Problem when changing the target quantity for a contract

Hello,
I have a problem when i try to change the target quantity for a contract through the BAPI 'BAPI_CONTRACT_CHANGE'.
I filled the tables 'item' and 'itemx' with new values. the BAPI 'BAPI_CONTRACT_CHANGE' returns no error, but after using the BAPI 'BAPI_TRANSACTION_COMMIT' I get an info message from SAP and the modification does not pass.
In debugger I could locate the error. In fact, the appeal of FM 'ME_UPDATE_DOCUMENT is done with a table XEKKN with the new values of the quantity and a KZ code equal to ' I ' to insert, then it must have the value ' U 'for update .
Is someone can help me to solve this problem?
Thank you in advance.

Have you tried selecting the page, and then changing the theme directly on that page?

Similar Messages

  • When changing the drive letter for the ipod itunes still wont come up

    when changing the letter a couple of times itunes wont come up and trying to restore it nothing happens i have reinstalled itunes like 12 times and the 6/28/06 software messed me up i dont know what to do when i turn on my ipod its like i barley got it from the store when i hook it up and change it when i take it off it does that what should i do i need some help please someone i cant do this anymore anything out there

    Try doing a Ctrl-Alt-Del, and in Task Manager click on the Processes tab. End the iTunesHelper and iPodService processes. Then reconnect the iPod and go into Disk Management, and the iPod should show up. Change the drive letter to something other than C, then eject the iPod and restart the computer. When you reconnect it you should be able to get it recognized.

  • Problem when change bank clearing account for payment posting.

    We recently changed the bank clearing account for payment posting (program PC00_M99_PPM). But I found out because the config can only be changed but not delimited on payroll side, the program errored out when it retro back for an employee to the old clearing account.  So what am I supposed to do to fix this problem?
    Have anyone ever handled this problem before and could please throw some light on it?
    Thanks in advance.
    Johnson

    hi
    check following
    1. Check in OMWD, whether Valuation grouping code "0001" ia ssigned to Ur plant
    2. OBYC - If you have assigned GR/IR Clearing A/c to WRX then check whether you have maintained it with combination of valuation class and GL A/c
    If yes then maintain only GL A/c w/o valuation class OR maintain one entry with valuation class empty and GL A/c
    check following
    Error in service entry sheet
    Re: Error in ML81N
    http://sap.ittoolbox.com/groups/technical-functional/sap-acct/grir-clearing-account-wrx-doesnt-recover-gl-account-2224137?cv=expanded
    http://sap.ittoolbox.com/groups/technical-functional/sap-log-ps/problem-while-posting-service-entrysheet-in-ecc-60-version-1483547?cv=expanded#
    regards
    kunal

  • Change the issue quantity for different plants

    We are facing a problem in the following issue.
    A material is being used in two plants. The material is procured from vendors in packets. The pack quantity varies for each plant for the same material since it is procured from different vendor. The base unit of measure for the material in the material master is maintained as NOS and the unit of issue is PAC. The alternative unit of measure in the material master can be maintained for only one PAC. If the pack quantity varies for different plant, how to maintain in the material master.
    For example : -
    Plant I u2013 Vendor A u2013 Pack quantity u2013 200nos.
    Plant II u2013 Vendor B u2013 Pack quantity u2013 300 nos.
    While creating reservation in plant II for one pack, the stock keeping quantity is 200 nos. On issue the issue quantity is 200 nos, but our requirement is the system should issue 300 nos. Kindly give solution to the problem.

    Hy afzal,
    I don't think it is possible to maintain different Conversion factor for 2 different plant for a single material.
    Acording to me there is 3 way to comeout of this problem.
    1) Create different Material codes for both plants.
    2) Insted of using alternate unit of measure use Batch specific unit of measure.But for this Materials are Batch Managed.
    [Batch Specific Unit of measure|http://help.sap.com/bestpractices/BBLibrary/Documentation/Q24_BB_ConfigGuide_EN_US.doc]
    3) Try to convince one of the vendor to change its packing qty/Packet.
    Regards,
    Dhaval
    Edited by: Dhaval Choksi on Jul 31, 2008 11:25 AM
    Edited by: Dhaval Choksi on Jul 31, 2008 1:26 PM

  • CS5 Device Central Stage.width/Stage.height update problem when change the device profile.

    When creating FL 3.0/3.1 app   and testing it at the CS5 Device Central if you change the profile of the active device(select different phone with different screen size) Stage.width/Stage.height could't change. Always stays the same as the first device's Stage.width and height. Even if you add addListener with Delegate nothing happends. Also it effects to Screen Oriantation. It looks like a problem or is this a bug?

    Having the same problem, though I can't get it to connect even once. I just started researching the problem tonight - no solution yet...
    I'm on Windows 7 Pro 64-bit, Production Premium CS 5.5.
    I've got no other internet issues, Adobe update works fine.
    Please - Anybody have an idea how to troubleshoot this problem?
    Thank you.

  • Problem when saving the Data basis for the Consolidation

    Hi Gurus,
    I am having 2 problems.
    1) When i try to execute the UCWB transaction . It gives an information message
    " Data basis DB needs to be generated (after upgrade) . I am following the procedure given in that "<b>Run maintenance of data basis DB in display mode. Go to the "Data Streams" tab page. Choose the "Generate" button.
    If changes to Customizing settings are permitted in the current system or client, as an alternative you can maintain the data basis in change mode and save. In the case of systems supplied with Customizing transports, as an alternative you can generate the data basis in the source system and then transport it again.</b>
    Even after doing that procedure when i again execute the UCWB. it give me the same message.
    2) when is try to save data basis for the consolidation . it give me this error message.
    "Field 0HC_ATCCODE: This compound differs from that of basic field 0HC_MEDCTG"
    I have checked the referenced Info objects . Checked the compound info objects. Activated them again. They dont differ in any way. but still i get this problem.
    Please help me out. If someone has come across this error and solved. Please help me.
    Regards
    satish

    Hi satish,
    I constantly receive the message like your #2 saying that it was a critical change in X infoobject. It's just a warning and I found several OSS notes saying that this message is not correct. Just ignore it.
    In case of your Q #1. The data basis might be generated in two ways: by pressing Save icon and by clicking the Generate icon (the system refers just to this very option) and then - Save. The last way is used in Productive environment. Try it.
    Hope this helps.

  • A problem when installing the RFSA/RFSG for PXIe-5644R

    When I intall the software "NI-RFSA/RFSG for PXIe-5644R",there is always a problem,that says——
    NI-RFSA Instrument Driver Support
    This installer could not detect a supported version of NI-RFSA. To develop and run applications for the NI 5644R using the NI-RFSA instrument driver, exit this installer and install NI-RFSA 2.5.2. Then, re-run this installer.
    but I surely have installed the NI-RFSA 2.5.2 before. This problem bothering me for a long time.I really want to know how to solve it.Thanks.
    Attachments:
    The problem.png ‏114 KB

    Greetings,
    I am sorry for the trouble you're having installing this software. Can you post a copy of your installation log? I can take a look at it and hopefully get to the bottom of this.
    It should be located here:
    C:\programdata\national instruments\installation logs
    Thanks,
    James D
    Product Support Engineer
    National Instruments

  • How can I get order quantity for a contract

    Hi
    I can see ordered quantity on a contract screen (VA42/VA43) but would you please tell me in which table or tables this is stored or how I can get ordered quantities against a contract
    Regards
    Javed

    Dear Javed Ihsan      
    You cann't see the order quantity for contract, you can only see the target quantity for the contract.
    However you can even see the order quantity for contract but it will not have any value -(VBAP-KWMENG).
    You can only seethe target quantity for a contract-(VBAP-ZMENG).
    For the release order you have order quantity( VBAP-KWMENG)
    PLease check and revert
    Thanks&Regards
    Raghu.k

  • Update weight and volume when changing the quantity

    Hello ALL,
    For some configurable items, those whose weight and volume depends on configuration, when changing the quantity at set level, weights and volumes are not calculated again and order item is saved with wrong data about weights and volume.
    when ever changing the quantity we will get a message - " Changing date/quantity may result in different BOM Please configure"
    if we do explicitly by clicking "Item Details Configuration' then Weight and Volume will get update automatically.
    my requirement is Weight and volume should get update automatically when changing the quantity with clicking on "Item Details Configuration'.
    could you provide any OSS notes available for this or any help to achieve this functionality.

    Dear Prathap Naidu P,
    Did you solve this issue?
    Because I have the same problem, and I was looking for hints.
    Thank you so much for any help.
    Best regards,
    J.Flanders

  • How do i change the email address for my icloud account on my 4s. when i sign in on line it is my new email address so i thought it would change automatically but obviously not!

    how do i change the email address for my icloud account on my 4s. when i sign in on line it is my new email address so i thought it would change automatically but obviously not!

    Settings>iCloud...scroll down...delete account. Then setup iCloud with your new ID.
    You can't change the Apple ID for your iCloud account, you have to delete it.

  • How do you change the pink highlight for the present day in calendar when in week view

    How do you change the pink highlight for the present day in calendar when in week view - OSX Maverick

    the current day was light blue in ical in 10.6 but with plenty of contrast, but I recently made the bigger leap all the way to calendar in 10.9. the choice of color is terrible for reasons such as Spile1962 puts below, but also not having any way to tweak it is terrible. I'm on a bran d new imac and can barely see a difference and frankly, while I appreciate the subtlety, I still forget to look for the darker bar across the top of the current week and day. we should be able to adjust weekend and current day bg colors.
    I went into the app's package contents in hopes that they were using a tiff/png file that I could tweak on my own but couldn't find anything for them. all the icons are there, as are the bg sets for all the little pop-ups and things, but I couldn't even find a reference to a hex color in the plist file.
    send apple feedback. I just did myself, except that Calendar hasn't made the list (yet?), only iCal up to version 4.x, and Messages is still only iChat for feedback, and some others are old as well. apparently after steve died, apple's attention to these details just died with him. it's been that long since those other apps should have been relevant on their site.

  • I have problem when updating the latest version of Pro-X, I tried for several times, so I uninstall and re-install it. It is unsuccessful to re-install the Pro-X and it direct me to ask help from CS,also showing this message: Exit Code: 6  Please see spec

    I have problem when updating the latest version of Pro-X, I tried for several times, so I uninstall and re-install it. It is unsuccessful to re-install the Pro-X and it direct me to ask help from CS,also showing this message: Exit Code: 6  Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW025, DW050 ... WARNING: DW024, DW025 ..., please advice me the step to re-install the Pro-X. Thanks

    Please follow Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5
    Do let us know if it worked.
    Regards
    Rajshree

  • When is the next update for iphone carrier setting?I cant change my carrier to 2g!!!There is only 3g or LTE available for me.

    when is the next update for iphone carrier setting?I cant change my carrier to 2g!!!There is only 3g or LTE available for me.

    Carrier Settings are dependent entirely on your carrier.  2G is old outdated and slow etc, most carriers are phasing out their 2G service. You would need to ask your carrier when they plan on releasing a new update.
    Why on earth do you want to set your iPhone to 2G?  It will automatically switch to 2G if 3G is not available, and 2G is found.

  • How do I change the default text for when I open up pages?

    How do I change the default text for when I open up pages?

    Colin,
    You may substitute any text you like for the "Placeholder Text", as it is called, in Pages. Click on the existing placeholder text and type something more to your liking. Do this in as many places as your particular template of interest demands. Then, Format > Advanced > Define as Placeholder Text. Lastly, File > Save as Template.
    Now that you have defined a Custom Template to your liking, you can go to Pages Preferences and under the General tab's first section, define the new custom template as your default for each new document.
    Regards,
    Jerry

  • I have to send large files like 5MB or biger via mobile phone, but in that cases phone is telling mi to plug in power. And when I do that, there is no problem to send the file. For smaller files there is no problem. How can I solve the problem? Because wh

    I have to send large files like 5MB or biger via mobile phone, but in that cases phone is telling mi to plug in power. And when I do that, there is no problem to send the file. For smaller files there is no problem. How can I solve the problem? Because when I'm not at home I can't plug in the power.

    hi,
    I am sending file from server to client i.e client will request for a file and service will send it back....... no socket connection is there...I am using JBOSS and apache axis.
    pls help me out.....
    Rashi

Maybe you are looking for