Problem when computer starts

when i start my computer , i see an error message ie "cannot find script file " and it gives the location of the file which is C/users/hanumanji/appdata/ roaming/adobe32/invis.vbs

Yes, that suspected malware (invis.vbs) is already gone from your computer; that's why you get that error during startup.
There are several ways programs can be called during the startup.  If you don't know which method is used to call that file, use a program like CCleaner to delete startup items.  There are a number of other programs that can do the same.

Similar Messages

  • Hello i have a problem when i start woorksheet, my computer crash with blue screen sometimes.

    hello i have a problem when i start woorksheet, my computer crash with blue screen.
    OS: Win 2000 pack 2 and dasylab 7.00.05 ;ddi7.02 ;nidaq 7.0
    I hve this problem sometimes and need to reebot my computer.This worksheet is used to generate 4 signals to output and have an acquisition tooin this 4 channels.
    The error is in the blue screen:0x00000076 (0x00000000 , 0x81358300, 0x000001c2, 0x00000000).
    Thanks for your help.

    The DASYLab development team has read your message, and advises that there is insufficient information to be able to even start diagnosing the problem. We suggest that you send a note directly to [email protected], with your full contact information, DASYLab serial number, and the following technical information:
    -The Help-->Report information - this will tell us more about the computer, video and installed memory
    -Installed hardware - what DAQ devices are you using (exact models!)
    -The worksheet that crashes - we need to see how the timing is configured in the worksheet
    -What other programs are running at the same time?
    -Does the worksheet crash every time?
    -Does the NI-DAQ Test Panel work correctly for both inputs and outputs?
    Sorry that we cannot be more help in this forum; we do not have much experience with blue screen under Windows 2000. This is very hard to do, and is almost always related to a hardware problem - either a resource conflict, or problems with one of the installed hardware devices (DAQ, Video, Memory...).
    Regards,
    -cj
    - cj
    Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

  • Dear Mr./Mrs.,  I had an iPhone 4 , then I bought iPhone 5s , I faced a problem when I started installing any new application other than I already had on my iCloud , I was asked to enter my password of my apple account and I entered it correctly , then I

    Dear Mr./Mrs.,
    I had an iPhone 4 , then I bought iPhone 5s , I faced a problem when I started installing any new application other than I already had on my iCloud , I was asked to enter my password of my apple account and I entered it correctly , then I was asked to answer two questions , but I forgot the answers !! I click on forgot the answers , they send me check your email , I check my email and they send me the password that I have already entered not the answers of the questions ! How can this problem be solved ?! Hope to take my message into consideration.
    Yours sincerely,
                             Hesham.

    Welcome to the user to User Technical Support Forum provided by Apple.
    For your issue...
    See Here > Apple ID: Contacting Apple for help with Apple ID account security
              Ask to speak with the Account Security Team...
         Or Email Here  >  Apple  Support  iTunes Store  Contact

  • I have a problem, when i start the project i open the browser window and whenh i select a clip premiere stops working!!!

    i have a problem, when i start the project i open the browser window and whenh i select a clip premiere stops working!!!

    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

  • Battery problem when computer sleeps

    Hi, I have Lenovo S12 , for about six months.
    I use the battery which came with the computer.
    It worked well till this problem : when the computer goes to sleep, even if the battery is full, it hibernates after really short time.
    When I turn it on, it says that Windows didn't shut down properly due to low battery, but when it starts, it shows that the battery is full, and it behaves normally, I really can use it for about 3 hours.
    Please help, what can I do??

    Have you got anything still running e.g. wifi, email fetching, location services etc ? There are tips on this page for maximising battery life between charges : http://www.apple.com/batteries/ipad.html

  • Can Lion be set so iCal will open and display calendar when computer starts

    I have Lion and the new iCal on a MacBook Air purchased a few weeks ago.  I set iCal as one of the applications that opens when I login in the Users & Groups in System Preferences.  So iCal opens when I start the computer (automatic login to the single user I have set up) but it doesn't open the calendar page.  I would like to have the calendar page open up when I start up the computer without having a lot of other applications and windows open as well.
    Any suggestions?  Thanks

    Rysz - thanks that was the problem - I missed that Hide was checked. 
    Rick

  • Rattling sound when computer starts

    Hi, I've been using HP 430 notebook and currently have Windows 8.1 pro (32 bit) installed. Recently I am having an issue and it concerns me a lot. When it starts up it makes a rattling sound for a couple of seconds and then its all gone. After start up everything is fine again. It doesn't happen evey time though. I've been using my pc for about 3 years and never needed any servicing or anything of that sort. Should I be worried (if not already!)? What might cause this and what needs to be done now? 

    Bappi wrote:
    Hi, I've been using HP 430 notebook and currently have Windows 8.1 pro (32 bit) installed. Recently I am having an issue and it concerns me a lot. When it starts up it makes a rattling sound for a couple of seconds and then its all gone. After start up everything is fine again. It doesn't happen evey time though. I've been using my pc for about 3 years and never needed any servicing or anything of that sort. Should I be worried (if not already!)? What might cause this and what needs to be done now? 
    No one is going to know this problem like that on here. You need to take it to a shop and have them see if first hand to know what might be the cause.
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • Diskdrive buzzes when computer starts

    When I start up my macbook, the disk drive makes an awful rattling/buzzing sound as if it is trying to start up a disk. ( Which I do not believe exists in the drive)

    Bappi wrote:
    Hi, I've been using HP 430 notebook and currently have Windows 8.1 pro (32 bit) installed. Recently I am having an issue and it concerns me a lot. When it starts up it makes a rattling sound for a couple of seconds and then its all gone. After start up everything is fine again. It doesn't happen evey time though. I've been using my pc for about 3 years and never needed any servicing or anything of that sort. Should I be worried (if not already!)? What might cause this and what needs to be done now? 
    No one is going to know this problem like that on here. You need to take it to a shop and have them see if first hand to know what might be the cause.
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • I have a problem when i started de download it says that you have a mistake to load this content

    Somebody help me when I started to download a movie it says that you have a mistake to download this content

    Same problem, to be honest  i am trying now to restore configuration. Let us see

  • OSX Mavericks Wifi connection problem when system starts

    My macbook pro unable to connect to the preset wifi when system started, same whether starts and ready from sleep-mode, or previous shutdown mode.
    This starts to happen just several weeks recently.
    However, after restart the entire OSx, the connection (auto detect and connect) would be back to normal.
    What's wrong? and any idea to solve this problem? Restart the OS takes very long time, and I don't like to waste time everytime open the laptop.
    Please help. Thanks.

    Troubleshooting Wi-Fi issues in OS X
    Wireless Connection Problems - Fix
    Wireless Connection Problems - Fix (2)
    Wireless Connection Problems - Fix (3)
    Wireless Connection Problems - Fix (4)
    Wireless Diagnostics - About
    Also try turning off Bluetooth

  • Problem when I start up my computer since installing Lion

    I have just installed Lion. Now whenever I open my Macbook Word, Adobe, Mail, etc all open up.
    How can I stop this happening?
    Thanks

    Welcome to the iOS world of nonthinking, wherein the OS decides everything for you, whether or not that's what you want. Salient details described in http://www.apple.com/macosx/whats-new/features.html#resume 
    See these for steps to resolve: http://hints.macworld.com/article.php?story=20110918051930924 and http://osxdaily.com/2011/08/01/turn-off-resume-per-app-in-mac-os-x-lion/

  • How does one get huey pro to start up when computer starts in morning

    Huey Pro is a sensor that measures and monitors the light in the room so that colors are rendered as acccurately as possible.  Once I calibrated the screen and device, it should fire up when I restart the computer but it dos not.  the icon in the system folder when clicked, says that the system preference folder needs to restart, the it will fire up. 
    So How does one get this to start early.
    Robert

    Hi Robert
    I am not sure that you can make the Huey Pro work correctly.Worked fine on windows but it was the one programme for me that I have never had success with on the Mac.
    I have checked the Huey web site for info but the support seems to have stopped.
    So the only way I can do it is to wait until the Icon is in the top right section of the screen,note that a white cross is in it and then click on the Icon in the dock open up the programme until the Start bit occurs then just click the close button.That fixes it for me.
    Rob

  • Problems when I start the Dreamweaver CS6 on Win xp

         Hello guys.
         I instaled a trial version of Dreamweaver CS6 in my PC, and when I will start the software, starts a task, but after they close automaticaly.
         I really don't know what to do, and this are bring me problems, and I want to know if is a error on my PC or on the software, and how can I resolve it.
         Properties:
         Windows XP. 32 bits. AMD.
          Any more imformation, tell me a message.
         Thank you.

    We cannot know. Check your Windows Event Viewer.
    Mylenium

  • Problem when I starting Weblogic Server Under Eclipse Suddenly Stop

    Hi everyone:
    I've a problem, I'm working with IDE Eclipse 3.2 and weblogic server 8.1 I need to debug the application, when I'm trying to start the server and everything look fine and almost at the end suddenly the server stop with this message:
    Stopping Weblogic Server...
    Failed to connect to t3://localhost:7001: Destination unreachable; nested exception is:
         java.net.ConnectException: Connection refused; No available router to destination
    please I need Help.
    Thanks in advance

    i still haven't found a solution to the problem with the specific setup i originally mentioned (wls 9.0, eclipse 3.2 on solaris/sparc). even after upgrading to wls 9.2, the exact same bug occurs.
    in the end, i just gave up on the standalone eclipse 3.2 and started using workshop for weblogic 9.2 that comes bundled with the wls 9.2 installation; and the problem does not occur with that setup.
    wl workshop 9.2 is based on eclipse 3.1. so if you want to use regular eclipse with regular wls, then maybe eclipse 3.1 is the most stable version to use with wls. hth.

  • Always when computer starts  i do receive a message from itunes: unknown error occured (-42110)

    always when starting the computer and connect either 4S or ipad2 itunes starts with  anote saying
    unknown error occured (-42110)
    Does anyone know anything about it?
    System seemingly works well after clicking "OK" - however, it s irritating
    Thanks in advance
    Sandfoort

    See 'Remove "SC info" folder'
    in
    http://support.apple.com/kb/TS1389

Maybe you are looking for

  • How do I add a zoom function to a digital magazine (.swf file) in InDesign CS6?

    Hi, Im creating an interactive digital magazine for our company which will go on the iPad, but also online for computers. The iPad (.folio) has zoom functions, but on screen (.swf) the magazine is very static and peaple can't zoom and scroll (the zoo

  • Invalid subreport name Error code:-2147483086

    The setup used in this particular environment is to run reports via Crystal reports server 2008. We call the servers via the rassdk_java_dg_12_en and the setup works just fine BUT in one particular case. The report that fails have a main report with

  • ICloud Mail has been down (Mac, iOS, online) since last night. Anyone else?

    Mail has been down completely since last night. Not able to access from Air, iPhone, iPad, or via Safari. System Status reports no problems. Other iCloud tools (Calendar, Contacts) seem fine. Anyone else having this problem?

  • HTML DB 1.6: Production or Release Candidate?

    Hi, an Oracle consultant in Germany told me that 1.6 is not yet production. Is that right? We're currently considering to upgrade our customer's environment from 1.5 to 1.6. If 1.6 is still an RC, when will production be available? Thanks, Kai

  • Help!  New Nano won't connect to computer

    Hope someone can help! We bought a Nano yesterday, unfortunately haven't been able to load anything onto it as yet. The story so far: We have downloaded itunes and set up an account. When we plug in the device the message on the ipod screen rotates b