Problem when pushing IDOC from SAP to XI

Hi,
    I am trying to push an IDOC from SAP R/3 system to XI. When I processed the IDOC using test tool(WE19), it's showing message that IDOC sent succesfully to R/3 or External system. But in SM58 Transaction it gave error message that in Trabsaction IDX1: some RFC connection error. Then I opened the Transaction IDX1 on XI server, in that IDOC Adapter configuration I gave RFC destination, Logical system name of R/3 and saved it. Now When I tried again to push IDOC from R/3 to it's not giving any error message(in SM58), but I am not able to see any thing in SXMB_MONI. Can anybody guess what's happening? And also I am using fresh newly installed XI server. DO I need to configure something else? All RFC connections are well defined and working fine.

Hi,
It is not required to create Sender Agreement for the Idoc to XI scenario. Because it is implicitly exists.
Can u check Receiver Determination  created in the XI once again. And also check for RFC destinations created in the R/3.
Hope it helps ..
-Moorthy

Similar Messages

  • Error while pushing idocs from SAP to XI

    Dear All,
    For doing ALE configurations for pushing IDOC's from SAP to XI, I am following the following blog posted on SDN:
    /people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
    I am able to create the  model view distribution successfully but when I am clicking on EDIT --> MODEL VIEW --> DISTRIBUTE (which is one of the steps mentioned in the blog), I am getting an error tht
    <b>Target system XIDEV       Communication error occurred
                                              User is locked. Please notify the person responsible</b>
    please tell me what is the error ie which user is locked and how should i proceed now.
    Waiting for your reply.
    Warm regards,
    N.Jain

    hi krishnamoorthy,
    i hve created one RFC in my R/3 system which is pointing to Xi-DEV. So, in the RFC I have used my XI user id & password for loging and the RFC is wrking fine when I am testing tht. I have used my id "XISUPER" in that RFC and it is not locked in XI-DEV. I have not used user id "XI_APPLUSER" anywhere.
    Please suggest.
    Warm Regards,
    N.Jain

  • Problem in  Outbound IDOC from SAP R/3

    Hi,
    I am working on to send an IDOC from SAP R/3 to XI.
    I configured all necessary things as follows:
    1. Created for XI in sender system -- RFC dest, PORT and a partner profile with an outbound parameters and reciever port as XI port.
    2. created for sender system in XI -- RFC dest, PORT(as SAP<SID>) in IDX1 and assigned an idoc type(coming from sender system) to the port.
    Now I am trying to push the IDOC from sender system using Test IDOC transaction and gets success message as data is passed to port.
    My problem is I am not able to see any message in SM58 of XI server.
    Could anyone help me out?
    Thanks In Advance.
    Yaseen.

    Yasseen,
    you hardly see the idocs in Xi in sm58. Try sxmb_moni.
    If you see anything there try sm58 on the sending R/3. There you see if you have connection problems (eg authorization in XI or missing receiver determinitions).
    Hope it hellps,
    helge

  • Problem when sending IDOC from ECC to MII 12.0

    Hi all,
       I have followed the document "[How to Send an IDoc from SAP ECC to the SAP MII IDoc Listener|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/50775783-6cb1-2b10-90b0-e6bc2c0b8563]" to configure the scenario to send IDOC from SAP ECC 6.0 to MII 12.0.
       But when sending 53 IDOCs by Tcode POIT to MII, I have problem as below:
       - 53 IDOCS were successfully outbounded (list in WE02).
       - 8 IDOCs were successfully sent to MII IDOC listener (these 8 IDOCs messages exist in list of Message Monitor).
       - 45 IDOCS were error with message in SM58: "Bean IDOC_INBOUND_ASYNCHRONOUS not found on host xxx, ProgId=yyy".
       I'm wonder why some IDOCs were successful while some others were error. If the bean  IDOC_INBOUND_ASYNCHRONOUS don't exist in EJB, why some IDOCs successful found this bean?
       I have another wonder: in this scenario document, all IDOC message type (SYNCH, LOIPRO) is configured in outbound parameters of RECEIVER (receiver logical system), why they weren't configured them in outbound parameters of SENDER (sender logical system)?
       If some have the same problem and know how to resolve it, could you please help me?
    Thank a lot in advance,
    Vinh Vo

    Hi Vinh,
    Please read the following document:
    [IDOC Listener|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/bpx-community/manufacturing/how%20to%20send%20an%20idoc%20from%20sap%20ecc%20to%20the%20sap%20mii%20idoc%20listener.pdf]
    If you explicitly defined a Prog ID in NW, then you have done an extra step and are confusing NW with the real destination.  
    In basic terms, you set up an RFC destination (with an assigned ProgID) in ERP, then configure MII to point to it. 
    I suggest that you follow the document completely and do nothing else to set up a new listener. 
    If you are not using ECC 6.0, you may find the paths are different,  but the transactions codes are generally the same.  However, you may want to check with some of the older installation instructions regarding specific modifications.  Look in the Wiki for MII under Connectivity.
    Good luck,
    Mike

  • Message SR 053 when i send idoc from SAp R/3 4.6C to PI 7

    Hi,
    I try to send idoc from SAP r/3 4.6C to PI 7. I had made  ALE configuration in my sender system ( SAP 4.6C) but idocs are not sent to PI. In SM58 i have message "Name or password is incorrect (repeat logon)". Yet i'm sure that user and password are correct because if i test RFC destination using SM59 , test is OK.
    Is somebody can help me ?

    Hi,
    In R/3 :
    my RFC destination is type 3 and point to XI. The port in the partner profile  point to this RFC destination. ( all seems good !).
    In Xi : i created a port and i load manually idoc in idx2 to be sure that RFC destination was OK. Nothing in IDX5.
    When i send idoc MATMAS using BD10 from R3 to Xi i have something very strange: first the message B1 038  "1 master IDocs set up for message type MATMAS" and just after
    the XI logon screen  appears !! Then message "1 communication IDoc(s) generated for message type MATMAS" and this idoc stay in SM58 with message "Name or password is incorrect (repeat logon)".
    Somebody can give me requires caracteristics for XI user used in R/3 RFC destination ?

  • Error when generating IDoc from MC document - workitem to all the SAP users

    A workflow item with the subject of “Error when generating IDoc from MC document” is sent to all the SAP users' inbox. Is it possible to stop the generation of this work item? If that is not possible, can we limit sending the work item to a specific user/agent instead of all the users in the system?
    It appears that these work item or error message are generated when one of the developers reopen the POs and add line items. Moreover, during that time the procurement team blocked the IDOCs from going out to the vendors when changing and resaving the POs. Therefore, we need stop the generation of error message/work item when the IDOCs generation blocked.

    Please check Rule 70000141which is the default rule for this task. Inside this rule a FM is attcahed which is reading table EDO13 and EDPP1 where agent is retrieved Probably this table entries are not maintained. This Workflow is getting triggered from Message cOntrol I think.
    Please check this link for
    http://help.sap.com/saphelp_47x200/helpdata/en/c5/e4aec8453d11d189430000e829fbbd/frameset.htm
    <b>Reward points if useful and close thread if resolved</b>

  • Send IDOC from SAP system to IX but can't see any message in SXI_MONITOR

    Hi all,
    I have built up an XI system and configured an IDOC to IDOC scenario between two SAP Systems. After completed all configuration necessary:
    1. Configuration on Source Side (SAP System that send IDOC) and on Target Side (SAP System that receive IDOC) is OK.
    2. SLD is OK: Technical System and Business System are correct for these two SAP System.
    3. Integration Repository: all designed Object is OK.
    4. Integration Directory: all configuration is OK. "Test Configuration" Function is OK.
    5. Runtime WorkBench: is OK. "Test Message"  Function of "Integration Server" is OK.
    In general, it is all OK.
    But when i send an IDOC from SAP System Sour Side (Outbound IDOC from Source Side is OK), on the XI server i can't see any message in Tcode SXI_MONITOR. In this case, my XI server didn't receive any IDOC Message from  this Source Side, and so that my XI server can't process and exchange any IDOC sent from Source Side.
    Anyone can please help me to explain this problem: why my XI server can't receive any IDOC message from SAP System Source Side when all configuration is OK? Do anyone see the same case as this case?
    Thanks a lot for all in advance,
    Best regards,
    Vinh vo

    Hi,
    Possible checks
    At R/3 side
    1) Check in SMQ1 and SM58
    At XI Side
    1) Check in SMQ2 and IDX5
    Check this
    http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/frameset.htm
    Regards
    Seshagiri

  • Sending IDOC from SAP ECC to SAP MII

    Hello,
    Issue while configuring.
    I have configured the RFC Destination in the Netweaver message listener and when i check the connection in SM59 I got  error as timeout during allocate of registered program and I have attached the screenshot of the error page.
    I would request a reply asap.
    Thanks,
    Praveen

    Hi Praveen,
    First, I would suggest that you identify what version, and SP, of MII and ECC.  Also the NW version and SP if applicable.
    Second, use this custom Google search and terms MII, IDoc Listener, and perhaps SM59.  There are many discussions on IDoc Listeners going back a number of years.  Many of the issues with IDoc Listeners have not changed in most of that time, so look at the older ones as well.  I presume that you found and are using my How to Send an IDoc from SAP ECC to the SAP MII IDoc Listener (MII 12.1 to ECC 6.0) to set up your Listener?  If not, you should review your configuration and setup procedure against it.
    I have not looked at MII 14.0 or 15.0, but understand that the configuration of Listeners really has not changed since MII 12.1.  So the document is still applicable.
    Third, roughly 90% of the problems experienced with IDoc Listeners involve multiple uses of the self registering ProgID.  Deleting it in one place, generally does not work.  Use it in one place only.  Create a new ProgID for each separate Listener (either type) on each separate MII instance for each ECC instance.  Save yourself a lot of headaches.  Never, ever reuse ProgIDs!!!
    Fourth, most of the other issues involve a PI/XI system in the middle.  Those are a bit more complicated since they rely on getting the connection configuration set up properly in PI.  Since I am not that familiar with PI systems (most times it is not involved with the Listeners), I generally have to get other experts involved.  Sometimes a CSS ticket is required.
    Regards, Mike
    SAP P&I Technology RIG

  • Push data from sap business one to ECC with XI

    Hi,gurus:
    Have you ever configured the scenario?We wanna push data from sap business one to ECC with XI,and vice versa.
    We know that b1i have this funtion,but in our scenario,we need to create some addon table both in b1 and ecc,so does it mean that I can't use b1i in my special scenario?
    We wanna utilize XI to solve our issue,then the scenario may be abapproxy to soap,or soap to abapproxy.But the problem is, how to program in the b1 side both in sender and receiver.Do you have any information about that?

    Xinjiang,
    The method to connect SAP Business One and ECC 6 using XI would be B1iSN2007.  You could of course develop something your self using ABAP, IDoc and the Business One SDK, but B1i does this today and has 6 built in Business Scenarios.  You can of course customize the existing scenarios and/or create your own much easier and faster than creating the whole thing from scratch.
    If you are specifically interested in not using B1i ... you would want to post your question in the XI forum here on SDN.
    Hope that helps,
    Eddy

  • Error when generating IDoc from MC document

    Hi,
    Our Workflow administrator is getting the following error  in his inbox daily for a particular IDOC type.
    Error when generating IDoc from MC document
    Please let me know how to disable this message.
    Regards
    Elini.P

    Hi  experts,
                i got the error msg when generating idoc from mc document
    this error msg goes to all sap users inbox,how to resolve this problem
    pl give me solutions
    regards
    kumar

  • How to Trigger an IDOC from SAP R/3 to two systems at a time

    Hi experts,
    Can any one please tell me How to Trigger an IDOC from SAP R/3 to two XI systems at a time.
    My current production R/3 system sends a DELVRY03 IDOC to Production XI system ( Name : XIP) .
    I would like to route the same IDOC from production R/3 system to my Quality XI System ( Name XIQ) .
    Problem is production R/3 system triggers an IDOC once. We need to write a logic to route the same to two different systems
    Can any one tell me how can we do that ?
    Regards
    Ram.

    Hello Ram,
    Do you have connectivity between your production & XIQ?
    What does "connectivity" mean?
    1. RFC destination is maintained.
    2. Port defined for the RFC destination.
    If no, create these. (Search in SDN for details).
    If yes, proceed:
    1. Define the logical system for XIQ.(BD54)
    2. Define the same as your partner profile. (WE20). Add the message type SYNCH with the port for XIQ.(This is imp)
    3. Create a distribution model view with sender as "your production" & receiver as XIQ.
    3.1. Add the messages which you want to distribute.
    3.2 Generate Partner profiles.
    No coding is reqd. for this.
    BR,
    Suhas

  • Help needed in transferring IDoc from SAP CRM to XI

    Hi All,
    We are facing an issue in sending an IDoc from SAP CRM to XI system.  The IDoc is triggered and the status is showing as 03 in SAP CRM system(WE05 is used) but it is not getting replicated in XI System. This is verified by logging into XI System and cross checked the records retrieved by executing the transaction IDX5. No entry is found for this IDoc.
    In SM58 transaction, it is giving the status text as EDISDEF:Port SAPRIO segment defn E201CRMXIF_BILLI. 
    Any pointers on this issues will be very helpful. We are able to send information from XI to CRM.
    The project is an upgrade one and the IDocs are developed earlier and were working fine one week back and no changes were made recently.
    Thanks,
    Udaya

    Hi Kapil,
    Thanks a lot for your help. We need to delete and recreate Metadata. This is a typical problem that is encountered during upgrade projects.
    Thanks,
    Udaya

  • How to Trigger an IDOC from SAP R/3 to two XI systems

    Hi experts,
       Can any one please tell me How to Trigger an IDOC from SAP R/3 to two XI systems at a time.
    My current production R/3 system sends a DELCERY01 IDOC to Production XI system ( Name : XIP) .
    I would like to route the same IDOC from production R/3 system to my Quality XI System ( Name XIQ) .
    Problem is production R/3 system triggers an IDOC once.
    Regards
    Ram.

    Hi Ravi,
      Thank you very much for your answer.
    As I am not completely aware of R/3 side,I am getting little problem in understanding your answer.
    Could you please explain the same in some what beter way.. Thank you ..

  • How to push idoc from r/3

    how to push idoc from r/3

    Hello
    We expect you to be able to search the forum to get answers to basic questions such as this.
    - This thread will be locked.
    - No points will be awarded to any of the replies.
    - Your user will be monitored and if this type of questioning continues your account will be closed.
    Please familiarise yourself with the forum Rules of Engagement before posting.
    Rules of Engagement
    https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement
    Regards
    XI/PI Moderator

  • Missing IDOCS from SAP to BODI

    I have an issue of missing idocs from sap going to BODI.
    Idocs are received by BODI trough adapter, but there are idocs that are missing but are successfully sent by SAP. When trying to resend the idocs it was successfully received by BODI.
    We thought that it is an intermittent connection issue, so we try to send idoc from SAP while the adapter was down. The idoc was successfully sent from SAP. Then we try to start again the adapter and it was loaded after sometime.
    Iu2019m now out of idea on why does the idocs went missing. Can someone help me?
    Thanks in advance.

    Hi Parida,
    IDoc Status 03...Green Status... wills not guarantee you that IDoc reached EDI subsystem...
    Run the Program RBDMOIND in SE38...
    Changed on                               :<Date>
    IDocs/Commit Work                   :100
    Display IDoc not sent- Check the Check Box.
    Now you will get list of un posted IDocs
    Ramesh

Maybe you are looking for