core dump... ... :S or that the application return corrupt headers.... Is a problem of versions?
I used a synonym and I have the same problem.
Even if I run the code on SQL COMMANDS (SQL WORKSHOP) it shows dialog for downloading file "f". I rename the file to txt and I see the text "IBMPC/WIN_NT-8.1.0"...
The problem is in Mozilla Firefox and in IE.
I have the OracleXE 10g (Application Express 3.0.1.00.08).
And the question is.. ... ... ... ... What is the solution? :)
Thanks.
John.

Statement terminator problems when exporting data with SQL Developer 3.2

I've ran across what appears to be a bug with SQL Developer 3.2.20.09. If someone can let me know if this is indeed a bug, or just something I need to configure differently, please let me know.
The problem is related to exporting a database as a SQL script, and terminator characters at the end of "create" statements, especially when columns have comments, and problems that occur when using SQLPlus to run the export script to create the tables. With the old SQL Developer 1.5.4, with the "Terminator" and "Pretty Print" options checked, statements like the following are generated:
-- DDL for Type NUM_ARRAY
CREATE OR REPLACE TYPE "NUM_ARRAY"
IS TABLE OF NUMBER(20)
-- DDL for Sequence MYTABLE_SEQ
CREATE SEQUENCE "MYTABLE_SEQ" MINVALUE 1 MAXVALUE 999999999999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE ;
-- DDL for Table MYTABLE
CREATE TABLE "MYTABLE"
(     "MYTABLE_ID" NUMBER,
     "COL2" NUMBER,
     "COL3" NUMBER
-- DDL for Table ANOTHERTABLE
CREATE TABLE "ANOTHERTABLE"
(     "ANOTHERTABLE_ID" NUMBER,
     "COL2" VARCHAR2(1024),
     "COL3" VARCHAR2(1024)
COMMENT ON COLUMN "ANOTHERTABLE"."ANOTHERTABLE_ID" IS 'This is a comment.';
When I then run the script using SQLPlus, everything works fine. However, with SQL Developer 3.2.20.09, with the same options enabled, the same statements are generated like this:
-- DDL for Type NUM_ARRAY
CREATE OR REPLACE TYPE "NUM_ARRAY"
IS TABLE OF NUMBER(20)
-- DDL for Sequence MYTABLE_SEQ
CREATE SEQUENCE "MYTABLE_SEQ" MINVALUE 1 MAXVALUE 999999999999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE ;
-- DDL for Table MYTABLE
CREATE TABLE "MYTABLE"
(     "MYTABLE_ID" NUMBER,
     "COL2" NUMBER,
     "COL3" NUMBER
-- DDL for Table ANOTHERTABLE
CREATE TABLE "ANOTHERTABLE"
(     "ANOTHERTABLE_ID" NUMBER,
     "COL2" VARCHAR2(1024),
     "COL3" VARCHAR2(1024)
COMMENT ON COLUMN "ANOTHERTABLE"."ANOTHERTABLE_ID" IS 'This is a comment.';
Notice all of the extra slashes in there. If a slash is not used as a statement terminator, SQLPlus treats slashes as a command to repeat the last SQL statement, which causes many errors about tables or sequences already existing. So, I tried removing the "Terminator" flag from the export options. This lead to statements that looked a bit more promising:
-- DDL for Type NUM_ARRAY
CREATE OR REPLACE TYPE "NUM_ARRAY"
IS TABLE OF NUMBER(20)
-- DDL for Sequence MYTABLE_SEQ
CREATE SEQUENCE "MYTABLE_SEQ" MINVALUE 1 MAXVALUE 999999999999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE
-- DDL for Table MYTABLE
CREATE TABLE "MYTABLE"
(     "MYTABLE_ID" NUMBER,
     "COL2" NUMBER,
     "COL3" NUMBER
-- DDL for Table ANOTHERTABLE
CREATE TABLE "ANOTHERTABLE"
(     "ANOTHERTABLE_ID" NUMBER,
     "COL2" VARCHAR2(1024),
     "COL3" VARCHAR2(1024)
COMMENT ON COLUMN "ANOTHERTABLE"."ANOTHERTABLE_ID" IS 'This is a comment.'
The big problem, though, is in the statement for the table with a comment. Notice that there are two statements, but there is not a semicolon after either of them. This unfortunately causes the "COMMENT" statement to be appended to the "CREATE TABLE" statement before being executed, which causes the table to not be created (which causes even more errors later on when the script attempts to populate the table with data).
So, it would appear that this is a bug, but I'm not sure. Is there a way I can configure the export options to make SQL Developer export these statements like it used to in older versions?
Thanks,
-Bill

>
So, it would appear that this is a bug, but I'm not sure.
>
That would be a bug. Thanks for reporting it and providing the detailed example.
>
Is there a way I can configure the export options to make SQL Developer export these statements like it used to in older versions?
>
No.
Leave the thread open. One of the developers for sql developer should be monitoring the forum and can provide more information.

NIO: Strange problem when using ByteBuffer with non-blocking SocketChannel

Hi,
I have a server that uses multiplexed, non-blocking I/O with java.nio. When a client connects, the server waits for the message: <system cmd="knock"/>, returns a message and disconnects the client. The clients are shortly serviced in less than a second.
But the server newer receive anything from about 20% of the clients - even though it is sent. Or with other words: it is received and the data is contained in the ByteBuffer - SocketChannel.read(ByteBuffer) - but a call to ByteBuffer.remaing() returns 0 !!
ByteBuffer receiveBuf = ByteBuffer.allocate(65536);
receiveBuf.clear(); // the code is elsewhere used for longer living clients
int readBytes = channel.read(receiveBuf);
receiveBuf.flip();
StringBuffer sb = new StringBuffer();
System.out.println(" * Remaining: "+receiveBuf.remaining()); // writes: ' * Remaining: 0'
System.out.println(" * Received: "+new String(receiveBuf.array())); // writes: ' * Received: <system cmd="knock"/>'
while(receiveBuf.remaining() >= 2) {
byte b = receiveBuf.get();
sb.append((char)b);
System.out.println(" * sb content: "+sb.toString()); // writes: ' * sb content: 'The ByteBuffer clearly receives the correct data, but the ByteBuffer.remaining() returns 0 and therefore the StringBuffer will never have any content.
The problem seems to occur randomly and for about 20% of the clients (simulated from the same computer and therefore has the same bandwidth and so on).
Anyone knows what is going on, and how to solve the problem !?

It's always possible in any read that the number of bytes read is less than the number of bytes requested. You need to keep reading until you have got everything you expected, and cope with every possible error condition on each iteration.
EJP

How to solve crash problem when doing "package" with Indesign CS 5.5?

Hello everyone,
I've been having trouble with Indesign CS 5.5 when I use the package tool.
I work with indesign for a long time, create my document files, and when everything is done, finished, i go and do the Package.
But at a certain point it crashes and the file becomes demaged... even the original one i've worked initially!!
This happens everytime...
Does anyone ever had this problem?
Need your help guys?
Thanks

This is not normal behavior. I wonder what is different for you.
If you deselect "Check Links Before Opening Document," you should not be prompted to "Do not Update Links." This suggest you have corrupt preferences. So try:
Trash, Replace, Reset, or Restore the application Preferences: http://forums.adobe.com/thread/526990

Problem when defining correlation with subsequent Async Receive Step.

Hi, all:
We have defined a BMP process, like below:
Receive (Start Process) --> Sync Send --> Sync Send --- Async Send
Now we need to have additional steps added into the process: Async Receive.
Now we have problem defining the correlation:
   Since this Async step is not the start of the process, we have to use correlation, if we leave it blank, a red question mark stays, and we can not active BPM.
   When we define the correlation, we just expect one message type to be received from a Async system.
   In the correlation condition editor window, we would like to choose "Interface Variable" and assign value to the container element that reference the asbtract interface.
   however, when we selection optiontb "Interface Variable", there is value "interface" already fill up, we can not select container element from the elements list.
Any one has such experience ?
Thanks in advance !
John

Hi
I think you are facing problem with corrrelation. Follow this procedure to define correlation : -
1. Switch from Container window to Correlation List, here define a correlation variable.
2. Now switch from Graphical Editor to Correlation Editor.
3. There in Correlation Name choose your Correlation variable.
4. In the Correlation Container define a variable.
5. In Involved Message window choose your message interfaces that are used to correlate. Here you should have message interface of your second receive step with another message interface.
6. Now in correlation editor's Properties window assign field of your involved message interface to the variable that you have defined in 4th step.
7. Now switch to Graphical Editor of you BPM. And Activate your correlation in First receive step and Use Correlation it in subsequent receive step.
This is the whole procedure to define a correlation and use it.
If you need further clarification plz revert.
Regards,
Sami.
Reward pointa if helpful.

Navigation problem when using tiles with JSF

Hi all,
I m using tiles with JSF. i have included all the libraries and jsp page is rendered properly. but when i use <h:commandLink> in the body part of the JSP , i cannot go to the specified link. when we use tiles, what changes need to be done in faces-config file?? i mean what navigation rule we need to specify ??

Hello, I have the same problem; JSF+Tiles = No navigation.
One basic question is should I reference the parent jsp or the included body jsp in the faces-config.xml file.
For example: The login.jsp is a main tiles page that includes a menu.jsp, header.jsp & a loginBody.jsp.
Hence the faces-config could have this rule;
<navigation-rule>
<from-view-id>/login.jsp</from-view-id>
<navigation-case>
<to-view-id>/catalog.jsp</to-view-id>
</navigation-case>
</navigation-rule>
(I've left the outcome tag out to simplify this post)
Or, I could refer loginBody.jsp in the navigation rule;
<navigation-rule>
<from-view-id>/loginBody.jsp</from-view-id>
<navigation-case>
<to-view-id>/catalog.jsp</to-view-id>
</navigation-case>
</navigation-rule>
The loginBody.jsp has a commandbutton which a user clicks which starts the navigation.
Neither seems to work unfortunately & I'm a stuck.
Thanks

Problem when sending mails with excel attached

Hi
I'm tryin to send mails via SAPOffice with attached excel documents. I'm using FM SO_NEW_DOCUMENT_ATT_SEND_API1. I have a problem with the code. Here I post it:
DATA: ti_objbin    LIKE solisti1   OCCURS 150 WITH HEADER LINE,
ti_objhex    LIKE solix      OCCURS 150 WITH HEADER LINE.
DATA: BEGIN OF i_excel,
sobid(8) TYPE c,
tab1 TYPE X VALUE 09, "tab code
name(80) TYPE c,
tab2 TYPE X VALUE 09, "tab code
city(40) TYPE c,
tab3 TYPE X VALUE 09, "tab code
kostl(10) TYPE c,
tab4 TYPE X VALUE 09, "tab code
ktext(20) TYPE c,
tab5 TYPE X VALUE 09, "tab code
fasig(10) TYPE c,
tab6 TYPE X VALUE 09, "tab code
ruta(255) TYPE c,
fin TYPE X VALUE 13, "carriage return
END OF i_excel.
i_excel-sobid        = wa_datos-sobid.
i_excel-name         = wa_datos-name.
i_excel-city         = wa_datos-city.
i_excel-kostl        = wa_datos-kostl.
i_excel-ktext        = wa_datos-ktext.
i_excel-fasig        = wa_datos-fasig.
i_excel-ruta         = wa_datos-ruta.
WRITE i_excel TO ti_objbin-line.
APPEND ti_objbin.
CLEAR ti_objbin.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data              = docdata
put_in_outbox              = 'X'
TABLES
packing_list               = ti_objpack
object_header              = ti_objhead
contents_bin               = ti_objbin
contents_txt               = ti_objtxt
*      contents_hex               = ti_objhex
receivers                  = ti_reclist
EXCEPTIONS
too_many_receivers         = 1
document_not_sent          = 2
document_type_not_exist    = 3
operation_no_authorization = 4
parameter_error            = 5
x_error                    = 6
enqueue_error              = 7
OTHERS                     = 8.
I have used this code before, in 4.6C release and it works fine, but now I'm on ECC5.0 and when i check the code, the next error message is generated: ""I_EXCEL" cannot be converted to a character-type field." If i try using MOVE i_excel TO i_objbin-line instead of WRITE, the error message changes to: ""TI_OBJBIN-LINE" and "I_EXCEL" are not mutually convertible in a Unicode program. program.". I have tried using ti_objhex table instead of ti_objbin in order to use 'context_hex' parameter (instead of 'context_bin') on FM, but i get the same result.
I've been searching any other FM to do this, and i've found more FM of SOI1 function group but i didn´t get the expected result. So i need to send the message with the excel attached, using this FM or any other, but I need some help. Anyone can help me?
Thanks and Regards

hi this is a simple example to send the excel sheet as a mail
TABLES: ekko.
PARAMETERS: p_email   TYPE somlreci1-receiver .
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
      wa_ekpo TYPE t_ekpo.
TYPES: BEGIN OF t_charekpo,
ebeln(10) TYPE c,
ebelp(5) TYPE c,
aedat(8) TYPE c,
matnr(18) TYPE c,
END OF t_charekpo.
DATA: wa_charekpo TYPE t_charekpo.
DATA:   it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                WITH HEADER LINE.
DATA:   it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                WITH HEADER LINE.
DATA:   t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
        t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
        t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        w_cnt TYPE i,
        w_sent_all(1) TYPE c,
        w_doc_data LIKE sodocchgi1,
        gd_error    TYPE sy-subrc,
        gd_reciever TYPE sy-subrc.
*START_OF_SELECTION
START-OF-SELECTION.
Retrieve sample data from table ekpo
PERFORM data_retrieval.
Populate table with detaisl to be entered into .xls file
PERFORM build_xls_data_table.
*END-OF-SELECTION
END-OF-SELECTION.
Populate message body text
perform populate_email_message_body.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
                               tables it_message
                                      it_attach
                                using p_email
                                      'Example .xls documnet attachment'
                                      'XLS'
                                      'filename'
                             changing gd_error
                                      gd_reciever.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM initiate_mail_execute_program.
*&      Form DATA_RETRIEVAL
      Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT ebeln ebelp aedat matnr
   UP TO 10 ROWS
    FROM ekpo
    INTO TABLE it_ekpo.
ENDFORM.                    " DATA_RETRIEVAL
*&      Form BUILD_XLS_DATA_TABLE
      Build data table for .xls document
FORM build_xls_data_table.
data: ld_store(50) type c. "Leading zeros
CONSTANTS: con_cret(5) TYPE c VALUE '0D', "OK for non Unicode
             con_tab(5) TYPE c VALUE '09'.   "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
*constants:
   con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
   con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR' INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
LOOP AT it_ekpo INTO wa_charekpo.
*Modification to retain leading zeros
inserts code for excell REPLACE command into ld_store
=REPLACE("00100",1,5,"00100")
    concatenate '=REPLACE("' wa_charekpo-ebelp '",1,5,"'
                             wa_charekpo-ebelp '")' into ld_store .
concatenate ld_store into .xls file instead of actual value(ebelp)
    CONCATENATE wa_charekpo-ebeln ld_store wa_charekpo-aedat wa_charekpo-matnr INTO it_attach SEPARATED BY con_tab.
    CONCATENATE con_cret it_attach INTO it_attach.
    APPEND it_attach.
ENDLOOP.
ENDFORM.                    " BUILD_XLS_DATA_TABLE
*&      Form SEND_FILE_AS_EMAIL_ATTACHMENT
      Send email
FORM send_file_as_email_attachment tables pit_message
                                          pit_attach
                                    using p_email
                                          p_mtitle
                                          p_format
                                          p_filename
                                          p_attdescription
                                          p_sender_address
                                          p_sender_addres_type
                                 changing p_error
                                          p_reciever.
DATA: ld_error    TYPE sy-subrc,
        ld_reciever TYPE sy-subrc,
        ld_mtitle LIKE sodocchgi1-obj_descr,
        ld_email LIKE somlreci1-receiver,
        ld_format TYPE so_obj_tp ,
        ld_attdescription TYPE so_obj_nam ,
        ld_attfilename TYPE so_obj_des ,
        ld_sender_address LIKE soextreci1-receiver,
        ld_sender_address_type LIKE soextreci1-adr_typ,
        ld_receiver LIKE sy-subrc.
ld_email   = p_email.
ld_mtitle = p_mtitle.
ld_format              = p_format.
ld_attdescription      = p_attdescription.
ld_attfilename         = p_filename.
ld_sender_address      = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name   = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = pit_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num   = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type   = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name   = ld_attfilename.
t_packing_list-doc_size   = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
            document_data              = w_doc_data
            put_in_outbox              = 'X'
            sender_address             = ld_sender_address
            sender_address_type        = ld_sender_address_type
            commit_work                = 'X'
       IMPORTING
            sent_to_all                = w_sent_all
       TABLES
            packing_list               = t_packing_list
            contents_bin               = t_attachment
            contents_txt               = it_message
            receivers                  = t_receivers
       EXCEPTIONS
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            OTHERS                     = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
    ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
*&      Form INITIATE_MAIL_EXECUTE_PROGRAM
      Instructs mail send program for SAPCONNECT to send email.
FORM initiate_mail_execute_program.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
                WITH output = 'X'
                AND RETURN.
ENDFORM.                    " INITIATE_MAIL_EXECUTE_PROGRAM
*&      Form POPULATE_EMAIL_MESSAGE_BODY
       Populate message body text
form populate_email_message_body.
REFRESH it_message.
it_message = 'Please find attached a list test ekpo records'.
APPEND it_message.
endform.                    " POPULATE_EMAIL_MESSAGE_BODY
regards,
venkat.

Problem when a JPanel with a JDialog regains focus

Similar Messages

Maybe you are looking for