Problem when printing in Polish

Hi
developers have a problem when printing a Polish form, special charactors like ł, ś, ć etc are all printed as '#'.
TY
regards
Hicham
Edited by: Juan Reyes on Sep 10, 2009 12:22 PM

Let me correct your thread...
problem when printing a Polish
You cannot print "a polish", you have problems printing "in polish". :-D
Regards
Juan

Similar Messages

Problem when printing " " using XSL

I have a problem when printing the "<" .It is always printed as
"<" in the HTML file.
I wish to transfer a Javascript text . I tried
using CDATA . This is an extract of a portion in my XSL File
which uses CDATA.
<![CDATA[
function createLOV(lov_name, array_touse) {
document.writeln("<select name='" + lov_name + "'>");
for (var i=0; i < array_touse.length; i++) {
document.writeln("<option value='" + array_touse[i] + "'>" +
array_touse[i] + "</option>");
}]]>
And this is what the HTML file contains
function createLOV(lov_name, array_touse) {
document.writeln("<select name='" + lov_name + "'>");
for (var i=0; i < array_touse.length; i++) {
document.writeln("<option value='" + array_touse[i] + "'>" +
array_touse[i] + "</option>"); }
document.writeln("</select>");}
I tried using the <xsl:text disable-output-escaping="yes"> but in
vain.
If i use < or &x3C; , i still get < in the HTML file.
How do I solve this problem. I'm using XSQL Servlet with JSDK2.1
both running on Sun Solaris2.6 .
Thanks in advance,
Suresh
null

Suresh Seetharam (guest) wrote:
: I have a problem when printing the "<" .It is always printed
as
: "<" in the HTML file.
: I wish to transfer a Javascript text . I tried
: using CDATA . This is an extract of a portion in my XSL File
: which uses CDATA.
: <![CDATA[
: function createLOV(lov_name, array_touse) {
: document.writeln("<select name='" + lov_name + "'>");
: for (var i=0; i < array_touse.length; i++) {
: document.writeln("<option value='" + array_touse[i] + "'>" +
: array_touse[i] + "</option>");
: }]]>
: And this is what the HTML file contains
: function createLOV(lov_name, array_touse) {
: document.writeln("<select name='" + lov_name + "'>");
: for (var i=0; i < array_touse.length; i++) {
: document.writeln("<option value='" + array_touse[i] + "'>"
+
: array_touse[i] + "</option>"); }
: document.writeln("</select>");}
: I tried using the <xsl:text disable-output-escaping="yes"> but
in
: vain.
: If i use < or &x3C; , i still get < in the HTML file.
: How do I solve this problem. I'm using XSQL Servlet with
JSDK2.1
: both running on Sun Solaris2.6 .
: Thanks in advance,
: Suresh
Currently, the parser does not support the xsl:output and
output-escaping mechanisms. We plan on adding support for this
in a future release.
Oracle XML Team
http://technet.oracle.com
Oracle Technology Network
null

Problems when printing help topics from OHJ

We have encountered some persistent problems when printing help topics from Oracle Help for Java (Ice Browser).
NOTE: When we print the same source files from Oracle Help for the Web, the printing problems are gone.
(1) Spacing Errors (all printers had identical results)
Text with special formatting (<b>, <i>) often has either too much space or not enough space.
Links often have extra spaces underlined before or after the link, itself.
(2) When printing multiple help topics from the TOC (an entire branch in the tree):
On some printers, no graphics print correctly, but instead print as one of the following: 1. empty box the size of one character, 2. black box the size of one character, 3. black box the size of the original graphic. We could not detect a pattern that caused 1, 2, or 3.
NOTE: all graphics are bit maps (screen captures) that were generated in the same manner.
NOTE: if these same help topics are printed one at a time form Oracle Help for Java, the graphics print fine.
Is this a problem with the Ice Browser?
Thanks for the help,
Wendy Studinski

There are a known issue with the ICEBrowser printing in some circumstances. The laying out of text by the ICE Browser relies on font metrics (being able to measure the width of a run of text in a given font). On screen it looks great, but when printing, even though the GraphicsConfiguration for the printer is being used, these widths are sometimes off, which can result in text running together at boundaries between text styles. We're not sure what to do about this problem, and we've reported it to IceSoft.
Not every font has this problem, so varying the font you are using might help the appearance when printed.
The other problem you report, problems with the images when printing multiple topics, is something that we will look into.

"Problem When Printing" error on Mac Mini

Hi all,
I just recently updated my Mac Mini from 10.3 to 10.4. Instead of Archive and Install I formatted and did a clean install.
I have my printer set up, however whenever I try and print anything from any application I get a very unhelpful "Problem when printing" error, and nothing prints.
I also get the same error when trying to save to PDF.
My printer is a HP Deskjet 3750, and the driver is the one included with 10.4 (as per HP's instruction), but I don't think it's a driver problem as Save to PDF gives me the same error.
I've already tried repairing permissions. Anyone know what could be causing this. Any help is greatly appreciated.
Thanks.

Bugger. PSR is often a winner
You could try installing Gutenprint 5.0.1 available from Sourceforge (it's about 15MB). It's an updated version of the included GIMP-Print drivers and may repair/replace/install some of the core files. Otherwise you may have to contact Apple and see if you can get 10.4.9 mailed to you.

Performance problem when printing - table TSPEVJOB big size

Hi,
in a SAP ERP system there is performance problem when printing because table TSPEVJOB has many millions of entries.
This table has reached a considerable size (about 90 Gb); db size is 200 Gb.
Standard reports have been scheduled correctly and kernel of SAP ERP system is updated.
I've tried to scheduled report RSPO1041 (instead of RSPO0041) to reduce entries but it is not possible run it during normal operations because it locks the printing system.
Do you know why this table has increased ?
Are there any reports to clean this table or other methods ?
Thanks.
Maurizio Manera

Dear,
Please see the Note 706478 - Preventing Basis tables from increasing considerably and
Note 195157 - Application log: Deletion of logs.
Note 1566659 - Table TSPEVJOB is filled excessively
Note 1293472 - Spool work process hangs on semaphore 43
Note 1362343 - Deadlocks in table TSP02 and TSPEVJOB
Note 996455 - Deadlocks on TSP02 or TSPEVJOB when you delete
For more information see the below link as,
http://www.sqlservercurry.com/2008/04/how-to-delete-records-from-large-table.html
http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=91179
http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=83525
If any doubts Let me know.
Thomas
Edited by: thomas_raja on Aug 7, 2011 12:29 PM

Problem when printing booklets prints pages 1,2 and 11 as if I wants to print all

I am using XP and 2000 MS word
I am having a problem when printing booklets from time to time. I get it ready to print in booklet form with 12 pages and my printer gives me the options. “Print all” “current page” “selection” or “pages” Because it is booklet I want to print the first 4 pages to be folded and glued as a small book. When I inter 1-4 as the example shows some times it prints OK but about a week later it prints pages 1,2 and 11 as if it wants to print all. I thought it was the printer but think it could be in some setting of the word program or my computer it self.

Also does this (i.e. prints web pages over several pages despite changing settings) on my laptop at work with an HP printer. This started when I upgraded to Firefox 9.0.1.

Color management problem when printing

(sorry for the double post, since the problem affect both illustrator and photoshop and in fact also indesign) in decided to repost it here in the photoshop forum. thank you for any help!)
hi ! im in charge of a big print lab in a university. All macpro quad running on 10.6.4, CS5 all updated.
i have a major problem when printing from all 3 CS5 apps : Illustrator (being the worst), photoshop and indesign : each one produces a different print even if i use the SAME color management options (the application manage color using my own color profile file created with a i-one tool from greta macbeath and using eye-one match 3). im printing on a XEROX 7750gx laser printer. very cool printer never had trouble with colors before with it, in any case it was always the software part that was causing color problems (like i suspect in this case).
how can 3 softwares under the same application collection and brand, using the same color profile and options (IDENTICAL ! it's triple check all the options!) can produce 3 different prints when printing the same image (it's a color psd created under photoshop CS5) ?!
i remember having some trouble like this when we first got CS1 in our lab, but not this bad... i've checked everything... i realy don't know how to fix this problem...
the best setting so far is in Photoshop when the application manage the color and using my color profile file in perceptual mode. best output so far, not the best i had in the past, CS4 was way more perfect with color management.
i realy need to find a solition 'cause the students expect the color to be almost perfect (and they almost were using CS4 in the past...
thanx for any tips & help !
+

many thanx for your reply & help.
i've just recalibrated everything in my workflow : my screen (perfect!), my xerox 7750 color laser printer. i've recreated a new color profile file for the xerox color. and the same thing is happening : a kind of pink color all over my prints and every adobe's applications is printing different results. in photoshop i can manage the problem when forcing to print in perceptual mode. not perfect but it's fine. and with the other software specialy like ACROBAT and INDESIGN there's no option like this so it prints very badly. only option is to print in adobe 1998 rgb or SWOP cmyk (depending of the color space of the image of course)... the image is use for my test is RGB. images in CMYK are doing the same exact thing.
by the way for calibration is use an x-rite (greta macbeth) eye-one tool with eye-one match 3.6.3. i calibrate the screens and create color profile with this tool since ADOBE CS1 and never had this much trouble with colors...
here's a capture from photostop CS5 print dialog. when using the option "match print colors" you can see the image with all the PINK NOISE when using the print in RELATIVE colormetric mode (at the bottom right). using perceptual is "fine" (not color perfect but OK).
http://i53.tinypic.com/qzge12.jpg
it's worst in Acrobat and Indesign since i can't use perceptual colormetric print mode...
im realy starting to think that i better uninstal CS5 and go back to CS4...
thanx for your help !

Crystal report problem when printing

We have developed a crystal report that adds extra pages when i physically try to print the report.
In the viewer it does not have the extra pages, but when i print it prints a blank page after every printed page.
The conclusion of one of the support employees was that extra lines are there when printing, but not when i view it in the crystal viewer.
Version : 11.0.0.1282.
The viewer im talking about is the integrated preview of crystal reports.
Any help is greatly appreciated.
Edited by: RolandWorms79 on Sep 2, 2009 10:41 PM

Like I said, let me send the report to you so you can try. I have tried everything on this green earth to get that report to print correctly. I must say im getting very unsatisfied and frustrated because everyone seems to have the solution (either upgrade x or y), but nobody is willing to look at my report and try themselves.
I have created another call for support (which is ridiculous, because its my second call) and nobody has contacted me yet.
(the support process is flawed anyway, because i cant seem to be able to register my call anywhere, i miss some number ..)
Helping is very simple. If you think its the printer driver and you have never had such a problem before, try it yourself, see what happens. I have been told to buy the new crystal, because that would solve it. it did not. Upgrade to the newest version, that would help, it didnt. try to change some settings in CR, does not help. Try a different printer, did not help.
To be honest, i have had it with try this or try that. My suggestion, try yourself. If someone had done that from the start i would have solved this problem ages ago.
I am working on this problem for about 3 months(!!!) now and i just simply need a solution.
So if anybody has a suggestion that does not include upgrade to x or y, please let me know.

Problems when printing Sapscript...

We have imported a number Sapscripts in Russian into our unicode system. Looking at the Sapscript I can see Russian text in both the first and next page of the form. However, when printing the first page looks perfect and displays in Russian, however, the second page shows hashes (#) where the Russian text should be.
If none of it worked I might be able to understand what was going on, but when the first page prints fine I find it difficult to understand what is going on.
I have run a check agianst both pages in SE71 and re-activated, but still no joy. What could be going wrong?.
Gary

Thanks guys, I have now found out what the problem was.
All my test data was set up for me by the functional guys. The output messages that were repeated were originally set to language of English rather than Russian, and hence the problem.
Apologies everyone.
Regards
Gary King

Problem when printing from the browser

The report is displayed in the browser properly. We are using rwcgi to view the reports in the browser. But when printed using the print option of the browser, the page setup is taken from the browser's page setup. How do we set the browser's page setup from the reports? Also the fonts are changed to the browser's font. How do we force the browser to take the same font as defined in the reports?
null

Oh my how embarrassing! The only place I neglected to check was in Firefox itself and under File-> Page Setup it was set to 50%. Reset it to 100% and problem solved!

InDesign Problems when Printing to Xerox 700i Digital Color Press Running Fiery EFI

Mac OS 10.9.3, up to date Adobe CC InDesign.
Every time I print to the Xerox using Fiery features, afterward I cannot save. If I close the file and try to re-open it, I am told that another user is modifying the document. If I restart, then go into my file folder and discard the idlk file that was not removed when I closed, I can once again save changes etc, until I print again. Then no deal...
Today I installed Indesign CC (2014). Every time I print an Indesign file using the Xerox with the Fiery features, the application prints, then crashes. I was hoping the new version would be better. For me it is WORSE!
I have written nine books with InDesign. They are each 500+ page manuals. I have tried to find help for a year and can't seem to find it. I am close to telling my partners that we need to find a new solution. I cannot take the extreme hit to my productivity that I have taken trying to work with this software package. Seems a shame since I've been through several versions of InDesign over the last 12 years. Changing will be extremely painful, but I may just need to bite the bullet.

Yes, I have Fiery Hot Folders Console. That is certainly an alternative that should work as I can then avoid having to choose Fiery Features from the print dialog box in order to choose the paper tray and other features I need.
I am about to try a clean install of OS 10.9.3, and I am not the least bit happy about it. Adobe CC is my main set of go-to applications for my work, and those are the only applications that give me ANY problems with printing. I have forked out real money on different versions since I started using Adobe in the late 1990's, and my troubles seem to increase with every new release.

Resolution problem when printing JPanel with picture on bg

Hellow!
I have some problems with printing JPanel component. I have a picture drawn on the background of the JPanel and several buttons on it. The whole JPanel is about 1600x800px. When i print whole the component with the help of PDF virtual printer, component is printed larger than A4 list. It is strange for me because print resolution is 600 dpi, so whole component must be a rectangle with the size about 2.5x1.5 inches. When I scale the graphics before painting component to fit image to page (i mean ... {color:#ff0000}g2d.scale(sc,sc); panel.paintAll(g2d);{color} ...), the picture's quality becomes very bad.
I understod it so: I draw the component on the paper in screen resolution, then I decrease image size, so quality also decreases.
My question is: how to draw on the graphics of printing paper the component in printers resolution (600dpi), but not in screen resolution.

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

[smartforms] Problem when printing on distant printer

Hi,
I'me facing a printing problem with a smartform : it's OK when it's printed on LOCL printer, but KO when printed on other printer.
In this case, I obtain some gaps on colomn and differences in font size.
Would someone have an idea that could help me to solve that problem?
Thank you by advance.
AR

Usually we print our forms in SAP configured printers, so always try to design your forms according to printer configured in SAP.
now, coming back to your question, this is the problem why it is picking the wrong font... the font family that is used in your smartform(check smart style) with specified size may not be loaded into SAP system... check the font families that are available in SAP system in SE73 tcode and modify your smartform accordingly...
If you are using LOCL as your printer it picks the fonts from your local machine.. since the font exists in your local machine it may be displaying correctly...
Close the thread once your question is answered.
Regards,
SaiRam

Aligment problem when printing calendar

We previously used Sharepoint 2007 and had no problem printing a calendar (month view) with about one or two appointments per day.
Since I have recreated one of our calendars in SharePoint 2010, when we print, the alignment is off (events do not line up under the dates). This is especially evident when printing at 70 or 80% instead of having it fit to window.

We had the same problem with a client. This seems to be the workaround for now.
Select Calendar from Quick Launch
Site Actions drop-down to
Edit Page
Calendar’s drop-down, choose Edit Web Part
Expand Appearance
Choose the “Yes” radio button under
Width , and put 12 and drop-down should be
inches
Hit Apply
You may need to adjust the width to get it just right for your screen resolution.
Best,
Darrin
Currie & Wiltshire Inc.

Borderless problem when printing with HP Photosmart K510A

help me with this one HP support is closed today, are you experiencing this borderless problem if printing bordless a part of the image gets cut off when printing right now I'm printing in 4R the when I "print preview" the image is not cut off but when the actual output of print its cut off in all 4 corners maybe a few millimeters
look at my watermark its cut off my aspect ratio is 3:2
I printed it on a 4x6 paper (4R) they have identical aspect ratio I even tried to cropped to 4R still it gets cut off or is this an HP printer problem
please help this is getting frustrating

can anyone help me with this one?

Problem when printing in Polish

Similar Messages

Maybe you are looking for