Problem when doing update and commit at the same time...

I want to "fusion" the update and commit event... I thought that if I added a jbo:Commit at the end of the update event,
it would work. But, I get back an error message when running, and since this time, I can throw my project to trash:
even if I get back to the previous version of my project ( the one that used to work ), I still have the message. The only
solution for me is to shut down Jdeveloper, send to trashbin the project and to get back it from a saved backup...
Has someone a way to fix it, please ?
Regards,
David

Hi David,
Could you please provide more details:
1. What error message do you receive when running? Can you provide a stacktrace?
2. What does the corrupt JSP page look like? Can you include the source for the page in your post?
3. What error message(s) does the IDE provide when you try to reopen the project?
Thanks,
JR

Similar Messages

IPhone 4s , when I call and charging at the same time, I felt like been shocked when my ear close to the phone?

iPhone 4s , when I call and charging at the same time, I felt like been shocked when my ear close to the phone?

Talk to your email provider. They control their servers and what happens to your email.

Counter output 2V when using gate and source at the same time..

I'm using NI TIO-6601.
I connected output of counter_0 to pfi 34 and pfi27 on hardware(CB-68LP).
pfi 34 is used for gate to counter_1 and counter_2.
With this gate, counter_1 and counter_2 generate pulse trains when the gate is in high state.
pfi 27 is used for source to counter_3.
With this source, I'm trying to let counter_3 count event on counter_0.
However, after this connection, the voltage from counter_0 is about 2V measured by Oscilloscope.
Also, counter_3 cannot count the event on counter_0.
Is there any problem on my connection ? or any tips for solving this problem??
Thanks in advance!!
p.s. It works when only two counters are working.
for example, when counter_0 generates pulse tra
in and output is connected to pfi_27, then counter_3 can count the event on counter_0.
Thanks again!

Hello,
Thank you for contacting National Instruments.
This issue may be related to amount of current the output of counter 0 can produce. You may want to try a different method for making these connections. Try routing your counter 0 output on to RTSI line 1. Then use RTSI1 as the gate for counters 1 and 2 and the source for counter 3. This way, you will not need to use two seperate PFI connections.
If you are using Trad. DAQ and LabVIEW you will need to use the Route Signal.vi. If you are using DAQmx, you will need to use the Export Signal.vi
Regards,
Bill B
Applications Engineer
National Instruments

Running RIPv2 and OSPF at the same time

What are the problems with running RIPv2 and OSPF at the same time if any? I have the gear capable of that and I have been doing this for over a year now. I wanted to get rid of RIP but my couterpart is scared because he is not OSPF skilled. I do have some remote sites with old 1601s to consider. Any suggestions or recommendations.
Thanks

Hi Friend,
OSPF is far better than RIP when it comes to performance and advatnages compared to RIP and no doubt in that though it is complex to implement compared to RIP but once done it is smooth.
It is important to have a very well designed network with OSPF otherwise the behavior is unpredictable sometimes and it may not give desired results.
Also for your low capability routers like 1601s you can put them into stub or total stubby area so that they may have less load on them.
HTH
Ankur

Problem with audio of my notebook. Audio works through pc speakers and earphones at the same time

Hi all,
thanks in advance for your advices.
I have a problem with my notebook (HP pavilion g6 2305 sl).
The problem is that when I connect my earphones the audio of my pc don't stop, hence I can hear (music, film, ...) both by earphones and speakers at the same time.
I tried to install again the latest driver audio, but nothing was changed.
I tried to use another pair of earphones, but nothing.
I have noted that if I connect the Jack at my pc, but not until the end, the audio stops from the speakers and goes through the earphones, but only if the jack is not completly inserted in the notebook.
I read a lot of forum on the web but I'm not able to find a solution for my problem.
(ps. the problem comes out suddenly, without any signal. I don't have installed any update or new software before the problem's start)

Right click on speaker icon, lower right screen.
Choose playback devices.
Select "speakers and headphones" as your default.
Disable "communications headphones".

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

OK great info!
I found 2 possible ethernet to USB adapters:
By "Plugable": USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
2. Apple USB Ethernet Adapter
Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance. BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
One person commented:
This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
Thanks for any additional comments.
Best regards,
Steve Schulte
Sunday 6 January 2013

Several of us have a iPhone 6s and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

Several of us have a iPhone 6plus and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

Not having the problem, don't personally know anyone who is.

Im worried about the battery percentage while play a game on my iphone 4s.so that,i decided to play a games and charging at the same time.is it problem on my battery ? im to worried.please give a conclusion.

Im too worried about the battery percentage while playing a game on my iphone 4s.so that,i decided to play a games and charging at the same time.im too worried for my battery problem on the future.please give a conclusion.

It is perfectly fine to use the phone while charging it.

Hey dear my i phone locked and stak at the same time i can`t open it how can i solve this problem

hey dear my i phone locked and stak at the same time i can`t open it how can i solve this problem

Try to Reset your device:
Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off option that shows up first).

When i hold down command and r at the same time after restarting it comes up with a

When i hold down command and r at the same time after restarting it comes up with a black screen and a lock symbol and a field bellow where you would input a password, i have tried ALL of my possible passwords including my password i use for the mac and it stil will not work! all that happens is the text i put in bellow erases itself after hiting enter or clicking the arrow.

I've tried my apple ID password and that doesn't work either . I don't recall seting a password for an encrypted disk either :/ if it was for an encrypted disk, would it be in keychain anywhere? if so how can i find it?
Thanks!

I cannot use data and voice at the same time.

I cannot use data and voice at the same time.
I am on Wifi (connected) and at the same time I am on a voice call. when I switch to my RSS feed reader it does not sync it comes out with a message cannot connect to internet, I thought it is a problem with the feed reader application, IE 10 behaves the same I cannot browse when I am on a voice call.
This is a very basic issue, am I missing something? Please help.
My Model is lumia 820 with the latest portico update.
TIA
Sandeep

I am aware that packet data via EDGE and voice cannot happen at the same time, surprisingly when I am on voice call I cannot connect to internet via Wifi too

Lightroom quits when Photoshop CS4 is open at the same time

When I have Lightroom open at the same time as Photoshop CS4 I get the message Lightroom has encountered a problem and has to shut down. I am running the latest version of Lightroom using a PC with XP professional 64 bit. Also occasionally Lightroom reverts back to an old catalogue. Does anyone else have these problems?

Just FYI, Lightroom is not supported on XP 64 bit. This might be one of the reasons why. You might need Vista or 7. I do know many people still run it on XP 64 though.

Charge ipod and listen at the same time?

hi,
i sit at my desk for about 8 hours at work and would like to charge my ipod at my computer via usb and listen at the same time. is this possible? it's a pc computer here at work. and it does not have itunes installed and i don't see having itunes on it as a possibility.
i don't like having to charge it, wait about an hour, then listen for a few hours, then charge it again.
also, do you notice any battery "leakage"? i mean, i have some battery power at night when i turn it off, (yes, i do turn it off b/c the screen goes blank) and then when i get into work and try to turn it on, i get this battery looking thing and have to charge it.
it's possible that the ipod came on while i was walking (it's in my bag), but this happens too often for me to think that it does.

You'll need iTunes if you want to access your iPod and listen through your PC. Also you'll need to set it to manual update, see the articles below.
Using iPod with Multiple computers
Managing Your Songs Manually
When your iPod is in your pocket make sure you have the lock on to disable the controls otherwise it is liable to get switched on and use battery power.

How do i start video and audio at the same time in ios

How do i start video and audio at the same time in ios?
I have tried a lot of different ways but i cant figure it out?
I can get the sound and animation (timeline) to start playing.
There is no problem to start the video and the animation at the same time.
But i cant get both the video and the audio to start playing when i press a button.
It works great in OSX and on windows?
Here is an example:
// insert code for mouse click here
// Play an audio track
sym.$("_1")[0].play();
// Play a video track
sym.$("host")[0].play();
// Play the timeline at a label or specific time. For example:
// sym.play(500); or sym.play("myLabel");
sym.play("marker1");

If the game has sound in it (and possibly even if it doesn't) it may be overriding the Music app and causing it to stop playing - in which case there is nothing that you can do about it.

Updating two tables at the same time

Please,
Does someone have an idea on how to update two tables at the same times?
Thanks a lot in advance

I was thinking about a single session and single update command.
That's why I thougth someone else could have a clue.
Thank you

Problem when doing update and commit at the same time...

Similar Messages

Maybe you are looking for