Problem when installing a new version sdk into flex builder 3

i downloaded flex sdk 3.4.0 and unzipped it under the "sdks" floder,i think there should be an "Add" button to let me select it,but the button was gone.
any help please?

Hi Matt,
Following your observation I have copied the folders:
/templates/client-side-detection
/templates/client-side-detection-with-history
/templates/express-installation
/templates/express-installation-with-history
/templates/no-player-detection
/templates/no-player-detection-with-history
from Flex sdk 3.3 to Flex sdk 4 and that solved the issue.
Thanks a lot for your help.

Similar Messages

When installed a new version of firefox my computer crashed. Can I run on the one that is still on my computer?

I installed the new version of firefox, like requested. When went to boot up again, it crashed and I could only boot up on safemode. Then I did not have my printer or sound available either. Also did not have a version to restore to, like I had in the past. A friend told me to go to run and uncheck all startup menu and reboot. I did and here I am with another request to install a new version of firefox. Very afraid it will crash again. I have Windows 7

Please update to Firefox 19. If it crashes, come back here and we will give you information on how to get the crash Id's so we can fix what is making it crash.

Will updated version to the Store remove old save state on device when installing to new version?

So let's say I have installed an app from the app store and it's version 1.0 and it used save states to save my personal best score, will that save state and score be removed when I install an updated version (1.1)?
I'm asking becuase I'm about to start using save states and need to know what way to save to keep the original save state through the different versions that might come, so it's not erased every time.

Ok, thanks

2715 Error when installing a newer version of iTunes

I have been trying to solve this problem for about 10 months and I finally solved it tonight. I thought I would post the solution just in case anyone hit the same error, especially since it appears to be rare.
Here is the error: “The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2715.”
My problem was that every time I tried to install the latest update for iTunes, it would almost completely through the install, then throw this error and stop. It wasn't a killer until version 7.4 when I could no longer buy songs on iTunes (I was still on 7.0).
Uninstalling and reinstalling iTunes had no effect.
The solution was to:
1. uninstall iTunes from Add/Remove Programs
2. Uninstall ALL Apple software including “Apple Mobile Device Support”, Apple Updates, all iPod entries, and Quicktime
a. In my case, some of them threw fatal errors and could not be romoved. The next steps took care of the rest of them.
3. Searched my hard drive to find every folder related to Apple, iPod, or Quicktime that was left from the poor uninstalls. I found files still lying around in the following folders and deleted everything related to iPod, Apple, or Quicktime
a. “Documents and Settings\All Users\Application Data\”
b. Program Files\
4. Next, I went into the Registry with RUN=>REGEDIT
5. Using RegEdit, I searched for every entry for “Apple Mobile Device Support” and deleted every key and subkey
6. I also removed every key related to “Apple Inc.” and “Apple Computer Inc.”
7. Reinstall the latest version of iTunes from scratch
FINALLY, this fixed the problem. The short version is I had to uninstall every piece of Apple software and update that could be removed, then remove every Apple folder on my harddrive, then delete every Apple entry in my registry, then reinstall iTunes.
All my playlists were still there. All I had to do was re-authorize my computer (automatic when I tried to play a song from my library) and then all was well again with the latest (7.4) version of iTunes.
Hope this helps someone.
Rich
[email protected]

Answer is in the original post.

Saved IRs lost when installing a new version of an application

Hello,
is there any documented solution for the following problem:
The client has saved some IR. Now a new application version is installed via script using the apex_application_install api.
The application_id of the exported version and the imported version are the same, i.e.200. The workspace_ids aren't the same.
So all reports the client saved are lost.
I found the solution http://www.talkapex.com/2009/10/saving-saved-interactive-reports-when.html
and adapted it a bit because it didn't work for me.
BEGIN
FOR x IN (SELECT a.ID, a.name, a.session_id,a.updated_on,
                   b.interactive_report_id
              FROM apex_040000.wwv_flow_worksheet_rpts a,apex_application_page_ir b
             WHERE a.flow_id = 200
               AND a.page_id = b.page_id -- Linking is done via the page so please be aware of any IR page changes
               AND b.application_id = a.flow_id
               AND a.worksheet_id != b.interactive_report_id
               and a.status = 'PRIVATE'
               and a.session_id is null
               and A.UPDATED_ON = (SELECT max(aa.updated_on)
                  FROM apex_040000.wwv_flow_worksheet_rpts aa
                 WHERE aa.flow_id = a.flow_id
                   AND aa.page_id = b.page_id -- Linking is done via the page so please be aware of any IR page changes
                   AND aa.worksheet_id != b.interactive_report_id
                   and aa.status = 'PRIVATE'
                   and aa.session_id is null
                   and aa.name=a.name)
               and not exists(select aa.id from apex_040000.wwv_flow_worksheet_rpts aa where aa.flow_id = a.flow_id
                   AND aa.page_id = b.page_id -- Linking is done via the page so please be aware of any IR page changes
                   AND aa.worksheet_id = b.interactive_report_id
                   and aa.status = 'PRIVATE'
                   and aa.session_id is null
                   and aa.name=a.name))
LOOP
    UPDATE apex_040000.wwv_flow_worksheet_rpts
       SET worksheet_id = x.interactive_report_id
     WHERE ID = x.ID;
END LOOP;
END;
commit;This works correctly but this isn't documented and must be run as SYSTEM or a user with SYSTEM level access.
Is there any other solution?
I also tried this http://joelkallman.blogspot.com/2010/07/where-did-my-saved-interactive-reports.html
(apex_application_install.set_offset( p_offset => 1573299003458268419 );)
but couldn't make it work.
I use APEX 4.0.2.
Thank's.
Kirsten

The script posted by Kirsten did work for me on APEX 4.1 (just need to change APEX Schema to apex_040100). Thanks a lot for sharing.
But I have same question - is this approach save to restores users' private reports?
If this is that easy, why it is not included in the application installation?
Regards
Ivan

To install the new version of adobe muse (german version).

I have problems to install the new version of muse (german version). Everytime comes a sign which says: The application could not be installed because the installer file is damaged. Ask the application author is a new installation file.

Could you please uninstall the copy of Muse from your machine (In case of Mac, make sure it is deleted from Trash as well) and use the following link to download and install a fresh copy of Adobe Muse :
Mac : http://www.adobe.com/go/muse_latest_mac
Windows : http://www.adobe.com/go/muse_latest_win
Or
Please follow the steps mentioned in this document :
http://helpx.adobe.com/muse/kb/installer-file-damaged.html
Hope this helps.
Regards
Rajshree

When the message arrives, the message tone sound that many times. How this problem can be solved? I installed the new version, but the problem is not resolved, the future is to be taken into account in the new version of this?

When the message arrives, the message tone sound that many times. How this problem can be solved? I installed the new version, but the problem is not resolved, the future is to be taken into account in the new version of this?

I'm not sure I understand the question, is the message tone going more then once?
Turn off repeat message alert here:
settings > notifications > messages > repeat alert > never
Some people have found this does not stop the repeat miessage tone,
if you are one of those then I suggest you contact Apple:
http://www.apple.com/feedback/iphone.html
They may not respond, but hopefully will fix in uodate if enough people complain.

I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your help

It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.

After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is su

After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is suggested; however, I can't do that because of my company's IT policies. Is there any way to solve this problem WITHOUT a complete reinstall? Thank you!
== This happened ==
Every time Firefox opened
== I installed a new version ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648)

If you can't reinstall Firefox yourself then you need to contact your IT department and ask them to check the Firefox installation.
It is possible that some files got broken with the latest update.

When I update my Elements 2 to Elements 11, can I just install the new version?

When I update my Elements 2 to Elements 11, can I just install the new version, or do I need to uninstall the old version first?
Also, can I bring version 2 files into version 11?

you don't need to uninstall your older version.
you can migrate your catalog: http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html

I have been using itunes all day and then it wanted me to install a newer version. When I did it said I can't because it's missing mdsvr80 or something so i downloaded that now it has another error. How do I get itunes back the way it was or to work?

I have been using itunes all day and then it wanted me to install a newer version. When I did it said I can't because it's missing mdsvr80 or something so i downloaded that now it has another error. How do I get itunes back the way it was or to work?

See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562

TS5376 I'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly.

'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly. I have even done a repair to see if that works and it has not. Has anyone else found a new way to get it working?

Try Troubleshooting issues with iTunes for Windows updates.
tt2

I want to install the new version of Adobe Flash on my Mac. I download it and when I go to install a security screen comes up with my user name. It asks for my password and no matter what I put it won't recognize the password and let me install the player

I am trying to install the new version of Adobe Player on my Mac. I download it but can't install it. When I go to install it I get a security screen with my user ID and it asks for my password. I have reset my password but still can't get it to be accepted so I can't download the player

Hello,
Please see What userid & password do I need to install Flash Player?.
Maria

I have a problem when updated the new release of iphoto version(11 jun 2012). After that I cannot open any photo libraries and program is error.

I have a problem when updated the new release of iphoto version(11 jun 2012). After that I cannot open any photo libraries and program is error. I must to force quit iphoto window. There are any fixed bug update.

If you have no photos:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library' and start.
Regards
TD

Hi. I was trying to open some pdf files and got a message my adobe reader was deinstalled. I installed a new version of Adobe Reader for Mac and when trying to open a PDF file I am getting a message in a foreign language. Any suggestions?

Hi. I was trying to open some pdf files and got a message my adobe reader was deinstalled. I installed a new version of Adobe Reader for Mac and when trying to open a PDF file I am getting a message in a foreign language. Any suggestions?

Are you launching Pages from an icon in your Dock? Installing the update does not change the Dock icons & it does not remove the older versions. Go to your Applications folder & launch the new Pages from there.

Problem when installing a new version sdk into flex builder 3

Similar Messages

Maybe you are looking for