Problem when connect the portal through webserver

Hi All,
I have implemented the webserver (IIS6) with Iisproxy applicaiton for connecting to my portal server. So after finish configuration, i have try to browsing the portal through the webserver, and found that some page cannot display and showed the error "Bad Request (Invalid URL)". Then i test browing the portal again by browsing directly to the portal, and this error do not occur.
Do any body have the problem same me? please suggest the resolve solution.
Best Regards,
Pongsak J.

Hi Gregor,
The sample of pages are recent notification, hot news, contact person, etc., and i have used IisProxy version 1.6, portal 6.0 SP2 Patch3, and Web AS 620.
Regards,
Pongsak J.

Similar Messages

WSConfig problem when connecting to Portal with Netweaver Business client

Hello everybody,
I am trying to connect to an existing portal (7.0) with the new Netwevaer Business client. On one system, it works - on the other, it doesn't.
The client tries to call the url:
http://<host>:<j2ee-port>/NavigationWS/NavigationWSConfig?wsdl=binding&style=document
on one system (where it works), the response contains a wsdl xml:
<?xml version="1.0" encoding="UTF-8" ?>
- 
- <wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" name="NavigationWSWsd" targetNamespace="urn:NavigationWSWsd" xmlns:bns0="urn:NavigationWSWsd/NavigationWSConfig/document" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
<wsdl:import location="http://iwdfvm2160.wdf.sap.corp:51000/NavigationWS/NavigationWSConfig/bindings?wsdl&style=document" namespace="urn:NavigationWSWsd/NavigationWSConfig/document" />
- <wsdl:service name="NavigationWS">
- <wsdl:port name="NavigationWSConfigPort_Document" binding="bns0:NavigationWSConfigBinding">
<soap:address location="http://iwdfvm2160.wdf.sap.corp:51000/NavigationWS/NavigationWSConfig?style=document" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
on the other system (actually the one I need to work!) the server returns error 404 the ressource does not exist.
Now I think it may be a webservice configuration problem, but I have little experience in this area.
What is this URL to ../NavigationWS/NavigationWSConfig ? How can I activate it or check if it exists ? Where to look on the system ?
Can anyone help?
best regards,
Johannes
Message was edited by:
        Johannes Bacher
Message was edited by:
        Johannes Bacher

Hi Johannes,
We are facing the same question with our 7.0 Portal (SPS 13). It seems that the application "NavigationWS" does not exist, there is not even an application alias defined at the HTTP provider of the J2EE engine.
What Portal version are you using? Is there a difference to the Portal that has no problems with providing the wsdl?
Kind regards,
Florian Dworak
Message was edited by:
        Florian Dworak

Problem when connecting the Ipod

Hello,
I can open Itunes fine but if I connect an Ipod I get a message saying "cannot find disk". With the options retry, cancel and continue, and no matter which of the three I click it keeps reapearing so I cannot sync the ipod with itunes.
Please can you suggest something?
Thank you
Kiki

You will have to restore the iPOd with the latest iPod updater. http://www.apple.com/ipod/download/
Restoring will wipe the iPod clean of all songs/playlist ect ect but long as you have them all on your PC in iTUnes, this shouldn't be a issue more on restoring can be found here http://www.apple.com/ipod/download/

Problem when updating the notes through synchroniz...

I use to update my outlook 2003 notes regularly now it won’t updating. I re-install the pc suite once, as soon as I re-installed it worked but only one time.
My PC Suite version is 7.0.8.2
Mobile Phone N70 Music Edition.

Hi,
This error also comes if you donot mention Business Place and Section code during the transaction. Please check whether
you have defined business place and section code and assigned to your company code and also entered them during
transaction.
Regards,
Sadashivan

I bought a new MacBook Pro (Mac Os 10.8.4) when conecting my mobile broadband dongle (Huawei E122) the computer does not read it at all. I do not have problems when connecting it to my former computer (PC) and a Mac from last year. Any suggestions?

I bought a new MacBook Pro (Mac Os 10.8.4) when conecting my mobile broadband dongle (Huawei E122) the computer does not read it at all. I do not have problems when connecting it to my former computer (PC) and a Mac from last year. Any suggestions?

Thanks,
Yes, I did that. They have uppgrades for the dongles, but just untill Mac Os 10.7. Their solution is to buy a new modem from them or getting one for free if I sign a contract for 24 months! So, i think from that side not very helpful.
It is just that I do not want to buy a new modem, when it works in quite recent computers and after having spent money in the new Mac.
But thank you for your reply!

Hello, I have a problem when I connect to the computer ipad 2 in itunes and click on the "Programs", itunes crashes and writes simply an error. when connecting the iphone does not. everywhere is version 7.0. Itunes is also the latest version. thank you

Hello, I have a problem when I connect to the computer ipad 2 in itunes and click on the "Programs", itunes crashes and writes simply an error. when connecting the iphone does not. everywhere is version 7.0. Itunes is also the latest version. thank you

There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

Pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 via blutooth (firmware prob) to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all

pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all not even if i press skip track forward or back on the unit it doesn't function everything works except that. on listening to radio or anything else related not pairing thru Bluetooth unit works fine, seems there to be Bluetooth update that is not making iPhone and unit not compatible at all. does pioneer need fix this problem with update firmware or thru apple need help. my iPhone was working fine before with previous ios 5 before.

Dear Valued Pioneer Customer:
We would like to inform you of the availability of an optional Bluetooth® firmware update (HW05-SW01.27.20) that enables Bluetooth AVRCP control and metadata display from a compatible Pioneer CD or DVD Receiver when used with an iPhone® 5 or iOS 6 device. If you do not own an iPhone 5 or iOS 6 device, there is no need to install this update.
This firmware update may be used only with the following 2012 Pioneer products:
CD Receivers
DVD Receivers
DEH-P8400BH
DEH-P9400BH
DEH-80PRS
AVH-P2400BT
AVH-P3400BH
AVH-P4400BH
AVH-P8400BH
In order to perform this update, the following items are needed:
A Pioneer CD or DVD Receiver above with built-in Bluetooth
Laptop with built-in Bluetooth running Windows® 7
Bluetooth firmware update (HW05-SW01.27.20)
How to Obtain the Free Firmware Update
1. Download the INSTRUCTIONS for the optional Bluetooth firmware update (HW05_SW01.27.20).
2. Download the UPDATE FILE to a computer and transfer the file to a compatible 2012 Pioneer CD or DVD Receiver via a Bluetooth-enabled Windows 7 laptop.
You can also arrange for Pioneer to update your 2012 Pioneer CD or DVD Receiver by calling Pioneer Customer Service toll free at 800-421-1404 during regular business hours (M-F 10AM-7:30PM Eastern Time, except on holidays). If this firmware update is performed by Pioneer, there is a charge of $60.00 (this charge includes return shipping of the updated unit within the U.S.). Charges for removal/reinstallation of the unit and shipment to Pioneer are the customer’s responsibility.
How to Determine if the Firware Update has Already been Installed
CD Receivers:
• With the unit turned off (press and hold the source button until the CD Receiver turns off), press and hold the center of the volume knob to bring up the Settings menu → rotate the volume knob until "BT Version Info" is displayed and then press the center of the volume knob → The firmware version should show HW05-SW01.27.20.
DVD Receivers:
• With the unit turned off (press the home button and select ‘OFF’ from the source icons), press the home button → Press the “System” icon at the bottom of the screen → Select the “Bluetooth Version Info” option → The firmware version should show HW05-SW01.27.20.
If the Bluetooth firmware version shows HW05-SW01.27.20, no further action is necessary.
Questions
If you have any questions, please contact the Pioneer Customer Service Center toll free at 1-800-421-1404, Monday through Friday, 10:00 a.m. to 7:30 p.m. (Eastern Time), except on holidays.
Sincerely,
Pioneer Electronics (USA) Inc.

My iPhone 5 got problem when connect with lighting cable, this will keep pop up message "this accessory may not be supported"

My iPhone 5 got problem when connect with lighting cable, this will keep pop up message "this accessory may not be supported", I can't charge or sync at all. I tried plug and unplug many time, still can't detect/charge my iPhone5, but sometime will 'lucky' that can connect to my iTunes and charge battery…
This message will auto pop up also when I don't have plug anything in my iPhone 5, It is very annoying…
The lighting cable is original and now i'm using OS 7.0.4 / iTunes is 11.1.3
What I can do to fix this problem? Thank you.

I would try using another cable you can likely borrow one to test from somebody
if it's the same then likely the connector in your iphone have been damaged

How to avoid the split problem when uploading the data from csv file

Dear Friends,
              I have to upload data from the .csv file to my custom table , i have found a problem when uploading the data .
i am using the code as below , please suggest me what i have to do in this regard
      SPLIT wa_raw_csv AT ',' INTO
                wa_empdata_csv-status
                 wa_empdata_csv-userid
                 wa_empdata_csv-username
                 wa_empdata_csv-Title
                 wa_empdata_csv-department.
APPEND wa_empdata_csv TO itab.
in the flat file i can see for one of the record for the field Title as
Director, Finance - NAR............there by through my code the wa_empdata_csv-Title is getting splited data as "Director, and Department field is getting Finance - NAR" , i can see that even though " Director, Finance - NAR" is one word it is getting split .
.......which is the problem iam facing.Please could any body let me know how in this case i should handle in my code that this word
"Director,Finance - NAR"   wil not be split into two words.
Thanks & Records
Madhuri

Hi Madhuri,
Best way to avoid such problem is to use TAB delimited file instead of comma separated data. Generally TAB does not appear in data.
If you are generating the file, use tab instead of comma.
If you cannot modify the format of file and data length in file is fixed character, you will need to define the structure and then move data in fixed length structure.
Regards,
Mohaiyuddin

Error when connecting to portal from some machines

Hi all,
Can anyone help me with this.
I get this jserver error when connecting to portal from some
client machines.
I works fine from the others. Any ideas?
This is the error I get:
[08/01/2002 17:41:57:618 GMT+00:00] page/Timeout occurred,
label=73 url=http://odeceixe:81/pls/portal30/!
PORTAL30.wwpro_app_provider.execute_portlet time=15828ms
[08/01/2002 17:41:57:618 GMT+00:00] page/ContentFetcher
Unexpected Exception, name=content-fetcher5
java.io.EOFException: Premature EOF encountered
     at HTTPClient.StreamDemultiplexor.read
(StreamDemultiplexor.java, Compiled Code)
     at HTTPClient.RespInputStream.read(RespInputStream.java,
Compiled Code)
     at java.io.InputStream.read(InputStream.java:95)
     at java.io.InputStreamReader.fill
(InputStreamReader.java:163)
     at java.io.InputStreamReader.read
(InputStreamReader.java:239)
     at oracle.webdb.page.ContentFetcher.run
(ContentFetcher.java, Compiled Code)

Did you ever find the cause of this, I am receiving the same message, but as you said, only when connecting to the portal via a certain pc.

Error when redirecting the portal logoff page

Hello,
we have a problem in redirecting the portal logoff page.
Our production system is a cluster environment -windows 2003.
we have developed customizing page for portal logoff.
when the cluster is in Node A the functionality of the logoff page is working fine and it is redirecting to the customized page.
But when we shift it to Node B and logoff the portal it is not showing the customized page.
We have referred the following note also:696294.
We have added the portal logoff page is IIS services also.
But when we shift the server from NodeA-NodeB the functionality of the redirecting is not happening and it gives a message
you are not authorized.
I appreciate any one response.
Regards,
Krishna.

Hi sridhar,
Thanks for your reply.
What my error is "iam getting the logoff page redirected when the cluster resources are in Node1 but iam not getting the same logoff page when the cluster is nodeB"
Ie we have developed a customising logoff page and set the page.When the services are in Node A the fucntionality is working fine.But when the resources move to NodeB iam not getting the customized logoff page".It says no authentication.
Aprreciate your further help.
Regards,

Certain Users getting double logon screen when accessing the Portal

I have about 15 users out of 2500 that are getting the double logon screen when accessing the Portal. It's very intermittent, one minute it works fine the next minute it doesn't. I've tried almost everything on the client side, opened a case with Microsoft. Still no help.
Does anyone have any ideas on this?

The users are getting a login page with 2 login boxes. they can login, but it does not single sign them in.
Yes we are using SPNEGO, and it works for everyone except these users, and it does work sometimes for them
Yes it is possible these users are using NTLM becasue I see some events in the event viewer on the client indicating this
You find an event similar to the following event in the system event log:
Event Type: Warning
Event Source: LSASRV
Event Category: SPNEGO (Negotiator)
Event ID: 40961
Date: 10/27/2004
Time: 1:00:50 PM
User: N/A
Computer: COMPUTER
Description: The Security System could not establish a secured connection with the server ldap/DC01.corp.com/[email protected] No authentication protocol was available.
Edited by: Jeremy Rafuse on Dec 21, 2007 7:26 PM

When connect the Database from Toad , Sqlplus giving the error

when connect the Database from Toad , Sqlplus giving the error
recent changes 12.1.1 installatiojn
Oracle SQL plus encountered a problem and needs to close we are sorry for convenienvce
Oracle Forms Designner has encountered a probloem and needs to close we are sorry for the convenience
Thanks & Regards,
sree

when connect the Database from Toad , Sqlplus giving the error recent changes 12.1.1 installatiojnHave you tried using the same user via simple sqlplus on the database server or apps tier server itself? Please try the same database user/login on the database server using the sqlplus available on the server itself. See what message do you get. If the the login happens, then try with the tns entry e.g. sqlplus username/password@prod and see if that works on the db server. If both of these conditions work the check where is Toad picking up the tns entry from on the client pc/laptop. If first test fails, then check if the account is locked.
Hope this helps.

I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5. I am receiving an error problem when doing the following - I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive whe

Hi, I am having a little trouble with exporting images to another drive and Catalogue and need some help if anyone can give me some advice
I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5.
I am receiving an error problem when doing the following -
I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive where a Lightroom Catalogue has been created. In this Catalogue I have arranged for the images once exported to be moved to a different folder - I used the Auto Import process under the File dialogue box.
When processing the Export I receive an error message for each of the images being exported indicating the following -
Heading Import Results
Some import operations were not performed
Could not move a file to requested location. (1)
then a description of the image with file name
Box Save As Box OK
If I click the OK button to each image I can then go to the other Catalogue and all images are then transferred to the file as required.
To click the OK button each time is time consuming, possibly I have missed an action or maybe you can advise an alternative method to save the time in actioning this process.
Thanks if you can can help out.

Thank You, but this is a gong show. Why is something that is so important to us all so very, very difficult to do?

Does anyone Know how to fix error 0xe8000065 when connecting the ipod touch 4g

does anyone Know how to fix error 0xe8000065 when connecting the ipod touch 4g

See:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

Problem when connect the portal through webserver

Similar Messages

Maybe you are looking for