Problem when doing extraction

hi all
I was doing extractions.
And in the monitor scren it says" External format" error 0MATERIAL IS IN EXTERNAL format?
what this exactly please tell what is this regarding
please let me know asap plz
thanx

hi,
if not solved, try to take a look this long thread
master data loading error(urgent)
(not mark as solved but many possible solutions proposed are there)
hope this helps.

Similar Messages

I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5. I am receiving an error problem when doing the following - I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive whe

Hi, I am having a little trouble with exporting images to another drive and Catalogue and need some help if anyone can give me some advice
I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5.
I am receiving an error problem when doing the following -
I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive where a Lightroom Catalogue has been created. In this Catalogue I have arranged for the images once exported to be moved to a different folder - I used the Auto Import process under the File dialogue box.
When processing the Export I receive an error message for each of the images being exported indicating the following -
Heading Import Results
Some import operations were not performed
Could not move a file to requested location. (1)
then a description of the image with file name
Box Save As Box OK
If I click the OK button to each image I can then go to the other Catalogue and all images are then transferred to the file as required.
To click the OK button each time is time consuming, possibly I have missed an action or maybe you can advise an alternative method to save the time in actioning this process.
Thanks if you can can help out.

Thank You, but this is a gong show. Why is something that is so important to us all so very, very difficult to do?

Problems when doing heap dumps

Hirt,
Thanks for your help. With the changes you suggested it is now working with jmx authentication as well.
However i had another question. I can not make JFlow work. I did install the plugin and everytime i right click on my remote JVM tab and click on Heap Dump, it does open system popup for me to select where to save the dump. But as soon as i select and click OK, it throws this error
Problems when doing Heap Dump for JOverflow analysis
Problems when doing Heap Dump for JOverflow analysis

Hi there!
There can be multiple different reasons for this that I can think of, incorrect permissions granted to the user, the effective user of the Java process running Mission Control not having write permissions in the folder you are trying to save to etc.
What does it say if you run with the debug flags?
http://hirt.se/blog/?p=281
Kind regards,
Marcus

A namespace problem when doing Create InfoArea in bw system

Dear all,
we met a problem when excute a process in our bw system:
our process as follow:
rsa1(Data Warehousing Workbench:Modeling) --> InfoProvider --> Create InfoArea
then a error message window came out as below.
error in object editing
No valid change license available for n
/BPR3R/
Choose 'Display object' or 'Cancel'.
its detail message is as follow:
Message no. TO127
Diagnosis
You cannot edit the object AREA 0INDUSTRIES. This may be due to the following reasons:
The corresponding namespace /BPR3R/ is not entered in the namespace table with a valid change license.
In the namespace table there is no entry with a valid change license that matches the template /BPR3R/.
System Response
The function terminates.
Procedure
Check the name of the object AREA 0INDUSTRIES. If necessary, choose another object name.
Otherwise, let the system administrator check the change licenses of the namespaces in your SAP system.
Maintain the namespaces in the Tools of the Transport Organizer under Administration -> Display/Change Namespaces.
You need to check and correct the entries that match the template /BPR3R/.
You need to distinguish between the following cases:
The namespace is /0SAP/:
Make sure that the namespace role is C (recipient) and the flags SSCR popup and SAP standard are activated. The license fields remain empty.
You did not create the namespace yourself. Instead, the namespace owner is SAP or another software vendor.
Make sure that the namespace role is C (recipient). The field Repair license must either contain the valid license, or the flag SSCR popup must be activated. Contact the namespace owner and ask what you should now do, and what the valid repair license is.
You are the namespace owner:
Proceed according to the documentation on applying for and setting up namespaces. If the namespace role is P (producer) then you need a valid development license. For information on this, see the SAP Library under BC - Basis Components -> Change and Transport System -> BC - Namespaces and Naming Conventions -> Reservation of Namespaces).
Then we did the below action:
se06 --> system change option
in this view, we found /BPR3R/ this Prefix.
And it is empty in /BPR3R/ 's namespace/name range volume.
What is next action we should take to solve this problem?
Anyone experienced or expert,
Please kindly give advice.
Regards,
Allen

Hello Allen,
Cold you please check the following notes which explain about this namespace creation and transport ?
401778 - Using namespaces to develop individual BW objects
150451 - Setting up development namespaces
105132 - Reserving namespaces
150451 - Setting up development namespaces
Best regards,
Rafa

How to solve crash problem when doing "package" with Indesign CS 5.5?

Hello everyone,
I've been having trouble with Indesign CS 5.5 when I use the package tool.
I work with indesign for a long time, create my document files, and when everything is done, finished, i go and do the Package.
But at a certain point it crashes and the file becomes demaged... even the original one i've worked initially!!
This happens everytime...
Does anyone ever had this problem?
Need your help guys?
Thanks

This is not normal behavior. I wonder what is different for you.
If you deselect "Check Links Before Opening Document," you should not be prompted to "Do not Update Links." This suggest you have corrupt preferences. So try:
Trash, Replace, Reset, or Restore the application Preferences: http://forums.adobe.com/thread/526990

[no replies since 2days] problem when doing line total in matrix?

hi everyone...
i have a user form in which ihave a matrix with few columns and for a particular column there is CFL...when i select a CFL my matrix is feeding with data in other columns as well.....
in my form there is a edit box called Tax...in to which iam supposed to calculate the line total of a column in my matrix... as soon as when i enter CFL....
here is the code which i have written in item event
oMatrix2.FlushToDataSource()
oDBDataSource6.SetValue("U_Tax", pVal.Row - 1, oCFLEvent.SelectedObjects.GetValue(0, 0))
oDBDataSource6.SetValue("U_Tax_Amount", pVal.Row - 1, oCFLEvent.SelectedObjects.GetValue(2, 0))
oMatrix2.LoadFromDataSource()
oMatrix2.Columns.Item("V_7").Cells.Item(pVal.Row).Click(SAPbouiCOM.BoCellClickType.ct_Regular)
''for Tax
taxTotal = oForm.Items.Item("33").Specific.value
taxAmount = oMatrix2.Columns.Item("V_7").Cells.Item(pVal.Row).Specific.value
tax = taxTotal + taxAmount
oForm.Items.Item("33").Specific.value = tax
'' end for Tax
the above is code is working perfect...but,
there are 2 problems....
1. if i remove "oMatrix2.Columns.Item("V_7").Cells.Item(pVal.Row).Click(SAPbouiCOM.BoCellClickType.ct_Regular)" line from my code there is an error called
" Application has a problem. Diagnostic file C:
some path..dump was created...plz attach the file...etc etc..."
2. in my matrix column if i re-enter any other CFL data...my Tax is adding again with same value again...i.e i'm not getting the correct line total...
plz provide me the solution for both the questions...
thanks in advance
Edited by: Shenaz Sultana on Jan 7, 2010 12:29 PM

Hi,
For your 1st question, y should you remove that line? If it works fine with that line, leave it as it is. Its afterall placing the focus in that column right?
w.r.t your 2nd question, the reason why the same value is being considered for tax calculation is that, the same old datasource is not cleared. So you clear the datasource manually and this problem will be solved.
Eg: Try to clear the data source as below.
oForm.DataSources.DBDataSources.Item("@Table_Name").Clear();
Hope this helps.
Regards,
Satish.

Problems when doing a mirrored display

Hello there. I recently got a KVM switch to use for an iMac g3 and an intel mini. The intel mini works perfectly with it, and the imac does kinda. It should be noted that the iMac is running Mac OS9.2.2. I have both computers hooked up to a 17in lcd and a usb cable in each to switch the keyboard,mouse and printer. Ever since I hooked up an lcd to the imac and the kvm swich with its usb ports, the imac has been crashing constently with bombs and wierd messages. Any suggestions? Thanks

What do the messages say when it crashes?
From what I understand about using external monitors (which isn't much), LCD monitors have a native resolution that is not changeable, unlike CRT monitors. iMac G3s are only capable of going up to a maximum of 1024 x 768 resolution. I don't know what the native resolution of your LCD monitor is or what would happen if you attempted to connect a higher resolution LCD monitor to an iMac running OS 9.2.2. Then there is the possibility that the KVM switch isn't playing nice with OS 9.2.2.

Problem when doing update and commit at the same time...

I want to "fusion" the update and commit event... I thought that if I added a jbo:Commit at the end of the update event,
it would work. But, I get back an error message when running, and since this time, I can throw my project to trash:
even if I get back to the previous version of my project ( the one that used to work ), I still have the message. The only
solution for me is to shut down Jdeveloper, send to trashbin the project and to get back it from a saved backup...
Has someone a way to fix it, please ?
Regards,
David

Hi David,
Could you please provide more details:
1. What error message do you receive when running? Can you provide a stacktrace?
2. What does the corrupt JSP page look like? Can you include the source for the page in your post?
3. What error message(s) does the IDE provide when you try to reopen the project?
Thanks,
JR

Timing problem when doing hourly rate

Note:
There are two problems:
1)Usually each passed test takes more than 1 minute, thus incrementing Track no. But what if the 2nd failed test completes in less than 1 minute, track no cannot be incremented, leading to wrong result in hourly rate.
2) For hourly rate, it needs to be calculated after each hour. The problem if the test lapses more than one minute, the same minute skips,
Therefore, hourly rate cannot be calculated at each hour. Using more than or less than function won't work as the hourly rate will be calculated twice or more in each hour.
See the red box in the bloick diagram
See my attached.
I am using Labview 7.1
Pls advise I will grateful to your generous help
Attachments:
timing.vi ‏108 KB

Hi Englund,
Thanks
Ya I know. I am trying to test whether the function is working for my main program and test machine. Sometimes, in case of of failed test, the whole test will take less than 1 minute to complete. For the passed test, of course the teat machine will continue to test on more stages. But when the test fails in first or earlier stages, the track number cannot be incremented.
What's more I want the to calculate the hourly rate, so if it misses 60 minute mark, Hourly rate won't be calculated. I can use the equal sign but the minute tracker cannot possibly detect every minute becos the test takes 1 minute, more or less, missing the mark.
I have checked the function (wait until next ms multiple) as u suggest and found that this is not function I am looking for.
If you think that I missed out. Maybe post your small example on how it works.
Clement

Problem when doing PGI

Thisis what the message I get when i do the PGI
" Status of inspection lot 02000023984/partial lot 0000 does not allow goods issue "
what has to be done now

Hi,
Status of inspection lot 02000023984/partial lot 0000 does not allow goods issue "
Pre inspection is activated please consult you QM consultant to clear the lot which i spending for inspection ..,if you dont have a Qm consulatnt and trying out something new then go to,Inspection lot selection QA32 input the variables and execute .
Regards

Problem when doing fcc and configuring file adapter

Hi all,
I have done all my xi work in my interface task -design IR, mapping, ID.I aslo passed succesfully XML testing.Now I am going to use 2 file adapters to complete the task..
I am having problems configuring content conversions parameters in receiver.
..I want to be able to pass a text file to input and output again text file.
If someone can help me I can provide screenshots .Appreciate your help..
Thanks

Hi,
File Content Conversions
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter - FCC
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns - FCC
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file - FCC
/people/shabarish.vijayakumar/blog/2006/04/03/xi-in-the-role-of-a-ftp - FCC
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - FCC
/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter - EOIO - File
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/sap.user72/blog/2005/01/06/how-to-process-csv-data-with-xi-file-adapter
Hope it helps..
Kumar.S

Problem when doing inner join for three tables....

DATA: V3 TYPE VBAP-MAKTL.
SELECT single vbap~matkl into V3
       from VBAP
       inner join VBFA
       inner join LIPS
          on LIPSPOSNR = VBFAPOSNN
          and vbapvbeln = vbfavbelv
           and vbapposnr = vbfaposnv
             where LIPSVBELN = VBFAVBELN = '0080000834'
             and vbfa~vbtyp_n = 'J'
             and LIPS~J_3ASIZE = '0884'.
Error: Wrong expression "INNER" in from clause...

Hello Tushar,
Why you are using the 3 table inner join. If the volume of data is big then this statement will give to time out. Use "for all entries" statement to select the data from the table.
Like
select field1 field2 from LIPS into i_lips
    where LIPS~J_3ASIZE = '0884'.
select f3 f4 from vbfa into i_vbfa for all entries in i_lips where field1 = i_lips-field1 and so on
and
use same to select data from VBAP.
Hope this will help

When doing my Yahoo email, I continuosly get a message to sign in again. Yahoo claims it isn't their problem, and says it's a problem with Mozilla.

The request to sign into Yahoo again appears every few minutes, sometimes every few seconds, while in Yahoo email. Yahoo gave me some suggestions that did not rectify the situation and referred me to Mozilla. In the meantime, I changed my default browser. I would rather stay with Mozilla. What can I do?

May I ask you another question? I have another problem when doing Yahoo email while in Mozilla Firefox. The size of the font continually changes while I'm typing an email, especially if it is a reply. Also, if I type in an email address in the body of my email, the following words are underlined despite my efforts to unclick the "underline" command, and they are blue like the email address, once again despite my effort to change the font color. The screen is very jerky, too.
Any ideas?
cathy.dugan2

Strange issue encountered when doing costing run

Dear experts,
I encountered a strange problem when doing costign run use CK40N.
I created a costing run on 23.12.2010 In the costing run the validity was set from 01.01.2011 to 31.12.2011, I did all the steps except release, all steps were done successfully
I released costing run on 01.01.2011, but when I hit a material to check the costing date, found the costing was only avaliable to 31.01.2011 not 31.12.2011.
I was wondering if any actions or modifications done will affact on the costing date of material?
Have you ever meet this problems?
Please give me some help.
Thanks for your time and concern.
Regards,
Anna

Hi Sarada & ajay
Thanks for your comment.
The most strange thing is...
When I display costing run, the valid to date is 31.12.2011, but in material, it shows 31.01.2011....
I did test again, to change the valid to date in CK40N of the costing run, but the result is, date in material alway the same with what displayed in costing run in T-code CK40N.
One more information, we usually do costing run per month, and we just change to valid date to end of year from 2011.
At first I thought it might have some relation with modifications to costing variant, but after doing test, the modifications will not affect.
The valid date in material should always be the same with what displayed in costing run.
And after the first step 'Selection' in costing run, the date will not be changed.
So I could not come out with any idea with issue......

What does "extracted channel PDF" mean and why does it continually duplicate on my desktop? I think it happens when I move a file in Finder to another file and when I copy some web files. How do I avoid this on my Mac (Mavericks)? Thanks for your help!

What does "extracted channel PDF" mean and why does it continually duplicate on my desktop? I think it happens when I move a file in Finder to another file and when I copy some web files. I have to immediately move to trash all the duplications on my desktop. How do I avoid this on my Mac (Mavericks)? Thanks for your help!

What application is set to open PDF files? If you CNTRL click on the file and open with Preview does the problem occur?
If not change the default application to open PDF files to Preview.
You can do this by highlighting the file and either use CMD i or Get Info , this will open a window with the info on the file with an option to change the application that opens the file.
That's all I can think of.

Problem when doing extraction

Similar Messages

Maybe you are looking for