Problem when Entering Decimal Values at Input Ready Query

Hi Everyone,
I have created Input ready query but when I am going to enter decimal values in input cell it takes as a round of value.
Example:- If I enter 1.234 value at input cell it takes as a 1 or if I enter 1.789 value then it takes as a 2 at cell.
The technical properties of Key Figure at Info object level is,
Radio Button :- Decimal
Drop Down :- FLTP (Floating Point)
But we want to whatever value will enter at input cell, the same value will save at real time info cube level.
Requirement :- If I enter 1.234 value at input cell it needs to take as a 1.234
Please suggest your comments/views.
Thanks
Kind Regards
Anukul

Hi Giradkar,
Check the setting of the UOM you are using in table 'T006' there are 2 fields that indicate how to display and how to store the values with respective UOM.
Regards,
Eitan.

Similar Messages

Is it possible to display default values in input ready query.

Hi Guys,
Is it possible to display default values in input ready query.

HI,
Select the particular Variable.....in the right hand side u will find the default values tab....in that u can give the values...and save...if u run the query then it will show the default values for that Variable.selection....
Thanks/Tarak

How to get Input-Ready Cell Value of Input Ready Query?

Hi,
How to get input ready cell value in fox formula?
for example :
In Input-Ready Query,
C_Code Month Psale(input ready)
1000 05.2012 800
now i want Psale 800 in fox formua before value save in cube,
is it possible?
Thanks
Ravi

Hi,
as I understand your requirement: you want to execute a planning function before 'save'. This possible, cf. note 1356805
for more details.
Regards,
Gregor

How to set input ready query to display mode as default when open workbook?

Dear All,
Hi, i have a question here about IP query.
as my current situation, my workbook included one input ready query, therefore, when i open my workbook which default is Edit mode which mean all value can be edited.
but, i want it to display mode when open workbook, and i already have a edit button, if i want to edit the value i will use Edit button, so, i wan it as display mode when i first open workbook.
so, can anyone tell me how to set it as display mode when open workbook which included input ready query?
Regards
wenlong
Thanks a million

in Data Provide Specfici commad
Edit
Dsiplay
Filter command
Assigen Query /Query view
pls select Edit then save

Wrong cache for input-ready query

Dear Expert,
I encountered some issues about input-ready query. When I first open one input-ready query and input some plan data, I can save the data successfully. But after I saved data for the first query, if I don't re-connect the analyzer and open a new query, usually the plan data in the new query can not be saved successfully. After re-connect the analyzer, it works well. When I debug it, if I do not re-connect analyzer, I found the new query I opened still got some data which belong to the first query (Such as variable value). I guess it probably caused by some Bex cache? (It's not OLAP cache in RSCACHE, as we have disabled the cache for planning query in RSRT).
Could you please help me with this? Is there any way we can disable this kind of cache for the input-ready query? Or if we have any solution to clear this kind of cache without re-connect bex analyzer every time when I open a new input-ready query.
Thank you in advance.
Best Regards,
Fuyang

Hi Fuyang,
We are facing similar problem.
1st problem:
(1) When we run workbook that time variable values are automatically filled up.
(2) Variable values for version, year is filled up and then query output is displaying.
(3) There is no personalization or variant used. Its looks to me Values are coming from Cache.
(4) Cleared RSRCACHE and there is no cache used for this query.
(5) If we enter version = u201CZ2010u201D and Year = u201C2010u201D and after running workbook (input query) and then closing and reopening same variable values are coming. If we change version from u201CZ2010u201D to u201CZ2011u201D and run/save query and again reopening version variable values are coming again to u201CZ2010u201D.
2nd problem:
(1) We have planning sequence which is using below variables.
(2) Version, Year, Plant.
(3) Version and Year is input ready variables
(4) Plant is Userexit variable.
(5) Plant Dropdown is used.
(6)When we execute planning sequence first time without filtering plant then it is working fine. Receiving message u201C100 records read,100 records changedu201D u2013 This is working fine.
(7) When we use plant dropdown and filtering u201CABCu201D plant then planning sequence working fine and receiving message u201C20 records read, 20 records changedu201D u2013 This is working fine.
(8)When we clear drop down/filter using CMD - REMOVE FILTER which is used in button clear plant u201CABCu201D filter. u2013 This is working fine.
(9) Then we again apply planning sequence for all the records and receiving message u201C20 records read, 20 records changedu201D. This is not working. The message should come u201C100 records read,100 records changedu201D
This time plant variable has still with value u201CABCu201D and not clearing in variable cache.
We are on below BI 7 level and above application is Excel based.
SAP_ABA u2013 701-SAPKA70104
SAP_BASIS-701-SAPKB70104
SAP_BW-701-SAPKW70104
BI_CONT-701-SAPK-70403INBICONT
SAP GUI 7.1 patch 17
SAP BI BEx AddOn 7.1 patch 10 (1000)
Any help will be greatly appreciated.
Thanks in advance.

Input ready query input help

Hello gurus,
I have a requisit to have 0COMP_CODE on F4 input help of 0COSTCENTER. I've changed the attributes of char 0COSTCENTER to display this field.
However, when i do F4 on input ready query, this field is not showed. I have to change Value Help Attributes, but this settings is only for user that has changed thos field.
My question is, can i make this settings as standard?
Thanks in advance,
Vitor Ramalho

Dezso,
We looked into using Navigational Attributes in SP7 and found that Input Queries were unable to process them. Unless there has been some specific enhancements I do not believe that anything has changed here.
I recommend raising an OSS and getting clarification from Waldorf. The SAP Help page on input queries in IP also provides some clarification in this respect.
Hope this helps.

Date as keyfigure in Input ready query

Hi Folks,
I have created a input ready query on transactional infocube.
Its working fine and able to input for keyfigures except one keyfigure it is Date Keyfigure.
I just created one more keyfigure with Datatype as Date so that user will able to enter date aswell in input ready query.
but problem here is I have done same changes/enable for the date keyfigure like remaining keyfigures.
in query anylazer i cannot see input enable for the particual date keyfigure.
please let me know what are the steps need to do extra for the particular date keyfigure to make enable for input..
Thanks.

Hi,
Thanks for your response.
if it not happened by IP is there any other option available to update changes in to DSO/Infocube.
one more thing.I have a created one Multiprovider on the transactional DSO then i created query on the multiprovider,but in query designer i cannot change the option to change mode for the keyfigures.its in display mode only.
why it is not enabled.is there anythying missing to do..
Thanks..

Date field in Input ready query

Hi Folks,
I have created a input ready query on transactional infocube.
Its working fine and able to input for keyfigures except one keyfigure it is Date Keyfigure.
I just created one more keyfigure with Datatype as Date so that user will able to enter date aswell in input ready query.
but problem here is I have done same changes/enable for the date keyfigure like remaining keyfigures.
in query anylazer i cannot see input enable for the particual date keyfigure.
please let me know what are the steps need to do extra for the particular date keyfigure to make enable for input..
Thanks.

Hi,
Thanks for your response.
if it not happened by IP is there any other option available to update changes in to DSO/Infocube.
one more thing.I have a created one Multiprovider on the transactional DSO then i created query on the multiprovider,but in query designer i cannot change the option to change mode for the keyfigures.its in display mode only.
why it is not enabled.is there anythying missing to do..
Thanks..

Error in entering a new characteristic value using input ready row in WAD

Hi Guys,
I have created input ready query with input ready row option to enter both characteristic and key figure values. I have created info object without master data tick in Master data/text tab to enter free text which inturn will create a new record in master data. It is working in Bex analyzer, here I can enter any value to create a new entry in the master data but where as in WAD I am getting error message reading invalid values. In WAD I am restricted to choose only available master data entries. Do I miss any settings in WAD. Your help will be highly appreciated.

Hi,
the feature you are requesting is called "Master Data Planning". Unfortunately it is not supported by SAP. Please use the term "master data planning " to search this forum and you will find some threads about this issue.
Hope this helps
Matthias Nutt
SAP Consulting Switzerland

Input ready query input help problem (F4 help)

Dear All,
We are using NW2004s with SP9.
We have created an aggregation level with 0MAT_SALES, 0SALESORG, 0DISTR_CHAN (0SALESORG and 0DISTR_CHAN are compound characteristics of 0MAT_SALES) characteristics (and other char. as well). We have a Filter where we added the above mentioned characteristics and a navigational attribute of 0MAT_SALES (0MAT_SALES_NAV_ATT)
We set the follwing filter values:
0SALESORG = AT01
0DISTR_CHAN = 01
0MAT_SALES_NAV_ATT = P
0MAT_SALES = nothing but we set the 'Can be changed at execution' flag in the modeler.
We have an input ready query on the above mentioned aggregation level. We are using 0MAT_SALES as free characteristic and we set 'Only posted values' on the extended tab.
Our 1. problem is that when we want to enter new rows into the Query and get input help (F4 on the input ready cell) to select 0MAT_SALES we get all 0MAT_SALES values and <u>not</u> only that ones which has 0SALESORG and 0DISTR_CHAN values set in the filter.
Our 2. problem is that 0MAT_SALES_NAV_ATT = P is not taken into consideration during query execution and we also get all materials.
Any help?
Thanks in Advance,
Dezso

Dezso,
We looked into using Navigational Attributes in SP7 and found that Input Queries were unable to process them. Unless there has been some specific enhancements I do not believe that anything has changed here.
I recommend raising an OSS and getting clarification from Waldorf. The SAP Help page on input queries in IP also provides some clarification in this respect.
Hope this helps.

Input Ready Query, Variable read mode setting Only Values for InfoProvider

Hi,
I have a problem with Selection Variable for a BEx Query :
- I'm working with SAP BI 7.0 support package 15
- My query is an input ready query built for an "aggregation level" based on "real time infocube" (Planning);
- Characteristic, I want to filter with variable, has query property Advanced->Query Execution for Filter Value Selection = Only Values in InfoProvider
- Characteristic (info-object) has set the property: Business Explorer tab--> Query Def. Filter Value Selection as Only Values in the info-provider...
My problem is:
when I execute a query,
the Select Values for Variables screen appears
I push on the Select from List button
and Select Values For MyCharacteristic appears...
but it shows me all values in master data table of my characteristic instead of only values in the infoprovider!!!
If I build a query for the Real Time Cube it works correctly, but if the query is built for the aggregation level it doesn't work!
Could someone explain me why it doesn't work correctly?
Thanks in advanced
Fede

Thanks to Mariana Lazar
30.03.2009 - 12:30:36 CET - Risposta by SAP
Dear Fede,
Regarding the query built on aggregation level please note the following
the aggregation level is always a Virtual Provider built other
InfoProvider and hence it does not have the dimension table and hence
the F4 mode D is not supported.
Therefore when aggregation level is used in a query, F4 does not supportD-mode: 'Only Values in InfoProvider' and all master data values are
displayed in the value list.
Reference from the note
984229 F4 modes for input help as of SAP NetWeaver 2004s BI
4. Since other InfoProviders do not have a dimension table, the system
displays only posted values if you select "Only Posted Values for
Navigation". Otherwise, it displays the values from the master data
table.
Hope this should clarify your doubts. Please let me know if you have
questions else please confirm the message at your earliest convenience.
Thank you for your cooperation and kind regards,
@KR@ Mariana Lazar
Senior Support Consultant
SAP Active Global Support
Netweaver Business Warehouse

Input-ready query; Layout dependant on variable value

Hello,
I need to create an input-ready query where I have months Jan-Dec in colums. If the planner gives a variable value for the planning period for example April, he should get a layout where he can plan for April-Dec and view the values for Jan-March. How can I create this kind of input-ready-query? Thanks in advance. Points will be assigned.
Regards,
Marika

Hi Marika,
Step1: You need to create a variable (with user restriction), you can provide fixed values for all months of the year, perhaps on 0CALMONTH. You will get the text displayed when you select the month number in the planning folder where u use it. Say WM1 is the name you gave.
Step2: Create 2 exit variables. 1st one would check the entry by the user from WM1. If the period is > January, store all the months starting from January to the month preceeding to one selected in WM1. Set this as WM2.
In the second exit variable, the code must check for which month user has selected to start planning from and store all months starting from and ending December in it. Set this as WM3. You will have to create these 2 variables on 0CALMONTH again.
Step3: Now, in the Layout builder, 1st screen, for the additional settings, in the data columns tab, select 0CALMONTH for dynamic.
Step4: In the second screen of Layout builder, create 2 rows for the data column settings. First row would be set for comparison. Check dynamic box. Assign WM2 as the variable for 0CALMONTH here.
Second row would be for planning, but check dynamic box here again and assign WM3 as the variable for 0CALMONTH here.
You must be having WM1 as the variable in header.
In the 3rd screen you will find just 2 data columns displayed.
When you run the layout, user prompt will insist you input the desired month and layout on further opening, will bring in the desired data as you require from the Cube.
I hope you have ur actuals and plan data both in the same cube. Else you have to assign separate cubes for plng area in comparison and plan settings in the 2nd screen of builder.
Hope this will help solve ur problem.
Regards,
Aby

Problems with Input Ready Query

Hello All,
I'm facing problems with input ready query for BI IP.
I've created the input query on aggregation level and maintianed all the planning settings. It is not allowing me to edit, when i'm attaching in the web template.
I also attached a button copy function, and i'm able to execute it and save it, but it not allowing me to change manually.
I also enabled the 3rd option for keyfigures...data can be changed with planning functions and user input.
Please help me in this regard.
We have just started the development of BI-IP, please suggest me if there are any notes to be applied.
Regards
Kumar

Hello Johannes,
Yes I've set to the finest granularity...even if it is Only one characteristic and one key figure without any restrictions...
I've checked even planning tab page under properties...it is also fine..
But still it is not allaowing me to go to edit mode...this is a fresh instalation and the query i'm working is the first one...
Please suggest me if there are any notes to be applied, we are on Support Pack 10.
Regards
Jeevan Kumar

Problem with input ready query with structure in Rows

Hi,
First I have created an input ready query without a structure where I have GL accounts in rows and key figures in column. It works and I can see that the cells are ready for input when I launch it in web through query designer.
Later, I am replacing the GL accounts in rows with a structure. Each line in the structure is combination of GL acctUoMChart of Acct (all restrcited to single values). Here comes the issue. When I run the query again (launching thru query designer) it dumps. Any idea?
Also, please let me know whether the planning applications can be made using BEX analyser OR WAD ?
Thanks a lot in advance.
Regards,
SSC
Edited by: sapsem con on Feb 19, 2009 2:38 PM

Hi,
Can you check ST22 for the dump analysis.
Also, planning applications can be built using BEx analyzer or WAD.
Check this link for example and step-by-step procedure to do the same.
http://help.sap.com/saphelp_nw70/helpdata/en/43/a18462c8291d9be10000000a1553f7/frameset.htm
Regards,
Deepti

Problem with compound objects in IP input-ready queries

Hi, gurus!
I have following problem:
In IP input-ready query I have 2 restricted key figures (KF1 and KF2):
KF1 restrictions:
      Char1 = X1
      Char2 = 100
KF2 restrictions:
      Char1 = X2
      Char2 = 100
Char2 is compound with Char1, so KF1 should be restricted as Char2 = X1/100.
That query in example doesn't work, all cells are grey. But, If I'll change restriction of Char2 in any key figures everything will be fine. It looks like the system ignores Char1 restriction. E.g.
KF1 restrictions:
      Char1 = X1
      Char2 = 101
KF2 restrictions:
      Char1 = X2
      Char2 = 100
(Ok)
I think it is some kind of system error, but can't find the related Nota. Maybe somebody already solved the same problem?
Edited by: Mikhail Sychev on Jun 28, 2011 8:54 AM

Hi Mikhail,
This is typical issue with compounded infoobjects.
I can think about 2 solutions.
1) Create a hierarchy on the compounded infoobject and restrict the KFs by hierarchy nodes rather than direct filter values on the infoobject.
2) If not, create an nav attribute on the compunded infoobject, in which you have to concatenate values of both the character values like 'X1100'. You this navigational attribute in the keyfigure filter.
Thanks,
Krishnan

Problem when Entering Decimal Values at Input Ready Query

Similar Messages

Maybe you are looking for