Problem when plugging in M-Audio into USB port

Hi there,
Whenever I plug in my M-Audio Fast Track Ultra into the USB drive, the screen greys out and it comes up with a message that I have to restart by holding down the power button.
Once I've done this it works fine, and there are no issues while using the interface (with Logic 9), and I've tried it on both USB drives.
Any ideas of what I can do to stop this from happening/whether it's a problem with the computer or the interface?
My laptop specs are below.
Thank you in advance...
Michael
Processor 2.2 GHz Intel Core i7
Memory 4 GB 1333 MHz DDR3
Software Mac OS X Lion 10.7.5 (11G63b)

Hello Pjgordon7, Welcome to discussions.
Below are a couple articles that may assist with this. They are written for iPhone/iPod Touch but they may assist you with the iPod Classic as well. If not I have also posted some other suggestions below.
What to do when Windows XP or Vista computer displays a blue screen error message when syncing the iPhone or iPod touch
http://support.apple.com/kb/TS1502?viewlocale=en_US
Updating the drivers on your Windows PC
http://support.apple.com/kb/HT1768
iTunes 8: If Windows Vista displays a blue screen error message when connecting iPhone or iPod
http://support.apple.com/kb/TS2280
-Run Windows OS Updates, This can be accessed from link below, or via the Windows Updates shortcut in the start menu
http://windowsupdate.microsoft.com/
-Check E-machines vendor website for possible updates not only to USB drivers but any other drivers that may need updating like camera software, video card software, etc. They can advise what is needed for your machine.
-If you are connecting iPod Classic to front USB ports. Try using some of the USB Ports on the back of the machine.
-Disconnect any un-needed USB Devices and only connect iPod Classic
I do hope some of this information is able to assist you today. Post back if needed.

Similar Messages

Cursor freezes up when flash memory is inserted into Usb Port.

I´m working with a Power Mac G4 1.25 Mhz 1.75 Gb SDRAM. Anytime I connect a flash memory into USB port cursor freezes up. I disconect the flash drive and cursor works fine. I tried with several pen drives and it hapens the same. this starts few days ago and also I noticed that the computer shutdown when is n ot in use for a while. Any help in this matter will be apreciated.
Thanks in advance.

Hi,
You've wandered onto the Final Cut pro forum, try a powermac G4 forum and you'll have better luck.
DM

I turn on iTunes. Plug my iPod classic into USB port, I've tried several ports, iPod icon comes up. Then iTunes freezes up. Until I unplug it. I've reinstalled iTunes. Still no results. I use window for itunes

I turn on iTunes. Plug in iPod classic. iPod icon come up. Then freezes up iTunes. Tried tree USB ports and nothing. I've reinstalled iTunes. So why can I sync the iPod?

Forgot to say that my Ipod Touch is at 100% charge

System hangs when any device is plugged into usb port

Proccessor: AMD 64 3200+
Motherboard: MSI RS480M2
OS: Windows XP (Home Version)
Primary Hard Drive: Maxtor 6L160M0
Secondary Hard Drive (Data Sorage): WDC WD400BB-00HEA0
Most of the posts on this site are over my head so keep responses simple.
I upgraded this computer myself about 3 months ago with the above listed new proccessor and motherboard. Everything had been working fine until a couple of days ago the computer hung while surfing the internet. Reboot attempt was unsuccessfull. Windows would hang everytime while loading. My primary hard drive was about 4 years old and wanting to upgrade to a larger drive anyway I installed the above listed Maxtor hard drive yesterday thinking it might solve the problem. It looked like it was solving the problem until I started plugging in USB devices. If I plug in my Epson USB printer or my USB jump drive, the computer hangs immediately. If I plug in my Microsoft Joystick or CH rudder pedals, it gives me a message that an unknown device is plugged in and that the device has failed. It appears the that hard drive replacement actually did nothing to change the problem. I had not thought to unplug USB devices as a solution to the problem initially. Once I plug in my printer or jump drive the computer is doing exactly what it was doing before.
I am pretty convinced there has been a failure on the motherboard. To have everything working fine for 3 months and suddenly without any software changes it stops working. Then, after reloading all the software again to still have the same exact problem. I think that pretty much eliminates software as an issue and it also eliminates the hard drive as a problem.
I did have a problem finding my motherboard's CD but I downloaded the system drivers from the MSI website plus I installed Live Update 3 and installed everything it recommended including a new BIOS. I also loaded the SATA RAID files from the floppy which I did have here (even though I am not using the SATA RAID feature). I feel confident I got everything installed now and still not working. Everything else works perfectly as long as I do not plug anything into USB ports.

Quote from: DaSoundman on 31-January-06, 12:47:11
I have to say that using this forum is not very intuitive for me. It's hard to even figure out how to post a message.
Anyway, we can close this out. I took my computer in and had a diagnosis run on it. It turns out the USB portion of the motherboard has failed and they are replacing it now.
To answer the question though. I had removed both the old hard drives when I initially installed the new MAXTOR and still had the problem and I did make sure they were jumpered as slaves before I connected them back up later.
Thanks for you help.

My iPhone won't stop vibrating when plugged into my Macbook. All software is up to date. iTunes just gives me an error. No problems when plugged into a PC. Why the nonstop vibrating!?

My iPhone won't stop vibrating when plugged into my Macbook. All software is up to date. iTunes just gives me an error. No problems when plugged into a PC. Why the nonstop vibrating!?

When I connect it to my iMac (with up-to-date OS X Yosemite 10.9.5) - it doesn't work.
Specifically - iTunes automatically launches, but then quickly shows a dialog window that says, "iTunes could not connect to the iPhone. This device is no longer connected."
Meanwhile - on my iPhone - in the upper right-hand corner (where the battery life is displayed) - you can see the "plugged in" icon (lightening bolt) rapidly blinking on and off.
In other words - it seems like, when it's plugged in - it's rapidly connecting and disconnecting (several times per second).
If I click "OK" on that dialog window on iTunes - it instantly pops back up, and continues to do so as long as I keep the iPhone plugged in.
I have tried all and stile did not resolve my problem. I tried to restart both devices, try different cable (I have original cable). Both devices are new and software's are update it on latest versions.
Thanks in advance for any help!

Why do map apps lose voice on navigation when plugged into USB port in cars?

why do map apps lose voice on navigation when plugged into USB port in cars?

Hello attempt
We've see your issue in another 2 posts. Let's focus on 1 post only so others will easily help you.
Thanks.
• Click Likes to appreciate those who helps you
• If your issue solved, mark the best post in your thread as Solution

My iphone5 no longer shows up as a device on my computer when I plug it in to a USB port on my laptop. It does not appear in iTunes as connected, either.

My iphone5 no longer shows up as a device on my computer when I plug it in to a USB port on my laptop. It does not appear in iTunes as connected, either. It does show that it is connected and charging on the phone itself. This is a new problem. It used to work just fine.

Hi Why do you need to use a PC since iOS 7 you can download updates Apps everything Over wifi I have iPhone 5 s & 2 ipads in over a year I have never connected them to My Apple pc Try a wifi update If you have problems Try a Reboot press & hold power button & menu button hold both Down until You see Apple Logo you will not last any data. Cheers Brian

Has anyone successfully used a "WD My Book for Mac" via NAS (plugged into USB port on router) as a Time Machine back-up drive?

Has anyone successfully used a "WD My Book for Mac" via NAS (plugged into USB port on router) as a Time Machine back-up drive? Apple support tech tried to tell me it wasn't possible and that the only NAS Time Machine could back up to is the Time Capsule, but I'm not buying it. I know it's doable, but I'm having a hard time figuring out which External HDDs will work and which ones won't. If not My Book for Mac, is there an External HDD that will work? (Running OS X 10.9.1 - Mavericks, btw...)

Given the nature of backups, my recommendation has always been to use a strategy that is unequivocally supported by Apple. As you already determined Apple Support unequivocally informed you that your proposal will not work, unless your router is an Apple AirPort Extreme or Time Capsule.
The exhaustive list of devices supported by Time Machine amounts to the following:
AirPort Time Capsule's built-in hard disk (any model)
External USB hard disk drive connected to a Time Capsule (any model)
External USB hard disk drive connected to an AirPort Extreme (current model only)
A hard disk drive directly connected to your Mac
That is all.
Use whatever backup device you want, but you should be aware that this site is full of reports of misery from hapless individuals who had been using NAS devices for Time Machine backups, only to find that they were incomplete, corrupted, or useless when they were required. Apple won't care if you lose your data while using a Time Machine configuration specifically excluded from their technical support documents.

Cursor freezes up when flash memory is conected to USB Port.

I´m working with a Power Mac G4 1.25 Mhz 1.75 Gb SDRAM. Anytime I connect a flash memory into USB port cursor freezes up. I disconect the flash drive and cursor works fine. I tried with several pen drives and it hapens the same. this starts few days ago and also I noticed that the computer shutdown when is n ot in use for a while. Any help in this matter will be apreciated.
Thanks in advance.

You don't say which USB port you are plugging into. Don't plug into the side of your keyboard - the circuit gets overloaded. Plug into the port on the rear of your Mac. Besides your keyboard and mouse, what other USB devices are connected?
You may want to get a powered USB hub - has a separate power supply. Another alternative is to get a USB 2.0 PCI card.
 Cheers, Tom

When i use on of my usb ports it freezes my mouse

when i use one of my usb ports it freezes my mouse

Had the same problem and trying to remember how I fixed it. Let's see...
Try this:
1) Settings > Messages > Receive At > Use your Apple ID for iMessage > make sure you are logged out from Apple / iTunes.
2) under "You can be reached for messages at:" > make sure only your phone number shows and no email address.
Hope that works, if not I just can't remember what else I did. However I got it working so that my tel number now shows to iMessage recipients instead of my email address.

Problem when I tried to change weblogic listen port from 7001 to 80

HI! I have problem when I tried to change weblogic listen port from 7001 to 80. When I changed from 7001 to 7777 then all works ok! But why not on 80? With apache all works ok on 80 too.
I restart my weblogic server and then I have following errors.
<2009.1.4 16:02:13 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to STARTING>
2009.1.4 16:02:14 oracle.as.jmx.framework.PortableMBeanFactory setJMXFrameworkPr
oviderClass
INFO: JMX Portable Framework initialized with platform SPI "class oracle.as.jmx.
framework.wls.spi.JMXFrameworkProviderImpl"
2009.1.4 16:02:15 oracle.adf.share.config.ADFConfigFactory cleanUpApplicationSta
te
INFO: Cleaning up application state
<2009.1.4 16:02:22 EEST> <Notice> <Log Management> <BEA-170027> <The Server has
established connection with the Domain level Diagnostic Service successfully.>
<2009.1.4 16:02:22 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to ADMIN>
<2009.1.4 16:02:22 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to RESUMING>
<2009.1.4 16:02:22 EEST> <Emergency> <Security> <BEA-090087> <Server failed to b
ind to the configured Admin port. The port may already be used by another proces
s.>
<2009.1.4 16:02:22 EEST> <Error> <Server> <BEA-002606> <Unable to create a serve
r socket for listening on channel "Default". The address 85.254.224.235 might be
incorrect or another process is using port 80: java.net.BindException: Address
already in use: JVM_Bind.>
<2009.1.4 16:02:22 EEST> <Critical> <WebLogicServer> <BEA-000362> <Server failed
. Reason: Server failed to bind to any usable port. See preceeding log message f
or details.>
<2009.1.4 16:02:22 EEST> <Error> <Server> <BEA-002606> <Unable to create a serve
r socket for listening on channel "Default[2]". The address 127.0.0.1 might be i
ncorrect or another process is using port 80: java.net.BindException: Address al
ready in use: JVM_Bind.>
<2009.1.4 16:02:22 EEST> <Error> <Server> <BEA-002606> <Unable to create a serve
r socket for listening on channel "Default[1]". The address 192.168.0.102 might
be incorrect or another process is using port 80: java.net.BindException: Addres
s already in use: JVM_Bind.>
<2009.1.4 16:02:22 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to FAILED>
<2009.1.4 16:02:22 EEST> <Error> <WebLogicServer> <BEA-000383> <A critical servi
ce failed. The server will shut itself down>
<2009.1.4 16:02:22 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to FORCE_SHUTTING_DOWN>
2009.1.4 16:02:22 oracle.adf.share.config.ADFConfigFactory cleanUpApplicationSta
te
INFO: Cleaning up application state
2009.1.4 16:02:22 oracle.adf.share.config.ADFConfigFactory cleanUpApplicationSta
te
INFO: Cleaning up application state
Best regards!

Debuger,
It does not matter which WLS version I am using (although I'm using 10.3, the one that comes with JDev 11g).
The problem is that SOME OTHER PROCESS on your machine is listening on port 80. Guess you need to go to the Microsoft forums to find out how you can tell what that OTHER, NOT WLS process is.
John

Hi. I have an iPhone 4s. The music doesn't play when I connect it to my car stereo. It used to play previously but stopped playing all of a sudden. My phone is getting charged when I cut it to the USB port. Please help with this. The iOS is 6.1.3.

Hi. I have an iPhone 4s. The music doesn't play when I connect it to my car stereo. It used to play previously but stopped playing all of a sudden. My phone is getting charged when I cut it to the USB port. Please help with this. The iOS is 6.1.3.

Hello Priyanks,
I found an article with steps you can take to troubleshoot issues with an iPhone not connecting to your car stereo:
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/TS3581
Thank you for using Apple Support Communities.
Best,
Sheila M.

IPnone 4s not recognized by Envy dv7-7333cl rnning Windows 8 when plugged into usb port

Laptop does not recognize iPhone 4s when plugged into any of the 4 usb ports. All usb drivers are up to date. All Win 8 and HP udates have been installed and are current. Ports do recognize memory sticks so seem to be working. Is there a special driver needed for iPhone?
This question was solved.
View Solution.

Hey texasbootz,
I'll have to get you to answer a few questions to understand what is going on exactly:
When the iPhone is plugged into the notebook, does it charge?
When the iPhone is plugged into the notebook, does it show up in device manager?
Is iTunes installed?
If it is not charged when plugged in, it is possible that the cable you are using isn't functioning properly, and you may need a replacement. Or, the iPhone itself is having some issues.
In any case, since other devices are working in all of your USB ports, it is possible that its either a software issue (with the iPhone's drivers) or an issue with the iPhone case. You'll have to contact Apple for support on either of those issues. I'd suggest trying to re/install iTunes, see if that fixes it, then to contact Apple.
Hope this helps!
I am an HP employee.
• Say thanks by clicking the 'Thumbs Up' button on the left
• Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution' if it solves your issue

Error when plugging into USB Port--Insufficient Power

Hello...wondering if I can get some advice/assistance.
On my G4, when I plug in my 5th Gen IPod via Firewire, I get the "not supported," which I'm okay with. But when I plug into a USB Port, I get "insufficient power" at ports from the keyboard and my hub (which even has its own electrical supply). Must I plug directly into the G4 Tower?
Post here, or even better, pls email me at [email protected]
Thanks,
Jim Angelo

Here's my USB Stats (Let me know what you think I can do to remedy--Thanks, Jim):
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0019
PCI Revision ID: 0x0001
PCI Vendor ID: 0x106b
Bus Number: 0x18
Hub:
Version: 1.25
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Product ID: 0x2046
Vendor ID: 0x0451
HP LaserJet 1200:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: HewLett Packard
Product ID: 0x0317
Serial Number: 00CNBC027805
Vendor ID: 0x03f0
psc 2400 series:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: hp
Product ID: 0x3611
Serial Number: MY386C205F6T
Vendor ID: 0x03f0
Hub:
Version: 1.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Product ID: 0x9115
Vendor ID: 0x05ac (Apple Computer, Inc.)
USB Monitor:
Version: 1.0e
Bus Power (mA): 500
Speed: Up to 1.5 Mb/sec
Manufacturer: LG Electronics Inc.
Product ID: 0x9215
Vendor ID: 0x05ac (Apple Computer, Inc.)
Hub in Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1003
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 1.06
Bus Power (mA): 500
Speed: Up to 1.5 Mb/sec
Manufacturer: Fujitsu Takamisawa Component
Product ID: 0x0302
Vendor ID: 0x05ac (Apple Computer, Inc.)
Hub:
Version: 1.25
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Product ID: 0x2046
Vendor ID: 0x0451
HP LaserJet 1200:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: HewLett Packard
Product ID: 0x0317
Serial Number: 00CNBC027805
Vendor ID: 0x03f0
psc 2400 series:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: hp
Product ID: 0x3611
Serial Number: MY386C205F6T
Vendor ID: 0x03f0
Hub:
Version: 1.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Product ID: 0x9115
Vendor ID: 0x05ac (Apple Computer, Inc.)
USB Monitor:
Version: 1.0e
Bus Power (mA): 500
Speed: Up to 1.5 Mb/sec
Manufacturer: LG Electronics Inc.
Product ID: 0x9215
Vendor ID: 0x05ac (Apple Computer, Inc.)
Hub in Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1003
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 1.06
Bus Power (mA): 500
Speed: Up to 1.5 Mb/sec
Manufacturer: Fujitsu Takamisawa Component
Product ID: 0x0302
Vendor ID: 0x05ac (Apple Computer, Inc.)
USB Monitor:
Version: 1.0e
Bus Power (mA): 500
Speed: Up to 1.5 Mb/sec
Manufacturer: LG Electronics Inc.
Product ID: 0x9215
Vendor ID: 0x05ac (Apple Computer, Inc.)
Hub in Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1003
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 1.06
Bus Power (mA): 500
Speed: Up to 1.5 Mb/sec
Manufacturer: Fujitsu Takamisawa Component
Product ID: 0x0302
Vendor ID: 0x05ac (Apple Computer, Inc.)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0019
PCI Revision ID: 0x0001
PCI Vendor ID: 0x106b
Bus Number: 0x19

My wife has old macbook osx and cannot transfer photos from her iPhone 5 when plugged into usb port

my wife has old macbook osx and cannot transfer photos from her iPhone 5 when plugged into usb port

She needs to upgrade to OS X 10.6.8 buy purchasing here http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard and then running software update when the installation is complete.

Problem when plugging in M-Audio into USB port

Similar Messages

Maybe you are looking for