Problem when extracting DataSource 0PAYSCALELV_ATTR from R/3 ECC6 to BW 3.5

We have recently begun upgrading to ECC6.0 from 4.7. We are still using BW 3.5. After upgrading our Sandbox to ECC6.0, we found a problem when extracting Pay scale level attributes using DataSource 0PAYSCALELV_ATTR. For some reason the table values are being multiplied by 26 by the extractor, which was not happening in 4.7. Therefore in our BW system, these employees salaries are being calculated incorrectly because the hourly rate coming from R/3 is already wrong. Please help!
Kim Huskey
Tarrant County IT
CCC - SAP Support

Hi Surendhar,
Did you try to check the connection b/w ypur source system and the target system?
You can do it by executing T.Code RSA1-> Select Source Systems-> Right click your source system-> Check.
Also, pls check ST22 for any short dumps and SM21 for system logs.
Hope it helps!!!!
Amit
Message was edited by: Amit

Similar Messages

Request: Problem in Extraction of data from CRM to BW

Hi Gurus
I have problems in extracting the data from CRM to BW.I thought you are the one who can solve them:
1) When I check the data in the datasource in RSA3 i can see all records as well as i can see complete data in that but when i extract and check the data in cube i can see all records but i cannot see the complete data i.e some data is missing.
2)And another problem is that In report i have 2 characteristics(DATS) start date and end date now i am trying to get number of days from start date to end date.
I appreciate you in advance. If u find any good documentation please send me to [email protected]
With regards
Nagamani.

Hi krishna,
yes we did enhancement to this data source. In PRDOCTION its taking 27 hours time to load data.
For extraction from source system (CRM) its taking nearly 24 hours time as per JOb LOG .
08/05/2010 11:53:08 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 10,849 records
08/05/2010 12:02:02 Result of customer enhancement: 10,849 records
08/05/2010 12:02:03 PSA=0 USING & STARTING SAPI SCHEDULER
08/05/2010 12:02:03 Asynchronous send of data package 1 in task 0002 (1 parallel tasks)
08/05/2010 12:02:06 IDOC: Info IDoc 2, IDoc No. 1576298, Duration 00:00:01
08/05/2010 12:02:06 IDoc: Start = 08/05/2010 10:26:37, End = 08/05/2010 10:26:38
08/05/2010 13:02:38 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 10,958 records
08/05/2010 13:11:48 Result of customer enhancement: 10,958 records
08/05/2010 13:11:52 Asynchronous send of data package 2 in task 0003 (1 parallel tasks)
08/05/2010 13:11:53 tRFC: Data Package = 1, TID = 0AA00D0301984C5AEE8E44DB, Duration = 00:16:
08/05/2010 13:11:53 tRFC: Start = 08/05/2010 12:02:19, End = 08/05/2010 12:18:27
08/05/2010 14:30:13 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 11,296 records
08/05/2010 14:39:53 Result of customer enhancement: 11,296 records
like this its taking 24 hours in extraction its self.
Edited by: kotha123 on Aug 10, 2010 12:08 PM
Edited by: kotha123 on Aug 10, 2010 12:09 PM

Short dump error when extracting delta records from R/3

I am working on BW 3.5 and I am facing some short dump error when extracting delta records from the r/3 to BW.
Below is the error message
Kindly do the needful ASAP.
Job started
Step 001 started (program SBIE0001, variant &0000000024277, user ID BWREMOTE)
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = 0ISCM_PAYMENT_01
         Current Values for Selected Profile Parameters               *
abap/heap_area_nondia......... 2000000000                              *
abap/heap_area_total.......... 2000000000                              *
abap/heaplimit................ 40000000                                *
zcsa/installed_languages...... DE                                      *
zcsa/system_language.......... E                                       *
ztta/max_memreq_MB............ 2047                                    *
ztta/roll_area................ 6500000                                 *
ztta/roll_extension........... 2000000000                              *
2,454 LUWs confirmed and 2,454 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DAT
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelled

Hi,
I look at the transaction ST22 to see which type of error has given you. Take a look at the notes to correct the error.
Another option is to look at OSS notes, because the error is giving you a standard extractor.
Greetings,

We have created shared folder on multiple client machine in domain environment on different 2 OS like-XP,Vista, etc. from some day's When we facing problem when we are access from host name that shared folder is accessible but same time same computer when

Hello All,
we have created shared folder on multiple client machine in domain environment on different 2 OS like-XP,Vista, etc.
from some day's When we facing problem when we are access from host name that shared folder is accessible but same time same computer when we are trying to access the share folder with IP it asking for credentials i have type again and again
correct credential but unable to access that. If i re-share the folder then we are access it but when we are restarted the system then same problem is occurring.
I have checked IP,DNS,Gateway and more each & everything is well.
Pls suggest us.
Pankaj Kumar

Hi,
According to your description, my understanding is that the same shared folder can be accessed by name, but can’t be accessed be IP address and asks for credentials.
Please try to enable the option below on the device which has shared folder:
Besides, check the Advanced Shring settings of shared folder and confrim that if there is any limitation settings.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Problems when printing help topics from OHJ

We have encountered some persistent problems when printing help topics from Oracle Help for Java (Ice Browser).
NOTE: When we print the same source files from Oracle Help for the Web, the printing problems are gone.
(1) Spacing Errors (all printers had identical results)
Text with special formatting (<b>, <i>) often has either too much space or not enough space.
Links often have extra spaces underlined before or after the link, itself.
(2) When printing multiple help topics from the TOC (an entire branch in the tree):
On some printers, no graphics print correctly, but instead print as one of the following: 1. empty box the size of one character, 2. black box the size of one character, 3. black box the size of the original graphic. We could not detect a pattern that caused 1, 2, or 3.
NOTE: all graphics are bit maps (screen captures) that were generated in the same manner.
NOTE: if these same help topics are printed one at a time form Oracle Help for Java, the graphics print fine.
Is this a problem with the Ice Browser?
Thanks for the help,
Wendy Studinski

There are a known issue with the ICEBrowser printing in some circumstances. The laying out of text by the ICE Browser relies on font metrics (being able to measure the width of a run of text in a given font). On screen it looks great, but when printing, even though the GraphicsConfiguration for the printer is being used, these widths are sometimes off, which can result in text running together at boundaries between text styles. We're not sure what to do about this problem, and we've reported it to IceSoft.
Not every font has this problem, so varying the font you are using might help the appearance when printed.
The other problem you report, problems with the images when printing multiple topics, is something that we will look into.

Problem when extracting Smart Objects

I am having a problem when extracting Smart Objects.
I work for a small pre-press company. We are working on several computers using one Job Server. Some of these computers have different versions of OS.
For one of our clients the company uses Smart Objects as a precaution for moire issues. The child file stays a certain size, while the parent file is sized down for print. Our client has started to request the larger Child size image for their use. For the volume of images requested, I have made an action out of Photoshop to open the smart object and save out a flat tif of the larger child file image. Here is the problem...
At times the smart objects child file does not retain the name of the smart object layer as its being extracted. What could be causing the lost connection between the parent file name to the child file name, and is there a way to prevent it in the future?
Thanks for your help:)
DVan

Hello,
I have noticed that. The true problem is that the child files name starts out as the parent layer name, but then somewhere down the line it turns wonkie, starting to be named things like 12.psd etc. Please see attached. Your can't re-save the name of the child file either because all that does is save out a named temp file that does not get linked back to the parent file....so what is making the name change?

Problem when i transported DTP from DEV to QA

I am facing a problem when i transported DTP from DEV to QA It is not in the folder were it have to be,but i can see it in RSBKDTP table of QA

Hi,
One info regarding DTP, Technical name will get differ from system to system through out the landscape ( Dev, QA, Prod) . So you have to search with Description of the DTP instead of technical name.
Regards,
Sridevi.

When extracting SD data from R/3, err in tRFC raised that "No service for."

Hello fellows,
when I'm extracting SD data from R/3, an error raised about IDOC that "No service for system SAPSB2, client 100 in Integration Directory", and there is no work processing working in the R/3 system, could anybody help? Thanks!
Jennifer

Hi,
You are extracting Data from ECC, so here no way related to XI, I think, the problem is with Parner Profile and IDoc settings, so chek it in WE20.
or
take IDoc nos from BW-->RSMO (in the detailed tab bottom you can find OLTP IDoc nos) and then goto ECC, BD87 and give that IDoc and check,
And also check in WE05 what is the Idoc Statu, this is connection problem only, so check with BAsis team.
Thanks
reddy

How to avoid the split problem when uploading the data from csv file

Dear Friends,
              I have to upload data from the .csv file to my custom table , i have found a problem when uploading the data .
i am using the code as below , please suggest me what i have to do in this regard
      SPLIT wa_raw_csv AT ',' INTO
                wa_empdata_csv-status
                 wa_empdata_csv-userid
                 wa_empdata_csv-username
                 wa_empdata_csv-Title
                 wa_empdata_csv-department.
APPEND wa_empdata_csv TO itab.
in the flat file i can see for one of the record for the field Title as
Director, Finance - NAR............there by through my code the wa_empdata_csv-Title is getting splited data as "Director, and Department field is getting Finance - NAR" , i can see that even though " Director, Finance - NAR" is one word it is getting split .
.......which is the problem iam facing.Please could any body let me know how in this case i should handle in my code that this word
"Director,Finance - NAR"   wil not be split into two words.
Thanks & Records
Madhuri

Hi Madhuri,
Best way to avoid such problem is to use TAB delimited file instead of comma separated data. Generally TAB does not appear in data.
If you are generating the file, use tab instead of comma.
If you cannot modify the format of file and data length in file is fixed character, you will need to define the structure and then move data in fixed length structure.
Regards,
Mohaiyuddin

Problems when trying to migrate from 6.0 to 6i

Hi,
I'm having problems when trying to migrate a Designer 6.0 application to 6i.
When I get to start the migration after having selected the source application, the process fails immediately after I've pressed the button.
I'm getting the error: CDR-21244: This process has been aborted and the advice to check the log file. But no log file is created.
I've read Note 234984.1 which gives two suggestions in this situation: That the ORACLE_HOME environment variable is unset, and that the LOG_DIRECTORY_RAU directory is writeable. Both is fulfilled in my situation. However it seems that the migration procedure tries to start imp - I've noticed a short flash with the command prompt screen - and when I try to start imp manually from the command prompt I get errors. I was able to fix this error by setting ORACLE_HOME and ORA_NLS33. But the defining ORACLE_HOME is "illegal" ref. Note 234984.1. Of course I tried to leave it anyway, but that didn't help neither: The migration still dies a quick and silent dead.
So now I'm stucked. How can I carry on?
The source is on version 6.0.3.5.0 running on 8.1.5, and the taget is version 6.5.92.1.9 running on 8.1.7.4.
Regards, Michael

The migration from Designer 6.0 to 6i requires careful planning. Please read the migration guide on OTN (http://www.oracle.com/technology/products/designer/index.html) for advice and to assist you with the migration.
Regards
Sue

Migration: Problem when migrating DataSource

Hi,
I'm trying to migrate an infocube from 3.x to 7.0, I created transformation and infosource ZIS_SS_TD_MG. When i'm trying to migrate DataSource then error displaying as
" Activation of Objects with Type DataSource "
Errors:
The data object "L_S_DATA_APPL_0001" does not have a component called "".
Code line has errors: " cuky = l_s_data_appl_0001-"
Syntax error in routine "convert_line_0001 ", line 507 of generated program"
Error when activating DataSource IS_SS_TD I_EXTERN
Warnings:
Field /BIC/SMID_SS ( Position 1 ): Only internal format can be selected if character PSA
Field /BIC/PQTY_SS ( Position 2 ): Only internal format can be selected if character PSA
Field /BIC/SALES_S_S ( Position 3 ): Only internal format can be selected if character PSA
Field /BIC/PROFIT_SS ( Position 4 ): Only internal format can be selected if character PSA
Field /BIC/SALES_S_S ( Position 3 ): Missing reference to currency field/unit field
Field /BIC/PROFIT_SS ( Position 4 ): Missing reference to currency field/unit field
Please help me to solve
Thanks

Hi,
This is probably because you have a key figure with fixed currency, instead of having a reference currency for your key figure. The system tries to generate programs(subroutines/include program) and get the reference currency field but fails, so that syntax error happens for the generated program.
Haifeng

Problem when participant training booking from MSS- ECC

Hi All,
i have a problem with book/cancel training from webdynpro application(mss) as like LSo_psv1.
I am able to book the training using FM RH_PARTICIPATION_INSERT.But participant document(TPARTDOCNO)field not geting filled.
I am not able to cancle the participant training booking using RH_PARTICIPATION_DELETE from MSS.it is giving dump.
I hope the Participation documentno which is not filled when booking causing dump.
please help me in this isuuse why tpartdocno field not getting filled when insertion.please provide logic if any.
Regards
sarath

Hi,
I have run the program RHSETPADBOOK_LSO to fill TPARTDOCNO filed in HRVPAD25 table for the existing entries,and able to cancel bookings after that.
But still that field not getting filled for new bookings for new courses too.
any idea why this is happening and how to solve.
Regards
sarath

Problem when loading pdf files from Shared Content

When I load pdf files from Shared Content, I got the following problem: "The selected document could not be retrieved, please try uploading the document again."
Anyone knows this?
Thank you very much in advanced.

I don't migrated the program, but installed it from the original installer,
i. e. I first installed Indesign from backup, and then uninstalled it and
reinstall clean from Adobe.
What a plug-in or utility converts page from InDesign to PDF?
2014-08-10 22:51 GMT+04:00 Peter Spier <[email protected]>:
problem with exporting PDF files from InDesign CS5 created by Peter
Spier <https://forums.adobe.com/people/P+Spier> in InDesign - View the
full discussion <https://forums.adobe.com/message/6627440#6627440>

Problems when i copy text from Pdf and paste on Word

In Pdf documente the text is in perfect conditions, but, when i copy the text and paste in WORD document the character change into random crazy character like: "()*"*&!(!*"(!"(!)"( )*"()!*("!&("@*")(!*@"!*@(
how i fix this??

I have the same problem when copying the PDF into a Word file. I tried Save as RTF doc. and it is still just symbols.
It could be a font problem, because it has some weird Gill Sans and Futura fonts. I am sending a picture as an example.
The option of exporting as Tiff and then applying OCR is interesting but still is kind of slow when i have a 100 pages document. If the fonts is the problem is there any way i could select the whole text and apply it a known font like Arial?
Thanks for any info!
Cheers,
Sebastian

Problem when extracting data from R/3 to BI

Hi Experts,
I am facing a strange problem. While i am extracting data from R/3 yo BI. One Infopackage is running successfully and i can see the data at Bi side. But while I am running another infopackage for another data source it is taking long time and at last loading results into failure.
I have gone through SDN also but not able to find any inputs.
I think it might be the reason with the Idocs. The error it is giving is
Request still running
Diagnosis
No errors found. The current process has probably not finished yet.
System Response
The ALE inbox of BI is identical to the ALE outbox of the source system
or
the maximum wait time for this request has not yet been exceeded
or
the background job has not yet finished in the source system.
Current status
All of the packets from the source system arrived
I am not able to see list of Idocs in sm58.
What might be the reoson?
Regards,
sridhar

Hi,
See if its a full schedule it again by deleting any old requests....
And then when going thru job overview>in the sourcesystem>u can execute there itself and chk the status of the job...
If its no there then the job might have missed up due to some unfair reason....it happens sometimes also..some times it will be in scheduled only....once select all active/cancled/finished and so on...
And also chk under details tab...under extraction....whether data selection scheduled and requested and finished....????
If not there try to run it again and at the same moment monitor in source with jobname as BIREQU_* and select all input entries as canceled/active/finished......
rgds,

Problem when extracting DataSource 0PAYSCALELV_ATTR from R/3 ECC6 to BW 3.5

Similar Messages

Maybe you are looking for