Problem when creating a transport request

Hello
I copied productive BR3 to test BR1 system(it is a BW3.5 system). Test BR1 existed also before(only the main client was 003).
Now main client is on both 001(I do not know if this matter). I replicated with transport controller and everything went fine.
When I want to create a transport request I have problem "Extended transport contrl is not active . Cannot specify target client". when I wannt further explanation I get:
"Extended transport control is not active: Cannot specify target client
Msg.nr.TR067
Diagnosis
Extended transport control is not active. This means that you can only release transport requests for the following transport targets:
Target group
R/3 System without specifying a client
Procedure
Change the transport target of the request by removing the client (for example, "C11" instead of "C11.010").
The simplest way of doing this is to use F4."
When I use F4 for "Target" field I get "BR3.001" as only option. If I choose BR3.001 I get above message. If I use "BR3" I get "BR3 is not a consolidation target". For further explanation I get :
"BR3 is not a consolidation target
Msg.nr TK658
Diagnosis
Transport target BW3 is not configured as a consolidation target of this SAP System. If you do not stick to configured transport routes, you may cause inconsistencies between the SAP Systems in the system landscape.
If you use extended transport control, you also need to specify a configured target client.
If the configured consolidation target is a target group, you also need to specify the target group as the transport target, if the target group consists of a single target system, or a single target client.
Procedure
Choose a configured transport target, or change the transport route configuration in the Transport Management System.
What to do?

Hi Jan,
Please check whether parameter CTC=1 has been set in Transport tool,If not set it.
Also check whether your transport group is configured properly
regards,
Jai

Similar Messages

Error when creating a transport request

I have developed a process with GP and now I want to export it by creating a transport request. When I choose my process in the gallery, I get the following messages:
Process "House Connection Request" refers to deprecated version of Callable Object "CO_InputRequest"; deprecated versions cannot be exported
Process "House Connection Request" refers to deprecated version of Action "Input House Connection Request"; deprecated versions cannot be exported
Both the action and its CO exist, but I don't understand why they are deprecated as they are activated and working.
So I deleted them from the process and created them new, but I still get the same error message from above.
Any help is greatly appreciated.
Regards,
Aydin

Hi Experts,
we are currently facing the same issue, that some Guided Procedures processes can not be added to transports, always throwing the same error messages:
Process "xxx" refers to depricated version of Callable Object "zzz"; deprecated versions cannot be exported
Can someone tell us if this is a technical issue or has object xxx been created/modified in the wrong way?
Any help is greatly appreciated.
Thank you very much.
Kind regards,
Jan

[ICSS B2B] Problem when creating a service request due to language

Hi everyone.
We have a web portal based on icss_b2b wich is linked with our backend (CRM).
On the web portal, we should be able to create service requests and it works fine when we are using english.
But if we log using german language, when we try to create a service request we have an error and creation ins't done.
Do we need do to do any configuration in the xcm ? Crm ? to allow to create service request in a new language ?
Thanks for your help.

Hi,
We are facing the same problem, were you able to solve this?
Our Portal takes the language from the browser but we only want to allow people access to ICSS in French and English.
Example:
If browser language = French --> French ICSS
If browser language = English --> English ICSS
If browser language = Dutch --> English ICSS (English = default language)
Many thanks for any feedback.
Cheers,
Geert

Problem while creating the Transport Request in BI Development.

Dear Friends,
We are trying to transport the objects from BW Development System to BW Production system. We are using the Path RSA1-> Modeling -> Transport Connection.
In Transport Connection i selected grouping "Only necessary objects" and later i selected the ODS object into right side panel (Transport Area), by default it showed as $TMP package, to change the Package into our own package we clicked on Package pushutton. It popup a screen "Select Objects for Changing Package" here we selected all and clicked on OK button and it asked for the new Package name where we specified our own package name (ZBIW) and clicked on save button and it got save after changing the package name we selected all the objects and clicked on the Transport pushbutton but it did not asked for a request id and we got the following message.
Error/Info Message:
Edit objects separately since they belong to different original systems.
Choose 'Display object' or 'Cancel'.
Please give us your valuable input for our issues.
Thanks in Advance.
Regards,
Akash.

Hi,
find the Objects for which the system is creating this error from the error messages.
And then search for those objecs in the collected objects ,in right hand side screeb of Transport connector. you can find them two times ticked.And then remove tick mark for one .So that. you are making tick mark for only one time for those objects.
with rgds,
Anil Kumar Sharma .P

Doubt in creating the transport request for "STANDARD TEXT""

HI ALL,
i used the standard text in scripts but i am getting the problem while creating the transport request for that,
i am not able to create the transport request for that,if anybody knows plzlet me know,
this is very urgent,
thanks and regards,
saikrishna.

HI SURESH ,
THANKS FOR UR IMMEDIATE REPLY ,
i executed that report in that i have given
Name of Correction : ZREPST
Textkey-object:
Text key name:
Text key - ID: ST
Text key - language :EN
Here Textkey-object,Text key name
wat i have to ,give after that ,can i execute that ,
will it create the request.
plz let me know,now ur answer is very valueble ,because ,now i have to release everything,
plz let me know immediately,
thanks and regards,
saikrishna.

Error when importing a Transport request in CHARM???

Hi all,
when i am trying to import a transport a request( thru CHARM) , its throwing an error " No valid system specified (Q11)" and "Import error: Check TMS Alert Viewer in target system"
Note::I was able to create a Transport request , release it but facing problem while importing to quality system.development system is ECC5.0 and quality is ECC6.0
rgds,
Anand

HI abhi,
i havecreated the domain link, my ECC5.0 and ECC6.0 are in one domain of which ECC5.0 is domain controller,now i configured Solution manager as new domain controller and created a link between these two domains...
now my queries are:
1.is it enuf if i create a link between or even shud i create som transport routes between the newly added system from other domain and the existing domain
2.i am not able to see the STMS configuration in solution manager system.ie in my ECC5.0 system( domain ctrller)if i goto STMS->Overview menu-> transport routes i see the configuration, which i cannot see by logging into solution manager and wentto STMS->Overview menu-> transport routes i dont see
rgds,
Anand

CHaRM-Is that possible to create multiple Transport Request in UC

HI Gurus,
Quick question on ur.gent correction using Solution Manager CHaRM in EHP1. Is it possible to create multiple transport request(TR) for single ur.gent correction (UC). DO NOT confuse with transport task.
For example, after I created transport request and developer start working and release the task, realised to add another transport request for same UC. When I tried, it did not create any TR but checked the message found that
Schedule Manager: Monitor
Job Status: Processing completed, but with warnings
Program Name: /TMWFLOW/SCMA_TRORDER_CREATE
Action to be checked: Ur.gent Correction: Create Transport Request
There is already an open request, XXXXXXXXXX, for this project
So only way I can do that I released the TR and able to create another TR.
May be wondering why I need to create another TR, why not create TASK and work on that.
But this is the requirement at our company.
I will appreciate the effort and time to provide me the solution of this.
Thanks
Ava

Hi Ragu,
That's really quick turn around. Unfortunately not able to found whatever you mentioned in your message. Here is detail,
I navigate to Actions - Depending on Status, found the entry as
Trans. Type     StatProf         UserStatus     Seq     Action in SAP Change Manager
SDHF             SDHFHEAD   E0002            10       CREATE_HF
SDHF             SDHFHEAD   E0002            20       CREATE_REQ
SDHF             SDHFHEAD   E0002            30       SAVE_PARTNER
SDHF             SDHFHEAD   E0002            40       SET BO LINKS
Where SDHF - Ur.gent Correction
           E0002 - In Development
           CREATE_HF -        Create an Instance in SAP Change Manager
           CREATE_REQ -     Create Transport Request with Task
           SAVE_PARTNER - Save Partners in Respective Partner Roles
           SET BO LINKS -     Sets Links to Business Objects
I don't see any OPEN_TR.
Any other place need to make change.
Thanks
Ava

How to create a Transport Request?

Hi Experts!
I need transport all my BI objects from Development to QA.
I need create a Transport Request for this by t.code SE09..
What type of transport must I create ? (workbench? customizing?
Is a good idea create a request type 'relocation of complete package' and move all $TMP to a new package?
thanks!

Hi,
Usually when you try to transport the object, the popup for TR at the heading shows which type of TR is required.
All the objects other than like customizing related objects like tables can be transported using workbench TR.
objects which are in $TEM development class are not able to Transport. so you need to change to user defined development class then you can transport.
Reg,
Vishwa

Problem in Creating the Transport using Export option on Portal

Hi All,
We have problem in creating the Transport Packaage using the Portal EXPORT option. Here are the details:
When I tried to create a New Transport package on the Portal, It opens first page asking for the Package name, ID and suffix. After completing the form, when NEXT or Finish button is clicked, the system goes on forever and does not show the next page at all.
This is kind of Urgent as we were not able to transport the objects to QA system
Your help in this reagrd will be well appriciated.
Thanks and regards,
Babu

Hi All,
We have problem in creating the Transport Packaage using the Portal EXPORT option. Here are the details:
When I tried to create a New Transport package on the Portal, It opens first page asking for the Package name, ID and suffix. After completing the form, when NEXT or Finish button is clicked, the system goes on forever and does not show the next page at all.
This is kind of Urgent as we were not able to transport the objects to QA system
Your help in this reagrd will be well appriciated.
Thanks and regards,
Babu

How to create locked Transport Request

Hi All,
I have a requirement where I want to create a transport request that cannot be released to any other system i.e, locked transport. I need this transport to create a package to put my works related to a local tool that I want to create in the development server. This is an internal tool and need not be released to any other system. Please help in creating this transport.
Any help in this will be highly appreciated and rewarded.
Thanks in advance.
With Regards,
Rocky

Instead of creating some "locked transport request" you can create your developments, that you don't want to be transported, as "local objects" (package / development class: $TMP). You decide about this when the system asks you for the assignment to the development class (package).
In this case the system will not put these objects to any transport request - they will stay on your development system.
regards

Problem when creating a sales order with reference by BAPI

I am facing one problem when creating Sales Order.
The scenario is like this while creating SO With reference to an Order type, a new SO will be automatically created with a diff order Type.
I am using "BAPI_SALESORDER_CREATEFROMDAT2".
I am calling this BAPI in USEREXIT_REFRESH_DOCUMENT.
Am I using the right exit to call this Bapi ?
Problems are like :
1. Ref Sales Order creating without Sales Unit .
2. "Object Status does not exist" error msg is coming for Header and Item level(when clicking the status tab and then object status pushbutton). But if testing the bapi from SE37 in test sequence....no such problem persists.
As for example in case of sales unit,in the debugging mode i have seen that BAPI uses a perform to fill the values in the VBAP structure.But after that when it come back to the main program VBAP remains blank.This ocuurs when the BAPI is called from the exit whereas if tested from SE37, VBAP retains the value.
Can u suggest in this ? This is very very urgent............
Thx in Adv.........................

Thanks........
Your suggestion was a great help to me.I have used a custom FM and called it in starting new task.
Since i am a university fresher working in SAP for nearly 1 year.....can you please explain me the difference between in update task and starting new task.Why the problem was occuring for which you have suggested to call a custom function module.
what is V1 update and V2 update?Is it attached with asynchronous ans synchronous update.It would be a great help to me if you kindly clear my confusions....
thanks in advance.

Problem when creating Database (Database, OS and hardware Configuraiton included)

Problem when creating Database:
Below are the problems, which I faced during creation of database. I have mentioned both the problem separately. Plus the log file maintained by Oracle during installation. It might help in diagnosing the error. Plus a little conclusion with I turned up to.
There are two problems, when creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
Problem # 1:
When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
I searched following oracle help for this problem.
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Problem # 2:
When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
I searched following oracle help for this problem.
ORA-12571: TNS:packet writer failure
Cause: An error occurred during a data send.
Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Log File Showing Error :
Result code for launching of configuration tool is 0
Launched configuration tool Oracle Database Configuration Assistant
Command which is being spawned is C:\Program Files\Oracle\jre\1.1.7\bin/jrew.exe -Duser.dir=d:\oracle\ora81\assistants\dbca\jlib -classpath ";C:\Program Files\Oracle\jre\1.1.7\lib\rt.jar;C:\Program Files\Oracle\jre\1.1.7\lib\i18n.jar;d:\oracle\ora81\jlib\ewt-3_3_6.jar;d:\oracle\ora81\jlib\share-1_0_8.jar;d:\oracle\ora81\jlib\swingall-1_1_1.jar;d:\oracle\ora81\assistants\dbca\jlib\dbassist.jar;d:\oracle\ora81\assistants\jlib\jnls.jar;d:\oracle\ora81\assistants\jlib\acc.jar;d:\oracle\ora81\jlib\help-3_1_8.jar;d:\oracle\ora81\jlib\ice-4_06_6.jar;d:\oracle\ora81\jlib\netcfg.jar;" DBCreateWizard -progress_only -responseFile NO_VALUE -createtype seed -numusers NO_VALUE -apptype NO_VALUE -cartridges NO_VALUE -options NO_VALUE -demos NO_VALUE -seedloc d:\oracle\ora81\starterdb -sid ora8i -orabase d:\oracle -clususer NO_VALUE -cluspswd Protected value, not to be logged -nodeinfo NO_VALUE -gdbName ora8i
Invalid Exit Code. The following result code will be used for configuration tool: 1
Configuration tool Oracle Database Configuration Assistant failed
The datafiles will be copied from the CD to d:\oracle\oradata\ora8i. The Oracle Database Configuration Assistant will begin creating the database.
An Oracle database will be created for you. The database name will be ora8i. The system identifier for the database will be ora8i. The password for the INTERNAL account will be ******, the SYS account will be change_on_install and the SYSTEM account will be manager.
Log File of Installation:
The above code is a part of the log file, which is generated by Oracle installer at C:\Program Files\Oracle\Inventory\Log\..
I just pasted the part of code, highlighted is the code showing error with Oracle Database Configuration Assistant.
Software & Hardware Configuration are as follow:
Software:
Database
Oracle 8.1.7.0.0 (Oracle8i)
Operating System
Microsoft Windows 2000
5.00.2195
Service Pack 2
Hardware:
x86 Family 6 Model 8 stepping
10
AT/AT COMPITABLE
260,400 KB RAM

Dont't worry about that. Before you
create a table(or view), it is wise to
drop the table(or view) with the same name.
If the name doesn't exist, of course there
is an error message. See the following script:
-------------------begin-----------
drop table students cascade constraints;
create table students (
sid varchar2(5),
fname varchar2(20),
lname varchar2(20) not null,
minit char,
primary key (sid));
--------------end-----------------
Good day!
null

Problem when creating CAF Entity Service finder Methods

Guys,
Can any one please suggest me appropriatly to the below problem.
I am using NWDS 7.06. I have no problem when creating CAF project, Application Service and Entity Service even.
But in the Entity Service:
1. Add a string or longtext attribute.
2. try to create a custom finder method in operations tab, during that operation i am not finding the attribute which i have created in step1.
That means i am not able to create the my own finder methods with parameters.
I was able to do that in some version long ago but i have forgotten that NWDS version.
summary of Problem Is: " Cannot create custom methods with custom parameters in Entity Service"
Can you please suggest me the right version or a solution to this problem on urgent basis please.
I promise you that i will give you full points to you who ever gives me the right solution.
Please mail your suggestions to [email protected]

Guys,
I have solved the problem successfully. Thanks for your attention.

How to create a transport request with query and only with its structure.

HI guru,
how to create a transport request with query and only with its structure.transport request should not include any other query items like ( variables, conditions...etc)
thanks in advance.
venkata

Hi,
Goto RSA1 and then Transport Connection -> In SAP Transports select Object Types-> Query Elements -> Then select Query->Give Technical name of the query and then select for transfer. In the right side you can choose the components which you wanted to transport.
Regards,
anil

Problem when Creating Project (Composite Application Services) in NWDS

I've seen a few posts regarding this but I don't feel as if any real solution was given.
I just installed Netweaver Developer Studio (7.0.15) with the current JDK/JRE (1.6.0_07). When trying to create a new Composite Application Services project within the Studio, using the new project wizard, I get an error: Problem when Creating Project.
I get the EJB Module and Dictionary to create within my navigator with no problems, however, during the creation of the metadata, the error occurs. I do have the metadata folder appear within the navigator, but nothing in it. None of the other three items are created.
I have tried the attempt at deleting the metadata folder within my workspace directory and trying again but the same exact result occurs.
Is there any other solution out there for this problem besides attempting to find older versions of NWDS, etc. that are more "stable"?
Thank you!

Durga,
Very simple but effective solution.
I had tried uninstalling / re-installing NWDS with no effect but uninstalling / re-installing NWDS AND all java related products on my machine did work.
Note: For anyone else with this issue in the future. I installed the Java SDK / JRE 1.4.2_18 with NWDS 7.0.15 in case this is also a possible issue with versions.
Thanks, Durga!

Problem when creating a transport request

Similar Messages

Maybe you are looking for