Problem when install oracle 10g client on whitebox enterprise Linux 3
I download oracle-client-10103.tar.bz2 and unzip.
After set environment variable follow instruction
I run runmefirst.sh, system cannot recognize the .o file.
It is possible that you did not download the correct client.
The file name for the 10.1.0.3 client for Linux x86 is ship.client.lnx32.cpio.gz. The Linux x86_64 client name is ship.client.lnxx86-64.cpio.gz .
Similar Messages
-
I met problem when installing Oracle 8.1.6 on Turbo Linux 7.0
I met problem when installing Oracle 8.1.6 on Turbo Linux 7.0.
After setting up environment variables, and successfully
accessed KDE interface, everything was going on well.
The process of installation blocked at 80% in "Database Creation
Process" dialog window.
I have tried two times and got the same result.
The error message is:
Warning: Cannot convert string "-*-Kochi Gothic-medium-r-normal-
*-*100...
Help!I have done some oracle installations over RedHat 7.0 (not certificated):
Let's check some things:
1- You must have changed very few parameters on your shm.h sem.h files which are in /usr/include/linux directory.
2- You need to upgrade the glibc and libstdc libraries (.rpm)
3- You must have installed the jre116_v5 on /usr/jre and made a symbolic link like this
ln -s /usr/jre/jre116_v5 /usr/local/jre
4- You must include in the CLASSPATH parameter the jre116_v5 directory. It should look something like this
CLASSPATH=/usr/jre/jre116_v5:$ORACLE_HOME/jlib
5- Be sure to create and export all the parameters in your .bash_profile.
6- Run the ./runInstaller.sh in a terminal window inside the Xwindow.
You can find the jre116_v5 in www.backdown.org
I hope these tips help you
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by xx:
Hi every body
when I run ./runInstaller from cdrom
I get this messages :
Initializing Java Virtual Machine from /usr/local/jre/bin/jre.Please wait ...
Error in CreateOUIProcess ():-1
: Bad Address
I use JDK-1-1-6.
Thx<HR></BLOCKQUOTE>
null -
Steps to install Oracle 10g on Red Hat Enterprise Linux 4 AS
Hi Friends,
I want to install oracle 10g on Red Hat Enterprise Lnux 4 AS. Can anyone give me steps how to install oracle 10g on it? My machine configuration Processor 2.66ghz Intel, Memory 1024 MB , HDD 160 GB, 845 mother board.In addition to the excellent suggestion by Paul, you may want to look at the internet resources such as
http://www.puschitz.com
http://ivan.kartik.sk
http://www.dizwell.com
each of which as Oracle install on Linux cookbooks. -
Problem when installing oracle 10g on RHEL-4
greetings,
i have been trying to install oracle 10g on my linux machine for the past 10 days, everytimje i do all the steps and change the kernel parameters but when i start the runinstaller file. i get the folloeing error.
I don't know what this error is or why is it happening
you can find a snapshot of the error on the following link
http://www.4shared.com/dir/4180305/6152dc22/Oracle_errors.html
also another error is arising when i log in to the linux box with the user oracle... i have been having these errors for the past 10 days and i reached to the point where my knowledge won't help me more than ur experiences.
a snapshot of this error also is available in the above linkWhile I understand a picture is worth a thousand words, I backed off from the site as soon as it started providing active ads and spy-ware-like indications. If you want help (from me at least) please describe the symptoms.
You could also use the following sites to help with the install:
http://www.puschitz.com and http://ivan.kartik.sk -
Please help me, a problem when install oracle 10g on the solaris 10
currently, I am installing the oracle 10g on the solaris 10, I am using DHCP and
my computer has no hostname, the following is copied from the 10g document,
When you run Oracle Universal Installer, an error may occur if name resolution is not set up. To avoid this error, before you begin installation, you must ensure that host names are resolved only through the /etc/hosts file.
To ensure that host names are resolved only through the /etc/hosts file:
1.
Verify that the /etc/hosts file is used for name resolution. You can do this by checking the hosts file entry in the nsswitch.conf file as follows:
# cat /etc/nsswitch.conf | grep hosts
The output of this command should contain an entry for files.
2.
Verify that the host name has been set by using the hostname command as follows:
# hostname
The output of this command should be similar to the following:
myhost.mycomputer.com
currently, when I use hostname command, it is unknown, what should I do to add
my hostname? thanksSince this is related to Solaris, you will most likely get a better/faster response on a Sun Solaris forum rather than here.
Srini -
I can't install Oracle 10g Client in x86-64(Intel EM64T)
Dear All,
Recently, I tried to install the Oracle 10g client in Redhat Enterprise Linux 4.0 with x86-64 (Intel EM64T) platform. As I know,that is either Oracle 9i or Oracle 10g has been certified to Redhat AS 3.0 operating system.
How can I install Oracle 10g normally under all x86-64 platforms? Or, When does Oracle to release out the patch for all x86-64 versions?Please reffer to Installation section.
Database Installation -
Problem faced when installing oracle 10g
i faced this problem when intalling oracle 10g in windows xp. this dos prompt opens for 5 min. and then it get closed..after tht nuthing happens.
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2. Actual 5.1
Passed
Checking monitor: must be configured to display at least 256 colors. Actual 4
294967296 Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from C:\DOCUME~1\ADMINI~1\LOCALS~
1\Temp\OraInstall2006-09-02_03-43-19AM. Please wait ...Check the directory read-write permission and the space on the C:\ Drive C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2006-09-02_03-43-19AM.
Actually Oracle Installer might be trying to create log file and due to above two reason not able to proceed. -
Cant install oracle 10g release 2 on unbreakable linux
i have being trying to install oracle 10g re 2 on unbreakable linux.after installation i open the url for bot em/isqlplus and it works.but after restarting the system i type the command
emctl start dbconsole
it says command not found
pls help me any 1.There is so much you aren't telling us. For example, if you created a user "oracle" to be the Oracle software owner and install the Oracle software with, there will be a directory named /home/oracle. Inside this directory will be a file called .bash_profile. You can put lines like export ORACLE_HOME=, export ORACLE_BASE= and export ORACLE_SID= so that your environment is set up when you login. Jeff Hunter has a lot of information like this on his website. Check it out.
Tom -
Patches for Installing Oracle 9i on Red Hat Enterprise LINUX 3.0 AS
I recently purchased An Oracle Database Enterprise Edition � Trial License.
I am attempting to install Oracle 9i on Red Hat Enterprise Linux Advanced Server 3 (RHEL AS 3).
After several unsuccessful attempts and consultation with the FAQs available on the Oracle site I have discovered
that it can not be installed without the following patches.
P3095277_9204_LINUX.zip
P3238244_9204_LINUX.zip
P2617419_210_GENERIC.zip
P3006854_9204_LINUX.zip
P3119415_9204_LINUX.zip
Can anyone tell me how I can aquire these patches?
This is for an eval of the product on the platform mentioned above. If I can not complete a successful install,
there is no way for my company to evaluate the product
and eventually purchase it.
You can contact me at this email address [email protected]Daer suneetkapoor:
I am looking for P3006854_9204_LINUX.zip in order that can be properly able to install oracle9i on Linux AS 3. And I saw you to reply the message on forum that you can share the patch. Would you mind if you can send an email with the patch for me immediately, I will greatly appreciate it.
thanks you
regards
ellery
PS: My email address is [email protected] -
Display Problem while installing Oracle 10g on RHEL 5
All,
I'm in the process of installing Oracle 10g R2 on RHEL4, when i'm trying to issue ./runInstaller i'm getting the below error.
I could get the xclock on the host, even then i'm getting below display error, could any one please help me to resolve this ?
e@dhcppc6 database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-11-18_02-21-10PM. Please wait ...[oracle@dhcppc6 database]$ Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.<clinit>(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(Unknown Source)
at java.awt.Window.init(Unknown Source)
at java.awt.Window.<init>(Unknown Source)
at java.awt.Frame.<init>(Unknown Source)
at oracle.ewt.popup.PopupFrame.<init>(Unknown Source)
at oracle.ewt.lwAWT.BufferedFrame.<init>(Unknown Source)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.<init>(OiocOneClickInstaller.java:378)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:2091)
[oracle@dhcppc6 database]$export DISPLAY=<hostname>:0
Are you running from the same terminal or connecting remotely?
If connecting remotely, you need a Xserver running on the client machine. -
ORA-12157 when installing Oracle 10g on Fedora 5?
Hi, Im installing Oracle 10g on Fedora 5, I did it once, but when I tried to set it up again I
got this error on the last part of the install...
ORA-12157: TNS: internal network communication error
Anybody know what might cause this?
I think I have installed all required RPMs and set environment variables, kernel parameters,
created oracle users and groups as needed, but still get the above error. I searched the error and some claim it is a problem using newer glibc 2.4.4, so I tried installing on Fedora 4 and had the same error even with glibc 2.3???
Thanks so much,
JonOracle Database 10g Release 2 (10.2.0.1) Installation On Fedora Core 5 (FC5 X86) Step by Step
This is a Server Installation with a minimum of 2G swap, secure Linux disabled and the following package groups installed:
Editors
Graphical Internet
Administration Tools
Base
X Window System
System Tools
Server Configuration Tools
GNOME Desktop Environment
Development Libraries
Development Tools
Legacy Development Support
Legacy Server Support
Alternative installations may require more packages to be loaded, in addition to the ones listed below.
Download Software
Unpack Files
Hosts File
Set Kernel Parameters
Setup
Installation
Post Installation
Download Software
Download the following software:
Oracle Database 10g Release 2 (10.2.0.1) Software
openmotif21-2.1.30-14.i386.rpm
Unpack Files
Unzip the files:
unzip 10201_database_linux32.zipYou should now have a single directory containing installation files. Depending on the age of the download this may either be named "db/Disk1" or "database".
Hosts File
The /etc/hosts file must contain a fully qualified name for the server:
<IP-address> <fully-qualified-machine-name> <machine-name>Set Kernel Parameters
Add the following lines to the /etc/sysctl.conf file:
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
# semaphores: semmsl, semmns, semopm, semmni
kernel.sem = 250 32000 100 128
fs.file-max = 65536
net.ipv4.ip_local_port_range = 1024 65000
net.core.rmem_default=262144
net.core.rmem_max=262144
net.core.wmem_default=262144
net.core.wmem_max=262144Run the following command to change the current kernel parameters:
/sbin/sysctl -pAdd the following lines to the /etc/security/limits.conf file:
* soft nproc 2047
* hard nproc 16384
* soft nofile 1024
* hard nofile 65536Add the following line to the /etc/pam.d/login file, if it does not already exist:
session required /lib/security/pam_limits.soDisable secure linux by editing the /etc/selinux/config file, making sure the SELINUX flag is set as follows:
SELINUX=disabledAlternatively, this alteration can be done using the GUI tool (Desktop > System Settings > Security Level). Click on the SELinux tab and disable the feature.
Setup
Install the following packages:
# From Fedora Core 5 DVD
cd /media/dvd/Fedora/RPMS
rpm -Uvh setarch-*
rpm -Uvh --force tcl-*
rpm -Uvh libXp-*
rpm -Uvh openmotif-2*
rpm -Uvh compat-db-*
rpm -Uvh compat-libstdc++-33*
rpm -Uvh compat-libf2c-32-*
rpm -Uvh compat-gcc-32-*
rpm -Uvh libaio-*
rpm -Uvh compat-gcc-32-c++-*
rpm -Uvh compat-libstdc++-296*
rpm -Uvh compat-libgcc-296*
# From download
rpm -Uvh openmotif21-2.1.30-14.i386.rpmCreate the new groups and users:
groupadd oinstall
groupadd dba
groupadd oper
useradd -g oinstall -G dba oracle
passwd oracleCreate the directories in which the Oracle software will be installed:
mkdir -p /u01/app/oracle/product/10.2.0/db_1
chown -R oracle.oinstall /u01Login as root and issue the following command:
xhost +<machine-name>Edit the /etc/redhat-release file replacing the current release information (Fedora Core release 5 (Bordeaux)) with the following:
redhat-4Login as the oracle user and add the following lines at the end of the .bash_profile file:
# Oracle Settings
TMP=/tmp; export TMP
TMPDIR=$TMP; export TMPDIR
ORACLE_BASE=/u01/app/oracle; export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/product/10.2.0/db_1; export ORACLE_HOME
ORACLE_SID=TSH1; export ORACLE_SID
ORACLE_TERM=xterm; export ORACLE_TERM
PATH=/usr/sbin:$PATH; export PATH
PATH=$ORACLE_HOME/bin:$PATH; export PATH
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib; export LD_LIBRARY_PATH
CLASSPATH=$ORACLE_HOME/jre:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib; export CLASSPATH
if [ $USER = "oracle" ]; then
if [ $SHELL = "/bin/ksh" ]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
fiInstallation
Log into the oracle user. If you are using X emulation then set the DISPLAY environmental variable:
DISPLAY=<machine-name>:0.0; export DISPLAYStart the Oracle Universal Installer (OUI) by issuing the following command in the database directory:
./runInstallerEnter the appropriate ORACLE_HOME and name then continue with the installation.
During the installation, before the linking phase, edit the contents of the "$ORACLE_HOME/bin/gennttab" file, amending the following entries:
# Change this...
LIB=`$ECHO ${TtoLIB} | $SED 's/ /\\
/g' | $GREP "^${T}:" | $AWK -F: '{print $2}'`
INI=`$ECHO ${TtoINI} | $SED 's/ /\\
/g' | $GREP "^${T}:" | $AWK -F: '{print $2}'`
BAS=`$ECHO ${TtoBAS} | $SED 's/ /\\
/g' | $GREP "^${T}:" | $AWK -F: '{print $2}'`
# To this...
LIB=`$ECHO ${TtoLIB} | $SED 's/ /\n/g' | $GREP "^${T}:" | $AWK -F: '{print $2}'`
INI=`$ECHO ${TtoINI} | $SED 's/ /\n/g' | $GREP "^${T}:" | $AWK -F: '{print $2}'`
BAS=`$ECHO ${TtoBAS} | $SED 's/ /\n/g' | $GREP "^${T}:" | $AWK -F: '{print $2}'`If you don't do this the ntcontab will hang indefinitely during the linking phase.
Post Installation
Edit the /etc/redhat-release file restoring the original release information:
Fedora Core release 5 (Bordeaux)Finally edit the /etc/oratab file setting the restart flag for each instance to 'Y':
TSH1:/u01/app/oracle/product/10.2.0/db_1:Y
Ref.: http://www.oracle-base.com/articles/10g/OracleDB10gR2InstallationOnFedora5.php -
Problem to install oracle 10g on linux
Hi,
I want to install Oracle 10g on Linux
(I have Linux X76CLLCFAUU 2.6.18-194.17.1.el5 #1 SMP Mon Sep 20 07:12:06 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux)
, when i run ./runInstaller, i have the following error , do you known what is the problem :
Démarrage d'Oracle Universal Installer...
Vérification des exigences du programme d'installation...
Vérification de la version du système d'exploitation : il doit s'agir deredhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Echec <<<<
Fermeture d'Oracle Universal Installer ; le journal de cette session figure à l'emplacement /tmp/OraInstall2010-11-17_05-03-15PM/installActions2010-11-17_05-03-15PM.logHello,
Vérification de la version du système d'exploitation : il doit s'agir deredhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Echec <<<<So, when the Installer checked the OS Release, it didn't find the correct one.
The message said that you should have one of this OS:
Redhat-3, SuSE-9, Redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2As previously posted, you should check from the Installation Guide that you have the right OS requirements before running the Installer.
Hope this help.
Best regards,
Jean-Valentin -
Gives ORA-12560: TNS: protocol adapter error when installing oracle 10g
I tried to install oracle 10g r2 in server 2008. but it gives ORA-12560: TNS: protocol adapter error when installing. how I can fix this issue??? please help me ASAP. because its urgent.
thanks in advance.
chamaraWelcome to the forums !
Pl indicate which version of 10g you are installing and on which version of Win 2008. Neither 10gR1 nor 10gR2 are certified to be installed on Win 2008 R1, AFAIK.
For 10gR2, only 10.2.0.5 is certified for Win 2008 R2 - see MOS Doc 1173433.1 (How to Install Oracle 10.2.0.5 on MS Windows 7 / Windows 2008R2)
Also see MOS Doc 740926.1 (Where can I find the Database / Client software to download for Microsoft Vista, or Windows 2008R1?).
Both 10gR1 and 10gR2 are now in extended support - is there a reason you are not using 11gR2 ?
HTH
Srini -
Error message when installing Oracle 10g on Windows XP Professional
Hello,
I need help installing oracle 10g database. When I attempt to run the installation from the setup.exe icon, I get a message that says
"Error in writing to directory C:\Documents and Settings\Owner\Local Settings\Temp\OraInstall2007-04-29_01-19-29PM. Please ensure this directory is writable and has atleast 45Mb of disk space. Installation cannot continue."
When I try to open the installation from the Autorun icon, it points to an innability to find setup.exe and when I go back to Setup.exe, it gives me the above error. Everytime I try to run the installation and it fails, the installation leaves a folder in my Temp folder with the above format. Any help would be appreciated. Thank you.I do have administrative privilege on my computer and I have plenty of space. I have 80gb of free space. What do I do to successfully install the software without incurring those messages I displayed in my first thread?
-
ACL Error when install Oracle 10G on Windows XP
I tried to install Oracle 10G Personal Edition on my Windows XP box. I see the following error in the log file:
INFO: Calling Action w32OcxRegActions10.2.0.0.0 RegisterOCX
OcxPath = C:\oracle\product\10.2.0\db_1\oraconfig\oraconfigps10.dll
WorkingDir = C:\oracle\product\10.2.0\db_1\oraconfig
INFO: Calling Action SpawnActions10.1.0.2.0 Spawn
installcommand = "C:\oracle\product\10.2.0\db_1\oraconfig\ocfgperm" -aa {A1F205B4-4418-11D2-B2F1-00805FC19E2E} set ORA_DBA permit
deinstallcommand = null
WaitForCompletion = true
INFO:
INFO: Start output from spawned process:
INFO: ----------------------------------
INFO:
INFO: ERROR: Cannot add user to application access ACL.
No mapping between account names and security IDs was done.(534)
INFO: End output from spawned process.
In addition if I try to create a DB later via command line or via the DB Config tool I get all these windows dialogs popping up saying: "Oracle SQL*PLUS has encountered a problem and needs to close. We are sorry for the inconvenience."
Any ideas what might be wrong with my installation?
DavidHi David,
i got the same error on a Windows 2003 Server. At this time no password was set for the Administraor account!.
After setting a password for the Administraor i could install the SW withaout any Problem!
Rudi
Maybe you are looking for
-
We would like to add Dynamic Color Swatch. does anybody know the easier way to do it? Our Product example: http://www.whitneyeve.com/bottoms/skinny-sweats Thank you.
-
Caps lock stuck on PSE 12 I already reset preferences and reset tool
I've tried resetting the type tool and reseting my preferences on relaunch and Its still stuck in CAPs lock ... cannot add text to my layouts in lowercase lowercase works on other applications thanks for any advice
-
When I try to work with thhe publish window of lightroom cc, I am told that I do not have permissions to perform operations (remove picture, etc.). I also notice that when the particular picture is selected, another show in its place, and I cannot ch
-
Hi, in Java developing I am using for everey new class a new file. Is it usual in ABAP to use for every local class a new include? I tried it and get in real problems. I wrote two classes in different includes. Both classes were using each other. I
-
I'm trying to create a tag cloud and want it to fit within a given canvas. The idea is to create a tag cloud using the snippet below, and then scale it to fit within the enclosing canvas. <mx:Canvas> <flexlib:FlowBox id="tagContainer" wi