Problem when Nano connected to USB at Boot for PC
I have a Nano 4GB than for some strange reason, when plugged into a USB port (2.0), frequently causes the computer to either delay the boot process (~ 1 min+) or (rarely) cause the computer to reboot during the device initialization process. If I unplug the iPod, the problem goes away. The Event Viewer is clean. The computer is otherwise wicked fast, so the delay is quite noticable.
I am using a dock instead of the straight plug but my understanding is that the dock is passive.
Any thoughts as to what might cause this???
Fuzzylogik
Check your computer's BIOS settings and look at the boot order.
It might be trying to boot your machine from the iPod, as it may be seeing it as an external USB hard drive.
Many new machines can boot from USB devices now.
Similar Messages
-
Sorry about the long title.....its my first post.
My kid just got a brand new iPod 5th generation (today from Santa) and it won't power up or charge. The only response is when I connect the USB and press the power button or front button the Battery appears with red line on left and lightning symbol below. There is no other response at all no matter what I do, including holding both buttons down for extended period. My other kid got one and it works perfectly.....I have interchanged usb cables ports etc. but still no response....I would really appreciate any help.Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Make an appointment at the Genius Bar of an Apple store since you have a hardware problem with the iPod. This is because as you said the same cable works with another iPod.
Apple Retail Store - Genius Bar -
My Macbook is getting freeze when i connect with USB cable
After I updated to OSX 10.7.4 Lion (Default 64bit).I try to use the touch panel device that I using before. But it keeping occur system freeze when I connect the usb cable.
Sometime I can operate it normal but the percentage is very low.
What 's the problem on?Could be a bad cable or the device isn't compatible with Lion and it is causing problems.
-
My MacBook Pro shuts down when i connect a USB cable.
My MacBook Pro shuts down when i connect a USB cable, only when its a 30 pin apple cable. Well one USB shuts it down and the other one doesn't work at all.
it only happens when i use an apple cable. It has no problem with my external drive nor with other things.
Ps. i did use different apple cables and they all shut it down.What are you connecting? iPad, iPhone, what?
When you say a 30-pin Apple cable do you mean a Lightening to USB cable?
Little more info needed...
Clinton -
When I connect the USB dongle from the camera connection kit I get an accessory not supported by iPad message. The card reader triggered the same msg but works now. Same msg with vga. Others have posted this problem but the only suggestion anyone has offered is to reboot, which doesn't help. I've tried.
Thanks Fred. The nearest Apple store is about two hours away, so we did the next best thing & took it to Best Buy. It stumped the "Apple Guy" there. Apparently when an Apple product is turned on it works. Period. I'm impressed that the products are normally so dependable--it just stinks that I got the one in a million that's not. Anyway, now we wait for a service call Tuesday morning. Thanks again!
-
It's strange, on my work issued Windows laptop I have no issues syncing my iPhone to iTunes. But on my personal MacBook, iTunes does not pick up my iPhone when I connect via USB. Any advice on this please?
See http://support.apple.com/kb/TS1591.
-
I have a ipod, but recently updated my laptop, how do I get my ipod to sync with my new PC, when I connect the USB the ipod say's "connected" eject before disconnecting
See KB Article: How to use your iPod to move your music to a new computer
-
How can I transfer photos from LG phone to mac notebook. Phone appears in iPhoto when connected via USB but selection for download shows 0 photos
Just open your LG volume up likes its an external HD and drag all photos onto a folder in your macbook Air.
-
My iPhone 5 is not showing up in iPhoto over WiFi.
Is this normal?
Or will it only show up when I connect with USB ?It will show up, when connected directly by USB as a camera.
-
I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live where we only have dial-up and the Apple Store said this is what I need. In addition, when I connect the phone to the connecter it falls out, it will not click in.
Why are you using a usb ethernet adaptor? Just plug the modem into the usb port.
-
I Have a problem when am connecting my I phone to Mac. All my song are geting erase from my music player
<Edited by Host>rbncool wrote:
I Have a problem when am connecting my I phone to Mac. All my song are geting erase from my music player
<Edited by Host>
That usually means that you previously synced your iPhone to a different computer. An iPhone can only sync to one computer. If you try to sync to a different one the iTunes content on the phone will be replaced by the contents of the new computer. -
I have an iphone 4, iOS 7.1.2
Mac book pro 13in Mid 2012, with OS X VERSION 10.9.4, Processor speed 2.9 Ghz, Memory 8GB 1600MHz DDR3, Intel core i7, Storage capacity 750 GB, 650 GB available.
WHEN I CONNECT, THROUGH USB CABLE, MY IPHONE TO THE MAC BOOK PRO, THE ITUNES APP STOP RUNNING AND I CAN NOT SYNCRONIZE THE IPHONE.Hello skkmmayer,
That is probably a lot of stuff you do not want on your iPhone. So this can be handled a few different was. For you current situation, you can delete the apps directly on your iPhone by holding on the app until it starts to jiggle and then tap on the X of all the apps that you do not want. The second thing you can do is before you sync with iTunes, look at the app section on your iPhone to know what gets transfer to it and you can deselect items that you do not want. Lastly, if you download content on your iPad and it is a universal app, you can actually download it directly to your iPhone by looking at your past purchases and download it directly from the App Store. Check out the articles below for more information if need further assistance.
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
iTunes 11 for Mac: Sync and organize iOS apps
http://support.apple.com/kb/PH12115
Download past purchases
http://support.apple.com/kb/HT2519
Regards,
-Norm G. -
my external hard disk ( TRANSCEND ) is not working when i connect to usb..before it was working.
1. These are the iphone forums. So what does your question have to do with iPhones?
2. Contact Transcend for support. -
Hello, I have a problem when I connect to the computer ipad 2 in itunes and click on the "Programs", itunes crashes and writes simply an error. when connecting the iphone does not. everywhere is version 7.0. Itunes is also the latest version. thank you
There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
-
HT4101 It says it requires too much power when i connect my usb??
It says it requires too much power when i connect my usb??
Ok. Many USB's trigger the too much power warning. If you have a memory card, try doing it that way. Or you can experiment with other USB sticks. I've literally had a 50/50 success rate with the ones I've tried. You can try another one. Off brands seem to work better, along with smaller ones. The largest I've had work was a 4 gig. Kingston and Sandisk often trigger the too much power warning.
Do you know the naming format to make it work? Have a folder named DCIM in the upper level and make sure that all the photos have a name of exactly 8 characters.
Maybe you are looking for
-
Please somebody help me,i´m a oracle jdeveloper beginner i got this error deploying my oracle application [Waiting for the domain to finish building...] [09:02:47 PM] Creating IntegratedWebLogicServer Domain... *** Using HTTP port 7101 *** *** Using
-
How to make the title of screen dynamic in ABAP.
Hi experts, I want to make the title of screen dynamic like:- --> i have an initial screen in which program takes some input files..and having a screen title as "INPUT FILE" with a read button. --> after clicking on read button it reads that file and
-
hi Can anybody tell me how a DTP can be used to transfer data from BI system to outside the BI system using Open hub. I need step by step. Regards, Wishva
-
After updates phone now will not charge
Oh you got to love how customer service tell's me,nothing they can do The 1 yrs warrenty is over. Wait I signed a 2yr contract. One year three months and phone shuts off when you plug charger in it. Motorola did upgrades and since then phone hasn't b
-
I am asked to enter my wireless password every time I try to go online
Until recently, my computer remembered my WEP password for my wireless connection, but now every time I want to go on the internet I'm asked to enter the password. This problem started when my daughter started using my computer a few days ago. As far