Problem when flying and using Ipod

Everytime I fly my ipod crashes. Has anyone experienced this before? How do I fix it?

This is not an uncommon complaint. If you search these forums going back a ways you will find a decent number of people who have iPods that after getting up in the air stop working until the land again.
The iPod is supposed to be good to some number of feet (10,000 maybe?) and airlines normally pressurize their cabins to be no more than the equiv of 8000 feet, but often less, so normally should be below the pressure levels for proper iPod use.
But, yes, some people just seem to have ones that don't even like a few/several thousand feet of elevation. Not much you can do about it unfortunately other than buying another one for flight use (maybe a flash based Nano would hold enough for most plane rides).
Patrick

Similar Messages

  • I just installed yosemite on my mcb pro mid 2012 and installed win8.1 with bootcamp. now i have the problem, when i'm using windows i don't see my mac partition in the "computer" window. there is only the "bootcamp (c;) partition? what's the problem?

    i just installed yosemite on my mcb pro mid 2012 with a clean install. so i only had the new os x yosemite running on my mac. everything went perfect. than i installed win8.1 with the bootcamp assistant and also everything went perfect.
    But here's the Problem:
    When i'm using Windows 8.1 and i go to the "Computer" window where i can find my hdd partition "Bootcamp (c;) there is only this Partition. the mac Partition is missing.
    so i am not able to read the files on my mac Partition.
    Before i installed yosemite and win8.1, i was running mavericks and win7 on my macbook pro and i haven't had this Problem. i was able to see and read my mac Partition also on Windows 8.1???
    is there any solution for this Problem???
    greez c

    "Before i installed yosemite and win8.1, i was running mavericks and win7 on my macbook pro and i haven't had this Problem. i was able to see and read my mac Partition also on Windows 8.1???"
    Sorry there's a mistake in the sentence!
    i mean:
    "Before i installed yosemite and win8.1, i was running mavericks and win7 on my macbook pro and i haven't had this Problem. i was able to see and read my mac Partition also on Windows 7???"

  • Problem when try to use ACSE+ Windows AD to authenticate two kind of WLAN c

    I met a problem when try to use ACSE+ Windows AD to authenticate two kind of WLAN clients:
    1. Background:
    We have two WLAN: staff and student, both of them will use PEAP-MSCHAPv2, ACSE will be the Radius server, it will use Windows AD's user database. In AD, they create two groups: staff and student. The testing account for staff is staff1, the testing account for student is student1.
    2. Problem:
    If student1 try to associate to staff WLAN, since both staff and student WLAN using the same authentication method, the auth request will be send to AD user database, since student1 is a valid user account in AD, then it will pass the authentication, then it will join the staff WLAN. How to prevent this happen?
    3. Potential solution and its limitation:
    1) Use group mapping in ACSE(Dynamic VLAN Assignment with WLCs based on ACS to Active Directory Group Mapping), but ACS can only support group mapping for those groups that have no more than 500 users. But the student group will definitely exceed 500 users, how to solve it?
    2) Use methods like “Restrict WLAN Access based on SSID with WLC and Cisco Secure ACS”: Configure DNIS with ssid name in NAR of ACSE, but since DNIS/NAR is only configurable in ACSE, don't know if AD support it or not, is there any options in AD like DNIS/NAR in ACSE?
    Thanks for any suggestions!

    I think the documentation for ACS states:
    ACS can only support group mapping for users who belong to 500 or fewer Windows groups
    I read that as, If a user belongs to >500 Windows Group, ACS can't map it. The group can have over 500 users, its just those users can't belong to more than 500 groups.

  • Problem when try to use 2 computers

    Hello there.
    I'm now facing a problem when try to use 2 computers. Specifically, I downloaded my ebook (pdf form) in my laptop and open it without problems. But when I tried to reopen the same book (from human kinetics site) to my pc, the known message revealed ("E_LIC_ALREADY" etc etc).
    As I realised, in my laptop, the ADE wasn't authorized (in fact, "is authorized without an ID"). I tried but didn't achieve to authorize it (it's not accepting my username and password, saying that the specific ID is already used, obviously when I made the similar procedure on my pc, a year ago), whereas I'm also not able to re-open the book in my pc (I made copy-paste to the appropriate folder of my pc, by the way...). What's the solution in this case? I mean, it's very annoying for me and I desperately want to solve it...
    Thank you in advance,
    Nikolas

    Answer 1 : Really not quite sure about this ....
    Answer 2 : turn the card upside down and check the model number .. the model number would be WPC54G and if there v2/v3/v4 after it it means that the card is version 1 ....
    Answer 3: As you windows xp , go to start >> programs >> uninstall wireless notebook adapter.... insert the CD for the adapter ...take the card out and insert it back again.... follow the instructions on the found new hardware wizard ... this will install the drivers for the adapter and then you can use the windows wireless configuration utility to connect to the wireless network ....

  • I am having a problem when I plug my iPod into my macbook. When I plug the cable into my mac I get the following message - "Because a USB device was drawing too much power from your computer, your USB device has been disabled." PLEASE HELP!

    I am having a problem when I plug my iPod into my macbook. When I plug the cable into my mac I get the following message - "Because a USB device was drawing too much power from your computer, your USB device has been disabled." CAN SOMEONE PLEASE HELP!

    The rest of the message in the pop up window says "To prevent damaging your computer, the USB device drawing too much power has been disabled. Other devices may have also been disabled. When you disconnect the device drawing too much power, your other USB devices will be enabled again."

  • TS2634 My problem - when syncing and error messages  comes up:  iTunes could not sync calendars to the iPhone because an error occurred while margin data."  I've tried turning the phone off and back on, & tried both USB ports but get the same thing.  What

    My problem - when syncing and error messages  comes up:  iTunes could not sync calendars to the iPhone because an error occurred while margin data."  I've tried turning the phone off and back on, & tried both USB ports but get the same thing.  What can I do next since it doesn't give me even one clue as to what the error would be?

    Before I started to resync calendars one by one as suggested in the troubleshooting article, I remembered something that came up in a sync when I first attempted :  a 'which one do you want to keep' message about a repeating calendar event, which came up with three options, one from Calendar, and two from iCal on the phone.  I deleted that event, then went through the calendar resync one by one, and all seems OK now.
    In Music there is a way to find 'ghost' items that show up as grayed-out on the menus, so that you can try to reassociate or delete them.  It would be nice to have a similar way to work with Calendar!
    Thanks for pointing me to the right article.

  • HT201415 actually i am use iphone5 in bangladesh. But i am facing some problem , when i am useing the internet over cellular data network. when i am open the cellular data on but no icon E display but when Enable 3G on-of then E is aviable.its a device pr

    actually i am use iphone5 in bangladesh. But i am facing some problem , when i am useing the internet over cellular data network. when i am open the cellular data on but no icon E display but when Enable 3G on-of then E is aviable.its a device problem or Carrier ?

    Hafizur Rahman wrote:
    when i am open the cellular data on but no icon E display but when Enable 3G on-of then E is aviable.its a device problem or Carrier ?
    Problem? I'm not even sure what your problem is, much less whether it's a problem with the phone or the carrier.

  • My iphone4 is very very hot when charged and used and the camera cant be opened.

    my iphone4 is very very hot when charged and used and the camera cant be opened.

    Not normal. Take it to an Apple Store for evaluation.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
     Cheers, Tom

  • Can i purchase a sim card when abroad and use in my iphone to get better coverage

    can i purchase a sim card when abroad and use in my iphone to get better coverage

    Only if your iPhone is unlocked.

  • When travelling and using 3G what the best way to turn off all internet connections except web browser on a Mac pro?

    When Travelling and using a 3G mobile stick for internet connection My MacPro burns through a lot of expensive connection data time doing background stuff such as checking messages, email, ungrades etc. Whats the best way to turn all this off so that intenet is only accessed when I request it?
    Thanks

    To turn off iMessages see this thread - https://discussions.apple.com/thread/4504796?start=0&tstart=0 
    For iCloud, read the article - http://support.apple.com/kb/PH2613 

  • TS3899 My ipood touch works fine when at home and on my own wi-fi network but when abroad and using wi-fi I can only receive emails but my ipod touch won't send my messages.  I am not very techy but don't know how to resolve this problem.  Any advice?

    Hi
    I am having problems sending emails when using my ipod touch with wi-fi abroad.  When at home my ipod touch receives and I can send emails through my home wi-fi system but when away and logged into other wi-fi networkcan only receive emails and not send them.  Internet access is fine when abroad.
    I am assuming that this is to do with the outgoing server but this is only a guess!
    I am not very techy so any ideas how to resolve this problem would be gratefully received.
    Thanks
    KeithGH

    Seems like the other networks are blocking you from sending emails.
    Do yo have more that one email account on the iPod?
    Have you tried sending from another account?

  • Various problems when trying to use both my iPhone 4 and iPhone 5 at the same time? HELP!

    I am experiencing a wide range of problems with both of my iPhones. They are both a 4 and a 5. I will list the problems I am having.
    Using both phones:
    A few weeks ago I recieved a new phone, the iPhone 5 as my contract was renewed. I backed-up my old phone, the iPhone 4 to my computer and restored it onto my 5. But when using my 5, I discovered it has 'no service' (but will use wifi), it won't send IMs OR texts and Apple constantly keeps asking me for my Apple ID which i recently changed but still uses the old email, and won't accept any passwords.
    The 5 used to send IMs and texts but they would be sent to my friends through my email address, so I googled this and went to messages>send and recieve, and the only thing i can select is my email, not my number. I am using the 4 as well, purely so I can send texts and IMs through my name, not my email. The 4 also has signal and wifi, whereas the 5 only has wifi. I am wondering if the 5 has no signal and won't send IMs & texts because I am still using another phone? Surely they both cannot work together, so I was thinking I could reset my iPhone 4, and then see if the iPhone 5 will work, once the second phone isn't used anymore. If that doesn't work, I thought I could reset my 4, back-up my 5 and then restore again. I think that will work, but I have no idea.
    I have absolutely had it with trying to figure it out, I have used google but nothing seems to work. I am really hoping someone can tell me what to do with all my phone problems, because they are absolutely driving me mad!!!!!!!!!!!!!!!!!!! 
    I need to use the 5, it is costing me an extra £60 a month to use and I feel as though that money is being wasted as I can't text, IM or call people. Should i just get rid of the 4 and see what happens? I read online that to stop iMessages coming through as your email, you should turn it off and use regular texts. BUT I DO NOT WANT TO DO THIS. I send way too many texts, and it would cost a fortune. I also can't send photo messages on texts, because they cost a bomb to send through. I want to be able to use both texts and iMessages - using my name, not my email. 
    To add on to that huge essay I have written, on both phones Apple CONSTANTLY asks me for my Apple ID which I recently changed. I changed the email and the password, and it is coming up with the wrong email, and whatever password I put in, it still says it is wrong. It doesn't make sense, because yesterday I purchased some music from iTunes and when asked for my Apple ID, it used the right email and accepted the correct password. ...??? yet it still keeps getting it wrong, even though it worked in iTunes. ??!?
    Okay so I just reset my iPhone 4, and nothing seems to have changed...I thought if I reset it, it would be completely wiped, like a brand new iPhone 4, but it's not....THIS IS SO IRRITATING! Can someone please help me! I GREATLY appreciate any answers, hopefully someone on the internet can fix my problem! thank you for taking the time to read this essay, I am very thankful. PS. Both phones are up to date.

    You said, "the 4 also has signal and wifi whereas the 5 has only wifi". By "signal", I'm assuing that you mean cellular signal. If so, that means your iPhone 4 is still active on your cellular number and your iPhone 5 is not. Contact your carrier to sort out which phone is active on your account.

  • My music will not sync to my ipod it only says revert and I cant open up music i purchased on itunes. I started having this problem when I updated my ipod

    My music will not sync to my ipod it only says revert and I cant open or play music i purchase on itunes. This problem occured when i updated my ipod.
    Thanks

    I also have a 4G ipod touch and a similar problem. Since I updated to the ios5 software any new songs I add to my iTunes don't sync to my ipod main playlist. They show up in the 'recently added' playlist, but not in the main 'songs' section. I fixed the problem once by restoring to factory settings and rather than reinstalling from a backup, I created a new ipod name and synced everything onto my ipod as if it was new.
    This worked until the next new song I added and then the same problem started all over again. If you do reinstall everything as new, you may want to take a screen shot of where all your apps are and make sure all your photos etc are saved, as everything will be from scratch. Hope this helps!

  • Problem when synching computer to ipod

    I have been using Itunes with my ipod nano for over a year. I download songs and have no problems. When I connect to sync it is not recognizing the ipod and then gets an error message. I have followed all of the ipod troubleshooting steps and have deleted and reinstalled itunes and am still experiencing the same issue.

    That doesn’t to be the problem. When I connect the ipod to the computer it says "Itunes has detected an ipod that appears to be corrupted. You may need to restore the ipod before it can be used with itunes. You may also try disconnecting and reconnecting again." I disconnected and reconnected many times, I have restarted, check for updates, and finally restored my ipod. It has deleted everything off of my ipod then I get a do not disconnect message that never goes away. What should I do please advise?

  • Problems with iTunes and my iPod

    When I plug my iPod into my computer, iTunes doesn't automatically load like it used to. Instead, I have to manually open iTunes myself. And when I double click for iTunes to open, I get the following message:
    "The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
    So I clicked OK, and after that iTunes opened by my iPod didn't show up. I tried reinstalling iTunes, but it hasn't worked.
    It also won't charge when plugged into the USB.
    WHAT do I do?

    It would be nice to get some help around here. Isn't
    that what this place is for?
    Just so you know, for future reference, this is a user-to-user board . . . nobody on here is paid to help, and generally, you catch more flies with honey than with vinegar.
    Hope you got your issue worked out.

Maybe you are looking for