Problem when I starting Weblogic Server Under Eclipse Suddenly Stop
Hi everyone:
I've a problem, I'm working with IDE Eclipse 3.2 and weblogic server 8.1 I need to debug the application, when I'm trying to start the server and everything look fine and almost at the end suddenly the server stop with this message:
Stopping Weblogic Server...
Failed to connect to t3://localhost:7001: Destination unreachable; nested exception is:
java.net.ConnectException: Connection refused; No available router to destination
please I need Help.
Thanks in advance
i still haven't found a solution to the problem with the specific setup i originally mentioned (wls 9.0, eclipse 3.2 on solaris/sparc). even after upgrading to wls 9.2, the exact same bug occurs.
in the end, i just gave up on the standalone eclipse 3.2 and started using workshop for weblogic 9.2 that comes bundled with the wls 9.2 installation; and the problem does not occur with that setup.
wl workshop 9.2 is based on eclipse 3.1. so if you want to use regular eclipse with regular wls, then maybe eclipse 3.1 is the most stable version to use with wls. hth.
Similar Messages
-
I am getting an AccessControlException when I start weblogic server 5.1
hi folks,
I am getting an AccessControlException when I start weblogic server 5.1,
this is the exact message
Wed Aug 23 10:04:34 PDT 2000:<I> <WebLogicServer> Invoking T3StartupDef
LocaleSe
tup com.flutter.startup.LocaleSetup with {}
Wed Aug 23 10:04:35 PDT 2000:<E> <WebLogicServer> Failed to invoke
startup class
LocaleSetup=com.flutter.startup.LocaleSetup
java.security.AccessControlException: access denied
(java.util.PropertyPermissio
n user.language write)
at
java.security.AccessControlContext.checkPermission(AccessControlConte
xt.java, Compiled Code)
at
java.security.AccessController.checkPermission(AccessController.java,
Compiled Code)
at
java.lang.SecurityManager.checkPermission(SecurityManager.java, Compi
led Code)
at java.util.Locale.setDefault(Locale.java:340)
at com.flutter.startup.LocaleSetup.startup(LocaleSetup.java:37)
at
weblogic.t3.srvr.StartupThread.runStartup(StartupThread.java:182)
at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java,
Compiled Co
de)
at
weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java
:62)
I have this line in my weblogic.properties file
weblogic.system.startupClass.LocaleSetup=com.flutter.startup.LocaleSetup
please help me with this,
thank you
sudhirThis looks like a policy file problem. You have run into one of the worst
design decisions in Java 2:
http://www.weblogic.com/docs51/techsupport/java12.html#security
Thanks,
Michael
Michael Girdley
BEA Systems Inc
"sg" <[email protected]> wrote in message
news:[email protected]..
hi folks,
I am getting an AccessControlException when I start weblogic server 5.1,
this is the exact message
Wed Aug 23 10:04:34 PDT 2000:<I> <WebLogicServer> Invoking T3StartupDef
LocaleSe
tup com.flutter.startup.LocaleSetup with {}
Wed Aug 23 10:04:35 PDT 2000:<E> <WebLogicServer> Failed to invoke
startup class
LocaleSetup=com.flutter.startup.LocaleSetup
java.security.AccessControlException: access denied
(java.util.PropertyPermissio
n user.language write)
at
java.security.AccessControlContext.checkPermission(AccessControlConte
xt.java, Compiled Code)
at
java.security.AccessController.checkPermission(AccessController.java,
Compiled Code)
at
java.lang.SecurityManager.checkPermission(SecurityManager.java, Compi
led Code)
at java.util.Locale.setDefault(Locale.java:340)
at com.flutter.startup.LocaleSetup.startup(LocaleSetup.java:37)
at
weblogic.t3.srvr.StartupThread.runStartup(StartupThread.java:182)
at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java,
Compiled Co
de)
at
weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java
:62)
I have this line in my weblogic.properties file
weblogic.system.startupClass.LocaleSetup=com.flutter.startup.LocaleSetup
please help me with this,
thank you
sudhir -
Starting Weblogic server with eclipse.
Hi,
I am trying to start the web logic server through Hudson build.I have specified the goals in pom.xml and i am using cargo plugin (maven). When i build using Hudson. It builds the war file and copies to folder so when the weblogic starts it uses that war file. But in my case the the war file is copied to correct location where the server expects it when it starts but when it tries to deploy it takes from the Hudson location where it was created can anyone help me with this? i need some help with this so that when i deploy it picks the correct war file.
I have the pom.xml that i was using.
Thanks in advance.
<plugin>
<groupId>org.codehaus.cargo</groupId>
<artifactId>cargo-maven2-plugin</artifactId>
<version>1.0</version>
<configuration>
<wait>false</wait>
<container>
<containerId>${container.name}</containerId>
<home>${container.home}</home>
<log>${container.server.home}/servers/${container.server.name}/logs/${container.server.name}.log</log>
<output>${container.server.home}/servers/${container.server.name}/logs/${container.server.name}.out</output>
<timeout>600000</timeout>
</container>
</configuration>
<executions>
<execution>
<id>start-container</id>
<phase>pre-integration-test</phase>
<goals>
<goal>start</goal>
<goal>deploy</goal>
</goals>
<configuration>
<home>${container.server.home}</home>
<type>existing</type>
<properties>
<cargo.java.home>${container.java.home}</cargo.java.home>
<cargo.servlet.port>${container.port}</cargo.servlet.port>
<cargo.jboss.configuration>default</cargo.jboss.configuration>
<cargo.rmi.port>1099</cargo.rmi.port>Hope your pom.xml file is not suitable to WebLogic. it is for Jboss.
Let me point you to right link here: https://docs.sonatype.org/display/M2ECLIPSE/Using+Maven+with+application+servers#UsingMavenwithapplicationservers-Weblogic
Change your pom.xml file accordingly and let us know what is the situation for your eclipse.
Edited by: PavanBhavanishekhar on Nov 2, 2010 12:52 PM -
Native VM not supported error when start WebLogic Server on Solaris
I created a weblogic domain and server using configuration wizard from workshop 8.1, the JVM is jdk142_05. When I start weblogic server, get follwing error: native VM not supported. The enviroment is
Solaris.
We used the same jdk started medrec example without problem. Any idea for the possible cause?
Thank any one who can help.
Zhong
uberpeer% ./startWebLogic.sh
JAVA Memory arguments: -Xms256m -Xmx256m -XX:CompileThreshold=8000 -XX:PermSize=32m -XX:MaxPermSize=128m
WLS Start Mode=Development
CLASSPATH=:/rg2/opt/bea/weblogic81/server/lib/weblogic_knex_patch.jar:/rg2/opt/bea/weblogic81/common/lib/log4j.jar:/rg2/opt/bea/weblogic81/server/lib/debugging.jar:/rg2/opt/bea/weblogic81/server/lib/knex.jar:/rg2/opt/bea/weblogic81/javelin/lib/javelin.jar:/rg2/opt/bea/weblogic81/server/lib/wlw-lang.jar:/rg2/opt/bea/jdk142_05/lib/tools.jar:/rg2/opt/bea/weblogic81/server/lib/weblogic_sp.jar:/rg2/opt/bea/weblogic81/server/lib/weblogic.jar:/rg2/opt/bea/weblogic81/server/lib/ant/ant.jar:/rg2/opt/bea/jdk142_05/jre/lib/rt.jar:::/rg2/opt/bea/weblogic81/common/eval/pointbase/lib/pbserver44.jar:/rg2/opt/bea/weblogic81/common/eval/pointbase/lib/pbclient44.jar:/rg2/opt/bea/weblogic81/server/lib/webserviceclient.jar:/rg2/opt/bea/weblogic81/server/lib/webserviceclient+ssl.jar:/rg2/opt/bea/weblogic81/server/lib/xbean.jar:/rg2/opt/bea/weblogic81/server/lib/wlxbean.jar:/rg2/opt/bea/weblogic81/server/lib/xqrl.jar:/rg2/opt/bea/weblogic81/server/lib/netui/netui-compiler.jar:/rg2/opt/bea/weblogic81/server/lib/wli.jar:/rg2/opt/bea/weblogic81/server/lib/fop.jar:/rg2/opt/bea/weblogic81/integration/adapters/sample/lib/sample-eis.jar:
PATH=/rg2/opt/bea/weblogic81/server/bin:/rg2/opt/bea/jdk142_05/jre/bin:/rg2/opt/bea/jdk142_05/bin:/opt/bea/weblogic700/server/lib/solaris:/opt/bea/jdk131_03/jre/bin:/opt/bea/jdk131_03/bin:/rg1/users/zhongw/weblogic/PMDomain:/rg2/opt/bea/weblogic81/workshop:/rg1/users/zhongw/bin:/bin:/usr/bin:/usr/sbin:/usr/java/bin:/usr/openwin/bin:/opt/local/bin:/usr/ccs/bin:/usr/per15/bin:/usr/local/SUNWspro/bin:/usr/local/accurev/bin:/opt/jakarta-ant/bin:/usr/local/accurev/bin:/usr/ccs/bin:/usr/local/bin:/opt/enJin/2.3.1/bin:/usr/java/bin:/usr/openwin/bin:/usr/dt/bin:/rg1/users/zhongw/Borland/JBuilder2005/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
java version "1.4.2_05"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_05-b04)
Java HotSpot(TM) Client VM (build 1.4.2_05-b04, mixed mode)
Starting WLS with line:
/rg2/opt/bea/jdk142_05/bin/java -client -Xms256m -Xmx256m -XX:CompileThreshold=8000 -XX:PermSize=32m -XX:MaxPermSize=128m -native -Xverify:none -da -Dplatform.home=/rg2/opt/bea/weblogic81 -Dwls.home=/rg2/opt/bea/weblogic81/server -Dwli.home=/rg2/opt/bea/weblogic81/integration -Dlog4j.configuration=file:/rg2/opt/bea/weblogic81/common/lib/workshopLogCfg.xml -Dweblogic.management.discover=true -Dweblogic.ProductionModeEnabled= -Dweblogic.security.SSL.ignoreHostnameVerify=false -Dwlw.iterativeDev=true -Dwlw.testConsole=true -Dwlw.logErrorsToConsole=true -Dweblogic.Name=cgServer -Djava.security.policy=/rg2/opt/bea/weblogic81/server/lib/weblogic.policy weblogic.Server
Error: native VM not supported
Stopping Pointbase server...
Pointbase server stopped.I believe this is the error you get when you try to start up a JVM with the commandline option '-native'.
Remove this flag from your startup script and retry.
By the way, it may be that you have the environment variable 'JAVA_OPTIONS' set to '-native' in which case:
(first confirm this is the case)
$ echo $JAVA_OPTIONS
-native
(Then edit the startup script if you get the result above)
add in a line:
# To remove '-native' flag
unset JAVA_OPTIONS
and retry.
I have to confess I don't know what the '-native' flag is actually supposed to do, but my JVM also reports back that this is unsupported. -
Starting Weblogic Server Cluster remotely via VPN
We have a site-to-site VPN setup from our office to our ISP so we can
control our system remotely. We can stop our Weblogic servers (in a
cluster) remotely via the VPN no problem via the "stopweblogic.cmd" command
where we just change the IP address of our remote server. We're having
trouble starting them through the WebLogic console applet. We can bring the
applet up & running, but no luck starting them.
Is there another way to start your weblogic servers (besides using something
like PC Anywhere).
Or is there any documentation that could point to an answer here?
Any suggestions?
Mike Kendzierski
B2BGalaxy.com
1. "myserver" is the name of the server. It doesn't want the name of the
machine the server is on.
2. It is possible that something is wrong in the license file. I've made a
typo when changing the license on my server that prevented weblogic from
starting.
Hope this helps.
"Hilmar" <[email protected]> wrote in message
news:[email protected]..
>
When I start WebLogic server using startweblogic.cmd everything seems tobe okay.
Using the 'Start a new WebLogic server or cluster' command from WebLogicConsole
5.1.0, I get the following error message:
Attempting to start server on the machine running the console using
C:\weblogic\jre1_2\jre\bin\java.exe -mx32m -ms32m -classpath"C:\weblogic\jre1_2\jre\lib\rt.jar;C:\weblogic\jre1_2\jre\lib\i18n.jar;C:\we
blogic\lib\i18n.jar;C:\weblogic\classes\boot;C:\weblogic\eval\cloudscape\lib
\cloudscape.jar"
-Dweblogic.class.path=C:\weblogic\license;C:\weblogic\classes;C:\weblogic\myserver\serverclasses;C:\weblogic\lib\weblogicaux.jar
-Dweblogic.system.discardOutAndErr=true -Djava.security.manager -Djava.security.policy==C:\weblogic\weblogic.policy
-Dweblogic.system.name=kenapp00111 -Dweblogic.system.home=C:\weblogic -Dweblogic.cluster.enable=false
-Dweblogic.cluster.name=mycluster -Dweblogic.system.listenPort=7001 -Dweblogic.system.SSLListenPort=7002
-Dweblogic.cluster.multicastAddress=237.0.0.1 weblogic.Server
$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
Loaded License : C:/weblogic/license/WebLogicLicense.xml
However Unable to start because :
No License found for WebLogic
As well as the fact that: No License found for Tengah
As well as the fact that: No License found for WebLogic/JDBC
As well as the fact that: No License found for Tengah/JDBC
As well as the fact that: No License found for jdbcKona/T3
Is the 'server name' the name of the machine or 'myserver' ? Could therereally
be something wrong with the licence file ?
Thanks for helping !
Hilmar -
Starting WebLogic server from concole
When I start WebLogic server using startweblogic.cmd everything seems to be okay.
Using the 'Start a new WebLogic server or cluster' command from WebLogic Console
5.1.0, I get the following error message:
Attempting to start server on the machine running the console using
C:\weblogic\jre1_2\jre\bin\java.exe -mx32m -ms32m -classpath "C:\weblogic\jre1_2\jre\lib\rt.jar;C:\weblogic\jre1_2\jre\lib\i18n.jar;C:\weblogic\lib\i18n.jar;C:\weblogic\classes\boot;C:\weblogic\eval\cloudscape\lib\cloudscape.jar"
-Dweblogic.class.path=C:\weblogic\license;C:\weblogic\classes;C:\weblogic\myserver\serverclasses;C:\weblogic\lib\weblogicaux.jar
-Dweblogic.system.discardOutAndErr=true -Djava.security.manager -Djava.security.policy==C:\weblogic\weblogic.policy
-Dweblogic.system.name=kenapp00111 -Dweblogic.system.home=C:\weblogic -Dweblogic.cluster.enable=false
-Dweblogic.cluster.name=mycluster -Dweblogic.system.listenPort=7001 -Dweblogic.system.SSLListenPort=7002
-Dweblogic.cluster.multicastAddress=237.0.0.1 weblogic.Server
$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
Loaded License : C:/weblogic/license/WebLogicLicense.xml
However Unable to start because :
No License found for WebLogic
As well as the fact that: No License found for Tengah
As well as the fact that: No License found for WebLogic/JDBC
As well as the fact that: No License found for Tengah/JDBC
As well as the fact that: No License found for jdbcKona/T3
Is the 'server name' the name of the machine or 'myserver' ? Could there really
be something wrong with the licence file ?
Thanks for helping !
Hilmar1. "myserver" is the name of the server. It doesn't want the name of the
machine the server is on.
2. It is possible that something is wrong in the license file. I've made a
typo when changing the license on my server that prevented weblogic from
starting.
Hope this helps.
"Hilmar" <[email protected]> wrote in message
news:[email protected]..
>
When I start WebLogic server using startweblogic.cmd everything seems tobe okay.
Using the 'Start a new WebLogic server or cluster' command from WebLogicConsole
5.1.0, I get the following error message:
Attempting to start server on the machine running the console using
C:\weblogic\jre1_2\jre\bin\java.exe -mx32m -ms32m -classpath"C:\weblogic\jre1_2\jre\lib\rt.jar;C:\weblogic\jre1_2\jre\lib\i18n.jar;C:\we
blogic\lib\i18n.jar;C:\weblogic\classes\boot;C:\weblogic\eval\cloudscape\lib
\cloudscape.jar"
-Dweblogic.class.path=C:\weblogic\license;C:\weblogic\classes;C:\weblogic\myserver\serverclasses;C:\weblogic\lib\weblogicaux.jar
-Dweblogic.system.discardOutAndErr=true -Djava.security.manager -Djava.security.policy==C:\weblogic\weblogic.policy
-Dweblogic.system.name=kenapp00111 -Dweblogic.system.home=C:\weblogic -Dweblogic.cluster.enable=false
-Dweblogic.cluster.name=mycluster -Dweblogic.system.listenPort=7001 -Dweblogic.system.SSLListenPort=7002
-Dweblogic.cluster.multicastAddress=237.0.0.1 weblogic.Server
$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
Loaded License : C:/weblogic/license/WebLogicLicense.xml
However Unable to start because :
No License found for WebLogic
As well as the fact that: No License found for Tengah
As well as the fact that: No License found for WebLogic/JDBC
As well as the fact that: No License found for Tengah/JDBC
As well as the fact that: No License found for jdbcKona/T3
Is the 'server name' the name of the machine or 'myserver' ? Could therereally
be something wrong with the licence file ?
Thanks for helping !
Hilmar -
Starting weblogic server as NT Service.
Hi,
When I start weblogic server at cmdline our classes generate many
messages like "Server started successfully" etc as console output. But
when I start it as a service I dont see any of these. Can I specify an
output file for all the messages when starting the server? If so what is
the exact syntax?
Regards,
BilloHi.
Most of these messages are also in the weblogic.log file. Is this what you
are looking for?
Regards,
Michael
Billo Thomas wrote:
Hi,
When I start weblogic server at cmdline our classes generate many
messages like "Server started successfully" etc as console output. But
when I start it as a service I dont see any of these. Can I specify an
output file for all the messages when starting the server? If so what is
the exact syntax?
Regards,
Billo--
Michael Young
Developer Relations Engineer
BEA Support -
Problem in starting weblogic server as proxy
I am using weblogic server as Proxy to forward the requests to weblogic cluster.
When i bring up the proxy, it works fine, but when i try to access the application deployed in cluster through Proxy, the proxy server crashes with the follwoing error.
I am Pasting my complete logs below.
Setting JVM memory params for server IRISProxy
Using server IRISProxy-specfic java memory arguments: -Xms32m -Xmx200m -XX:SurvivorRatio=4 -XX:TargetSurvivorRatio=80 -XX:MaxPermSize=128m -XX:+DisableExplicitGC -XX:NewRatio=4
WLS Production Mode=true
./startWebLogic.sh[68]: B: not found.
maxfiles=8192
CLASSPATH=/home/weblogic/bea_wli/user_projects/domains/AppSvcDomain/util/CR211812_81sp4.jar:/home/weblogic/bea_wli/user_projects/domains/AppSvcDomain/util/CR235145_81sp4.jar:/home/weblogic/bea_wli/weblogic81/common/lib/CR224719_81sp2.jar:/home/weblogic/bea_wli/weblogic81/common/lib/CR137449_81sp2.jar:/home/weblogic/bea_wli/weblogic81/server/lib/weblogic_knex_patch.jar:/home/weblogic/bea_wli/weblogic81/common/lib/log4j.jar:/home/weblogic/bea_wli/weblogic81/server/lib/debugging.jar:/home/weblogic/bea_wli/weblogic81/server/lib/knex.jar:/home/weblogic/bea_wli/weblogic81/javelin/lib/javelin.jar:/home/weblogic/bea_wli/weblogic81/server/lib/wlw-lang.jar:/home/weblogic/bea_wli/jdk141_05/lib/tools.jar:/home/weblogic/bea_wli/weblogic81/server/lib/weblogic_sp.jar:/home/weblogic/bea_wli/weblogic81/server/lib/weblogic.jar:/home/weblogic/bea_wli/weblogic81/server/lib/ojdbc14.jar:/home/weblogic/bea_wli/weblogic81/server/lib/ant/ant.jar:/home/weblogic/bea_wli/jdk141_05/jre/lib/rt.jar:/opt/jes/policy_agent/IdentityServer/j2ee_agents/config/_home_weblogic_bea_wli_user_projects_domains_AppSvcDomain-IRIS:/opt/jes/policy_agent/IdentityServer/j2ee_agents/lib/agent_tools_2_1.jar:/opt/jes/policy_agent/IdentityServer/j2ee_agents/config/_home_weblogic_bea_wli_user_projects_domains_AppSvcDomain-Admin:/opt/jes/policy_agent/IdentityServer/j2ee_agents/locale:/opt/jes/policy_agent/IdentityServer/j2ee_agents/lib/am_agent_sdk_2_1.jar:/opt/jes/policy_agent/IdentityServer/j2ee_agents/lib/am_agent_filter_2_1.jar:/opt/jes/policy_agent/IdentityServer/j2ee_agents/lib/am_sdk.jar:/opt/jes/policy_agent/IdentityServer/j2ee_agents/lib/am_services.jar:/opt/jes/policy_agent/IdentityServer/j2ee_agents/lib/am_sso_provider.jar:/opt/jes/policy_agent/IdentityServer/j2ee_agents/lib/am_logging.jar:/opt/jes/policy_agent/IdentityServer/j2ee_agents/lib/am_wl70_agent_2_1.jar:::::/home/weblogic/bea_wli/user_projects/domains/AppSvcDomain/util/SecurityClient-v1.0.7.jar:/home/weblogic/bea_wli/user_projects/domains/AppSvcDomain/util/Log4JInitServlet.jar:/home/weblogic/bea_wli/user_projects/domains/AppSvcDomain/util/log4j_IRIS-1.2.4.jar:::/home/weblogic/bea_wli/weblogic81/server/lib/webserviceclient.jar:/home/weblogic/bea_wli/weblogic81/server/lib/webserviceclient+ssl.jar:/home/weblogic/bea_wli/weblogic81/server/lib/xbean.jar:/home/weblogic/bea_wli/weblogic81/server/lib/wlxbean.jar:/home/weblogic/bea_wli/weblogic81/server/lib/xqrl.jar:/home/weblogic/bea_wli/weblogic81/server/lib/netui/netui-compiler.jar:/home/weblogic/bea_wli/weblogic81/server/lib/wli.jar:/home/weblogic/bea_wli/weblogic81/server/lib/fop.jar:/home/weblogic/bea_wli/weblogic81/integration/adapters/sample/lib/sample-eis.jar:
PATH=/home/weblogic/bea_wli/weblogic81/server/bin:/home/weblogic/bea_wli/weblogic81/server/bin:/home/weblogic/bea_wli/jdk141_05/jre/bin:/home/weblogic/bea_wli/jdk141_05/bin:/usr/sbin:/usr/bin:/usr/ccs/bin:/usr/contrib/bin:/usr/local/bin:/opt/hparray/bin:/opt/nettladm/bin:/opt/upgrade/bin:/opt/fcms/bin:/opt/pd/bin:/usr/bin/X11:/usr/contrib/bin/X11:/opt/resmon/bin:/opt/perf/bin:/opt/prm/bin:/opt/mx/bin:/opt/gnome/bin:/opt/wbem/bin:/opt/wbem/sbin:/opt/ignite/bin:/opt/graphics/common/bin:/usr/sbin/diag/contrib:/opt/sec_mgmt/spc/bin:/opt/networker/bin:/opt/sec_mgmt/bastille/bin:/opt/hpnpl//bin:/opt/mozilla:/opt/OV/bin/OpC:/opt/OV/bin:/sbin:/home/root:/util:/home/weblogic/bea_wli/jdk141_05/jre/bin:/usr/local/bin:/usr/local/sbin:.
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
java version "1.4.1.05"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.1.05-030910-01:23)
Java HotSpot(TM) Server VM (build 1.4.1 1.4.1.05-030910-02:49-PA_RISC2.0 PA2.0, mixed mode)
Starting WLS with line:
/home/weblogic/bea_wli/jdk141_05/bin/java -server -Xms32m -Xmx200m -XX:SurvivorRatio=4 -XX:TargetSurvivorRatio=80 -XX:MaxPermSize=128m -XX:+DisableExplicitGC -XX:NewRatio=4 -Dweblogic.security.SSL.trustedCAKeyStore=/home/weblogic/bea_wli/weblogic81/server/lib/cacerts -Dweblogic.security.SSL.ignoreHostnameVerification=true -Dcom.iplanet.coreservices.configpath=/opt/jes/policy_agent/IdentityServer/j2ee_agents/config/_home_weblogic_bea_wli_user_projects_domains_AppSvcDomain-IRIS/ums -Djava.util.logging.config.file=/opt/jes/policy_agent/IdentityServer/j2ee_agents/config/_home_weblogic_bea_wli_user_projects_domains_AppSvcDomain-IRIS/AMAgent.properties -DLOG_COMPATMODE=Off -Dmax_conn_pool=10 -Dmin_conn_pool=1 -Damconfig=AMAgent -Dapp.config.dir=/home/weblogic/upload/appsvcdomain/IRIS/config -Dcom.iplanet.coreservices.configpath=/opt/jes/policy_agent/IdentityServer/j2ee_agents/config/_home_weblogic_bea_wli_user_projects_domains_AppSvcDomain-IRIS/ums -Djava.util.logging.config.file=/opt/jes/policy_agent/IdentityServer/j2ee_agents/config/_home_weblogic_bea_wli_user_projects_domains_AppSvcDomain-IRIS/AMAgent.properties -DLOG_COMPATMODE=Off -Dmax_conn_pool=10 -Dmin_conn_pool=1 -Damconfig=AMAgent -Dapp.config.dir=/home/weblogic/upload/appsvcdomain/IRIS/config -da -Dplatform.home=/home/weblogic/bea_wli/weblogic81 -Dwls.home=/home/weblogic/bea_wli/weblogic81/server -Dwli.home=/home/weblogic/bea_wli/weblogic81/integration -Dlog4j.configuration=file:/home/weblogic/bea_wli/weblogic81/common/lib/workshopLogCfg.xml -Dweblogic.management.discover=false -Dweblogic.management.server=t3://170.63.142.14:8100 -Dweblogic.security.SSL.ignoreHostnameVerify=false -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=true -Dweblogic.security.SSL.trustedCAKeyStore=/home/weblogic/bea_wli/weblogic81/server/lib/cacerts -Dcom.iplanet.coreservices.configpath=/opt/jes/policy_agent/IdentityServer/j2ee_agents/config/_home_weblogic_bea_wli_user_projects_domains_AppSvcDomain/ums -Djava.util.logging.config.file=/opt/jes/policy_agent/IdentityServer/j2ee_agents/config/_home_weblogic_bea_wli_user_projects_domains_AppSvcDomain/AMAgent.properties -DLOG_COMPATMODE=Off -Dmax_conn_pool=10 -Dmin_conn_pool=1 -Damconfig=AMAgent -Dweblogic.Name=IRISProxy -Dweblogic.ProductionModeEnabled=true -Djava.security.policy=/home/weblogic/bea_wli/weblogic81/server/lib/weblogic.policy weblogic.Server
Bad level value for property: com.iplanet.services.debug.level
Bad level value for property: com.sun.identity.agents.logging.level
Bad level value for property: com.sun.am.policy.amFilter.audit.level
<Mar 15, 2006 3:40:33 PM EST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Server VM Version 1.4.1 1.4.1.05-030910-02:49-PA_RISC2.0 PA2.0 from Hewlett-Packard Company>
<Mar 15, 2006 3:40:34 PM EST> <Info> <Management> <BEA-141140> <The managed server is going to contact the admin server at http://170.63.142.14:8100 to check if there exists a running admin server at this URL.>
<Mar 15, 2006 3:40:34 PM EST> <Info> <Configuration Management> <BEA-150017> <This server is being started as a dependent managed server.>
<Mar 15, 2006 3:40:35 PM EST> <Warning> <Configuration Management> <BEA-150033> <The managed server should not be started in development mode.>
<Mar 15, 2006 3:40:35 PM EST> <Info> <Management> <BEA-141107> <Version: WebLogic Temporary Patch for CR211812 01/23/2005 22:15:39
WebLogic Temporary Patch for CR235145 08/16/2005 11:44:59
WebLogic Temporary Patch for CR224719 04/29/2005 16:40:35
WebLogic Temporary Patch for CR137449 02/24/2004 10:48:06
WebLogic Server 8.1 SP2 Fri Dec 5 15:01:51 PST 2003 316284
WebLogic XMLX Module 8.1 SP2 Fri Dec 5 15:01:51 PST 2003 316284
WebLogic Server 8.1 SP2 Fri Dec 5 15:01:51 PST 2003 316284
WebLogic Server 8.1 SP2 Fri Dec 5 15:01:51 PST 2003 316284
WebLogic Integration 8.1 SP2 Thu Dec 11 22:07:14 PST 2003 148883>
<Mar 15, 2006 3:40:35 PM EST> <Info> <Configuration Management> <BEA-150015> <Connecting to the administration server http://170.63.142.14:8100 to retrieve the initial configuration.>
<Mar 15, 2006 3:40:46 PM EST> <Notice> <Log Management> <BEA-170019> <The server log file /home/weblogic/bea_wli/user_projects/domains/AppSvcDomain/IRISProxy/IRISProxy.log is opened. All server side log events will be written to this file.>
<Mar 15, 2006 3:41:29 PM EST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Mar 15, 2006 3:41:29 PM EST> <Notice> <WebLogicServer> <BEA-000328> <Starting WebLogic Managed Server "IRISProxy" for domain "AppSvcDomain">
<Mar 15, 2006 3:41:57 PM EST> <Warning> <HTTP> <BEA-101299> <The servlet-mapping for servlet-name "HttpClusterServlet" will override the default mapping for *.jsp. This can lead to a show code vulnerability.>
<Mar 15, 2006 3:42:06 PM EST> <Notice> <Security> <BEA-090170> <Loading the private key stored under the alias irisqa from the jks keystore file /home/weblogic/bea_wli/weblogic81/server/lib/trustIdentityKeys/iris_qa.jks.>
<Mar 15, 2006 3:42:06 PM EST> <Notice> <Security> <BEA-090171> <Loading the identity certificate stored under the alias irisqa from the jks keystore file /home/weblogic/bea_wli/weblogic81/server/lib/trustIdentityKeys/iris_qa.jks.>
<Mar 15, 2006 3:42:08 PM EST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /home/weblogic/bea_wli/jdk141_05/jre/lib/security/cacerts.>
<Mar 15, 2006 3:42:09 PM EST> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "IRISProxy" for domain "AppSvcDomain" running in Production Mode>
<Mar 15, 2006 3:42:09 PM EST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<Mar 15, 2006 3:42:09 PM EST> <Notice> <WebLogicServer> <BEA-000355> <Thread "ListenThread.Default" listening on port 7001, ip address 170.63.142.29>
<Mar 15, 2006 3:42:09 PM EST> <Notice> <WebLogicServer> <BEA-000355> <Thread "SSLListenThread.Default" listening on port 443, ip address 170.63.142.29>
<Mar 15, 2006 5:02:26 PM EST> <Emergency> <WebLogicServer> <BEA-000209> <ListenThread.run() failed: java.lang.NoSuchMethodError: com.certicom.tls.interfaceimpl.TLSSystem.createServer(Ljavax/net/ssl/SSLSocket;Ljava/io/InputStream;Ljava/io/OutputStream;Ljava/io/Serializable;)Lcom/certicom/tls/TLSConnection;
java.lang.NoSuchMethodError: com.certicom.tls.interfaceimpl.TLSSystem.createServer(Ljavax/net/ssl/SSLSocket;Ljava/io/InputStream;Ljava/io/OutputStream;Ljava/io/Serializable;)Lcom/certicom/tls/TLSConnection;
at javax.net.ssl.impl.SSLSocketImpl.resetConnection(Unknown Source)
at javax.net.ssl.impl.SSLServerSocketImpl.accept(Unknown Source)
at weblogic.t3.srvr.ListenThread.accept(ListenThread.java:739)
at weblogic.t3.srvr.ListenThread.run(ListenThread.java:292)
>
<Mar 15, 2006 5:02:26 PM EST> <Emergency> <WebLogicServer> <BEA-000210> <The WebLogic Server is no longer listening for connections.>
<Mar 15, 2006 5:02:26 PM EST> <Alert> <WebLogicServer> <BEA-000218> <Server shutdown has been requested by <WLS Kernel>>
<Mar 15, 2006 5:02:26 PM EST> <Notice> <WebLogicServer> <BEA-000353> <Thread "ListenThread.Default" stopped listening on port 7001, ip address 170.63.142.29>
<Mar 15, 2006 5:02:26 PM EST> <Notice> <WebLogicServer> <BEA-000353> <Thread "SSLListenThread.Default" stopped listening on port 443, ip address 170.63.142.29>
<Mar 15, 2006 5:02:26 PM EST> <Alert> <WebLogicServer> <BEA-000219> <The shutdown sequence has been initiated.>
Can someone help me in solving this problem
Thanks
KrisI solved this problem by commenting the 8.1 SP4 patches i applied in 8.1 SP2
WebLogic Temporary Patch for CR211812
WebLogic Temporary Patch for CR235145
Once i commented the above patches in the CLASSPATH.
The issue is resolved. -
Error when starting weblogic from forthnet eclipse plugin?
Hi,
I'm getting an error when trying to start my weblogic server from the forthnet eclipse plugin. (However, it works to start the server from a command prompt on the machine it is running on, and also, it works to stop the server from eclipse)
Server and eclipse is running on Windows.
The error reported is:
<2004-sep-01 kl 16:13 CEST> <Warning> <EmbeddedLDAP> <BEA-171520> <Could not obtain an exclusive lock for directory: .\decisionsite81\ldap\ldapfiles. Waiting for 10 seconds and then retrying in case existing WebLogic Server is still shutting down.>
<2004-sep-01 kl 16:13 CEST> <Warning> <EmbeddedLDAP> <BEA-171520> <Could not obtain an exclusive lock for directory: .\decisionsite81\ldap\ldapfiles. Waiting for 10 seconds and then retrying in case existing WebLogic Server is still shutting down.>
<2004-sep-01 kl 16:13 CEST> <Warning> <EmbeddedLDAP> <BEA-171520> <Could not obtain an exclusive lock for directory: .\decisionsite81\ldap\ldapfiles. Waiting for 10 seconds and then retrying in case existing WebLogic Server is still shutting down.>
<2004-sep-01 kl 16:13 CEST> <Warning> <EmbeddedLDAP> <BEA-171520> <Could not obtain an exclusive lock for directory: .\decisionsite81\ldap\ldapfiles. Waiting for 10 seconds and then retrying in case existing WebLogic Server is still shutting down.>
<2004-sep-01 kl 16:13 CEST> <Error> <EmbeddedLDAP> <BEA-171519> <Could not obtain an exclusive lock to the embedded LDAP data files directory: .\decisionsite81\ldap\ldapfiles because another WebLogic Server is already using this directory. Ensure that the first WebLogic Server is completely shutdown and restart the server.>
<2004-sep-01 kl 16:13 CEST> <Critical> <WebLogicServer> <BEA-000364> <Server failed during initialization. Exception:weblogic.server.ServiceFailureException: Could not obtain an exclusive lock to the embedded LDAP data files directory: .\decisionsite81\ldap\ldapfiles because another WebLogic Server is already using this directory. Ensure that the first WebLogic Server is completely shutdown and restart the server.
weblogic.server.ServiceFailureException: Could not obtain an exclusive lock to the embedded LDAP data files directory: .\decisionsite81\ldap\ldapfiles because another WebLogic Server is already using this directory. Ensure that the first WebLogic Server is completely shutdown and restart the server.
at weblogic.ldap.EmbeddedLDAP.ensureExclusiveAccess(EmbeddedLDAP.java:959)
at weblogic.ldap.EmbeddedLDAP.initialize(EmbeddedLDAP.java:221)
at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:814)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:664)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:342)
at weblogic.Server.main(Server.java:32)
>
<2004-sep-01 kl 16:13 CEST> <Emergency> <WebLogicServer> <BEA-000342> <Unable to initialize the server: weblogic.server.ServiceFailureException: Could not obtain an exclusive lock to the embedded LDAP data files directory: .\decisionsite81\ldap\ldapfiles because another WebLogic Server is already using this directory. Ensure that the first WebLogic Server is completely shutdown and restart the server.>
I've tried removing the "EmbeddedLDAP.lok" file, but without luck.Which version of your eclipse? I am using eclipse 3.0 and I am able to start weblogic 8.1 from eclipse.
I did the following steps:
1.create a new domain through weblogic's configuration wizard --> basic weblogic server domain --> Express --> proive the user name and password --> development mode, and sun sdk (or other jdk) --> your new domain name
2. configure weblogic setting in eclipse: preferences --> weblogic --> 8.1, C:\bea\weblogic81, your newly created domain name --> C:\bea\user_projects\domains (domain directory) --> myserver --> admin (or your user name) --> password --> localhost --> 7001
after that, you should be able to click on "start weblogic server" button from toolbar.
Hope my two cents solve your problem. -
Failure extracting WAR classes when starting weblogic server
I installed weblogic6.1 app server on Solaris box. It works fine at first. Then
I moved the unix box to anther place which means it has different IP. Then I have
following exception when I try to start the weblogic server:(I haven't deployed
any thing in the server yet, so it's just a newly installed weblogic server)
Starting WebLogic Server ....
<Mar 8, 2002 10:40:26 AM PST> <Notice> <Management> <Loading configuration file
./config/mydomain/config.xml ...>
<Mar 8, 2002 10:40:35 AM PST> <Notice> <WebLogicServer> <Starting WebLogic Admin
Server "privoserver" for domain "privodomain">
<Mar 8, 2002 10:40:45 AM PST> <Error> <HTTP> <[WebAppServletContext(604746,wl_management_internal2,/wl_management_internal2)]
failure extracting WAR classes
java.io.IOException: Permission denied
at java.io.UnixFileSystem.createFileExclusively(Native Method)
at java.io.File.checkAndCreate(File.java:1162)
at java.io.File.createTempFile(File.java:1247)
at weblogic.servlet.internal.WebAppHelper.extractClassFiles(WebAppHelper.java:71)
Thanks in advance for your reply!
LindenHi
This is a Unix problem, you may check if you have all the permissions.
I suspect that some of the files which may be owned by someone other than user-value and therefore preventing the writting to the
files.
Can you check the files owership under /usr/local/bea/wlserver6.1/config/mydomain/applications/.wlnotdelete to see if any of the
files or subdirectories are owned by someone else, such as 'root' or even under different group?"
Hope this help
JFG
Linden Lu wrote:
I installed weblogic6.1 app server on Solaris box. It works fine at first. Then
I moved the unix box to anther place which means it has different IP. Then I have
following exception when I try to start the weblogic server:(I haven't deployed
any thing in the server yet, so it's just a newly installed weblogic server)
Starting WebLogic Server ....
<Mar 8, 2002 10:40:26 AM PST> <Notice> <Management> <Loading configuration file
/config/mydomain/config.xml ...>
<Mar 8, 2002 10:40:35 AM PST> <Notice> <WebLogicServer> <Starting WebLogic Admin
Server "privoserver" for domain "privodomain">
<Mar 8, 2002 10:40:45 AM PST> <Error> <HTTP> <[WebAppServletContext(604746,wl_management_internal2,/wl_management_internal2)]
failure extracting WAR classes
java.io.IOException: Permission denied
at java.io.UnixFileSystem.createFileExclusively(Native Method)
at java.io.File.checkAndCreate(File.java:1162)
at java.io.File.createTempFile(File.java:1247)
at weblogic.servlet.internal.WebAppHelper.extractClassFiles(WebAppHelper.java:71)
Thanks in advance for your reply!
Linden -
Error When Start Weblogic Server
I build a web application under weblogic, before I package all the project
into a war file, it runs correctly under weblogic. But after I package it
into a war file, when I start weblogic , it said that "Error to load
myapplication".
I checked my application, and found the error was caused by one line in the
web.xml. Because I need to do some initialization when start server. I want
one servlet to be loaded at the time when weblogic server start. There is a
line in the web.xml like this
" <load-on-startup>1</load-on-startup> "
The problem is caused by this line.
If I delete this line or just remove the number "1", the weblogic can start
without error. But my initialization work can not be done.
Could anyone tell me why and how to solve this problem.
Thanks
Jerry Chang
I believe this is the error you get when you try to start up a JVM with the commandline option '-native'.
Remove this flag from your startup script and retry.
By the way, it may be that you have the environment variable 'JAVA_OPTIONS' set to '-native' in which case:
(first confirm this is the case)
$ echo $JAVA_OPTIONS
-native
(Then edit the startup script if you get the result above)
add in a line:
# To remove '-native' flag
unset JAVA_OPTIONS
and retry.
I have to confess I don't know what the '-native' flag is actually supposed to do, but my JVM also reports back that this is unsupported. -
Error WSM-02120 when starting Weblogic Server
Hi All,
I have problem while starting weblogic server, I found this error:
WSM-02120 : Unable to
oracle.wsm.policymanager.
PolicyManagerException: WSM-02120 : Unable to
connect to the Oracle WSM Policy Manager due to the following error
"javax.naming.CommunicationEx
ception [Root exception is java.net.ConnectException:
t3://b00wps01:8889,b00wps01:8888: Destination unreachable; nested
exception is:
java.net.ConnectException: Connection refused; No available router
to destination]".
at
oracle.wsm.policymanager.BeanFactory.getInitialContext(BeanFactory.java:619)
at
oracle.wsm.policymanager.BeanFactory.getJndiObj(BeanFactory.java:648)
I have followed this instruction (OWSM Error Message: WSM-02120 ... Connection refused; No available router to destination (Doc ID 1569900.1) from oracle support, and unfortunately it didn't work.
Anyone can help me to solve this issue?Hi there,
Can you check the JDK version and see the compatible with your weblogic installation ?
You can refer the certification matrix from Oracle to check the compatible version of JDK. Here you go - Oracle Fusion Middleware 12c (12.1.3.0.0) Certification Matrix.
Most probably, this issue will occur when JDK is not compatible with weblogic installation..
Lakshman -
Error Occurs when starting weblogic server 7
Hi Gurus,
I get these errors when i start my weblogic server, i am not able to find the solution.
please some one help me out
Starting WebLogic Server...
<Sep 5, 2006 4:43:24 PM IST> <Notice> <Management> <140005> <Loading configurati
on D:\bea\user_projects\ejbdomain\.\config.xml>
<Sep 5, 2006 4:43:46 PM IST> <Error> <EmbeddedLDAP> <171516> <Could not get excl
usive access to the embedded LDAP data files directory: .\ejbserver\ldap\ldapfil
es>
<Sep 5, 2006 4:43:47 PM IST> <Critical> <WebLogicServer> <000364> <Server failed
during initialization. Exception:weblogic.server.ServiceFailureException: Could
not get exclusive access to embedded LDAP data files due to existing server
weblogic.server.ServiceFailureException: Could not get exclusive access to embed
ded LDAP data files due to existing server
at weblogic.ldap.EmbeddedLDAP.ensureExclusiveAccess(EmbeddedLDAP.java:91
6)
at weblogic.ldap.EmbeddedLDAP.initialize(EmbeddedLDAP.java:209)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:713)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:593)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:281)
at weblogic.Server.main(Server.java:32)
>
<Sep 5, 2006 4:43:47 PM IST> <Emergency> <WebLogicServer> <000342> <Unable to in
itialize the server: Fatal initialization exception
Throwable: weblogic.server.ServiceFailureException: Could not get exclusive acce
ss to embedded LDAP data files due to existing server
weblogic.server.ServiceFailureException: Could not get exclusive access to embed
ded LDAP data files due to existing server
at weblogic.ldap.EmbeddedLDAP.ensureExclusiveAccess(EmbeddedLDAP.java:91
6)
at weblogic.ldap.EmbeddedLDAP.initialize(EmbeddedLDAP.java:209)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:713)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:593)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:281)
at weblogic.Server.main(Server.java:32)
>
The WebLogic Server did not start up properly.
Exception raised:
weblogic.server.ServiceFailureException: Could not get exclusive access to embed
ded LDAP data files due to existing server
at weblogic.ldap.EmbeddedLDAP.ensureExclusiveAccess(EmbeddedLDAP.java:91
6)
at weblogic.ldap.EmbeddedLDAP.initialize(EmbeddedLDAP.java:209)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:713)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:593)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:281)
at weblogic.Server.main(Server.java:32)
Reason: Fatal initialization exception
Throwable: weblogic.server.ServiceFailureException: Could not get exclusive acce
ss to embedded LDAP data files due to existing server
weblogic.server.ServiceFailureException: Could not get exclusive access to embed
ded LDAP data files due to existing server
at weblogic.ldap.EmbeddedLDAP.ensureExclusiveAccess(EmbeddedLDAP.java:91
6)
at weblogic.ldap.EmbeddedLDAP.initialize(EmbeddedLDAP.java:209)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:713)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:593)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:281)
at weblogic.Server.main(Server.java:32)
D:\bea\user_projects\ejbdomain>ENDLOCAL
D:\bea\user_projects\ejbdomain>ENDLOCAL
Thanks in advance
MuraliYou're getting that probably because the WL instance was not shut down properly.
If that's the case, you'll need to remove an ldap lock file (with a .lok extension) in the directory of ldap files (under the server dir) . -
Error when starting weblogic server 10.3.6
hi am having below error when starting my weblogic server am in window xp
C:\mydomain\base_domain\bin>DIR
Volume in drive C is WinXP
Volume Serial Number is F086-F167
Directory of C:\mydomain\base_domain\bin
22/04/2011 11:10 PM <DIR> .
22/04/2011 11:10 PM <DIR> ..
22/04/2011 11:10 PM <DIR> nodemanager
22/04/2011 11:10 PM <DIR> server_migration
22/04/2011 11:10 PM <DIR> service_migration
29/11/2011 10:14 PM 14,273 setDomainEnv.cmd
29/11/2011 10:14 PM 16,221 setDomainEnv.sh
29/11/2011 10:14 PM 3,322 startManagedWebLogic.cmd
29/11/2011 10:14 PM 3,147 startManagedWebLogic.sh
29/11/2011 10:14 PM 5,914 startWebLogic.cmd
29/11/2011 10:14 PM 5,657 startWebLogic.sh
29/11/2011 10:14 PM 2,528 stopManagedWebLogic.cmd
29/11/2011 10:14 PM 2,391 stopManagedWebLogic.sh
29/11/2011 10:14 PM 2,103 stopWebLogic.cmd
29/11/2011 10:14 PM 2,081 stopWebLogic.sh
10 File(s) 57,637 bytes
5 Dir(s) 6,815,825,920 bytes free
C:\mydomain\base_domain\bin>START startWebLogic.cmd
C:\mydomain\base_domain\bin>
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=
128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C
:\PROGRA~1\Java\JDK16~1.0_2\lib\tools.jar;C:\wlserver\server\lib\weblogic_sp.jar
;C:\wlserver\server\lib\weblogic.jar;C:\modules\features\weblogic.server.modules
_10.3.4.0.jar;C:\wlserver\server\lib\webservices.jar;C:\modules\org.apache.ant_1
.7.1/lib/ant-all.jar;C:\modules\net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.
jar;C:\oracle\Middleware\wlserver_10.3\sip\server\lib\weblogic_sip.jar;C:\Oracle
\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\wlserver\common\derby\li
b\derbyclient.jar;C:\wlserver\server\lib\xqrl.jar
PATH=;C:\wlserver\server\native\win\32;C:\wlserver\server\bin;C:\modules\org.apa
che.ant_1.7.1\bin;C:\PROGRA~1\Java\JDK16~1.0_2\jre\bin;C:\PROGRA~1\Java\JDK16~1.
0_2\bin;C:\Program Files\PC Connectivity Solution\;C:\product\11.2.0\dbhome_1\bi
n;C:\product\11.2.0\dbhome_1;C:\forms;C:\DevSuiteHome_1\jlib;C:\Program Files\PH
P;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Commo
n Files\Roxio Shared\DLLShared;C:\Program Files\Common Files\Roxio Shared\DLLSha
red;C:\Program Files\Common Files\Roxio Shared\9.0\DLLShared;C:\Program Files\Co
mmon Files\DivX Shared;c:\Program Files\Java\jdk1.6.0_21\bin;C:\Program Files\Co
mmon Files\Roxio Shared\10.0\DLLShared;C:\Program Files\Common Files\Roxio Share
d\DLLShared;C:\Program Files\Common Files\Roxio Shared\10.0\DLLShared;C:\mywls;C
:\mydomain\base_domain\bin;C:\Program Files\Java\jre6\bin\client;C:\Program File
s\Java\jre6\bin;C:\Program Files\Java\jdk1.6.0_21\jre\bin;C:\Program Files\Java\
jdk1.6.0_21\bin;C:\Program Files\Java\jdk1.6.0_21;C:\Program Files\Java\jre6;C:\
DevSuiteHome_1\forms;C:\DevSuiteHome_1\cgenf61\admin;C:\DevSuiteHome_1\forms;C:\
forms\sms_code.pll;C:\mywls\wlserver;C:\Java\jdk1.6.0_21;C:\wlserver\server\nati
ve\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_21"
Java(TM) SE Runtime Environment (build 1.6.0_21-b07)
Java HotSpot(TM) Client VM (build 17.0-b17, mixed mode)
Starting WLS with line:
C:\PROGRA~1\Java\JDK16~1.0_2\bin\java -client -Xms256m -Xmx512m -XX:CompileThr
eshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=AdminServer
-Djava.security.policy=C:\wlserver\server\lib\weblogic.policy -Xverify:none -ea
:com.bea.wcp... -da -Dplatform.home=C:\wlserver -Dwls.home=C:\wlserver\server
-Dweblogic.home=C:\wlserver\server -Dcommon.components.home=C:\Oracle\MIDDLE~1\
ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.common
s.logging.impl.Jdk14Logger -Ddomain.home=C:\mydomain\BASE_D~1 -Djrockit.optfile=
C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Dorac
le.server.config.dir=C:\mydomain\BASE_D~1\config\FMWCON~1\servers\AdminServer -D
oracle.domain.config.dir=C:\mydomain\BASE_D~1\config\FMWCON~1 -Digf.arisidbeans
.carmlloc=C:\mydomain\BASE_D~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\
mydomain\BASE_D~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:
\mydomain\BASE_D~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\
mydomain\BASE_D~1\servers\AdminServer\tmp\_WL_user -Doracle.deployed.app.ext=\-
-Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.os
soiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djav
a.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=f
alse -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole
= -Dwlw.logErrorsToConsole= weblogic.Server
Exception in thread "main" java.lang.NoClassDefFoundError: weblogic/Server
Caused by: java.lang.ClassNotFoundException: weblogic.Server
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
Could not find the main class: weblogic.Server. Program will exit.
my set is
C:\mydomain\base_domain\bin>SET
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\Desmond\Application Data
CLIENTNAME=Console
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=MADIMAD-B533821
ComSpec=C:\WINDOWS\system32\cmd.exe
FORMS90_PATH=C:\forms
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\Desmond
LOGONSERVER=\\MADIMAD-B533821
NUMBER_OF_PROCESSORS=2
ORACLE_HOME=C:\product\11.2.0\dbhome_1
OS=Windows_NT
Path=C:\Program Files\PC Connectivity Solution\;C:\product\11.2.0\dbhome_1\bin;C
:\product\11.2.0\dbhome_1;C:\forms;C:\DevSuiteHome_1\jlib;C:\Program Files\PHP;C
:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Common F
iles\Roxio Shared\DLLShared;C:\Program Files\Common Files\Roxio Shared\DLLShared
;C:\Program Files\Common Files\Roxio Shared\9.0\DLLShared;C:\Program Files\Commo
n Files\DivX Shared;c:\Program Files\Java\jdk1.6.0_21\bin;C:\Program Files\Commo
n Files\Roxio Shared\10.0\DLLShared;C:\Program Files\Common Files\Roxio Shared\D
LLShared;C:\Program Files\Common Files\Roxio Shared\10.0\DLLShared;C:\mywls;C:\m
ydomain\base_domain\bin;C:\Program Files\Java\jre6\bin\client;C:\Program Files\J
ava\jre6\bin;C:\Program Files\Java\jdk1.6.0_21\jre\bin;C:\Program Files\Java\jdk
1.6.0_21\bin;C:\Program Files\Java\jdk1.6.0_21;C:\Program Files\Java\jre6;C:\Dev
SuiteHome_1\forms;C:\DevSuiteHome_1\cgenf61\admin;C:\DevSuiteHome_1\forms;C:\for
ms\sms_code.pll;C:\mywls\wlserver;C:\Java\jdk1.6.0_21
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PHPRC=C:\Program Files\PHP\
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 23 Stepping 10, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=170a
ProgramFiles=C:\Program Files
PROMPT=$P$G
SESSIONNAME=Console
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\DOCUME~1\Desmond\LOCALS~1\Temp
TMP=C:\DOCUME~1\Desmond\LOCALS~1\Temp
USERDOMAIN=MADIMAD-B533821
USERNAME=Desmond
USERPROFILE=C:\Documents and Settings\Desmond
windir=C:\WINDOWS
aa__COMPAT_LAYER=EnableNXShowUITshifhiwa,
Back again? Nothing learned?
No jdev version?
You should n^know by now that you have to give at least some basic information.
A description of what you tried to do outside the listing would help too.
Timo -
Invalid initial heap size error when starting weblogic server 11g R1
I installed JDeveloper Studio 11.1.1.2.0 . When iItried to start weblogic server 11g R1, I had this message :
starting weblogic with Java version:
java version "1.6.0_14"
Java(TM) SE Runtime Environment (build 1.6.0_14-b08)
Java HotSpot(TM) Client VM (build 14.0-b16, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1.5-3\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Ddomain.home=C:\DOCUME~1\Admin\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1 -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=C:\DOCUME~1\Admin\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\config\FMWCON~1 -Doracle.server.config.dir=C:\DOCUME~1\Admin\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.security.jps.config=C:\DOCUME~1\Admin\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=C:\DOCUME~1\Admin\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\DOCUME~1\Admin\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\config\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=\modules\oracle.ossoiap_11.1.1,\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\DOCUME~1\Admin\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\oracle\store\gmds "-Xms512m -Xmx512m" -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1032\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
Could not create the Java virtual machine.
Invalid initial heap size: -Xms512m -Xmx512m
Process exited.
Please, how can I fixe this error ?For 2 GB machine set the parameters as below:
/ide/bin/ide.conf
AddVMOption -Xmx1232M
AddVMOption -Xms64M
/jdev/bin/jdef.conf
AddVMOption -XX:MaxPermSize=128M
For 3 GB machine set the parameters as below:
/ide/bin/ide.conf
AddVMOption -Xmx1488M
AddVMOption -Xms64M
/jdev/bin/jdef.conf
AddVMOption -XX:MaxPermSize=128M
Maybe you are looking for
-
Traceroute does not work properly with IPMP
I know this question has been asked many times but i didn't find any solution for it. Traceroute does not work with IPMP configured as intended. i have following interfaces configured on my system nxge2: flags=201000842<BROADCAST,RUNNING,MULTICAST,IP
-
I've just moved my macbook over to the imac and upgraded the os t mountain loin. Final cut HD is asking for my serial code but I have lost the box in the process of spring cleaning. I can still access Final cut Hd on the macbook but the imac is askin
-
How can I activate an old version of Dreamweaver on a new computer? (2004 version)
I had Dreamweaver 2004 on my old laptop which recently crashed. I need to transfer the program to my new computer. Online activation has been shut down for this version. How can I activate it?
-
Hi Gurus, I am using Report Scheduling Functionality of SAP. But the report which i am getting is not in appropriate format. Please tell how can i change the layout of Scheduled report which can be fitted in Excel?/ Please revert asap. Thank You
-
Create Events in derived class of CNi4882Dev​ice
Using VB and CW GPIB ActiveX control, we are able to do this: CWGPIB1.NotifyMask = cwGPIBRQS CWGPIB1.Notify Private Sub CWGPIB1_OnGPIBNotify(ByVal mask As Integer) In VC++, i have created a derived class from CNi4882Device. How do I add event capabil