Problem when enterring punctuation in Metadata and Smart Collections

It seems that Lightroom isn't applying the same logic to punctuation enterred in metadata and smart collections. For example:
Create a photo with City set to "D'Hanis". Just type those keys, LR will replace the simple straight appostrophe with a nicer angled one. And yes, there is such a town--I have many relatives from there.
Now create a smart collection matching City is "D'Hanis" (again, just type that from the keyboard). In this case the ' character seems to be left as the plain ASCII version. This also means that the smart collection will not match the metadata.
Workaround is to select a relevant image, select the metadata and copy it to the clipboard (Ctrl-C), and then paste that value into the smart collection dialog box so that the smart collection is truly searching for the value in the metadata.

Hi,
At any case the two headers will not be displayed if you select the both "start of table" and "at page break.". Please check whether there is another widow in the form from where the header is displaying.
Thanks ,
Abhijit

Similar Messages

Strange TableView problem when entering editing mode.

I'm having a problem when entering editing mode in a tableview. What happens is the cell data from the section below is being displayed on top of the last cell in the current section.
The narrower cell, with the plus sign on the left side, is briefly visible before (a copy of) the cell from below covers it up.
Has anyone else seen this behavior? I'm really stumped here.
More info, or how my table isn't standard: Each of the three sections is populated from a list. If the user has previously deleted one of the items from the section, only then is the plus sign shown. Otherwise, only the delete sign is shown. In other words, if there isn't anything to add, then the plus sign with the associated ...add a new X is not shown. This all works correctly. The counters work. The lists of previously deleted items are populated correctly.
What doesn't work is the last row of the second section being covered by a copy (at full width) of the first row from the third section. The first and third sections both look correct. phew, I hope this makes sense.
Here is what it looks like:
Sizes
- Size 1
- Size 2
+ ..add a new Size
Measurements
- Measurement 1
- Measurement 2
Note 1 << this is the problem row
Notes
- Note 1
- Note 2
+ ...add a new Note
Thanks for any help you can provide.
Ty

OK, after more digging I answered my own question.
The problem was the section order for added and deleting rows in setEditing. I was setting the indexPathForRow in section 2, then, 1, then 0. If I do the update in order 0, 1, then 2 it works fine in 2.0, 2.1, and 2.2.

For the last 2days I have had the words " No Service" in the top left hand corner of my iPad? This causes intermittent problems when logging into some websites and Downloading some emails? I currently run a wifi network of 1 iPad and 1 desktop compuHelp

For the last 2days I have had the words " No Service" in the top left hand corner of my iPad? This causes intermittent problems when logging into some websites and Downloading some emails? I currently run a wifi network of 1 iPad and 1 desktop computer. The wifi unit is a iinet BOB 2 unit. The other computer works completely fine. The only problem is with this apple iPad? I have rebooted iPad and rebooted BOB 2 wifi unit but this has made on difference to the problem?
Can anyone suggest any HELP
Thank You

For the last 2days I have had the words " No Service" in the top left hand corner of my iPad? This causes intermittent problems when logging into some websites and Downloading some emails? I currently run a wifi network of 1 iPad and 1 desktop computer. The wifi unit is a iinet BOB 2 unit. The other computer works completely fine. The only problem is with this apple iPad? I have rebooted iPad and rebooted BOB 2 wifi unit but this has made on difference to the problem?
Can anyone suggest any HELP
Thank You

I used firefox 3.6.14 on windows 7 x64 (firxfox x32). I found a problem when I develop my website and alert data or value via javascript , firefox hang (not response) every time. What's happend? How to solve is problem?

I used firefox 3.6.14 on windows 7 x64 (firxfox x32). I found a problem when I develop my website and alert data or value via javascript , firefox hang (not response) every time. What's happend? How to solve is problem?
Thank you for help
Lohkaeo

Oops - for some reason, this problem now seems to have gone away. May have had something to do with Flash. I'll keep my fingers crossed.

I have the next problem: when i'm listening music and i change a song it's appears the background of my iPod between a song and another. This happens after install iOs5 =[

I have the next problem: when i'm listening music and i change a song it's appears the background of my iPod between a song and another. This happens after install iOs5 =[
Please help me

I opened a new user on my computer yesterday with administrative privledges. I then opened up an itunes account from this new user. It seemed to go pretty well. I haven't downloaded any new songs yet or moved them to my account. I don't know how to move songs yet. I'm reading iPod and iTunes for Dummeies. Very appropriate for me. I will let you know when I manage to do this and am successful. Once again, thank you for your kindness and help. Kay 205

I am having problems when i have minimized windows and try to open a new window it will open all minimized windows along with the new window. It just changed when mozzilla updated. It did not do this before the update.

I am having problems when i have minimized windows and try to open a new window it will open all minimized windows along with the new window. It just changed when mozzilla updated. It did not do this before the update. Before the update if i had minimized windows they would stay minimized when i opened a new window. Please help ,I would guess it is just a setting somewhere but i cannot figure out where the setting is. Thanks jason

This issue can be caused by the ASK.com Toolbar.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

HT4623 my iphon 4s got problem when i was updating it and screen become black and there is a usb & itone icon on it it dose not work any more ..any feedback about this guys?

my iphon 4s got problem when i was updating it and screen become black and there is a usb & itone icon on it it dose not work any more ..any feedback about this guys?

Connect it to iTunes and restore it.

Problems when trying to import metadata from SQL server using OWB

Hi,
We are using Oracle 11.2 EE on AIX and OWB: 11.2. We are in the process testing Oracle Transparent gateway for SQL Server and have installed and configured it on a standalone windows server. We and have run the ORACLE_HOME\dg4msql\admin\dg4msql_cvw.sql on SQL Server side, in order to query the SQL-Server data dictionary. We have created a DB-link and can pull data correctly without any problems. When trying to import metadata in OWB Client on win xp, we have created a non-oracle SQL Server Module and are able to connect and start the import, but the displayed table names look strange and can not be imported. In front of every letter there is a square box, so instead of ADDRESS (the address table in the source system) , it reads "squarebox"A"squarebox"D"squarebox"D"squarebox"R"squarebox"E"squarebox"S"squarebox"S and subsequently the import fails with :API0413: Illegal name [<tablename>] Name with preceding and trailing spaces is not allowed.
The gateway have been configured with the following parameters:
HS_FDS_CONNECT_INFO=<connect string>
HS_FDS_TRACE_LEVEL=OFF
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVER
HS_LANGUAGE=AMERICAN_AMERICA.WE8MSWIN1252
Any ideas ?
This topic has been posted in the Heterogenious Forum as well, but as the problem is within OWB, I also post it here.
Thanks in advance!
Henrik
Edited by: he**** on Nov 15, 2011 1:29 PM

Henrik,
I've found other problems where OWB adds a space between all characters returned from SQL*Server which is what is happening in your case, although it is being displayed as a square box.
In one of these cases the problem was fixed by using the 11.2.0.2 OWB so would it be possible for you to try with that version ?
Also, as the problem is not with the gateway itself as you can select successfully using a database link then it would be better to follow up in the OWB forum -
Forum: Warehouse Builder
Warehouse Builder
as they will be able to help with the OWB side of the problem.
Regards,
Mike

SOLAR01: Problem when entering the same T-Code twice

Hi all,
I am encountering a problem with Solution Manager 4.0, transaction SOLAR01.
When entering the same transaction code twice (in the Transactions tab) for a particular Business Process, I get the following error message:
"The specified key already exists"
Therefore, unless I flag the object for deletion (by selecting the row and choosing the "Delete Row" option), I am not able to proceed further.
Has anybody else encountered this problem and is there a proper workaround?
Thank you,
Orestis

Hi Jason,
Thank you for your post.
The reason for entering the same transaction twice is to test the sequence of the business process.
So, for a specific system integration scenario, I may need to create a customer in one transaction and return to that same transaction later to modify the customer (this is just an example). As one transaction may be used for different tasks at different points in time, I would like to reflect that sequence in the Solution Manager.
Kindly advise if you believe this is not the correct approach or if Solution Manager does not support this kind of "sequencing".
Thanks for your support!
Orestis

Problem when creating Database (Database, OS and hardware Configuraiton included)

Problem when creating Database:
Below are the problems, which I faced during creation of database. I have mentioned both the problem separately. Plus the log file maintained by Oracle during installation. It might help in diagnosing the error. Plus a little conclusion with I turned up to.
There are two problems, when creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
Problem # 1:
When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
I searched following oracle help for this problem.
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Problem # 2:
When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
I searched following oracle help for this problem.
ORA-12571: TNS:packet writer failure
Cause: An error occurred during a data send.
Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Log File Showing Error :
Result code for launching of configuration tool is 0
Launched configuration tool Oracle Database Configuration Assistant
Command which is being spawned is C:\Program Files\Oracle\jre\1.1.7\bin/jrew.exe -Duser.dir=d:\oracle\ora81\assistants\dbca\jlib -classpath ";C:\Program Files\Oracle\jre\1.1.7\lib\rt.jar;C:\Program Files\Oracle\jre\1.1.7\lib\i18n.jar;d:\oracle\ora81\jlib\ewt-3_3_6.jar;d:\oracle\ora81\jlib\share-1_0_8.jar;d:\oracle\ora81\jlib\swingall-1_1_1.jar;d:\oracle\ora81\assistants\dbca\jlib\dbassist.jar;d:\oracle\ora81\assistants\jlib\jnls.jar;d:\oracle\ora81\assistants\jlib\acc.jar;d:\oracle\ora81\jlib\help-3_1_8.jar;d:\oracle\ora81\jlib\ice-4_06_6.jar;d:\oracle\ora81\jlib\netcfg.jar;" DBCreateWizard -progress_only -responseFile NO_VALUE -createtype seed -numusers NO_VALUE -apptype NO_VALUE -cartridges NO_VALUE -options NO_VALUE -demos NO_VALUE -seedloc d:\oracle\ora81\starterdb -sid ora8i -orabase d:\oracle -clususer NO_VALUE -cluspswd Protected value, not to be logged -nodeinfo NO_VALUE -gdbName ora8i
Invalid Exit Code. The following result code will be used for configuration tool: 1
Configuration tool Oracle Database Configuration Assistant failed
The datafiles will be copied from the CD to d:\oracle\oradata\ora8i. The Oracle Database Configuration Assistant will begin creating the database.
An Oracle database will be created for you. The database name will be ora8i. The system identifier for the database will be ora8i. The password for the INTERNAL account will be ******, the SYS account will be change_on_install and the SYSTEM account will be manager.
Log File of Installation:
The above code is a part of the log file, which is generated by Oracle installer at C:\Program Files\Oracle\Inventory\Log\..
I just pasted the part of code, highlighted is the code showing error with Oracle Database Configuration Assistant.
Software & Hardware Configuration are as follow:
Software:
Database
Oracle 8.1.7.0.0 (Oracle8i)
Operating System
Microsoft Windows 2000
5.00.2195
Service Pack 2
Hardware:
x86 Family 6 Model 8 stepping
10
AT/AT COMPITABLE
260,400 KB RAM

Dont't worry about that. Before you
create a table(or view), it is wise to
drop the table(or view) with the same name.
If the name doesn't exist, of course there
is an error message. See the following script:
-------------------begin-----------
drop table students cascade constraints;
create table students (
sid varchar2(5),
fname varchar2(20),
lname varchar2(20) not null,
minit char,
primary key (sid));
--------------end-----------------
Good day!
null

Problem when creating Database (Database, OS and hardware Configuraiton)

Problem when creating Database:
There are two problems, which I faced during creation of database. When creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
Problem # 1:
When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
I searched following oracle help for this problem.
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Problem # 2:
When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
I searched following oracle help for this problem.
ORA-12571: TNS:packet writer failure
Cause: An error occurred during a data send.
Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Software & Hardware Configuration are as follow:
Software:
Database
Oracle 8.1.7.0.0 (Oracle8i)
Operating System
Microsoft Windows 2000
5.00.2195
Service Pack 2
Hardware:
x86 Family 6 Model 8 stepping
10
AT/AT COMPITABLE
260,400 KB RAM

user563502 wrote:
I am working on Solaris 8. What is Alert_SID.log? where can I find it?
ThanksFor the responsible of the upgrade of Oracle database, not even know what Alert log is?
to be honest with you, this is not your work.

Problem when entering time machine

Ok ever since Leopard when entering time machine it freezes for the longest time causing me to reboot the computer. Why is that my eMac meets the min requirements and I have finder on set to coverflow. When entering into time machine it freeze during the process of trying to display coverflow. The only way to bypass this is for me to browse the backup drive without entering to time machine like if it was a regular drive then copy and past.
Message was edited by: PokemonFan1987

Does anyone know?

I have a problem when i close the prgram and i open it agin it open on the page which i closed at it

when i close firefox at any page and also when i close my pc and then i open the program i find it open on last page which i closed at ,, although i made home page for it to open at and it doesn't make the order

Check in preferences > general > Startup: Do you have "Show my windows and tabs from last time" selected? If so change to "Show my home page" (or blank page).
Note: this may happen when quitting Firefox, and you inadvertently click "Save and Quit" and select "Do not ask next time".

Reading Advanced Metadata in Smart Collections, not working in Bridge CS6

In Bridge CS5 you could make an Smart collection that were looking for: All metadata > contains > "here we add a value from a metadata only visible from the Advanced tab in File info"
But this nolonger works in CS6.
Although I can go to File info and see the metadata value that are visible from Advanced. But the option All metadata, clearly doesn't support the advanced metadata in the file in CS6.
Could this be a bug in CS6?

If any one like to try this yourself and get same or other result, please let me know!
Otherwise this must be a bug to report to Adobe.
I don't have CS5 installed anymore but CS6 is still present while I use Bridge CC for my daily workflow (MacPro MacOSX 10.8.5).
I first copied 4 DNG files from my main folder to a subfolder. Those files I added a name to the IPTC extension persons name and saved.
Checked and this name shows in the IPTC extension persons name field in Metadata panel as well as in Advanced Tab in File Info IPTC Extended Properties / IPTC4xmpExt:PersonInImage(Bag container).
I closed the subfolder and used the smart collection icon to bring up the Find window.
I then selected All metadata and filled in the persons name, had subfolders and non indexed already included and put the source field to the main DNG folder.
The result was almost instant with the 4 files showing.
I then quitted Bridge CC and started Bridge CS6
Since I had not used this for a while and my main folder contained 4500 DNG I set the cache quality icon to embedded only. Selected the same folder and followed the same procedure as in CC.
Naturally it took a bit longer because the files needed to be indexed first, yet after this the result was still the same, the 4 DNG files with the persons name showed in the smart collection.
So on my behalf I can't reproduce your problem and for me it is not a bug also I'm afraid.

When developing an image from a smart collection "has no adjustments" it gets immediately deselected

I am wondering if this could really be the intended LR behaviour?
I start from a smart collection, one of the criteria is "has no adjustments".
Ok, as soon as I move the first slider in develop module, it no longer matches that criterion.
But that should be no reason for LR to force me to immediately stop the develop edits on the selected image.
It immediately unselects, and I stay in Develop module with a grey window and the message "no image selected". (It does not move on to the next image, which still matches the criterion.)
I would expect that when I return to Library module, it would return to the same smart collection where I started, but I would not find my last developed images there, as they no longer match the criterion.
But that LR grabs it immediately out of my develop selection?
Strange enough it stays the same, when I first explicitely selected all images while in Library/smart collection.
My expectation would be that I have this selection fixed to work on in Develop module. Similar to when I select any images from survey view and go to Develop module.
But no, the only workaround I found is:
Start from the smart collection, ctrl a to select all, then arbitrarily click on another collection withput this criterion - selection stays fixed - then move over to Develop module.
This is LR4.1 on Win7.
Definitely my functional specification would be: never take off an image from Develop unless the user moves on to another image.
So ignore from where an image was picked.
Would you consider this a bug? Or a "feature"?
Do you see the same in LR4.2 or 4.3RC? Behaviour on a Mac?
Cornelia

There is a feature request that has been around for a long time to be able to "lock" the contents of a smart collection so you can work on the photos in it, before "releasing" it for recomputed contents.
My workaround is to copy from smart collection to dumb (I encountered this so often that I created a 1-keystroke plugin mini-feature to help). Before that I actually used a private keyword whose presence was enough to hold a photo in a smart collection (set the keyword to work on photos, clear the keyword to release them). Then as long as you add that keyword as criteria to every smart collection you may edit in, and add the keyword to every photo in the collection that you may work on... - yuck.

Problem when enterring punctuation in Metadata and Smart Collections

Similar Messages

Maybe you are looking for