Problem when assigning image frame style via EDD

Hi all, it seems this is a bug - or am I missing something?
In the EDD, I use context rules to assign an object style to image elements. In this example, I simply assign "intitle" to all images for convenience.
When I open a DITA file and select an anchored frame, the dialog box tells me that the correct style "intitle" is assigned. However, the frame does not catch it's display setting, which in the example, is "in paragraph, and uses a default setting "below current line" instead.
Only after I select "keep" in the drop down list and then change back to "intitle" and click Apply, the frame applies the correct settings as defined in the object style.
Any ideas?

ok thank you!
now i have more questions!
does the version of quicktime I have on my hard drive (10.0) affect the version of quicktime that final cut exports to or is it just affecting how it's played back outside of the final cut interface?
I just realized when I watch the exported mov file in RealPlayer (10.1.0) that jumbly image stuff doesn't happen, but there are still a few places where it seems like frames are dropped. RealPlayer is actually the only player on my computer that will play the movie in its correct aspect ratio, too.
In order to upload the file to youtube however, I export it to quicktime and then in quicktime do "save for web." When I try uploading the file to youtube without doing that first, the audio/video un-syncs and stuff. But there's no option in realplayer to save for web or to save at all, so i don't know how to get to that step.
if i needed an older version of quicktime, how would i go about that?

Similar Messages

Refreshment problem when place image.

Hi Experts,
When I insert image using script then there is a refreshment problem.
In place of second image there place first image.
while if I debug this it place in correct order. But in Run case script not place image in order.
There is a refreshment problem After place First image it not refresh and have first image.
How solve this problem That i place image in proper order in Script Run mode.
#target indesign
var myDocument=app.activeDocument; //Active document have 10 spread with text frame
for(int i=0; i<10;i++)
var ImagePath="D:\Indesign\" + i + ".indd"; // There are 0.indd to 9.indd, 10 image in "D:\Indesign\"
var myTextFrame=myDocument.spreads.item(i).textFrames.firstItem();
myTextFrame.place(File(ImagePath)); // ImagePath is path of image
Thanks.

My problem is like this :
I want place image in a text box
File(menu)-->place....-->(Dialog open then Select Image file then click on open)->then image is attach with cursor. (I do not click on .indd open screen).
Now I run the script from ExtendedTool Kit
#target indesign
var myDocument=app.activeDocument;
var myTextFrame=myDocument.spreads.item(0).textFrames.firstItem();
$.sleep(2000);
myTextFrame.place(File("/C/DOCUME~1/ADMINI~1/LOCALS~1/Temp/temp.jpg"));
$.sleep(2000);
var graphic=myTextFrame.allGraphics[0];
graphic.select(SelectionOptions.REPLACE_WITH);
graphic.geometricBounds =["-47.853527","-157.370275","1231.018230","709.576702"];
When this script run then it place the image which I am select from File(menu)-->place....-->(Dialog open then Select Image file then click on open).
Not from the path "/C/DOCUME~1/ADMINI~1/LOCALS~1/Temp/temp.jpg"
This is the problem to place image. So there is image duplicasy and some image missing.
Is there is solution of this problem ?
How remove image which is already attach with cursor ?
Thanks.

Problem when displaying images when working with PHP, mysql and dreamweaver in a brower

Hey Guys
I am new to dynamic development but I already did some
research and tutorials about how to get a dynamic web site working
with PHP and Mysql in Dreamweaver. I set up a test page to view
some content on it directly from the mysql database and it worked
just fine in dreamweaver only when I pressed the
live data view.
When I tried to view the same page using the browser preview
with firefox and internet explorer, plain text from the database
was correctly displayed on the brower but the images were absent.
In the mysql database I used the varchar as my picture data
type field so that I will refer in dreamweaver in the data binding
panel in the img.src to the picture column of my database.
I anyone can tell me what am I doing wrong so that my
pictures are not displayed in the browser when i click the browser
preview facility in dreamweaver I would be very very and very
pleased ! :)

The odds are that it is the way that you have referenced the
images rather
than an issue with the database. If you have the images root
relative like
this "/images" then they will work in preview, and on the
webserver, but
will not view when looking at the file via localhost.
If possible make the links page relative and then they should
work fine.
Paul Whitham
Certified Dreamweaver MX2004 Professional
Adobe Community Expert - Dreamweaver
Valleybiz Internet Design
www.valleybiz.net
"mariosal026" <[email protected]> wrote in
message
news:ea3nq2$9ol$[email protected]..
> Hey Guys
>
> I am new to dynamic development but I already did some
research and
> tutorials
> about how to get a dynamic web site working with PHP and
Mysql in
> Dreamweaver.
> I set up a test page to view some content on it directly
from the mysql
> database and it worked just fine in dreamweaver only
when I pressed the
>
live
> data view.
>
> When I tried to view the same page using the browser
preview with firefox
> and
> internet explorer, plain text from the database was
correctly displayed on
> the
> brower but the images were absent.
>
> In the mysql database I used the varchar as my picture
data type field so
> that
> I will refer in dreamweaver in the data binding panel in
the img.src to
> the
> picture column of my database.
>
> I anyone can tell me what am I doing wrong so that my
pictures are not
> displayed in the browser when i click the browser
preview facility in
> dreamweaver I would be very very and very pleased ! :)
>

Bullet problem when creating text frames and tables in InDesign CS5

Every time I create a new text frame or table in InDesign CS5 and paste information there, the first row in the table or several lines of text come out with bullet points. I'm sure this is a setting or style at some point I created and now am unsure of how to delete. I would like the new text frames and tables to not include bullet points as a default when imported or pasted. Any thoughts? Thanks!

Defaults for text in the current document are made with no text selected. Turn off bullets and they should stay off (but check the styles, too, you might have accidentally set a bulleted style as the defualt and you should change the default style instead). If this is happening in all files, you need to do it with nothing open to reset the default for all new documents (existing files, unfortunately, need to be fixed one at a time).

"The volume for "IMAGE.JPG" cannot be found" problem when importing images

This first started when I hooked up my card reader to my mac. I'd get the above image when I tried to import files off of it. My options are"
- Cancel - Find Photo… - OK -
OK = Nothing. It flashes and stays.
Find Photo = Navigating to the image, (all the others are grayed out except the one it says it can't find)
Cancel = This actually loads the image, but then the next image has the same issue. Forcing a quit seems to be the only way out.
I want to like apple but this stinks and is unusable.

This sometimes occurs if you’re importing a file into iPhoto and there’s already a file there with the same name. Digital cameras can produce many, many files with the same name over their lifetime, so it’s not uncommon to have several files called IMG_00543.JPG, for instance. Now you want to import one also called this.
What happens is that iPhoto compares the two files to check for duplicates. However, if iPhoto cannot find the file already in the database for comparison, then you get this message. It suggests that your database is damaged because iPhoto has lost track of this (or these) similarly named files.
A simple test is to rename the file you are importing - just add a character - IMG_00543a.JPG for instance. If this then imports with no issue then you might consider rebuilding your library:
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Display problem when connecting laptop to TV via HDMI

I have a Satellite L500-19X and when I connect the laptop to my Sony Bravia TV, the display is constantly choppy.
I've tried changing the refresh rate but that hasn't helped. The HDMI cable shouldn't be the problem because it works fine with my Xbox. The problem is there during both duplicate display and extend display options.
Anyone else experiencing the same problem and have found a fix?
Thanks

> The problem is there during both duplicate display and extend display options.
And when you see desktop on TV only?

Noise Ninja Problem when downloading images from Epson P-3000 hard drive

I've just downloaded JPEG images from my Epson P-3000 hard drive and when I try to sharpen the images using Noise Ninja plug-in in Aperture I get the following error message: Editing Error. This image cannot be rendered for editing because Aperture does not support the image format. I don't have any issues using Noise Ninja with other images (using latest Aperture version) and this is the first time i've downloaded images from the Epson rather than my memory card. I'm wondering if the issue is related to the Epson. The metadata of the image in Aperture confirms that the image is a JPEG so I'm not sure what's going on.

I've just downloaded JPEG images from my Epson P-3000 hard drive and when I try to sharpen the images using Noise Ninja plug-in in Aperture I get the following error message: Editing Error. This image cannot be rendered for editing because Aperture does not support the image format. I don't have any issues using Noise Ninja with other images (using latest Aperture version) and this is the first time i've downloaded images from the Epson rather than my memory card. I'm wondering if the issue is related to the Epson. The metadata of the image in Aperture confirms that the image is a JPEG so I'm not sure what's going on.

Problem when assigning Baseline having Actuals

In P6 while assigning a Revised Baseline which has activities with actual start, the columns for early start displays the dates only from the remaining early start of the baseline or the data date of the update.
The actual start dates are not reflected in the early start fields as was possible in p3.
The actual start is displayed if we introduce additional column for the actual start but not in the ealry start with an A suffix which was the case in p3.
Anyone with solutions? is it a P6 bug?

I found out the solution myself as follows:
We need to do a global change to solve this problem.
Here is how to do the Global Change:
To set an updated schedule as a baseline, we should first set the Planned Dates equal to Current Dates by using global change. Because P6 uses Planned Dates of your baseline. (In a schedule where no activities are started, PL Dates= Current Dates. )
Planned Start=Start
Planned Finish=Finish.
By equating planned and current dates, we will be enabled to see our updated schedule’s dates as baseline dates in the current schedule. (Provided that we assigned the baseline properly). However, during the global change operation we will notice that Activity % Complete Values and Original Durations of the activities will be changed. But if the main point is to compare date information, this method will solve our problem.
Note: The above solution was borrowed from some previous posts which now i am unable to retreive, but thankful to the author. helped me a lot in similar situations.

Problem when post G/L Document via BAPI_ACC_GL_POSTING_POST

What I am doing is to post new G/L Accounting Document on each successfully paid transaction, each successfully reversed transaction, each rejected transaction for bank XXX, and each payment transaction for bank YYY in 3 Events respectively. And I am using the BAPI BAPI_ACC_GL_POSTING_POST to post.
but in the return table there are error messages, the sample code is as follows:
*& Get the OBJ_KEY of DOCUMENTHEADER *
get the current fiscal year
   l_fiscyear = sy-datum(4).
select the Number Range NO. out from T003
   select single numkr
      from t003
       into l_numkr
    where blart = 'SY'.
if sy-subrc <> 0.
    message .
endif.
call FM to get the Accounting Doc. No.
call function 'NUMBER_GET_NEXT'
    exporting
       nr_range_nr = l_numkr
           object      = RF_BELEG
      subobject      = HKHK
          toyear      = l_fiscyear
      importing
          number = p_belnr
      exceptions
        interval_not_found = 1
        number_range_not_intern = 2
        object_not_found = 3
        quantity_is_0 = 4
        quantity_is_not_1 = 5
        interval_overflow = 6
        buffer_overflow = 7
        others = 8.
if sy-subrc <> 0.
message
endif.
concatenate the Accountint Doc. No, the company code and the
fiscal year together as the OBJ_KEY
concatenate p_belnr HKHK' l_fiscyear into lx_docheader-obj_key.
&--Get OBJ_KEY end--
get the OBJ_SYS
select single logsys
              from t000
              into lx_docheader-obj_sys
            where mandt = sy-mandt.
if sy-subrc <> 0.
message
endif.
fill the structure parameter DOCUMENTHEADER of the BAPI
lx_docheader-obj_type = 'BKPFF'.
lx_docheader-username = sy-uname.
lx_docheader-comp_code = 'HKHK'.
lx_docheader-ac_doc_no = p_belnr.
lx_docheader-fisc_year = l_fiscyear.
lx_docheader-doc_date = p_doc_date.
lx_docheader-pstng_date = p_post_date.
lx_docheader-doc_type = SY.
fill the table parameter ACCOUNTGL of the BAPI
lwa_tabaccgl-itemno_acc = 1.
lwa_tabaccgl-gl_account = 0000050107 .
lwa_tabaccgl-comp_code = HKHK.
lwa_tabaccgl-pstng_date = p_post_date.
lwa_tabaccgl-doc_type = SY.
lwa_tabaccgl-ac_doc_no = p_belnr.
lwa_tabaccgl-fisc_year = l_fiscyear.
append lwa_tabaccgl to li_tabaccgl.
clear lwa_tabaccgl.
lwa_tabaccgl-itemno_acc = 2.
lwa_tabaccgl-gl_account = 0000082910.
lwa_tabaccgl-comp_code = HKHK.
lwa_tabaccgl-pstng_date = p_post_date.
lwa_tabaccgl-doc_type = SY.
lwa_tabaccgl-ac_doc_no = p_belnr.
lwa_tabaccgl-fisc_year = l_fiscyear.
lwa_tabaccgl-costcenter = 0000011401.
append lwa_tabaccgl to li_tabaccgl.
clear lwa_tabaccgl.
fill the table parameter CURRENCYAMOUNT of the BAPI
lwa_tabcurramt-itemno_acc = 1.
lwa_tabcurramt-currency = HKD.
lwa_tabcurramt-amt_doccur = 1.5-.
append lwa_tabcurramt to li_tabcurramt.
clear lwa_tabcurramt.
lwa_tabcurramt-itemno_acc = 2.
lwa_tabcurramt-currency = HKD.
lwa_tabcurramt-amt_doccur = 1.5.
append lwa_tabcurramt to li_tabcurramt.
clear lwa_tabcurramt.
Call BAPI to post the FI-GL Document
call function 'BAPI_ACC_GL_POSTING_POST'
      exporting
      documentheader = lx_docheader
      tables
      accountgl = li_tabaccgl
      currencyamount = li_tabcurramt
      return = li_tabreturn.
The return table says:
Error in document: BKPFF 1200000068HKCG2007 UD1CLNT120
Field Value date is a required field for G/L account HKCG 50107
would you experts please tell me what's the problem is?? it's emergency, thanks in a million advance.

Hi
U haven't to transfer the reference data to the BAPI, the document number is picked up automatically:
* fill the structure parameter DOCUMENTHEADER of the BAPI
*    LX_DOCHEADER-OBJ_TYPE = 'BKPFF'.
    LX_DOCHEADER-USERNAME = SY-UNAME.
    LX_DOCHEADER-COMP_CODE = 'HKHK'.
*    LX_DOCHEADER-AC_DOC_NO = P_BELNR.
*    LX_DOCHEADER-FISC_YEAR = L_FISCYEAR.
    LX_DOCHEADER-DOC_DATE = P_DOC_DATE.
    LX_DOCHEADER-PSTNG_DATE = P_POST_DATE.
    LX_DOCHEADER-DOC_TYPE = SY.
* fill the table parameter ACCOUNTGL of the BAPI
    LWA_TABACCGL-ITEMNO_ACC = 1.
    LWA_TABACCGL-GL_ACCOUNT = 0000050107 .
    LWA_TABACCGL-COMP_CODE = HKHK.
    LWA_TABACCGL-PSTNG_DATE = P_POST_DATE.
    LWA_TABACCGL-DOC_TYPE = SY.
*    LWA_TABACCGL-AC_DOC_NO = P_BELNR.
*    LWA_TABACCGL-FISC_YEAR = L_FISCYEAR.
    APPEND LWA_TABACCGL TO LI_TABACCGL.
    CLEAR LWA_TABACCGL.
    LWA_TABACCGL-ITEMNO_ACC = 2.
    LWA_TABACCGL-GL_ACCOUNT = 0000082910.
    LWA_TABACCGL-COMP_CODE = HKHK.
    LWA_TABACCGL-PSTNG_DATE = P_POST_DATE.
    LWA_TABACCGL-DOC_TYPE = SY.
*    LWA_TABACCGL-AC_DOC_NO = P_BELNR.
*    LWA_TABACCGL-FISC_YEAR = L_FISCYEAR.
    LWA_TABACCGL-COSTCENTER = 0000011401.
    APPEND LWA_TABACCGL TO LI_TABACCGL.
    CLEAR LWA_TABACCGL.
Max

CS 5.5: Problem when Flattening image? Dimension change by 1px ...

Hello,
I created a plus sign (+) and then I rotated it by 45 degrees to become a cross (x).
The cross has 16px by 16px. When I flatten it using "Flatten Selection" the cross becomes 17px by 16px even if it seems the same.
What is wrong? And how can I fix this?
Thank You,
Miguel

That was my guess
Craig Wollman
Word of Mouth Productions
phone 212 928 9581
fax 212 928 9582
159-00 Riverside Drive West #5H-70
NY, NY 10032
www.wordofmouthpros.com
"openspark" <[email protected]> wrote in
message
news:e1e1pc$183$[email protected]..
> The original code does not work because the rect of the
sprite is not
> updated
> after each command. This will also work...
>
> sprite(1).left = sprite(1).left - 5
> updateStage
> sprite(1).right = sprite(1).right + 5
> updateStage
>
> ... but it uses many more CPU cycles
>

Color problems when loading images

I load card from camera (Canon EOS 700D) and they show fine. But when I hit import the colors go bad and take on a greenish tint. If I hit reset in the develop mode the colors go back to normal. It's a windows 7 PC with Lightroom 5. Colors also show fine on camera LCD.

Sounds like you are applying a Preset during Import. Check your Import panel.

Image format not working automatically when linking to Frame files

I have a project in RoboHelp that has linked Frame files. I've fiddled with the settings until I can update and publish without having to make any changes to most of the RoboHelp project's files. However, there is a problem with the images. My group's standard is to center the images. All the settings are set for that. However, they are left-aligned in the generated CHM file, unless I double click one image in each topic to open the Image Properties box, make NO changes, and click OK to close the Image Properties box. I've checked the HTML code before and after doing this, and there is no change, but then all the images in each topic that I did this to will appear centered in the generated CHM file. Since I have about 100+ graphics in this project, it would be nice if I could get the settings to take effect without having to go through this exercise. Anyone know how to make RoboHelp recognize the settings without having to touch an image in each topic in the project?

Sure, here is the HTML code for one of the images. All the images I've checked, working or not, have identical code except of course the reference to the image file.
<div style="text-align: center;">
<img alt="SSI_User_Manual_Chapter0200004.png" id="image4" src="SSI_User_Manual_Chapter0200004.png"
style="margin-left: 0px; margin-top: 0px; margin-right: 0px; margin-bottom: 0px;"
width="494" height="331" border="0" />
</div>
I searched the CSS and do not find duplicate entries. Perhaps the <div style="text-align: center;"> is a problem? I believe that RH is adding that because the graphics were centered in FrameMaker. It is not in my CSS.

I am having the problem when trying to take a panorama picture. It may only take the first frame or doesn't even start at all when I press the shutter button. even though when i hold the phone straight up and down, so that camera is at the top

I am having the problem when trying to take a panorama picture.
It may only take the first frame or doesn't even start at all when I press the shutter button.
even though when i hold the phone straight up and down, so that camera is at the top on the back and the home button is on the bottom on the front.
This problem is irritating me....?

To take panorama
- ensure that the panorama option is on
- press the shutter button once
- you will see a line with an arrow
- move around in a circle ( I keep the camera steady and turn myself around in a circle)
- as you do this you will see the arrow moving across the screen as it captures pictures
- at the end of the capture, you will be able to see your panorama picture
I hope that this helps, do report back.

I am using Lightroom 5 and am hapy about it, but recently I hav encountered a problem when trying to edit an image in another program, i.e. Elements. I used the clone tool, saved the result and went back to Lightroom to open the image there. I did find a

I am using Lightroom 5 and am hapy about it, but recently I hav encountered a problem when trying to edit an image in another program, i.e. Elements. I used the clone tool, saved the result and went back to Lightroom to open the image there. I did find a second copy, but this is identic with the one I already had in Lightroom, and I can see noe result of the clone process.

At the moment I would say it is uncertain whether Acrobat is completely ignoring the change, or whether the changes you are making aren't affecting the ink density. I have a suggestion for a test you could make to see which is the case.
When editing in Photoshop just add a box or mark on the image, for your tests.
- If this box does not appear in Acrobat, you know Acrobat is not seeing the edit
- If this box does appear in Acrobat, you know the problem is that your tool for changing ink densities is not taking effect.

Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt

Problem when assigning image frame style via EDD

Similar Messages

Maybe you are looking for