Problem when creating contract with foreign trade / customs

Hi,
I encountered a problem when creating contract / outline agreement.
I used ME31K to create a contract with a vendor outside of our country. I suppose that I should be able to see "Foreign Trade / Customs" in "Header" menu, but this entry is gray, I cannot enter it.
I tried to create a scheduling agreement using ME31L with the same vendor and material, I can see "Foreign Trade / Customs" information. I suppose these two process are similar, aren't they?
Btw., I checked the master data according to this thread:
http://help.sap.com/saphelp_46c/helpdata/en/ed/3b6cc697e711d1b4e20000e82d81b0/content.htm
Can anyone give me some hint?
Thanks!
Charlie

These two processes are different:
The Contract agreement or the Outline Agreement is that create the centrally contract (cross-plant) where it can maintain different pricing conditions for each and every plant. It creates the Release Order with reference to Outline Agreement. No detailed delivery schedule can be made in the Release Order. No Release documentation is created. Only time-dependent conditions can be created, Some Item Category 'M' and 'W' can be used.
Whereas the Scheduling Agreement is the Plant Location what must be entered in the Scheduling Agreement. Its no need to create any other purchasing document except for delivery schedule line via Transaction ME38 or MRP running (with the appropriate setting of Source List). Delivery Schedule line items are created subject to your specific requirement. It can create both Scheduling Agreement with or without release of Documentation (subject to the Document Type LP or LPA) with the selection of either FRC or JIT delivery schedule. Either time-dependent or time-independent conditions can be created subject to the customizing in the Document Type of the Scheduling Agreement. Item Category 'M' and 'W' can not be used.

Similar Messages

Problem when creating Database with Database, OS and hardware Configuraiton

Problem when creating Database:
There are two problems, which I faced during creation of database. When creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
Problem # 1:
When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
I searched following oracle help for this problem.
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Problem # 2:
When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
I searched following oracle help for this problem.
ORA-12571: TNS:packet writer failure
Cause: An error occurred during a data send.
Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Software & Hardware Configuration are as follow:
Software:
Database
Oracle 8.1.7.0.0 (Oracle8i)
Operating System
Microsoft Windows 2000
5.00.2195
Service Pack 2
Hardware:
x86 Family 6 Model 8 stepping
10
AT/AT COMPITABLE
260,400 KB RAM

user563502 wrote:
I am working on Solaris 8. What is Alert_SID.log? where can I find it?
ThanksFor the responsible of the upgrade of Oracle database, not even know what Alert log is?
to be honest with you, this is not your work.

Hierarchy problem when creating IDoc with multiple headers

Hi,
In general, When you create an inbound IDoc for the IDoc Type FIDCCP02, you have all the data records arranged in hierarchical order (while viewing it in the we02 transaction).
Our requirement is to have m number of headers(E1FIKPF) and in turn it has n number of items(E1FISEG) inside a same IDoc. We have a problem in viewing the hierarchy of them in the data records tab. It comes down in a flat order without hierarchical division.
If we have only one header, we get the hierarchy sorted by default. If we have multiple headers we see the same problem again.
We guess some make-ups in the EDIDD structure which contains segnum, hlevel etc needs to be done.
Let us know the correct method to get this fixed.
Points will be rewarded.Thanks in advance.
Regards,
Reni

Every Idoc segment has a place to put in the parent segment for that Idoc. When you "fill" the Idoc , this tsep might not be executing for some reason.
Is this some customer development?
in EDID4 ,see these fields
PSGNUM-Number of the hierarchically higher SAP segment
HLEVEL Hierarchy level.
Regards

KPIC problem when creating so with Forte C++

Hi,
I am trying to create a shared object library using Forte C++. The project contains about 80 files, all of which are compiled separately with the -KPIC option set. Whe I try to create the library (using the -G) option I get an error that says something similar to:
Too many small pic references
4785 found, 2048 max, try compiling some modules using -K PIC
Since all the modules WERE compiled with -KPIC and not -Kpic, this message doen't make a lot of sense to me.
What am I missing?
If it makes a difference, this project is being built under Solaris 2.6.
TIA,
Dan S.

I see this is an old posting, but for the benefit of anyone else reading this, -G does a -Kpic automatically.
The -Kpic will override the -KPIC.
Try -xcode=pic32 and you will see a clearer error message.

Problem when creating Database (Database, OS and hardware Configuraiton included)

Problem when creating Database:
Below are the problems, which I faced during creation of database. I have mentioned both the problem separately. Plus the log file maintained by Oracle during installation. It might help in diagnosing the error. Plus a little conclusion with I turned up to.
There are two problems, when creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
Problem # 1:
When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
I searched following oracle help for this problem.
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Problem # 2:
When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
I searched following oracle help for this problem.
ORA-12571: TNS:packet writer failure
Cause: An error occurred during a data send.
Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Log File Showing Error :
Result code for launching of configuration tool is 0
Launched configuration tool Oracle Database Configuration Assistant
Command which is being spawned is C:\Program Files\Oracle\jre\1.1.7\bin/jrew.exe -Duser.dir=d:\oracle\ora81\assistants\dbca\jlib -classpath ";C:\Program Files\Oracle\jre\1.1.7\lib\rt.jar;C:\Program Files\Oracle\jre\1.1.7\lib\i18n.jar;d:\oracle\ora81\jlib\ewt-3_3_6.jar;d:\oracle\ora81\jlib\share-1_0_8.jar;d:\oracle\ora81\jlib\swingall-1_1_1.jar;d:\oracle\ora81\assistants\dbca\jlib\dbassist.jar;d:\oracle\ora81\assistants\jlib\jnls.jar;d:\oracle\ora81\assistants\jlib\acc.jar;d:\oracle\ora81\jlib\help-3_1_8.jar;d:\oracle\ora81\jlib\ice-4_06_6.jar;d:\oracle\ora81\jlib\netcfg.jar;" DBCreateWizard -progress_only -responseFile NO_VALUE -createtype seed -numusers NO_VALUE -apptype NO_VALUE -cartridges NO_VALUE -options NO_VALUE -demos NO_VALUE -seedloc d:\oracle\ora81\starterdb -sid ora8i -orabase d:\oracle -clususer NO_VALUE -cluspswd Protected value, not to be logged -nodeinfo NO_VALUE -gdbName ora8i
Invalid Exit Code. The following result code will be used for configuration tool: 1
Configuration tool Oracle Database Configuration Assistant failed
The datafiles will be copied from the CD to d:\oracle\oradata\ora8i. The Oracle Database Configuration Assistant will begin creating the database.
An Oracle database will be created for you. The database name will be ora8i. The system identifier for the database will be ora8i. The password for the INTERNAL account will be ******, the SYS account will be change_on_install and the SYSTEM account will be manager.
Log File of Installation:
The above code is a part of the log file, which is generated by Oracle installer at C:\Program Files\Oracle\Inventory\Log\..
I just pasted the part of code, highlighted is the code showing error with Oracle Database Configuration Assistant.
Software & Hardware Configuration are as follow:
Software:
Database
Oracle 8.1.7.0.0 (Oracle8i)
Operating System
Microsoft Windows 2000
5.00.2195
Service Pack 2
Hardware:
x86 Family 6 Model 8 stepping
10
AT/AT COMPITABLE
260,400 KB RAM

Dont't worry about that. Before you
create a table(or view), it is wise to
drop the table(or view) with the same name.
If the name doesn't exist, of course there
is an error message. See the following script:
-------------------begin-----------
drop table students cascade constraints;
create table students (
sid varchar2(5),
fname varchar2(20),
lname varchar2(20) not null,
minit char,
primary key (sid));
--------------end-----------------
Good day!
null

Problem when creating a sales order with reference by BAPI

I am facing one problem when creating Sales Order.
The scenario is like this while creating SO With reference to an Order type, a new SO will be automatically created with a diff order Type.
I am using "BAPI_SALESORDER_CREATEFROMDAT2".
I am calling this BAPI in USEREXIT_REFRESH_DOCUMENT.
Am I using the right exit to call this Bapi ?
Problems are like :
1. Ref Sales Order creating without Sales Unit .
2. "Object Status does not exist" error msg is coming for Header and Item level(when clicking the status tab and then object status pushbutton). But if testing the bapi from SE37 in test sequence....no such problem persists.
As for example in case of sales unit,in the debugging mode i have seen that BAPI uses a perform to fill the values in the VBAP structure.But after that when it come back to the main program VBAP remains blank.This ocuurs when the BAPI is called from the exit whereas if tested from SE37, VBAP retains the value.
Can u suggest in this ? This is very very urgent............
Thx in Adv.........................

Thanks........
Your suggestion was a great help to me.I have used a custom FM and called it in starting new task.
Since i am a university fresher working in SAP for nearly 1 year.....can you please explain me the difference between in update task and starting new task.Why the problem was occuring for which you have suggested to call a custom function module.
what is V1 update and V2 update?Is it attached with asynchronous ans synchronous update.It would be a great help to me if you kindly clear my confusions....
thanks in advance.

Foreign trade / Customs info

Hello experts,
I have a problem with billing split. The scenario is the following:
I have created a purchasing organization that belongs to a society called UMA. This purchasing organization has a plant (UMC) without any warehouse (at the moment, it will be only used to create third party orders).
The customization of the plants and materials involved in this problem are:
Plant UMC: Located (customized) in France (belongs to UMA society)
Plant POC: Located (customized) in Spain (belongs to POA society)
Material JT11: Material type: Third party. Created at POC plant. Source country ES (material master).
Material INSTALATIONED: Material type: Third party. Created at UMC plant. Source country FR (material master).
The sales order is created as follows:
Sales order created at UMA sales organization (that belongs to UMA society). The ship to party and sold to party are the same and both are French (Customer country: FR).
The sales order has two items:
Material JT11, the plant has been determined as POC
Material INSTALATIONED, the plant has been determined as UMC
At the moment, all seems correct. The next steps are:
Confirm sales order. (OK)
Purchase order of the materials (OK) (each one thought the corresponding purchasing organization, in function of its plants)
Good receipt (OK)
Billing (from the sales orders). (PROBLEM).
The bill is made from the sales order (UMA organization). The billing process splits in two. The split analysis is the following:
(from SAP)
Split analy.
Split due to different header data
Fld Name                        $000000001           $000000002
Export indicator                Y
        Number of foreign trade data i 0000086130
The first position (JT11 material that belongs to Spanish plant, POC) contains foreign trade / Customs information. On the other hand, the second item (INSTALLATIONED material that belongs to French plant, UMC) does not contain any information about foreign trade / Customs.
The question is: Is it possible to avoid the bill being split in two and still save the information related to foreign trade / Customs (otherwise the Intrastate would not work)?
I tried to modify the copy control (between sales order and bill), but the splitting is only avoided when the foreign trade / Customs information is lost (changing the header field Determ.export data to null. It was A).
Thank you very much for your help and attention.
Ricard.

Hi
The foreign trade settings available under Sales & distribution tree in confirguration is enough.
Regarding the Foreign law and other details , we will usually get them on the project.
E.g.
We have Eurpoean Sales List to be subimitted to govt everymonth
In India, we submit the Sales Tax report.
Basic understanding is , Ship to Party and Sold to Party contry are different .
we need to maintain few settings as Mode of Transport , Country of Origin , Commodity code and some default settings .
Regards
KRSNA

Foreign Trade / Custom data for local Client

Hi SD's,
I've an issue regarding the creation of Billing document, because for a local Client it is asking me for this data.
We've a 3 scenarios working:
1- Normal sales inside the country for a certain Order Type - ZA, Delivery Type - ZA and Billing doc Type - ZA. Flow works ok.
2- Export sales - flow work ok and the user as to fill Foreign Trade / Custom data (using the same documents types as above);
3- Intermediation - for local client or to export, here is where the system fails when we've local Client it still ask for Foreign Trade / Custom data and it should not. In this scenario we are using Order Type - ZB, Delivery Type - ZB and Billing doc Type - ZB and we've CO-PA for this scenario.
I think this may be related because before we've this scenario integrating with CO-PA everything worked perfect.
Does anyone have a clue on this?
I've read some notes regarding Foreign Trade / Custom data but none of them seam to answer my problem.
Thanks in advance.
Regards,
BO.

Hi bruno
It is in copy control VTLA and in VTFL also . select your order type and delivery type and click on blue lens on top left. There try to maintain as follows:-
Order requirements:::::::001
Combination requirmt::::051
Header Data:::::::::::::::::001
Similarly, go to VTFL, select your delivery type and billing type and click on blue lens on top left. There for the field Determine export data, maintain as per your requirement and for Copying requirements, maintain routine 003.
Regards
Srinath

Problem when creating CAF Entity Service finder Methods

Guys,
Can any one please suggest me appropriatly to the below problem.
I am using NWDS 7.06. I have no problem when creating CAF project, Application Service and Entity Service even.
But in the Entity Service:
1. Add a string or longtext attribute.
2. try to create a custom finder method in operations tab, during that operation i am not finding the attribute which i have created in step1.
That means i am not able to create the my own finder methods with parameters.
I was able to do that in some version long ago but i have forgotten that NWDS version.
summary of Problem Is: " Cannot create custom methods with custom parameters in Entity Service"
Can you please suggest me the right version or a solution to this problem on urgent basis please.
I promise you that i will give you full points to you who ever gives me the right solution.
Please mail your suggestions to [email protected]

Guys,
I have solved the problem successfully. Thanks for your attention.

EN99 Import Simulation-Foreign Trade / Customs

Hi ,
I am using TCode EN99. When I simulate import processing with reference to
- a purchase order line item and it's ok (with RMIMPO)
- a good receipt and the system doesn't calculate the custom duties.
I checked the documentation, it refers to program name:
"Program RVEXIMSI Description
Import Simulation
Buyers can use the import simulation function to simulate an import process that saves time and expense.
Output
When you execute the program, you receive the following information from the simulation run:
1. Information on customs tariff numbers and customs duties
2. Information on the preference situation
3. Information on verification documents and authorities
4. Log information on the simulation run
Note
The link to pricing allows you to simulate different scenarios for the customs duty rate to be paid.
You can use other factors in pricing that influence values, such as surcharges and discounts, freight charges or insurance costs, for the import simulation. The relevant condition types are stored in pricing procedure RMIMP0.
Requirement
A prerequisite for a correct simulation run is that you maintain all the necessary data, such as determination tables, in Customizing.
In order to calculate customs duties, you have to maintain the relevant condition records.
The standard system contains pricing procedure RMIMP0 with the following condition types:
CU00: Gross price - Customs simulation
CURB: Total discount
CUFR: Freight/Quantity
CUIN: Insurance
CUZK: Customs quota
CUPE: Pharmaceutical products
CUAS: Customs exemption
CUPZ: Customs duty rate - Preference
CUDL: Customs duty rate - Third country
CUAD Anti-dumping
Access sequence 0002 is used for condition type CU00.
Note that the info record category field remains blank or 0 when you maintain the relevant condition records.
Also note that the term "home country" corresponds to "importing country"."
The good receipt use standard procedure RM0000, even changing procedure to RMIMPO, the duties and gross price are not calculated automatically.
Can anyone help me on how this program it's work and how custom duties are calculated automatically?
Regards,

HI, Mauro!
It seems that you are familiar with the import simulation in Foreign Trade Customs.
Please consider the issues I have, maybe you can help me:
1. In simulation (TCode: EN99), I need to convert the value of customs taxes into the local currency (RON) using the customs exchange rate.
The customs taxes in import simulation are calculated into the currency of the PO (USD).
2. I need to bring onto the CUFR freight condition the value of freight expenditures in the shippment cost document (FRB1), so that they are included into the base value for calculating the customs taxes (again in simulation).
(If I have the freight condition as a value in the inforecord, then the simulation knows to get the value and includes it in the import pricing schema, otherwise it does not.)
Looking forward to hearing from you or anyone else who faced the same issues,
Monica

Problem when creating Database:

There are two problems, which I faced during creation of database. When creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
Problem # 1:
When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
I searched following oracle help for this problem.
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Problem # 2:
When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
I searched following oracle help for this problem.
ORA-12571: TNS:packet writer failure
Cause: An error occurred during a data send.
Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.

user563502 wrote:
I am working on Solaris 8. What is Alert_SID.log? where can I find it?
ThanksFor the responsible of the upgrade of Oracle database, not even know what Alert log is?
to be honest with you, this is not your work.

Problem when creating Database (Database, OS and hardware Configuraiton)

Problem when creating Database:
There are two problems, which I faced during creation of database. When creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
Problem # 1:
When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
I searched following oracle help for this problem.
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Problem # 2:
When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
I searched following oracle help for this problem.
ORA-12571: TNS:packet writer failure
Cause: An error occurred during a data send.
Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Software & Hardware Configuration are as follow:
Software:
Database
Oracle 8.1.7.0.0 (Oracle8i)
Operating System
Microsoft Windows 2000
5.00.2195
Service Pack 2
Hardware:
x86 Family 6 Model 8 stepping
10
AT/AT COMPITABLE
260,400 KB RAM

user563502 wrote:
I am working on Solaris 8. What is Alert_SID.log? where can I find it?
ThanksFor the responsible of the upgrade of Oracle database, not even know what Alert log is?
to be honest with you, this is not your work.

Authorization when creating contract account

Dear gurus,
I am now have a problem with authorization when creating Contract Account for Business Partner with the scenario: each user only have right to create Contract Account for some BP Number Range that I determine in their Role. Is that possible to do this scenario?
Pls help me,
Thanks a lot

Hi,
May be you can set the same in the User Authorization roles where in you can restrict the user to create Contract account for certain BP only. May be you can work along with your Basis consultant to solve this issue or you can also try for validation rules if it works for this scenario.
regards,
radhika

When does incompleteness of foreign trade matters for accounting document?

Hi,
When creating billing from an SO without delivery, the accounting document is created even though foreign trade data is incomplete.
While when creating billing from a delivery, the accounting document is not created since foreign trade data is incomplete.
My question is, When does incompleteness of foreign trade matters for accounting document?
Please advice.
Thanks!

Hi,
I donu2019t have an exact answer but I take a guess that, when creating billing from a delivery, the accounting document is not created since foreign trade data is incomplete - it might be because the necessary information for delivery is not maintained, for instance mode of transport for Foreign Trade, Domestic mode of transport (you can see them in billing doc u2013 header u2013 foreign trade/customs) most of the data maintained in material master.
Whereas for order related billing, these data might not be necessary as it has no delivery.
Note: This is just a guess.
Also take a look at the below link. It might be useful for you.
Re: foreign data incomplete appearing after deactivating
Good luck
Sats.

Problem when creating business partner

Dear Expert,
I have a problem when creating business partner from T-code BP
I can't input vendor number in company code header data
The vendor account field is set to required entry.
When create business partner, I make some entry like :
Business partner category : organization
BP Role : Landlord with vendor account
Grouping : external number assignment
Company Code : 1000
The problem is everytime i try to input vendor number, it always failed.
The Vendor account field always display ' <external> '
It's strange.. the vendor field it's seem locked by grouping
What should I do??
___Company Code Header Data___
Company Code : 1000
Customer : <external>
Vendor : <external>
I need your advise.. thank you very much
Thanks,
tweety

Hi,
I would like to suggest you some SAP notes that contain useful information aobut customer-vender intergration of ERP2005.
956054 BP_CVI Customer-vendor integration as of ERP2005 (ECC600)
This notes describes the changes (new development) of CVI AND the necessary customizing settings.
In short, CVI is now bidirectional.
1. BP -> Customer/Vendor: it depends on the roletype configuration, if a customer/vender is created.
2. Customer/Vendor -> BP: it depends on the account group if a BP is created.
Data is changed then synchronoously.
Further notes that might be of interest.
851445 BP_CVI: Details about reports to be executed for ERP 2005
727205 Conversion of industry Customizing in BUPXPRA12
1077616 Business Partner Upgrade FAQ
If you have further questions please let me know.
Regards, Franz

Problem when creating contract with foreign trade / customs

Similar Messages

Maybe you are looking for