Problem when creating update rules

Hi Friends..
I'm actually having a problem when I'm creating update rules from my cube to my Infosource. This infosource is created by Dierct update of Master data (ZXXXX) Infoobject. the error which is popping up is ,
Data source ZMMOBJ1 not maintained (check your entries)
Message no. RSAU252
Diagnosis
The data source is not active
Can some one guide me, How I can resolve this error.??
and where the problem must have been??
Thanks alot in advance,

Hi,
Check the infosource you are using for the cube. you cant use direct update infosource.
'Direct update of master data' infosource updates into the infoobject.
you will not have update rules for this direct update.
you use update rules only when you use flexible update infosource.
hope its clear.
shylaja.

Similar Messages

CX_RSR_X_MESSAGE when creating update rules

Hi,
I'm trying to activate SAP Demo scenario for procurement, infocube 0D_PU_C01. I have activated everything except for update rules. Activation of update rules fails with CX_RSR_X_MESSAGE short dump. When I try to create UR manually I get the same error after filling the first screen.
I'm getting pretty out of any ideas. I debuged the error, the deepest I could get was the RST_TOBJ_DERIVABLE function module, called with parameters:
I_TIMNM_FROM = '0CALDAY'
I_TIMNM_TO = '0CALMONTH'
The FM goes like this:
*... ist überhaupt eine Zeit ?
IF cl_rsr=>check_time( i_timnm_from ) EQ rs_c_false.
e_subrc = 4. RETURN.
ENDIF.
The first line with method cl_rsr=>check_time with parameter '0CALDAY' falls into short dump.
I tried to go deeper, inside the cl_rsr=>check_time method the function module RRSI_VAL_SID_SINGLE_CONVERT is called with parameters:
i_iobjnm = '0IOBJNM'
i_chavl = '0INFOPROV'
- that's where the short dump occurs. The error is quite deep and I dont't see the logic of the code. I just checked for existence of these infoobjects - 0INFOPROV is active, 0IOBJNM doesn't exist (not even business content version).
Anybody help please... Our version is SAP NetWeaver BI 7.0, latest support package SAPKW70012.
Thank you,
Marek

OK, problem solved, I had to reactivate 0IOBJNM infoobject (RSD5).
M

"Error when activating update rule" after changing ODS key

Hi Gurus,
I have problem when transporting in productive system an existing ODS & the update rule linked. The message is : "Error when activating update rule".
This is when i move one field from the key to a simple field of the ODS.
Before transporting requests, i deleted data in the ODS by right-click on ODS --> Request tab --> select the request --> click on delete....
I don't understand because i did the same in Qual environment and everything is OK : transport request & ODS loading...
Please help.....

Hello,
Please try to check/perform the following steps:
1- You must ensure for the update rule have mapping between infosources
   and ODS/CUBEs correct, this means that also these objects need
   to be of the same version in the source system of the transport as in
   target system.
2- Please ensure all infoobjects in the cube are active.Please
   reactivate all the objects again in source system.
3- Ensure all infoobjects are found in the communication structure.
4- Please try to collect the update rule via BW transport connection
   with the grouping option "only necessary objects" and then transport
   those objects again.
Could you please reactivate the infocube and its update rules again
and then create a new transport for this infocube and transport it
again.
Best regards,
Paula Csete

Error when activating update rule

HI BI Expert,
The original transfer rule for 2LIS_11_VAITM was deleted accidently and I created new one and mapped with the existing infosource. The system always generates the following error at the time of transport to another client.
Error when activating update rule D1GOAPD9O0P9CFOY8KBSOUDFA
Activation of the update rules for ZO_SOP_1 ZT_SOP_SALO_ITM
IC=ZO_SOP_1 IS=ZT_SOP_SALO_ITM error when checking the update rules.
Would you kindly be able to suggest me what steps I need to take so as to correct this issue?
Thanks.

Hi,
When you say that update rule was accidently deleted, was that attached to transport request and transported to your QA & PRD at that time.
Because it may happen that, your old rules are still there in QA & PRD and the new rules are failing to overwrite that.
If it is the case, then you may have to open the client for QA & PRD and delete the existing update rule (doesnt sound good practice though), and then create a fresh update rule and transport.
Rgds,
Vikram.
Rgds,
Vikram.

DSO error while creating update rules

Hi All,
i am new to BI 7.0 , while creating update rules for datastore object , i have given the infosource name, and tried to activate it, then i got the error,
ERROR: infoobject 0recordmode is missing from the infosourse
Can any one help, points are assured for the suggestions
Thanks in advance
Peddinti

Hi,
Add 0recordmode info object to your info source and again try to create DTP, 0recordmode is requried in DSO to keep data with history.(like before image,after image,etc), by adding this you dont have any problem, at the time of creating info source itself system will prompt you that this info object is missing do you want to add here say yes.
Regards
Sankar

Problem when creating a sales order with reference by BAPI

I am facing one problem when creating Sales Order.
The scenario is like this while creating SO With reference to an Order type, a new SO will be automatically created with a diff order Type.
I am using "BAPI_SALESORDER_CREATEFROMDAT2".
I am calling this BAPI in USEREXIT_REFRESH_DOCUMENT.
Am I using the right exit to call this Bapi ?
Problems are like :
1. Ref Sales Order creating without Sales Unit .
2. "Object Status does not exist" error msg is coming for Header and Item level(when clicking the status tab and then object status pushbutton). But if testing the bapi from SE37 in test sequence....no such problem persists.
As for example in case of sales unit,in the debugging mode i have seen that BAPI uses a perform to fill the values in the VBAP structure.But after that when it come back to the main program VBAP remains blank.This ocuurs when the BAPI is called from the exit whereas if tested from SE37, VBAP retains the value.
Can u suggest in this ? This is very very urgent............
Thx in Adv.........................

Thanks........
Your suggestion was a great help to me.I have used a custom FM and called it in starting new task.
Since i am a university fresher working in SAP for nearly 1 year.....can you please explain me the difference between in update task and starting new task.Why the problem was occuring for which you have suggested to call a custom function module.
what is V1 update and V2 update?Is it attached with asynchronous ans synchronous update.It would be a great help to me if you kindly clear my confusions....
thanks in advance.

I have a problem when I updated CS6:

hi,
I have a problem when I updated CS6:
Extension Manager 6.0.5 Update
Installation failed. Error Code: U44M1P7
Adobe Photoshop 13.0.5
Done with Errors. Error Code: U44M1P6
What is it?
Thx
Message was edited by: PhotoPlusMore

www.photoplusmore.com.au
 m: 0408 96 11 40
 p: (02) 955 22 707
Begin forwarded message:
From: Lee_Ann_H <[email protected]>
Subject: I have a problem when I updated CS6:
Date: 23 June 2013 2:40:39 PM AEST
To: PhotPlusMore <[email protected]>
Reply-To: [email protected]
Re: I have a problem when I updated CS6:
created by Lee_Ann_H in Adobe Creative Cloud - View the full discussion
Hi PhotPlusMore, these links may help.
Extension Manager: http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-upda tes-ccm.html
Photoshop: http://blogs.adobe.com/photoshopdotcom/2013/06/photoshop-cs6-13-0-5mac -13-0-1-2win-perpetual-license-updates-now-available.html
Let us know if you're still having trouble. Thanks!
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5440165#5440165
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5440165#5440165
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5440165#5440165. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Creative Cloud by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Time consuming problem in Self update rule

Hi all:
We have time consuming problem in self update rule.I have ODS ZOMS001,for this we created self update rule.In process chain we include this self update rule and during delta update,it takes 20 to 25 mins even if there is two records or 10000 records.In delta for this self update rule,it takes the whole records in ODS
EX: If i have 10000 records during initialise and 10 records in Delta update...For the delta self update rule it takes 100010 records..But it only update delta records values.
we have to reduce the total time consuming for this self update during delta..
Waiting for your inputs.
It would be helpful for your valuable reply.
Rgds
MSK

I think retransporting is the only option available to you. You cannot modify anything in your production system.
IF you have a chance to speak with basis people,ask them to open the system status to modifiable for few minutes.
and make necessary changes in production and bring it back to normal (This is not a best practise in all situations).
hope this helps.
Praveen

Where is the option "create update rule" in BW 7.3?

Hi, all.
We have updated our BI sandbox to BW 7.3. After installing cube 0PT_C01 from the BCT, I realized that infosource 0HR_PT_3 is not linked to the cube. So I was trying to manually create the update rule. But that "create update rule" option is nowhere to be found. Can you please advise?
Thanks,
Jonathan.

Hi jonathan,
you are implementing time and labour 0PT_C01.
for that we have only 2 standard data sources
1 is 0HR_PT_1
2 is 0HR_PT_2
in addition to the above data sources we can also use 0HR_PT_3 data source for the info provider 0PT_C01.
PL check the below link
http://help.sap.com/saphelp_nw04/helpdata/en/18/3a8337fb02735ce10000009b38f8cf/content.htm
regards
venuscm

Error when activating update rule after transporting to QA

Hi,
When we transport Info cubes and update rules along with Process chains. There are the following errors in Transport request(XXXXXXXX).
1. Error when activating update rule 22HSFD3ZMALU46LS0R8PRF2MW
IC=ZSDPCXY2 IS=2LIS_11_VAITM error when checking the update rules
2. Error when activating update rule 7NT4WIDPDCN2ERFDRXIGH95PM
IC=ZSDPCXY2 IS=2LIS_12_VCHDR error when checking the update rules
and etc.
Then we activated and saved all the erroneous update rules in another tranport request(YYYYYYYY) and again we transported alongwith the previous transport request(XXXXXXXX).
The last request(YYYYYYYY)was successfully tranported and still there are same errors in TR(XXXXXXXX).
Quick answers will be highly appreciated.
Regards,
Vijay

Hi Vijay,
Next time you would have transport only (YYYYYYYY). Transport Request (XXXXXXX) was not required to be moved.
Normally Update Rule gets deactivated in QA when any changes to the CUbe/ODS are moved.
Thus either you can transport transport request for only active update rule to QA or activate your UR directly in QA system in case you have authorization to do that.
Regards,
Rohini

Error when transpotring Update Rules

Dear colleagues.
When transporting an update Rules into our Quality enviroment the system pops up the following error:
IC=ZWEPP_C02 IS=ZWE_BOM_RMX_IS syntax error: rows 0.
I've verified the Update Rules on the Quality System and everything is correct but it remains inactive due to the transport fails.
I would appreciate your feedback.
Thanks in advance.

Dear khaja.
I send you the transport log as well as the Return Code.
Error when activating update rule 5MYASZMBOIQZSRR60674OBKJ3
IC=ZWEPP_C02 IS=ZWE_BOM_RMX_IS error when generating InfoCube Update program
IC=ZWEPP_C02 IS=ZWE_BOM_RMX_IS syntax error: rows 0 (When generating the update program for data target ZWEPP_C02, InfoSource ZWE_BOM_RMX_IS, a syntax error occured in row 0. Message no. RSAU466)
Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
Please, let me know if you need anything else.
Thanks.

Error when copying update rules!!!

Hello All,
I am trying install 0SD_C03 from business content, however I am getting following error. Cube got installed properly.
Error when copying update rules
Patch levels are
SAP_BW - 0014
BI_CONT - 0005
Please help me in solving this error.
Regards,
PNK

Hi,
The error message show as below. There is no longtext
Error when copying update rules
Message no. RSAU457
But, when I installed FI-AP cubes, update rules are installed without any error. Is there any settings differs from FI to logistics datasources?
Regards,
PNK

Cannot Create Update Rule from Infosource to Cube

Hello;
I am a beginner to BI and am learning. This may be a very basic question, but I got stuck.
In the create update rule screen, I get an error message that says
Data Source (whatever the name is) not maintained. (check your entries)
Could some one help as to where I went wrong?
Thx,
Sushma
Su

Goto your InfoSource and open DataSource Structure and transfer structure. Check if the structure is correct, make the necessary changes if required and activate it. Then create update rules providing correct infosource name. Until you create /activate your transfer structure, you won't be able to create update rules.
Reward point if helps.
Regards,
Ashok
Message was edited by:
ashok saha

Problem when creating Database (Database, OS and hardware Configuraiton included)

Problem when creating Database:
Below are the problems, which I faced during creation of database. I have mentioned both the problem separately. Plus the log file maintained by Oracle during installation. It might help in diagnosing the error. Plus a little conclusion with I turned up to.
There are two problems, when creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
Problem # 1:
When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
I searched following oracle help for this problem.
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Problem # 2:
When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
I searched following oracle help for this problem.
ORA-12571: TNS:packet writer failure
Cause: An error occurred during a data send.
Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Log File Showing Error :
Result code for launching of configuration tool is 0
Launched configuration tool Oracle Database Configuration Assistant
Command which is being spawned is C:\Program Files\Oracle\jre\1.1.7\bin/jrew.exe -Duser.dir=d:\oracle\ora81\assistants\dbca\jlib -classpath ";C:\Program Files\Oracle\jre\1.1.7\lib\rt.jar;C:\Program Files\Oracle\jre\1.1.7\lib\i18n.jar;d:\oracle\ora81\jlib\ewt-3_3_6.jar;d:\oracle\ora81\jlib\share-1_0_8.jar;d:\oracle\ora81\jlib\swingall-1_1_1.jar;d:\oracle\ora81\assistants\dbca\jlib\dbassist.jar;d:\oracle\ora81\assistants\jlib\jnls.jar;d:\oracle\ora81\assistants\jlib\acc.jar;d:\oracle\ora81\jlib\help-3_1_8.jar;d:\oracle\ora81\jlib\ice-4_06_6.jar;d:\oracle\ora81\jlib\netcfg.jar;" DBCreateWizard -progress_only -responseFile NO_VALUE -createtype seed -numusers NO_VALUE -apptype NO_VALUE -cartridges NO_VALUE -options NO_VALUE -demos NO_VALUE -seedloc d:\oracle\ora81\starterdb -sid ora8i -orabase d:\oracle -clususer NO_VALUE -cluspswd Protected value, not to be logged -nodeinfo NO_VALUE -gdbName ora8i
Invalid Exit Code. The following result code will be used for configuration tool: 1
Configuration tool Oracle Database Configuration Assistant failed
The datafiles will be copied from the CD to d:\oracle\oradata\ora8i. The Oracle Database Configuration Assistant will begin creating the database.
An Oracle database will be created for you. The database name will be ora8i. The system identifier for the database will be ora8i. The password for the INTERNAL account will be ******, the SYS account will be change_on_install and the SYSTEM account will be manager.
Log File of Installation:
The above code is a part of the log file, which is generated by Oracle installer at C:\Program Files\Oracle\Inventory\Log\..
I just pasted the part of code, highlighted is the code showing error with Oracle Database Configuration Assistant.
Software & Hardware Configuration are as follow:
Software:
Database
Oracle 8.1.7.0.0 (Oracle8i)
Operating System
Microsoft Windows 2000
5.00.2195
Service Pack 2
Hardware:
x86 Family 6 Model 8 stepping
10
AT/AT COMPITABLE
260,400 KB RAM

Dont't worry about that. Before you
create a table(or view), it is wise to
drop the table(or view) with the same name.
If the name doesn't exist, of course there
is an error message. See the following script:
-------------------begin-----------
drop table students cascade constraints;
create table students (
sid varchar2(5),
fname varchar2(20),
lname varchar2(20) not null,
minit char,
primary key (sid));
--------------end-----------------
Good day!
null

Problem in the update rule routine in BIW production

hi,
I have encountered a problem in the update rule, the problem is, there is a routine to calculate the age of a person, age is a key figure,
The problem is that the key figure is not being calculated.
we had encountered the same problem in the bw developent, we reinstaled the update rule, and the age was calculated correctly. Where as in production we cannot instal from business cotent, should we transport the perticular update rule once again?
if there is any other solution, please let me know.
Thanks in advance.
regards chetana.

I think retransporting is the only option available to you. You cannot modify anything in your production system.
IF you have a chance to speak with basis people,ask them to open the system status to modifiable for few minutes.
and make necessary changes in production and bring it back to normal (This is not a best practise in all situations).
hope this helps.
Praveen

Problem when creating update rules

Similar Messages

Maybe you are looking for