Problem when dialing *166# to check account balanc...
When dialing *166# with N900 to check/refill my phone account balance, it shown "Incorrect number". Does Nokia have the solution for the problems?
Solved!
Go to Solution.
belialshoxley
Thank you sir it did work (WE STILL NEED A FIX FROM NOKIA )
JUST TO HELP OUT A PERSON LIKE ME THIS IS STEP BY STEP
1. First, install Rootsh v1.5 download it here http://maemo.org/downloads/product/Maemo5/rootsh/
or http://maemo.org/downloads/product/Ma... to enable root access on X Terminal.
2. Open X Terminal on the Nokia N900 (ITS IN THE APPLICATION MENU PAGE 2)
type sudo gainroot and press enter. (This will not work if you skip the first step)
3. Ok now type cd MyDocs/TheNameOfTheFolder
(include the path name of the folder you made if you made a new folder.
I made a folder and called it a) this what I had to type cd MyDocs/a and press enter
4. Ok stop while running X Terminal open the File Manger to make sure your .deb file is where
you said it was and rename it to ussdpad
5. Then go back to X Terminal type dpkg -i ussdpad.deb and press enter
ok you are done go to (APPLICATION MENU PAGE 2) you should see ussd pad
ALL THANKS TO belialshoxley FOR HIS HELP WITH THIS. NOKIA SHOULD HAVE A FIX FOR THIS SOON I HOPE.
Similar Messages
-
A problem when you delete a Facebook account
Hello
I have a problem in the iPad application in Facebook When you delete my account of the settings can not delete the accountPressing delete account in the Settings app on your iPad, it does not delete the FaceBook account only it removes its data from your iPad.
-
Problem when I switch between my account to other account
I have upgraded my iMAC9,1 from Snow Leopard to Mavericks yesterday.
the upgrade didn't show any errors.
on my mac I have two accounts, that I made several years ago under Triger, and untill yesterday I could switch betwen the two accounts immediatly from the menu bar.
Yestarday, after the upgrade I used my account to check the programs and the mail account: all looks fine.
After I tried to switch to the second account ....but.... the system didn't made any swith. Then I tried to logout but the system have showed me a grey screen without any promt or words... it stay so for two (2) hours... I had turn it off.
today the problem appened again....
I would appreciate it very much if someone could help me.
thank you
gricolombUnfortunally,
The problem is still there!
In these days my iMac has failed to change the user accounts.
In particular seams that the frozen appen After that the system has been wakened up from the "stop".
Can anyone help me?
Gricolomb -
HT1549 permission problem when using a sharing only account
I'm using Mavericks 10.9.1
After setup a sharing only account, when using the account login and copy files to a remote shared folder, the remote shared folder's owner do not have permission to read it. only the sharing account has permission.
what's wrong?
I need them have permission to read and write too.
anyone know how to fix it?
ThanksTry using Get Info (command - I) to set the permissions in to read/write for 'everyone'.
-
To Belialhoxley and other advisors re problem when...
: Problem when dialing *166# to check account balance[ Edited ]
Hello,
I followed your instructions and constantly got the message: Unable to download...application package not found.
How do I need to proceed to also be able to check account by using the above-mentioned codes? Would appreciate your help.
06-Feb-2010 08:04 AM - last edited on 06-Feb-2010 08:08 AM
THIS IS A UPDATE 1B WAS ADDED TO HELP OUT
1. First, install Rootsh v1.5 download it here http://maemo.org/downloads/product/Maemo5/rootsh/
or http://maemo.org/downloads/product/Ma... to enable root access on X Terminal.
1B. download -->.deb file) put it in a folder name the folder a
2. Open X Terminal on the Nokia N900 (ITS IN THE APPLICATION MENU PAGE 2)
type sudo gainroot (Just like that) and press enter. (This will not work if you skip the first step)
3. Ok now type cd MyDocs/TheNameOfTheFolder
(include the path name of the folder you made if you made a new folder.
I made a folder and called it a) this what I had to type cd MyDocs/a (Just like that)
and press enter
4. Ok stop while running X Terminal open the File Manger to make sure your .deb file is where
you said it was and rename it to ussdpad (Just like that)
5. Then go back to X Terminal type dpkg -i ussdpad.deb (Just like that) and press enter
ok you are done go to (APPLICATION MENU PAGE 2) you should see ussd pad
Solved!
Go to Solution.After reading the messages of 15 year old Belialhoxley and others with the possible solution, we tried it step for step, to no avail. Our phone kept sending the message: Application not found. Apparently because there was no connection with the Maemo server. Today we got the connection, we tried again but no succes again. Then my partner discovered that to use the ussd pad you need to download three files from: https://garage.maemo.org/projects/ussd-widget
You need to download the following .debs files:
ussd-common
pexpect and ussd-pad
After downloading these files we kept getting the message that "Python 2.5" was missing. My partner discovered once again that Python 2.5 was used in games to be downloaded via Maemo. After downloading some of these games, it was easier to install the application. Because they had the component of the Python 2.5
Conclusion: if you do not have any computer knowledge, better not buy the Nokia N900! And if you have already bought it like myself, keep your partner in a very good mood every day! You yourself won't be able to do a lot with your beautiful N900. -
Since I updated to ios 7.1.1, I cannot check my balance and top up credit to my account anymore.. when i tried to check the balance (*121# my carriere balance number)dial its turning into calling mode instead of requesting ... the same repeating while i tried to topup my account using paper voucher... so please help me to sort out my problem... thanqq in advance ..
Phone details: iphone 5
Network: IND airtel
ios: 7.1.1...I have this problem to simce upgrading to 7.1.2,
any solutions? -
Project not showing when pulling BP account balance
Hi experts
When my client pulls the account balance report off the BP master data, it sometimes doesn't show which project the relative document was assigned to. If I go into tue document, be it an invoice or journal, it has been assigned a project but on the account balance window, sometimes it doesn't reflect the project. This isn't all the time, but most times.
I have checked that the client isn't adding the project onto the document after the document has been added. I'm not sure why this could be?
Any input would be appreciated....Hi Bradley,
The project will only show for those lines where the underlying journal has the project in the relevant line. For instance by default if you add an invoice with a project selected, the journal will only reflect this project in the line of the revenue account but not the line of the BP. Therefore if you look at the account balance of the BP, there will be no project - if you look at the account balance of the revenue account, the project will be populated.
In your case I guess the journals which were manually added show the project in the BP account balance but invoices don't - since for the manual journals in the BP line the projects are defined by the users, but not in the case of invoices.
I hope it helps.
Regards,
Nat -
Checking Account and help with code ?
Hi all..my computer hung up on me, so I'm not sure if my last post went through. First of all thank you all for helping me out the other day with my question on the Bank Account. It continues :)
I'm trying to work on each class one by one..when I test my Checking Account, it isn't printing out the correct balance. The string method to print this is coming from the Withdrawal class...so I know it has to be somewhere in there but I can't seem to figure out why it isn't totalling the balance...or how to get it too.
Then when I test my MyBank class, it hangs up on line 63..which I could swear I have written correctly. Again I am getting a NullPointerException and I honestly think I have the line of code written right, but I'm guessing I dont.
Any help would be appreciated.
public abstract class BankAccount {
public static final String bankName = "BrianBank";
protected String custName;
protected String pin;
protected Transaction[] history;
private double balance;
private double amt, amount;
private double bal, initBal;
private int transactions;
private final int MAX_HISTORY = 100;
private int acct;
protected BankAccount(String cname, String cpin, double initBal) {
custName = cname;
pin = cpin;
balance = initBal;
history = new Transaction[MAX_HISTORY];
transactions =0;
public double getBalance() {
return balance;
public void withdraw(double amt) {
history [transactions] = new Withdrawal (bal, amt);
balance = bal;
amount = amt;
balance -= amt;
transactions = transactions + 1;
public void deposit(double amt) {
history [transactions] = new Deposit (bal, amt);
balance = bal;
amount = amt;
balance += amt;
transactions = transactions +1;
// abstract method to return account number
public abstract int getAcctNum();
// abstract method to return a summary of transactions as a string
public abstract String getStatement();
public class CheckingAccount extends BankAccount implements IncursFee
private int transactions;
private double balance, initBal, amt;
private static final int NOFEE_WITHDRAWALS = 10;
private static final double TRANSACTION_FEE = 5.00;
public static final String bankName = "iBank";
public static final int STARTING_ACCOUNT_NUMBER = 10000;
private int checkingAccountNumber = STARTING_ACCOUNT_NUMBER;
private static int accountNumberCounter = STARTING_ACCOUNT_NUMBER;
private String custName;
private String pin;
public CheckingAccount (String cname, String cpin, double initBal)
super (cname, cpin, initBal);
custName = cname;
pin = cpin;
balance = initBal;
accountNumberCounter++;
checkingAccountNumber = accountNumberCounter;
//initialize a count of transactions
transactions = 0;
public double getBalance()
return balance;
public void withdraw(double amt)
super.withdraw (amt);
transactions ++;
public void deposit(double amt)
super.deposit (amt);
transactions ++;
public int getAcctNum ()
return checkingAccountNumber;
public String getStatement ()
int i = 0;
String output = "";
while ( i < history.length && history[i] != null )
output += history.toString () + "\n";
i++;
return output;
public void deductFee(double fee)
if (transactions > NOFEE_WITHDRAWALS)
{ fee = TRANSACTION_FEE *(transactions - NOFEE_WITHDRAWALS);
super.withdraw(fee);
balance -=fee;
transactions = 0;
public interface IncursFee {
public abstract void deductFee(double fee);
public abstract class Transaction {
protected double initBal;
protected double tranAmt;
// constructor
protected Transaction(double bal, double amt) {
initBal = bal;
tranAmt = amt;
abstract public String toString();
public class Withdrawal extends Transaction
private double initBal;
private double amount;
private static NumberFormat fmt = NumberFormat.getCurrencyInstance();
public Withdrawal (double bal, double amt)
super (bal, amt);
initBal = bal;
amount = amt;
public String toString ()
return "Balance : " + fmt.format(initBal) + "\n" + "Withdrawal : " + fmt.format(amount);
import java.text.NumberFormat;
public class Deposit extends Transaction
private double initbal, balance;
private double amount;
private static NumberFormat fmt = NumberFormat.getCurrencyInstance();
public Deposit (double bal, double amt)
super (bal, amt);
initbal = bal;
amount = amt;
public String toString ()
return "Balance : " + fmt.format(initbal) + "\n" + "Deposit : " + fmt.format(amount);
public class TestCheckingAcct {
public static void main(String[] args) {
BankAccount b1 = new CheckingAccount("Harry", "1234", 500.0);
System.out.println (b1.getBalance ());
b1.withdraw(1);
b1.withdraw(1);
b1.withdraw(1);
b1.withdraw(1);
b1.withdraw(1);
b1.deposit(50);
b1.withdraw(1);
b1.withdraw(1);
b1.withdraw(1);
b1.withdraw(1);
b1.withdraw(1);
b1.withdraw(1);
b1.withdraw(1);
b1.deposit(10);
b1.withdraw(1);
System.out.println(b1.getStatement());
// This interface specifies the functionality requirements of a bank
public interface Bank {
public abstract int openNewAccount(String customerName, String customerPIN, String accType, double initDepAmount);
public abstract void processWithdrawal(int accNum, String pin, double amount);
// executes a deposit on the specified acct by the amount
public abstract void processDeposit(int accNum, String pin, double amount);
// returns the balance of acct
public abstract double processBalanceInquiry(int accNum, String pin);
// returns summary of transactions
public abstract String processStatementInquiry(int accNum, String pin);
import java.util.ArrayList;
public class MyBank implements Bank
private ArrayList<BankAccount> savAccounts = new ArrayList<BankAccount>(); //dynamically grows
private ArrayList<BankAccount> chkAccounts = new ArrayList<BankAccount>(); //dynamically grows
private SavingsAccount sav;
private CheckingAccount chk;
private int accNum;
private String customerName, customerPIN, accType, pin;
private double initDepAmount, amount, balance;
public int openNewAccount(String customerName, String customerPIN, String accType, double initDepAmount)
this.customerName = customerName;
this.customerPIN = customerPIN;
this.accType = accType;
this.initDepAmount = initDepAmount;
if ( accType.equals("Savings"))
BankAccount savAcct = new SavingsAccount(customerName, customerPIN, initDepAmount);
try
savAccounts.add(savAcct);
catch (ArrayIndexOutOfBoundsException savAccounts)
return savAcct.getAcctNum();
else
CheckingAccount chkAcct = new CheckingAccount(customerName, customerPIN, initDepAmount);
try
chkAccounts.add(chkAcct);
catch (ArrayIndexOutOfBoundsException chkAccounts)
return chkAcct.getAcctNum();
public void processWithdrawal (int accNum, String pin, double amount)
this.accNum = accNum;
this.pin = pin;
this.amount = amount;
if (accNum >10000 && accNum < 20000)
chk.withdraw (amount);
if (accNum >50000 && accNum <60000)
sav.withdraw (amount);
public void processDeposit (int accNum, String pin, double amount)
this.accNum = accNum;
this.pin = pin;
this.amount = amount;
if (accNum >10000 && accNum < 20000)
chk.deposit (amount);
if (accNum >50000 && accNum <60000)
sav.deposit (amount);
public double processBalanceInquiry (int accNum, String pin)
this.accNum = accNum;
this.pin = pin;
this.balance = 0;
if (accNum >10000 && accNum <20000)
balance = chk.getBalance ();
if (accNum >50000 && accNum <60000)
balance = sav.getBalance ();
return balance;
public String processStatementInquiry(int accNum, String pin)
this.accNum = accNum;
this.pin = pin;
this.statement = "";
if (accNum >10000 && accNum <20000)
statement = chk.getStatement ();
if (accNum >50000 && accNum <60000)
statement= sav.getStatement ();
return statement;Here's some quick code review:
public abstract class BankAccount {
public static final String bankName =
me = "BrianBank";
protected String custName;
protected String pin;
protected Transaction[] history;
private double balance;
private double amt, amount;
private double bal, initBal;
private int transactions;// make MAX_HISTORY private static final, too.
private final int MAX_HISTORY = 100;
private int acct;
protected BankAccount(String cname, String cpin,
pin, double initBal) {
custName = cname;
pin = cpin;
balance = initBal;
history = new Transaction[MAX_HISTORY];
transactions =0;
public double getBalance() {
return balance;
public void withdraw(double amt) {
history [transactions] = new Withdrawal (bal, amt);
balance = bal;
amount = amt;
balance -= amt;// ++transactions above would be elegant.
transactions = transactions + 1;
public void deposit(double amt) {
history [transactions] = new Deposit (bal, amt);
balance = bal;
amount = amt;
balance += amt;
transactions = transactions +1;
// abstract method to return account number// why abstract?
public abstract int getAcctNum();
// abstract method to return a summary of
y of transactions as a string// why abstract?
public abstract String getStatement();
public class CheckingAccount extends BankAccount
implements IncursFee
private int transactions;
private double balance, initBal, amt;
private static final int NOFEE_WITHDRAWALS =
WALS = 10;
private static final double TRANSACTION_FEE =
_FEE = 5.00;
public static final String bankName = "iBank";
public static final int STARTING_ACCOUNT_NUMBER
NUMBER = 10000;
private int checkingAccountNumber =
mber = STARTING_ACCOUNT_NUMBER;
private static int accountNumberCounter =
nter = STARTING_ACCOUNT_NUMBER;// BankAccount has a custName attribute; why does CheckingAccount need
// one if it extends BankAccount?
private String custName;
private String pin;
public CheckingAccount (String cname, String
String cpin, double initBal)
super (cname, cpin, initBal);
custName = cname;
pin = cpin;
balance = initBal;
accountNumberCounter++;
checkingAccountNumber =
tNumber = accountNumberCounter;
//initialize a count of transactions
transactions = 0;
// same as BankAccount - why rewrite it?
public double getBalance()
return balance;
// same as BankAccount - why rewrite it?
public void withdraw(double amt)
super.withdraw (amt);
transactions ++;
// same as BankAccount - why rewrite it?
public void deposit(double amt)
super.deposit (amt);
transactions ++;
// same as BankAccount - why rewrite it?
public int getAcctNum ()
return checkingAccountNumber;
public String getStatement ()
int i = 0;
String output = "";
while ( i < history.length && history[i] !=
ory[i] != null )
output += history.toString () + "\n";
i++;
return output;
public void deductFee(double fee)
if (transactions > NOFEE_WITHDRAWALS)
{ fee = TRANSACTION_FEE *(transactions -
ansactions - NOFEE_WITHDRAWALS);
super.withdraw(fee);
balance -=fee;
transactions = 0;
public interface IncursFee {
public abstract void deductFee(double fee);
public abstract class Transaction {
protected double initBal;
protected double tranAmt;
// constructor
// why protected? make it public.
protected Transaction(double bal, double amt) {
initBal = bal;
tranAmt = amt;
abstract public String toString();
public class Withdrawal extends Transaction
private double initBal;
private double amount;
private static NumberFormat fmt =
= NumberFormat.getCurrencyInstance();
public Withdrawal (double bal, double amt)
super (bal, amt);
initBal = bal;
amount = amt;
public String toString ()
return "Balance : " + fmt.format(initBal) + "\n" +
+ "Withdrawal : " + fmt.format(amount);
import java.text.NumberFormat;
public class Deposit extends Transaction
private double initbal, balance;
private double amount;
private static NumberFormat fmt =
= NumberFormat.getCurrencyInstance();
public Deposit (double bal, double amt)
super (bal, amt);
initbal = bal;
amount = amt;
public String toString ()
return "Balance : " + fmt.format(initbal) + "\n" +
+ "Deposit : " + fmt.format(amount);
public class TestCheckingAcct {
public static void main(String[] args) {
BankAccount b1 = new CheckingAccount("Harry",
, "1234", 500.0);
System.out.println (b1.getBalance ());
b1.withdraw(1);
b1.withdraw(1);
b1.withdraw(1);
b1.withdraw(1);
b1.withdraw(1);
b1.deposit(50);
b1.withdraw(1);
b1.withdraw(1);
b1.withdraw(1);
b1.withdraw(1);
b1.withdraw(1);
b1.withdraw(1);
b1.withdraw(1);
b1.deposit(10);
b1.withdraw(1);
System.out.println(b1.getStatement());
// This interface specifies the functionality
requirements of a bank
public interface Bank {
public abstract int openNewAccount(String
String customerName, String customerPIN, String
accType, double initDepAmount);
public abstract void processWithdrawal(int
(int accNum, String pin, double amount);
// executes a deposit on the specified acct by
t by the amount
public abstract void processDeposit(int accNum,
Num, String pin, double amount);
// returns the balance of acct
public abstract double processBalanceInquiry(int
(int accNum, String pin);
// returns summary of transactions
public abstract String
ring processStatementInquiry(int accNum, String
pin);
import java.util.ArrayList;
public class MyBank implements Bank
private ArrayList<BankAccount> savAccounts =
unts = new ArrayList<BankAccount>(); //dynamically
grows
private ArrayList<BankAccount> chkAccounts =
unts = new ArrayList<BankAccount>(); //dynamically
grows
private SavingsAccount sav;
private CheckingAccount chk;
private int accNum;
private String customerName, customerPIN,
erPIN, accType, pin;
private double initDepAmount, amount, balance;
public int openNewAccount(String customerName,
erName, String customerPIN, String accType, double
initDepAmount)
this.customerName = customerName;
this.customerPIN = customerPIN;
this.accType = accType;
this.initDepAmount = initDepAmount;
if ( accType.equals("Savings"))
BankAccount savAcct = new
vAcct = new SavingsAccount(customerName, customerPIN,
initDepAmount);
try
savAccounts.add(savAcct);
catch (ArrayIndexOutOfBoundsException
Exception savAccounts)
return savAcct.getAcctNum();
else
CheckingAccount chkAcct = new
hkAcct = new CheckingAccount(customerName,
customerPIN, initDepAmount);
try
chkAccounts.add(chkAcct);
catch (ArrayIndexOutOfBoundsException
Exception chkAccounts)
return chkAcct.getAcctNum();
public void processWithdrawal (int accNum,
accNum, String pin, double amount)
this.accNum = accNum;
this.pin = pin;
this.amount = amount;
if (accNum >10000 && accNum < 20000)
chk.withdraw (amount);
if (accNum >50000 && accNum <60000)
sav.withdraw (amount);
public void processDeposit (int accNum, String
String pin, double amount)
this.accNum = accNum;
this.pin = pin;
this.amount = amount;
if (accNum >10000 && accNum < 20000)
chk.deposit (amount);
if (accNum >50000 && accNum <60000)
sav.deposit (amount);
public double processBalanceInquiry (int accNum,
String pin)
this.accNum = accNum;
this.pin = pin;
this.balance = 0;
if (accNum >10000 && accNum <20000)
balance = chk.getBalance ();
if (accNum >50000 && accNum <60000)
balance = sav.getBalance ();
return balance;
public String processStatementInquiry(int accNum,
m, String pin)
this.accNum = accNum;
this.pin = pin;
this.statement = "";
if (accNum >10000 && accNum <20000)
statement = chk.getStatement ();
if (accNum >50000 && accNum <60000)
statement= sav.getStatement ();
return statement;
Very bad style with those brace placements. Pick a style and stick with it. Consistency is the key.
Your code isn't very readable.
You don't have a SavingsAccount here anywhere, even though your MyBank uses one.
You use JDK 1.5 generics yet you've got ArrayList as the static type on those declarations. Better to use the interface type List as the compile time type on the LHS.
You have a lot of compile time problems, and some incomprehensible stuff, but I was able to change it enough to my TestCheckingAcct run to completion. No NPE exceptions.
I'm not sure I agree with your design.
No SavingsAccount. The accounts I have ALL incur fees - no need for a special interface there. Savings accounts are usually interest bearing. That's the way they behave differently from checking accounts. Where do you have that?
You rewrite too much code. If you put behavior in the abstract BankingAccount class (a good idea), the whole idea is that concrete classes that extend BankingAccount don't need to overload any methods whose default behavior is correct for them.
I don't know that I'd have separate Deposit and Withdrawal to implement Transaction. I'd make Transaction concrete and have starting balance, ending balance, and a transaction type String (e.g., "DEPOSIT", "WITHDRAWAL")
It'd be good to see some thought put into exception handling. I don't see an OverdrawnException anywhere. Seems appropriate.
No transfer methods from one account to another. I often do that with my bank.
That's enough to get started. -
Hi All,
We transferred all the GL account balances to the new fiscal year 2008 by way of running year end program.
Now our auditor wants to see the GL account balance on 31 .12. 2007 as well as on 01.01.2008. The users have also posted some transactions from 01 Jan onwards.
Now my concern is how to get all the GL account balances on 01 Jan 2008.
Because when we run the GL account balances report for the period 01, it shows all the values including the posted transactions during this period. But our auditor wants the General Ledger Account balances on the beginning of the year 01.01.2008.
I request you to all, please give your valuable reply.
Thanks with regards,
Ran.Hi Padma
Thank you for your information and as I know that when you use the T.code: FS10N, you can get the account balance for the selected GL accounts only. This is not my requirement.
How do we see the balance as on date DD/MM/YYYY. Because our Auditor wants to see the account balance as on 31-12-2007 and at the same time 01-01-2008.
How do I ge the report for this purpose.
Please let me know.
Thanks with regards,
Ran -
i get this problem when dialing a number. i can`t hear the other phone ringing or the person talking but they can hear me saying "hello" sometimes i also can`t hear messages that are sent to me(email,text) that contain music or speech. sometimes this problem goes away if i activate voice dialing. any ideas ? i brought it back to where i bought it and they had no idea what was wrong.
Go into your Phone icon, from there display the menu and go into Options, then General Options. Try setting the default call volume to 100%. Also during a call if you hit the "Volume Up" button to increase the volume if you set the above percentage to something lower
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution. -
Why does dialing *100# (to check prepaid account balance) work from dialer but not from contacts?
Hello,
to check my prepaid account balance, I can dial *100# and my carrier sends me back a message with the balance information. I used to save this number under my contacts in my "feature phone" and it worked great.
With the ZTE Open from Movistar (Spain), dialing the number from the dialer works, I get the requested message. However, when I save this number under my contacts and I dial it from there, I don't get the requested message.
From the dialer, it doesn't really dial but sends information to the carrier which sends information back. From within the contacts, it seems to be treated as a phone number which is not recognized, and I get some sort of busy tone back.
Can this be settled in some way? This would be very convenient! I guess this is true for the complete target group of FFOS.
CheersGoing through contacts would probably take just as long as Dialing, But in this case i think it is to do with your Service Provider not the phone itself.
Remember Mozilla only make the OS it is probably your Provider that is making it do that. -
E52: speed-dial for account balance
My Service-Provider (blau.de) sends me my account balance if I call the *100#. I've done a link to speed-dial button 9. After pressing the button 9, I get a short message that an SMS with the account balance information will be send to me. So far, so good. If I close this informational display the quick access keys do not appear. I get only a monochrome background. Neither my background image nor my quick access configuration are to be seen. Pressing the hang up key does not help. I have to press any number on the keyboard and then the hang up key. After that procedure my usual background appears again (image and quick access). If I call the *100# from contact menu everything is fine. It seems that an overlaying windows is not going to be closed by using the speed dial key. This is for me clearly a software (firmware) bug and very annoying. Formerly I used a E51 without such behavior. I updated to the newest firmware (which was a disaster) and the problem still remains.
Some statements to the firmware update. What the hell is this? I need a whole day to do this successfully. And believe me, I'm a computer scientist and I know what I'm doing. Neither NSU 2.5.4 nor Nokia Ovi Suite 2.1.0.87 are working as firmware updater on Windows 7 (32 and 64 bit! Windows 7 uses Windows Media Player 12 and his mtp driver seems to be incompatible with the E52 as with many other Nokia devices. I tried Windows Vista 32 bit without success. No mtp support for my Nokia. How can this be? The only thing that worked was Windows XP with Windows Media Player 10. Believe me, we have year 2010! It is impossible to do the firmware upgrade with Windows XP in a virtual machine due to some USB reconnections. I had install a new Windows XP native on a hdd, for a simple firmware upgrade. I think this can't be true, especially when the bug still remains. When will Nokia reaches the present?
So hope you understand my frustration and try to evaluate this bug. Please don't say: go to your dealer. He can't help this is a firmware bug. My actual firmware version is 013.012. If you want I can send you a video of this behavior.
jarau_deHello,
I had posted about this error in September itself when i bought the phone. Even after two firmware updates this is not solved.
Also i had detailed a list of bugs and posted. Even after this update, nothing has been rectified. I dont know what only Nokia is putting in 150MB.
People first want thier phones to function correctly instead of Internet radio and such stuff.
I no longer use nokia.
/t5/Eseries-Devices-and/E52-Product-code-0578077-Defects-still-not-rectified-after/m-p/571707#M52605
5110->1100->6100->3230->6233->6681->N72->N73->5800->(With E52 I am done with Nokia) -
GL Account Balance Display Problem
Hi SAP Gurus
I am having the problem with the GL Account display.
When I use the T.Code:FS10N to display the balance of the particular GL Account
the total shows one balance and if I go through Line item, it shows different amount.
I request you to kindly reply to me why this difference occurs and due to what reason?
Thanks with regards,
Bala.Dear Bala,
You can check the data (GL Account Balance) in database table GLT0 or write a query or report with logical datbase SDF and structures SKC1A / SKC1C
Try to analyse if the the difference is in differnet currencies or different business areas.
What report are you using for line item.
RFSUSA00, RFSOPO00, or RFSSLD00.
Also, visit the following thread:
Problem regarding difference in FS10N and FBL3N
Hope this will help.
Regards,
Naveen. -
When I attempted to check the monthly statement for my credit card account and clicked on "See statement", the next screen that appeared, which was labeled Online Statement", was blank. In the past, I have never had any problems with this. When I checked with the bank that issued the credit card, the representative I spoke with said that it was a browser issue and that, since I was working on a Mac, I should try using Safari. When I switched to Safari, I had no problem bringing up my statement. But I would prefer to be able to use Firefox to obtain information like this, since it's the browser I always use.
Can you upgrade your browser to Firefox 12 and check?
* getfirefox.com -
Dear Mr./Mrs.,
I had an iPhone 4 , then I bought iPhone 5s , I faced a problem when I started installing any new application other than I already had on my iCloud , I was asked to enter my password of my apple account and I entered it correctly , then I was asked to answer two questions , but I forgot the answers !! I click on forgot the answers , they send me check your email , I check my email and they send me the password that I have already entered not the answers of the questions ! How can this problem be solved ?! Hope to take my message into consideration.
Yours sincerely,
Hesham.Welcome to the user to User Technical Support Forum provided by Apple.
For your issue...
See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
Or Email Here > Apple Support iTunes Store Contact
Maybe you are looking for
-
Using Flash/Actionscript to create PDF Portfolio Navigator
Hi Guys We've been using Acrobat Pro Extended to create PDF Portfolio's for a wee while now, and now in order to create a 'fresh look', my boss is wanting to create custom navigators. As the programmer of the team, I've looked into it and found out t
-
Javascript is not called in jsp page
Hi, I have jsp page which actually redirect to another jsp page.... I need to run some javascript code before redirecting to another page But it seems script got skipped & it goes to desired page code snippet: <%@ taglib uri="/ABCTaglib" prefix="AA"
-
Target Disc Mode to copy library
Can someone explain how to use the Target Disc Mode to copy a iphoto library complete from one computer to another to another computer. I plan to use fire wire 8oo. The library is 30 GB (6000 pics) It would be Great if it were step by step, I still
-
Any tips on how to do the above , thanks
-
Generic Host Process failure on battery boot
When I boot on battery 'DEP'(data execution prevention) closes the Generic Host Process for Win32 Services. I had a blue screen first but changed the gv3.sys driver from the Intel Pentium M processor to intelppm.sys. I'm not having the blue screen an