Problem when confirmation of opertion in CO11n

Dear All
When i try to do confirmation of individual operation via CO11n it pickup actual data from order & when i try to save it system give me error message "Saving not necessary, data was not changed" Message no. RU099 & when i enter system exit me out from CO11n. Pl anyone suggest what is problem.
Regards

Dear,
Please refer the OSS note 1379218 and 1325245 for Message RU099.
Regards,
R.Brahmankar

Similar Messages

Please read my problem when I configure Weblogic https

I want to use https protocol and SSL for my web application in Weblogic
I have a problem but I am not sure it's related to configuring Weblogic or not please if you can advice me
I use "openssl" to be my own Certificate Authority (CA)
I used this instructions for using openssl [http://www.g-loaded.eu/2005/11/10/be-your-own-ca/]
after configuring openssl I used these steps for creating my keystore
1. First I use this keytool for creating my private key and public key
keytool -genkeypair -keyalg rsa -keystore ali_keytool.jks -storepass ali120 -alias ali_alias
What is your first and last name?
[Unknown]: AliKhosravi
What is the name of your organizational unit?
[Unknown]: Boors
What is the name of your organization?
[Unknown]: software
What is the name of your City or Locality?
[Unknown]: Tehranali_keytool.jks
What is the name of your State or Province?
[Unknown]: Tehran_Province
What is the two-letter country code for this unit?
[Unknown]: IR
Is CN=AliKhosravi, OU=Boors, O=software, L=Tehran, ST=Tehran_Province, C=IR correct?
[no]: y
2. I create my CSR by this command
keytool -certreq -alias ali_alias -keystore ali_keytool.jks -storepass ali120 -file ali_keytool.csr
3. I sign the ali_keytool.csr by openssl . I do it like this :
openssl x509 -req -in ali_keytool.csr -CA certs/myca.crt -CAkey private/myca.key -out ali_keytool.crt -days 365 -CAcreateserial -CAserial my_ca.seq
4.Now my I have a signed certificate (ali_keytool.crt) and my CA certificate (myca.crt)
and I import CA certificate to my keystore
keytool -import -alias Openssl_ca -file myca.crt -keystore ali_keytool.jks -storepass ali120
5. I import the signed certificate into my keystore by alias of private key
keytool -import -alias ali_alias -file ali_keytool.crt -keystore ali_keytool.jks -storepass ali120
6. I import the CA certificate again into a new keystore for creating Trust
keytool -import -alias my_ca -file myca.crt -keystore ali_keytool_trust.jks -storepass ali120
All steps done without any errors
I used this address for help [http://www.startux.de/java/44-dealing-with-java-keystores]
Now I want to configure kestores ans ssl in Weblogic
7. I go to the Environment-->Servers-->AdminServer-->Keystore tab in wblogic
8. I set "Keystores=Custom Identity and Custom Trust", "Custom Identity Keystore = H:\trust\ali_keytool.jks" , "Custom Identity Keystore Type=jks" ,
"Custom Identity Keystore Passphrase:ali120"
"Confirm Custom Identity Keystore Passphrase=ali120"
"Custom Trust Keystore=H:\trust\ali_keytool_trust.jks" , "Custom Trust Keystore Type=jks" ,
"Custom Trust Keystore Passphrase=ali120" , "Confirm Custom Trust Keystore Passphrase=ali120"
9. Then I go to SSL tab and I set "Identity and Trust Locations=Keystores" , "Private Key Alias=ali_alias" ,"Private Key Passphrase=ali120",
"Confirm Private Key Passphrase=ali120"
10. I go to the General tab and select "SSL Listen Port Enabled"
11. I user Firefox as WebBrowser so I configure my Browser I select Tools-->Options-->ViewCertificates --> Authorities tab
and I import the server certificate here is "myca.crt the openssl certificate"
in Downloading Certificate window I select
"Trust this CA to identify web sites"
"Trust this CA to identify email users"
"Trust this CA to identify software developers"
12. I restart Weblogic
13. I try to loging in weblogic like this "https://127.0.0.1:7002/console"
The webBroser show me this warning:
This Connection is Untrusted
You have asked Firefox to connect
securely to 127.0.0.1:7002, but we can't confirm that your connection is secure.
Normally, when you try to connect securely,
sites will present trusted identification to prove that you are
going to the right place. However, this site's identity can't be verified.
What Should I Do?
If you usually connect to
this site without problems, this error could mean that someone is
trying to impersonate the site, and you shouldn't continue.
Technical Details
I Understand the Risks
I don't know why the WebBrowser show me this warning while I imported the Server Certificate
I don't know that my problem is in configuring WebLogic or FireFox WebBrowser or Keystore
If you know please advice me
Thanks

Moderator Action:
You already aked this question a couple of weeks earlier:
My problem when I enable SSL in Weblogic and I don't have a trusted CA cert
This is a user-to-user forum.
There is no obligation that anyone respond. They will answer if they choose to.
If there is a business need for a resolution, use your service contract privileges and open a support ticket with Oracle Support.
http://www.oracle.com/us/support/contact-068555.html
This duplicate forum post is locked.

Problem in confirming quantity in sales order

Hi,
Quantities are not confiming in sales order after releasing the QM LOT by transaction QA16. Here the stock is posted to unrestricted stock but the table QALS is not updated accordingly which causes the problem in confirming the quantity in sales order.
Is there any scope of reversal of the QM lot so that further the lot can be released by QA32 or QA11.
Further when a lot is releaded the status of the lot is updated as the usage decision has been made. Where this status is stored?
Regards
Indranil

Hi,
Have yoou give the document category for quotation as B. Please try ginvg the same and run.
Thanks
Shiva

Problem when creating Database (Database, OS and hardware Configuraiton included)

Problem when creating Database:
Below are the problems, which I faced during creation of database. I have mentioned both the problem separately. Plus the log file maintained by Oracle during installation. It might help in diagnosing the error. Plus a little conclusion with I turned up to.
There are two problems, when creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
Problem # 1:
When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
I searched following oracle help for this problem.
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Problem # 2:
When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
I searched following oracle help for this problem.
ORA-12571: TNS:packet writer failure
Cause: An error occurred during a data send.
Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Log File Showing Error :
Result code for launching of configuration tool is 0
Launched configuration tool Oracle Database Configuration Assistant
Command which is being spawned is C:\Program Files\Oracle\jre\1.1.7\bin/jrew.exe -Duser.dir=d:\oracle\ora81\assistants\dbca\jlib -classpath ";C:\Program Files\Oracle\jre\1.1.7\lib\rt.jar;C:\Program Files\Oracle\jre\1.1.7\lib\i18n.jar;d:\oracle\ora81\jlib\ewt-3_3_6.jar;d:\oracle\ora81\jlib\share-1_0_8.jar;d:\oracle\ora81\jlib\swingall-1_1_1.jar;d:\oracle\ora81\assistants\dbca\jlib\dbassist.jar;d:\oracle\ora81\assistants\jlib\jnls.jar;d:\oracle\ora81\assistants\jlib\acc.jar;d:\oracle\ora81\jlib\help-3_1_8.jar;d:\oracle\ora81\jlib\ice-4_06_6.jar;d:\oracle\ora81\jlib\netcfg.jar;" DBCreateWizard -progress_only -responseFile NO_VALUE -createtype seed -numusers NO_VALUE -apptype NO_VALUE -cartridges NO_VALUE -options NO_VALUE -demos NO_VALUE -seedloc d:\oracle\ora81\starterdb -sid ora8i -orabase d:\oracle -clususer NO_VALUE -cluspswd Protected value, not to be logged -nodeinfo NO_VALUE -gdbName ora8i
Invalid Exit Code. The following result code will be used for configuration tool: 1
Configuration tool Oracle Database Configuration Assistant failed
The datafiles will be copied from the CD to d:\oracle\oradata\ora8i. The Oracle Database Configuration Assistant will begin creating the database.
An Oracle database will be created for you. The database name will be ora8i. The system identifier for the database will be ora8i. The password for the INTERNAL account will be ******, the SYS account will be change_on_install and the SYSTEM account will be manager.
Log File of Installation:
The above code is a part of the log file, which is generated by Oracle installer at C:\Program Files\Oracle\Inventory\Log\..
I just pasted the part of code, highlighted is the code showing error with Oracle Database Configuration Assistant.
Software & Hardware Configuration are as follow:
Software:
Database
Oracle 8.1.7.0.0 (Oracle8i)
Operating System
Microsoft Windows 2000
5.00.2195
Service Pack 2
Hardware:
x86 Family 6 Model 8 stepping
10
AT/AT COMPITABLE
260,400 KB RAM

Dont't worry about that. Before you
create a table(or view), it is wise to
drop the table(or view) with the same name.
If the name doesn't exist, of course there
is an error message. See the following script:
-------------------begin-----------
drop table students cascade constraints;
create table students (
sid varchar2(5),
fname varchar2(20),
lname varchar2(20) not null,
minit char,
primary key (sid));
--------------end-----------------
Good day!
null

Link problem when converting MS Word to PDF with Acrobat Professional

Hello all,
I have the following problem:
When I have a MS Word document with links to other files inside and I convert it to PDF the links are converted from relative paths to absolute paths.
The problem is created by Acrobat as the links in the MS Word file are relative (I have checked this by moving the different docs to another directory and confirmed that the links still work after the move).
How can I make the paths in the PDF relative again? I know there is a plugin from Evermap (and I can confirm this works) but I do not want to use this plugin (=read: spend another $190 dollars) as the license for the Acrobat Professional is expensive enough . Is there a way I can convert the paths within Adobe Acrobat easily? Or better: can I adjust the settings in Acrobat to a new standard when all converted documents contain relative paths?
Backgroundinfo:
- Adobe Acrobat 8 Professional
- Windows XP (SP2)
- MS Word 2002
Thanks in advance!
Bart

Dear Steve,
I have tried what u suggested: I put all the documents (word + linked documents) into the same folder on the local-drive (C). Then I recreated the links in the word document to be sure they were matching. After that I converted the word document to an PDF and confirmed the links were still working in the PDF document.
Then the biggest challenge: copying the pdf and linked documents to another drive&directory. As you can guess: Unfortunately the links did not work anymore.
Any other suggestions?
If I use the Evermap-tool (30 day-trial) I can look at the links and this is how it is 'coded' in the pdf.
first link: ../../../../test/link_a.pdf
second link: ../../../../test/link_b.pdf
and yes this will work if you put the documents in the directory test in the root of the local-drive but not in a different subdirectory.
Anyone ideas?
Grtz,
Bart

Problem when creating Database with Database, OS and hardware Configuraiton

Problem when creating Database:
There are two problems, which I faced during creation of database. When creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
Problem # 1:
When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
I searched following oracle help for this problem.
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Problem # 2:
When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
I searched following oracle help for this problem.
ORA-12571: TNS:packet writer failure
Cause: An error occurred during a data send.
Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Software & Hardware Configuration are as follow:
Software:
Database
Oracle 8.1.7.0.0 (Oracle8i)
Operating System
Microsoft Windows 2000
5.00.2195
Service Pack 2
Hardware:
x86 Family 6 Model 8 stepping
10
AT/AT COMPITABLE
260,400 KB RAM

user563502 wrote:
I am working on Solaris 8. What is Alert_SID.log? where can I find it?
ThanksFor the responsible of the upgrade of Oracle database, not even know what Alert log is?
to be honest with you, this is not your work.

Problem when creating Database (Database, OS and hardware Configuraiton)

Problem when creating Database:
There are two problems, which I faced during creation of database. When creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
Problem # 1:
When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
I searched following oracle help for this problem.
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Problem # 2:
When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
I searched following oracle help for this problem.
ORA-12571: TNS:packet writer failure
Cause: An error occurred during a data send.
Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Software & Hardware Configuration are as follow:
Software:
Database
Oracle 8.1.7.0.0 (Oracle8i)
Operating System
Microsoft Windows 2000
5.00.2195
Service Pack 2
Hardware:
x86 Family 6 Model 8 stepping
10
AT/AT COMPITABLE
260,400 KB RAM

user563502 wrote:
I am working on Solaris 8. What is Alert_SID.log? where can I find it?
ThanksFor the responsible of the upgrade of Oracle database, not even know what Alert log is?
to be honest with you, this is not your work.

Entry in CO1P when confirmed through BAPI

Hi All,
We have an interface where we are doing the confirmation of the production orders. We are using the BAPI 'BAPI_PRODORDCONF_CREATE_HDR' to confirm the production orders. And our configuration parameters have been maintained such that the automatic goods receipt of the production order happens on confirmation.
However the problem we are facing is, on confirmation of the production order - most of the times an entry is created in transaction CO1P with the message as 'Automatic Goods Receipt'.
Could any one please let us know why an entry is created in CO1P at the time of confirmation?
When we do the confirmation of the same production orders online using CO15, no entry is created in CO1P.
We are not able to figure out why an entry is created in CO1P only at the time of running the interface i.e. confirmation from BAPI.
Please let us know your inputs. Your help is much appreciated.
Thanks,
Manohar Dubbaka.

Hi Andreas,
As mentioned in SAP consulting note 20847
Since I had the problem after confirmation and before TECO, I called the report program in CORUPROC whenever I have an entry in CO1P. I check if an entry is existing in CO1P by looking up in the table AFFW with the production order number.
If an entry is found ONLY then I am calling the report program CORUPROC. After this report I am doing the TECO of the production order.
This appears to have solved the program for now! I am updating the status of the thread to closed,
Thanks for your suggestion.
Thanks,
Manohar Dubbaka.

FK08 when confirming foreign vendors the update is terminated

Hi,
IBAN is a sensitive field in the configuration. When confirming dutch vendors in transaction FK08 there are no problems with the update. However when we confirm GB, DE or other foreign customers, the update in FK08 is terminated. Bank key data and IBAN numbers are correct, the system even generates the correct IBAN while creating the bank data. However the confirmation in FK08 is terninated. Any hints?

Hi,
Error information is indeed in SBWP:
Update afgebroken (= terninated)
Systeem-ID.... WRT
Mandant......   100
Gebruiker....   WEIJE15
Transactie...   FK08
Update key...   4B23B98DD25318B4E10000000A0A1017
Gegenereerd..   15.12.2009, 10:06:35
Uitgevoerd...   15.12.2009, 10:06:35
Fouteninfo...   FC 080: SYS: routine APAR_IBAN_SET_VALIDITY_CORRECT

I deal with a itunes update problem when i try to update i get coneection has timed out error! i had the same problem when i had vista.. yesterday i formated my pc but i still have the same prommblem. i dont deal with such problems on direct downloads.

i deal with a itunes update problem when i try to update i get coneection has timed out error! i had the same problem when i had vista.. yesterday i formated my pc but i still have the same prommblem. i dont deal with such problems on direct downloads.i have this problem only with tunes. maybe my conection freezes for a sec idk

Sorry I gave this a 'this helped me' but after a long struggle I found some ticked box somewhere from some unauthorised chrome extension blaaa....... the link you gave was great, not only did it confirm all the bad things google is supposed to be up to it provided a better browser. Cheers man.
Anyone who find this; I disabled all extension in chrome. I then searched the word proxy in the settings section. A button came up, "change proxy settings" I clicked on it. Earlier it was greyed out as an extension was interefering.. It brought up a box with my own settings from my computer. Then I clicked LAN settings, then unchecked the 'Use a proxy server' button.
P.S. If you're using chrome, bail, and dowload Komodo Dragon. It's virtually identical, but you're not tracked, and you can use chrome extensions, and you can quickily transfer your chrome preferences into it.

I have an Epson printer on a Wifi network. Windows 7 desktop and and HP Win 7 laptop (my wifes) print to it just fine. My MacBook Pro running Yosemite won't detect it, and I have the latest driver installed. No problem when I had a Canon...

I have an Epson printer on a Wifi network. Windows 7 desktop is running the network, and my wife's HP Win 7 laptop prints to it just fine. My MacBook Pro running Yosemite won't detect it, and I do have the latest driver installed. I didn't have a problem when I had a Canon Pixma on the network, but when I replaced it with the Epson nothing seems to work. I go to add a printer to the queue and only the FAX function of the printer shows up - not the WS-4530 print function. Does anyone out there have any suggestions? Please??? :-)

Hi Kelly,
As someone who has to print from my Mac to a networked printer at home all the time, I can certainly understand how frustrating it must be to have that fail to perform as expected. Let's see if we can get you up and running.
I would suggest that you troubleshoot using the steps in this article -
OS X Yosemite: Printing troubleshooting
Start with the section titled Check the network.
Thanks for using Apple Support Communities.
Sincerely,
Brett L

How do I stop Firefox from creating untitled web pages when I try to send email from a web page. The only way I have found is to turn the computor off and then reboot. I don't have this problem when using Internet Explorer

Every time I click on a web site that has an email option the browser starts making untitled web pages and never stops unless I turn the computer off. It is very frustrating to not be able to use an email option when offered by a web site. The only way I can send email messages on the Firefox browser is to go into my hotmail acct. and copy and paste the addresses. I don't have this problem when I use the Internet Explorer browser.

See [[Firefox keeps opening many tabs or windows]]

Firefox gets problems when 2,7 GB of memory is used by Firefox

Firefox gets problems when 2,7 GB of memory is used by Firefox. Or more. Like 2,8 GB.
It started when I read jpost.com with tens of tabs open. I don't remember how many. But I know there was more than 40.
On the tab I that I was reading, the page turned completely black. Pitch black with nothing else, not even the Firefox interface. It was actually a pitch black shape that looked like a web page in shape. The blackness quickly disappeared and the page was normally readable again. But then it happened again - the page turned black again.
The same page turns black happened again later.
One of my browsing sessions had Firefox slow down so much that you could see scrolling happening when I used scrolling.
Still another time I had 60 tabs open and Firefox worked completely fine without freezes, slowdowns, or black shapes. I could close Firefox by just pressing the red X in the title bar.
Yesterday, I had 50 tabs open and I experienced a slowdown when I looked at the Breaking News headlines. The headlines would show slower than usual. The Breaking News headlines at jpost.com show the headlines a few words at a time until the headline is completely shown. Then the headline disappears and the next starts showing a few words at a time. And speed in general was not what you normally have with a computer that has 8 GB of memory. And a Core i5 processor. I opened two more tabs from the Breaking News section I had opened. After I opened a new window, Firefox froze. I had to close Firefox from the Task Manager by pressing End process. I had used Firefox for 6 hours without ever closing any of the tabs I had opened.
In all of these cases, more than 40 tabs were open. In all of these cases, the slow down or freeze meant I had to use Task Manager and then press End process on the Processes tab. In all cases except the two I describe in the next paragraph, I never close any tabs after opening them. No problems have ever happened until Firefox started using 2,7 GB of memory. Until that point, everything is normal with no freezes or slowdowns.
At two times, I tried to reduce memory usage by closing tabs. However, in both cases this would make Firefox freeze. In one of these cases, Firefox would show something bizarre: there would be about 7 tabs, and one of the tabs would be partly shown. Also, Firefox would show the busy cursor. Firefox did not show how many tabs I actually had. The second time, I tried to close the tabs by clicking Close other tabs in the menu that you get when right-click a tab. The tabs would close fine, but I remember that I opened Gmail and then I did this: I clicked on the Promotions tab. Instead of seeing the tab with the Emails, Firefox showed a busy cursor and the title bar said not responding. Firefox froze.
The reason might be Adblock Plus memory usage. In Adblock Plus home page, developer Wladimir Palant writes in his blog about how Adblock Plus uses a lot of memory: https://adblockplus.org/blog/on-the-adblock-plus-memory-consumption .

One more bit of information: I have a Geforce 640 GT graphics card. My graphics card drivers are old- version 311.41. The newest version of the drivers is 340.52. Would a new graphics card driver solve the problem?

Problem when I execute program SCM in background

Hi experts,
    I am with problem when I execute a program (SCM) in background. I inserted a new field (estoque_seg(10)) and the process stopped at execute in background.When I call transaction and press F8, works but for this, I need jump the consistence IF sy-batch IS INITIAL....Dont has any bath imput, only functions. Any idea?
Follow below the code:
Estrutura para tabela ENTRADA
DATA: BEGIN OF st_entrada,
        matnr(40)            TYPE c,
        werks(20)            TYPE c,
        ponto_abas(10)       TYPE c,
        estoque_max(10)      TYPE c,
        cobertura(10)        TYPE c,
        estoque_seg(10)      TYPE c, " Erlon Lourenço 20/01/2011
      END OF st_entrada.
Estrutura para tabela de LOG
*TYPES: BEGIN OF st_saida,
       pernr(8)             TYPE c ,
       date(10)             TYPE c,
       er_contribuition(15) TYPE c,
       tax(15)              TYPE c,
       msg_erro(80)         TYPE c,
     END OF st_saida.
Tabela para obter descricao da mensagem
*DATA: ti_saida TYPE STANDARD TABLE OF st_saida WITH HEADER LINE
                                              INITIAL SIZE 0.
Tabela que recebera o arquivo texto
DATA: BEGIN OF ti_entrada OCCURS 0.
        INCLUDE STRUCTURE st_entrada.
DATA: END OF ti_entrada.
DATA: BEGIN OF it_matid OCCURS 0,
matnr TYPE /sapapo/matkey-matnr,
matid TYPE /sapapo/matkey-matid,
END OF it_matid.
DATA: BEGIN OF it_locid OCCURS 0,
locno TYPE /sapapo/loc-locno,
locid TYPE /sapapo/loc-locid,
END OF it_locid.
DATA: BEGIN OF it_matlotsz OCCURS 0,
target_dur TYPE /sapapo/matlotsz-target_dur,
END OF it_matlotsz.
DATA:        wa_matloc       LIKE /sapapo/matloc   OCCURS 0 WITH HEADER LINE,
             wa_matlsim      LIKE /sapapo/matlsim OCCURS 0 WITH HEADER LINE,
             wa_matlotsz     LIKE /sapapo/matlotsz OCCURS 0 WITH HEADER LINE.
Variáveis Globais
DATA: v_tabix   TYPE sy-tabix,
      v_vrsioid TYPE /sapapo/apo01-vrsioid,
      v_tam     TYPE i.
    Select-Options & Parameters
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_versao    TYPE /sapapo/apo01-vrsioex OBLIGATORY DEFAULT '000',
             p_abas AS CHECKBOX ,
             p_est   AS CHECKBOX ,
             p_cober AS CHECKBOX ,
             p_estsg AS CHECKBOX.   " ERLON LOURENCO - 20/01/2012 - Estoque Segurança
SELECTION-SCREEN END OF BLOCK b1.
    Start-of-Selection
START-OF-SELECTION.
PERFORM consiste.
PERFORM f_upload.
PERFORM f_processa_batch.
PERFORM f_saida_dados.
MESSAGE i000 WITH 'Processo encerrado com Sucesso'.
END-OF-SELECTION.
*&      Form F_UPLOAD
      text
--> p1        text
<-- p2        text
FORM f_upload .
DATA: lc_file TYPE string.
TYPES: BEGIN OF st_ent,
            cam(80),
         END OF st_ent.
DATA: ti_ent TYPE STANDARD TABLE OF st_ent WITH HEADER LINE
                                              INITIAL SIZE 0.
RANGES: r_file       FOR zget0001-field_content.
r_file[] = zbs_constantes=>obter( i_bukrs = space i_field = 'FILE' i_process = 'PONTO-REAB' ).
READ TABLE r_file INDEX 1.
lc_file = r_file-low.
CLEAR: ti_entrada,
         ti_entrada[],
         ti_ent,
         ti_ent[].
abrir arquivo para leitura
OPEN DATASET lc_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
    MESSAGE i000 WITH text-e01.
    STOP.
ENDIF.
Leitura de arquivos
DO.
    READ DATASET lc_file INTO ti_ent.
    IF sy-subrc <> 0.
      EXIT.
    ENDIF.
    APPEND ti_ent.
ENDDO.
Fechamento do arquivo
CLOSE DATASET lc_file.
LOOP AT ti_ent.
    SPLIT ti_ent AT ';' INTO ti_entrada-matnr ti_entrada-werks ti_entrada-ponto_abas ti_entrada-estoque_max ti_entrada-cobertura ti_entrada-estoque_seg.
    APPEND ti_entrada.
ENDLOOP.
ENDFORM.                    " F_UPLOAD
*&      Form F_PROCESSA_BATCH
      text
--> p1        text
<-- p2        text
FORM f_processa_batch .
LOOP AT ti_entrada.
    v_tabix = sy-tabix.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        input = ti_entrada-matnr
      IMPORTING
        output = ti_entrada-matnr.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        input = ti_entrada-ponto_abas
      IMPORTING
        output = ti_entrada-ponto_abas.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        input = ti_entrada-estoque_max
      IMPORTING
        output = ti_entrada-estoque_max.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        input = ti_entrada-cobertura
      IMPORTING
        output = ti_entrada-cobertura.
IA - ERLON LOURENCO - 20/01/2012
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        input = ti_entrada-estoque_seg
      IMPORTING
        output = ti_entrada-estoque_seg.
FA - ERLON LOURENCO - 20/01/2012
    MODIFY ti_entrada INDEX v_tabix.
ENDLOOP.
CLEAR: it_matid,
         it_matid[],
         it_locid,
         it_locid[],
         wa_matlsim,
         wa_matlsim[],
         wa_matloc,
         wa_matloc[].
SELECT matnr matid INTO TABLE it_matid FROM /sapapo/matkey
FOR ALL ENTRIES IN ti_entrada WHERE matnr = ti_entrada-matnr.
SELECT locno locid INTO TABLE it_locid FROM /sapapo/loc
FOR ALL ENTRIES IN ti_entrada WHERE locno = ti_entrada-werks.
IF p_versao = '000'.
    LOOP AT ti_entrada.
      READ TABLE it_matid WITH KEY matnr = ti_entrada-matnr.
      IF sy-subrc = 0 .
        READ TABLE it_locid WITH KEY locno = ti_entrada-werks.
        IF sy-subrc = 0.
          SELECT SINGLE * INTO wa_matloc FROM /sapapo/matloc WHERE matid = it_matid-matid AND
                                                                   locid = it_locid-locid.
          IF sy-subrc = 0.
            IF p_abas = 'X'.
              wa_matloc-reord    = ti_entrada-ponto_abas.
            ENDIF.
            IF p_est = 'X'.
              wa_matloc-maxstock = ti_entrada-estoque_max.
            ENDIF.
            " IA - Erlon Lourenço - 23/01/2012
            if p_estsg = 'X'.
              wa_matloc-safty    = ti_entrada-estoque_seg.     " Erlon Lourenço - 23/01/2012
            endif.
            "FA - Erlon Lourenço - 23/01/2012
            IF p_abas = 'X'   OR
               p_est   = 'X'   OR
               p_estsg = 'X'.      " Erlon Lourenço - 23/01/2012
              APPEND wa_matloc TO wa_matloc.
            ENDIF.
            SELECT SINGLE * INTO wa_matlotsz FROM /sapapo/matlotsz WHERE lszid = wa_matloc-lszid.
            IF sy-subrc = 0.
              IF p_cober = 'X'.
                wa_matlotsz-target_dur = ti_entrada-cobertura.
                APPEND wa_matlotsz TO wa_matlotsz.
              ENDIF.
            ENDIF.
          ENDIF.
        ENDIF.
      ENDIF.
    ENDLOOP.   " LOOP AT ti_entrada.
ELSE.
Verifica versáo para saber se preenche a tabela wa_matlsim
    SELECT SINGLE vrsioid INTO v_vrsioid FROM /sapapo/apo01 WHERE vrsioex = p_versao.
    IF sy-subrc = 0.
      SELECT * INTO TABLE wa_matlsim FROM /sapapo/matlsim WHERE simid = v_vrsioid.
      IF wa_matlsim[] IS NOT INITIAL.
        LOOP AT ti_entrada.
          READ TABLE it_matid WITH KEY matnr = ti_entrada-matnr.
          IF sy-subrc = 0 .
            READ TABLE it_locid WITH KEY locno = ti_entrada-werks.
            IF sy-subrc = 0.
              READ TABLE wa_matlsim WITH KEY matid = wa_matloc-matid
                                             locid = wa_matloc-locid.
              IF sy-subrc = 0.
                wa_matlsim-reord    = ti_entrada-ponto_abas.
                wa_matlsim-maxstock = ti_entrada-estoque_max.
                wa_matlsim-safty    = ti_entrada-estoque_seg.     " Erlon Lourenço - 23/01/2012
                MODIFY wa_matlsim INDEX v_tabix.
              ENDIF.
            ENDIF.
          ENDIF.
        ENDLOOP. " LOOP AT ti_entrada.
      ENDIF.     " IF wa_matlsim[] IS NOT INITIAL.
    ENDIF.     " IF sy-subrc = 0. 1º
ENDIF.     "IF p_versao = '000'
Funcáo que atualiza campos nas bases de dados.
CALL FUNCTION '/SAPAPO/DM_PRODUCTS_POST'
    EXPORTING
      iv_vb         = 'U'
    TABLES
      it_matloc     = wa_matloc
      it_matlsim    = wa_matlsim
      it_matlotsz   = wa_matlotsz
    EXCEPTIONS
      not_qualified = 1
      insert_failed = 2
      update_failed = 3
      OTHERS        = 4.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " F_PROCESSA_BATCH
FORM BDC_DYNPRO
*&      Form F_SAIDA_DADOS
      text
--> p1        text
<-- p2        text
FORM f_saida_dados .
IF ti_saida[] IS NOT INITIAL.
   DATA: lc_file TYPE string.
   lc_file = p_erros.
   CALL FUNCTION 'GUI_DOWNLOAD'
     EXPORTING
BIN_FILESIZE                    =
       filename                        = lc_file
FILETYPE                        = 'ASC'
     TABLES
       data_tab                        = ti_saida
FIELDNAMES                      =
    EXCEPTIONS
      file_write_error                = 1
      no_batch                        = 2
      gui_refuse_filetransfer         = 3
      invalid_type                    = 4
      no_authority                    = 5
      unknown_error                   = 6
      header_not_allowed              = 7
      separator_not_allowed           = 8
      filesize_not_allowed            = 9
      header_too_long                 = 10
      dp_error_create                 = 11
      dp_error_send                   = 12
      dp_error_write                  = 13
      unknown_dp_error                = 14
      access_denied                   = 15
      dp_out_of_memory                = 16
      disk_full                       = 17
      dp_timeout                      = 18
      file_not_found                  = 19
      dataprovider_exception          = 20
      control_flush_error             = 21
      OTHERS                          = 22
   IF sy-subrc <> 0.
     MESSAGE i005 WITH 'Error to unload file !'.
     STOP.
   ENDIF.
ENDIF.
ENDFORM.                    " F_SAIDA_DADOS
*&      Form CONSISTE
      text
--> p1        text
<-- p2        text
FORM consiste .
IF p_abas IS INITIAL AND
     p_est   IS INITIAL AND
     p_cober IS INITIAL AND
     p_estsg IS INITIAL.   " ERLON LOURENCO - 20/01/2012 - Estoque Segurança
    MESSAGE i000 WITH text-e03.
    STOP.
ENDIF.
IF sy-batch IS INITIAL.
    MESSAGE i000 WITH text-e02.
    STOP.
ENDIF.
Best regards,
Erlon Lourenço
Edited by: Erlon Louren on Jan 27, 2012 11:09 AM

Hi Raja,
            Check weather there are any enhancements to the datasource.If yes once check the code in CMOD.Seems there is some discrepency in that.
Regards
Karthik

Design problem when using Area Group Page -- BSP

We have installed MSS ERP2004 and are using the webdynpro based Area Group Page. From this page we have added links to diffrent BSP application (using BSP-iviews in the PCD).
The problem:
When we opens one of these links from the Area Group Page the BSP application is opening but the portal design is not inherited.
The strange thing is that if we refresh the iview the portal design is inherited.
Why did it not work when opened at first?
'Support portal integration' is ticked of in the BSP application.
'Supply Portal Stylesheet' is set to 'Yes' for the iview in the PCD.
We are running ERP2004/WAS6.40.
Anyone with the same experience?
Regards
Bjorn

We have installed MSS ERP2004 and are using the webdynpro based Area Group Page. From this page we have added links to diffrent BSP application (using BSP-iviews in the PCD).
The problem:
When we opens one of these links from the Area Group Page the BSP application is opening but the portal design is not inherited.
The strange thing is that if we refresh the iview the portal design is inherited.
Why did it not work when opened at first?
'Support portal integration' is ticked of in the BSP application.
'Supply Portal Stylesheet' is set to 'Yes' for the iview in the PCD.
We are running ERP2004/WAS6.40.
Anyone with the same experience?
Regards
Bjorn

Problem when confirmation of opertion in CO11n

Similar Messages

Maybe you are looking for