Problem when printing the report
Hi,
we have installed oralce 10g server.and created the reports all the formats are supporting by the server.if you give the direct printer option printer is printing junk values . any body help me on this.
Hi,
How many portlets are there in your page.
Are you printing the report portlets ?
Could you explain little bit clearly ?
Regards,
Vijay.B
Similar Messages
-
When printing the report , it will show an error
Post Author: tramp168
CA Forum: General
I use crystal report2005 in C#2005 to design several reports, all the reports can be shown normally when previewing on the all user computer, and the reports can be printed on most of user's PCs, but two users can't print the reports, when printing,it will show below error:
Error in file c:\docum~1\..............*.rpt
the request could not be submitted for backgroud processing.
how to handle the issue.
thanks all in advance!Post Author: V361
CA Forum: General
do the two users who can not print, have the same printer types installed as those that the report does print on ? (May need to add a NEW printer definition to the failing computers, and see if the report works) -
Fields Truncated when printing the report???
I have this exemple in the monitor when I generted the module:
" Meziane Noureddine
7, Rue de Geneve"
But when I print this report it's like this :
" Mezia Noureddin
7, Rue de Genev
Why????
thanks lotHi,
Set the printer off. then On.
Quit reports then reprint the report.
Hope this helps,
CB -
Performance Problem when executing the report for the first time.
Hi,
We have a Zreport...to improve the performance i created Index on few Data Base table..before my changes it used to take more than 15 minutes after the changes it taking less than 1 min for the same variant and for other variants also.
But when executing the first in morning its taking the same time more than 15 min.Please let me know how to increase the performance when executing first time also,
Thanks,
Kiran.Hi all,
Appreciate your valuable replies...
@ Thomas: i do accept with your solution running a background job..but user is not accepting for it..thanks for your reply.
@Siegfried Boes : for testing purpose Im running this manytimes..but for user they may
require when ever they need to know open oders.the volume of the data is barongs 300-350 at
max.
@Brad Bohn : After creating the index the repose time reduced to half ...i hope i have
created a right index.
Observation here...I executed the report in production system more than 5 times it took the
same time, my changes are still in quality..so i think may be for selecting the right index
its taking this much time.and for the next time is taking right index n doing it so it taking
less.
Do you accept it?.if so Please let me know how to explicitly say the select statement to
use my index.
Thanks,
kiran. -
Problem when exporting the report to PDF viwer a 45,000-page report
I am using Visual Studio 2013 with the report vivew.
I have a report that works correctly, however when generating a 45000 pages he is giving memory error when exporting to PDF, any tips?Check this SAP Note: 1089388 Incorrect value in exported PDF when Concat function is used
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E¬e_numm=1089388] -
Problem when printing the records of database
Hi all,
Although I can use the PrinterJob class to print the records of certain table in database directly to printer, it is difficult to deal with the different length of fields between different records so that, say, the first field of some records overlap with the second field when printing.
I find any layout/table method in java cannot be used in the PrinterJob class, only Graphics can be used. Does anyone know how to print the database in a good way?
thanks!Perhaps java.text.MessageFormat is what you're looking for.
Note that in v1.4 there's also the new Java Print Service API (javax.print). (I haven't used it yet).
Greets
Puce -
XL Reporter problem when edit the report
Dear All,
We are facing a problem regarding the xl reporter. when we tried to edit the excel reporter report, there was an error message: Automation Error. Library not registered.
Then we tried to register the com add-ins but unfortunately it wasn't succesful. After we select the IXXLReporter.dll it wasn't display in COM Add-Ins window.
Do you have any idea what's the problem?
Thanks and Regards
LailusDear Lailus,
In order to try to resolve the issue, could you please reinstall XL reporter
addon as per Note 819501.
Also please make sure that you are using the correct version of Microsoft
office application as per the supported platform available in the service
market place.
http://service.sap.com/smb/sbo/platforms
Regards,
Rakesh Pati
SAP Business One Forum Team. -
Hyperion IR 9.3.1 - Issue in printing the report after exporting it to pdf
Hi All,
I am facing a problem in printing the report after exporting it to pdf format using Hyperion Interactive Reporting 9.3.1. I have set page size of report section to 11X17 inch landscape. Now I am exporting this report section to pdf. Report gets exported to pdf with size 11X17 inch landsacpe. But when I am trying to print this pdf it is shrinking the documnet size to A4 size paper and printing it rather it should print it on 11X17 inch paper size. Please suggest if there is fix available for this issue.
Thanks
Ujjawal"File > Print Setup > Paper > Size" on PDF.
I think this issue is only to do with the printer and not IR.
I think the question now is "Can your printer print 11X17 pages or not". -
LOGO not going when sending the report as Email attachement
Hi
We are calling reports in two ways (both as html format) to be sent as Email. The report includes company logo at the top
1.Running report in cache through Web.Show_document and
copy it by using copy_report_object_output and
displaying it using Web.show_document('mailto: '||:resorts_name.e_mail);
2. By using xml distribution list to dynamic emails
web.show_document('myserver...servlet?report=myreport&server=myserver&userid=user@ourdb
&distribute=yes&destination=ourxml.xml');
By using 1st method The report has to manually reattach, and is attached and sent but Company Logo is not being displayed and it shows only the html file and at the logo it displays the red crossed. The reason seams that when it produces the report it creates two file html and gif file and while reattaching it attach only htm and not logo.
By Using 2nd method of the distribution list and the xml file it attaches report in the body however it disturbs the margin due to the email headers and it shows the logo but when prints the report again it show red marked blank area as of 1.
Does any one faced the problem of logo not being displayed at the email when report was sent and any solution regarding this will be highly appreatiated.
Regards
Yasir MaqboolHi,
After generating them write a program to send the mail .
for that convert the pay slip to PDF format and attch it to mail.
for converting it to PDF use this FM <b>CONVERT_PAYSLIP_TO_PDF</b>
after conversion send it using <b>SO_NEW_DOCUMENT_ATT_SEND_API1</b>
Regards
vijay -
Problem when printing " " using XSL
I have a problem when printing the "<" .It is always printed as
"<" in the HTML file.
I wish to transfer a Javascript text . I tried
using CDATA . This is an extract of a portion in my XSL File
which uses CDATA.
<![CDATA[
function createLOV(lov_name, array_touse) {
document.writeln("<select name='" + lov_name + "'>");
for (var i=0; i < array_touse.length; i++) {
document.writeln("<option value='" + array_touse[i] + "'>" +
array_touse[i] + "</option>");
}]]>
And this is what the HTML file contains
function createLOV(lov_name, array_touse) {
document.writeln("<select name='" + lov_name + "'>");
for (var i=0; i < array_touse.length; i++) {
document.writeln("<option value='" + array_touse[i] + "'>" +
array_touse[i] + "</option>"); }
document.writeln("</select>");}
I tried using the <xsl:text disable-output-escaping="yes"> but in
vain.
If i use < or &x3C; , i still get < in the HTML file.
How do I solve this problem. I'm using XSQL Servlet with JSDK2.1
both running on Sun Solaris2.6 .
Thanks in advance,
Suresh
nullSuresh Seetharam (guest) wrote:
: I have a problem when printing the "<" .It is always printed
as
: "<" in the HTML file.
: I wish to transfer a Javascript text . I tried
: using CDATA . This is an extract of a portion in my XSL File
: which uses CDATA.
: <![CDATA[
: function createLOV(lov_name, array_touse) {
: document.writeln("<select name='" + lov_name + "'>");
: for (var i=0; i < array_touse.length; i++) {
: document.writeln("<option value='" + array_touse[i] + "'>" +
: array_touse[i] + "</option>");
: }]]>
: And this is what the HTML file contains
: function createLOV(lov_name, array_touse) {
: document.writeln("<select name='" + lov_name + "'>");
: for (var i=0; i < array_touse.length; i++) {
: document.writeln("<option value='" + array_touse[i] + "'>"
+
: array_touse[i] + "</option>"); }
: document.writeln("</select>");}
: I tried using the <xsl:text disable-output-escaping="yes"> but
in
: vain.
: If i use < or &x3C; , i still get < in the HTML file.
: How do I solve this problem. I'm using XSQL Servlet with
JSDK2.1
: both running on Sun Solaris2.6 .
: Thanks in advance,
: Suresh
Currently, the parser does not support the xsl:output and
output-escaping mechanisms. We plan on adding support for this
in a future release.
Oracle XML Team
http://technet.oracle.com
Oracle Technology Network
null -
Rendering Problem when printing to PDF using PDFCreator.
When I print my report to PDF using PDF Creator it overlays the text over itself vs when i export to pdf and then print it prints it fine, can anyone enlighten me as to why it does this?
Hi Raudel,
According to your description, you can export the report to PDF and print it well. However, when you print the report directly to PDF with PDF Creator, fields are overlapping.
Since you mentioned the report can display correctly after you export the report to PDF then print it, we can make sure the PDF rendering can work fine with reporting services. So it should not be the issue in Reporting Services. As we tested in our environment,
when print the report directly to PDF with PDF Creator, report also display well. In your scenario, it supposed to be issue with PDF Creator. I suggest you contact the PDF Creator vendor to get some more effective advices.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu -
Crystal report problem when printing
We have developed a crystal report that adds extra pages when i physically try to print the report.
In the viewer it does not have the extra pages, but when i print it prints a blank page after every printed page.
The conclusion of one of the support employees was that extra lines are there when printing, but not when i view it in the crystal viewer.
Version : 11.0.0.1282.
The viewer im talking about is the integrated preview of crystal reports.
Any help is greatly appreciated.
Edited by: RolandWorms79 on Sep 2, 2009 10:41 PMLike I said, let me send the report to you so you can try. I have tried everything on this green earth to get that report to print correctly. I must say im getting very unsatisfied and frustrated because everyone seems to have the solution (either upgrade x or y), but nobody is willing to look at my report and try themselves.
I have created another call for support (which is ridiculous, because its my second call) and nobody has contacted me yet.
(the support process is flawed anyway, because i cant seem to be able to register my call anywhere, i miss some number ..)
Helping is very simple. If you think its the printer driver and you have never had such a problem before, try it yourself, see what happens. I have been told to buy the new crystal, because that would solve it. it did not. Upgrade to the newest version, that would help, it didnt. try to change some settings in CR, does not help. Try a different printer, did not help.
To be honest, i have had it with try this or try that. My suggestion, try yourself. If someone had done that from the start i would have solved this problem ages ago.
I am working on this problem for about 3 months(!!!) now and i just simply need a solution.
So if anybody has a suggestion that does not include upgrade to x or y, please let me know. -
My report is printing half of the page when I print the report Hp psc 1315
My report is printing half of the page when I print the report in this printer
Hp psc 1315 all in-one and when the operating system is windows xp , but when
I run the same report in windows me , and the same printer it is running well
And my report version is :
Report Builder 6.0.8.23.0
ORACLE Server Release 8.0.6.0.0
Oracle Procedure Builder 6.0.8.20.0
waiting for your valuable answer .
Best regards
Jamil alshaibanii would like to now if there is any additional software required for the windows xp and oracle report to solve this problem
please help
betst regards
jamil alshaibani -
How can I make signature darker when I print the report?
I need to put my manager's signature on the report. The signature is too light, How can I make it darker when I print the report?
I used file link and OLE, both did't make it.
Thanks.No way to do it directly in the report. You need to work with signature image file using any graphic software to increase its contrast. The easiest probably would be to use Paintbrush and change the image to black-and-white, then save back as jpeg file.
-
The second time when i print the report the page appear cut in the right
hi,
I created a report in Report Builder 6i. When i print the report appear well, but when i try to print the same report second time in the right of the page appears cut.
Why? What should I do to appear the entire page at the second print?
Thx.Flattening and merging are very similar. The main difference is merging keeps the transparent areas, whereas flattening removes all transparent areas by giving it a white background. A good example of flattening is a jpg image.
Since you have closed the file by closing photoshop, that means that the history is now gone, no way of undoing.
So that leaves you with two choices.
You can either recreate the whole document.
Or you can make selections of areas you are keeping and moving them one at a time to new layers. Keep each object on a separate layer. Then redo the area behind those objects.
Maybe you are looking for
-
Can I install a better Intel Core processor into my MacBook Pro?
For example: I have a D2 but I need an i5. Or do I have to buy a whole new computer...?
-
Ul horizontal navigation not displaying correctly in IE6
I am designing a web site for my psychology department and ideally it will display correctly across browsers, including older versions. I've used CS Live to test how it displays, and everything looks great EXCEPT IE6. What percentage of people out th
-
Link to download LR4 SDK is broken
http://download.macromedia.com/pub/developer/lightroom/sdk/LR_4.1_831116_osx10_Debug_SDK.z ip gives a 404 error.
-
Retriving the vaue given in select options in an internal table.
Hi all, I have a requirement of using & printing the multiple values of country given in Select -options by the user. I have given the select -options statement as : s_ctry FOR v_country obligatory. (for selection screen) SO now i w
-
Transfer Recvables & payables to Profit Center accounting
Hi How can we transfer the recieveables & payables to profit center accounting? Regards Samir