Problem when recording from the AUX phono output using creative x-fi elite

Hello everyone?Hopefully someone will be able to help me out here, as I've tried everything, however nothing seems to work. I am using the x-fi elite pro on a windows vista ultimate PC. When recording analogue material, from a tape Dec, for instance, I am using the creative audio console which accompanies the x-fi elite pro. I am using the aux phono input on the back of the box, and everything has gone smoothly until a few days ago. When trying to record from my tape Dec this last week, I suddenly noticed that the sound was very distauted in the left channel. Right channel was fine.Of course the first thing I checked was the level, and this was absolutely fine too, both channels were set to around 50% in the sound-options control-panel. I then checked the cable and then tried it on other equipment as well, and everything was also fine here. I then re-connected it to the audio consul, but got the same results. Fine sounding audio in the right channel, but distauted in the left. I then tryed re-installing the newest vista-driver to see if this would solve my problem, however it didn't. Now I've only got audio in the right channel, but no audio at all in the left. Has somebody inhere experienced anything simurlar, and if yes, can you please tell me what could be wrong??All the best from Allan

On certain mobo/graphics card set ups and some sound cards there is an issue with bus latency. In short while playing back audio you will hear a frequent crackling of the audio. That is not the same as the slight click the Elite pro makes when changing modes. It has been a Creative issue for many years but is only present with certain combinations of hardware. I have experienced that issue myself but several years ago. My current Elite Pro/PC set up does not have this issue.

Similar Messages

Problem when printing from the browser

The report is displayed in the browser properly. We are using rwcgi to view the reports in the browser. But when printed using the print option of the browser, the page setup is taken from the browser's page setup. How do we set the browser's page setup from the reports? Also the fonts are changed to the browser's font. How do we force the browser to take the same font as defined in the reports?
null

Oh my how embarrassing! The only place I neglected to check was in Firefox itself and under File-> Page Setup it was set to 50%. Reset it to 100% and problem solved!

X-Fi Elite Pro - Recording from the Phono Input Prob

Kit:?
Vista x64
4GB Ram
Q6600
X38 Mobo
X-Fi Elite Pro
Audio is taken via?Digital Output (not the optical one) from the External box to a Sony Cinema Amp.
Have installed using the Vista X-Fi CD and updated to the July 2008 drivers.
Problem:
Unable to record from the Phono input on the external breakout box, in fact only the Line-In on the actual card seems to work, but when recording via the Creative Entertainment Console the recording has what sounds like reverb applied to it. Recording via Vista's Sound Recorder produces a clean sound but is in WMA and very low quality.
Other Obvious Problems:
Have to manually select the Input port via Vista's Sounds Panel, by setting the required input as 'default device'.
Headphone socket on the external box doesn't anything coming out of it.
Question:?
Has anyone sucessfully recorded via the Phono input on an Elite Pro under Vista x64, and if so how
Thanks.
Message Edited by 0idsjagf on 08-07-2008 2:56 PM

Huhu, right-click onto the window where all devices like microphone or speaker output are listet (record, playback) (Controlpanel " sound") Then you have the option to enable "show deactivated devices" maybe then the phono input is available to your needs.

Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt

HT3775 can a .mov file be recovered if the record was accidentally shut down from loss of power? i was recording from the AJA Pro Ki when we lost power, the file is there but it wont play and comes up with the message, "The document "SC1ATK63.mov" could n

Can a .mov file be recovered if the record was accidentally shut down from loss of power? i was recording from the AJA Pro Ki when we lost power, the file is there but it wont play and comes up with the message, "The document “SC1ATK63.mov” could not be opened. The movie is not in a format that QuickTime Player understands."

Hi,
Troubleshooting a start up script can be difficult. There are some third party programs that also keep logs of start up programs, however for Firefox this may be different.
Is Firefox a startup program? [http://www.winxptutor.com/msinfo32.htm]
Its also possible to check the Web developer tools for any scripts in a page: [https://developer.mozilla.org/en-US/docs/Tools/Debugger]
In the control panel there is also Administrative tools to view event logs, but this may be something a local technician can walk you through.

HT1414 I am going through the process of unlocking my iphone 4 and have had all the go aheads from my service provider but i am still having problems when i plug the phone into itunes. Has anyone else had this program

I am going through the process of unlocking my iphone 4 and have had all the go aheads from my service provider but i am still having problems when i plug the phone into itunes. Has anyone else had this problem??

Umm, what problem? What actually happens when you try to restore it in iTunes?

I am currently using final cut pro 6 and i have a problem that i can not to do a play out to the dvcam but i can record from the dvcam, can you help please?

i am currently using final cut pro 6 and i have a problem that i can not to do a play out to the dvcam but i can record from the dvcam, can you help please?

I believe there is no "Export to Tape" feature as appeared in legacy FCP.
SORRY! Just noticed you are using FCP 6.
You need to ask this question in the Final Cut Studio forum.
Message was edited by: Ian R. Brown

I am on OS X and i am having problems sending pictures from the new pictures app via email. when i hit the sharing button i have the option to send via iMessage or Facebook but the email option is ghosted and can't be checked off. any suggestions?

I am on OS X and i am having problems sending pictures from the new pictures app via email. when i hit the sharing button i have the option to send via iMessage or Facebook but the email option is ghosted and can't be checked off. any suggestions?

I've resolved my problem now. It wasn't iphoto: preferences:@ that I needed but iphoto:preferences:general where there is the option to choose email for sending photos. Can't believe I missed that before.

I have a problem when buying from within the game

I have a problem when buying from within the game
i used visa..

All games? Settings > General > Restrictions has an option to prevent In-App Purchases. Is that on?

How to handle the failed records from the table when using DB Adapter

Hi,
I am reading some records from table using DB Adapter inside my synchronous BPEL process. Say like reading 100 records from table in between after successful reading of 90 records an error occured in 91st record due some various reasons(like DB down, Connection interrupted etc.). Then how to handle this situation, whether i have to read all the records from the begining and is there any option to continue from where it stopped reading.
Can please anybody help me out in the regard?
Thanks in advance
Regards,
Aejaz

we had the same requirement some time ago and had two option:
1. ask the R/3 development team add a deletion indicator in the table (and thus not actually deleting the record). this deletion indicator could then be used like for any other standard datasource
this option was however refused, due to huge data volume after a while
2. at the end of the load we copied the ZTABLE1 to ZTABLE2. then in the begin of the load (day after) we compare the data of table1 to table2. entries available in table2 but not in table1 are deleted, and we put a 'D'. in deletion indicator; as we only keep the deleted entries for one day, the volume of the new table is acceptable.
M.

Can not delete record from the master block ,frm-40202 field must be entere

hi ,
i have built a form which contain master and details blocks
the problem is
when i try to delete a record from the master block it gives me new serial for the transaction and when i try to save it, it says
>frm-40202 field must be entered
where this field is required and i cant save it
although in another form when i delete from the master it gives me the previous record and it works properly
if any one has any ideas pls help me
thank u
------- the master block has a trigger when-create-recoder
Declare>v_dummy number;
Begin
Select nvl(max(ERNT_NO),0) + 1 >Into v_dummy
From LM_RENT_EXPNMST >Where cmp_no = :LM_RENT_EXPNMST.cmp_no
And brn_no = :LM_RENT_EXPNMST.brn_no>and fiscal_yr = :LM_RENT_EXPNMST.fiscal_yr;
>:LM_RENT_EXPNMST.ERNT_NO := v_dummy;
END;
IF :PARAMETER.RNT_NO IS NOT NULL THEN
     :LM_RENT_EXPNMST.RNT_NO:=:PARAMETER.RNT_NO;
          :LM_RENT_EXPNMST.RNT_YR:=:PARAMETER.RNT_YR;
     :LM_RENT_EXPNMST.CUST_DESC:=:PARAMETER.RNT_ADESC;
END IF;Edited by: ayadsufyan on May 8, 2013 2:03 PM

If this is a FORMS question you should mark this one ANSWERED and repost your question in the FORMS forum
Forms

Incomplete Data on report (report does not show all records from the table)

Hello,
I have problem with CR XI, I'm running the same report on the same data with simple select all records from the table (no sorting, no grouping, no filters)
Sometimes report shows me all records sometimes not. Mostly not all records on the report. When report incomplete sometimes it shows different number of records.
I'm using CR XI runtime on Windows Server 2003
Any help appreciated
Thanks!

Sorry Alexander. I missed the last line where you clearly say it is runtime.
A few more questions:
- Which CR SDK are you using? The Report Designer Component or the CR assemblies for .NET?
- What is the exact version of CR you are using (from help | about)
- What CR Service Pack are you on?
And a troubleshooting suggestion:
Since this works on some machines, it will be a good idea to compare all the runtime (both CR and non CR) being loaded on a working and non working machines.
Download the modules utility from here:
https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip
and follow the steps as described in this thread:
https://forums.sdn.sap.com/click.jspa?searchID=18424085&messageID=6186767
The download also includes instructions on how to use modules.
Ludek

Problem when upgrading from Gnome 3.0 to 3.2 [SOLVED]

Hi,
I've been fighting for 2 days trying to fix this problem: after having upgraded from Gnome 3.0 to 3.2, I can't login anymore (I have this message telling me that something wrong happened and I should try again).
Here is what I tried:
- Removing ~/.config ~/.gconf and ~/.gnome2
- Connecting with a fresh new user
- Reinstalling gnome-shell
- pacman -S cogl
- http://justin.jetfive.com/gnome-32-arch … in-problem
But unfortunately it didn't help...
Here is the output of my ~/.xsessions-errors : http://pastebin.com/4dbMFDsY
[FYI I'm also running xfce4.8]
Any idea?
Thanks in advance!
Last edited by mirelsol (2011-10-20 18:07:53)

I had the same problem when I did the upgrade the very same day of the release. And the solution for me was to login using my battery. For some reason, GDM won't let me in if I'm plugged (I know it sounds crazy, but it works for me)
Best of luck

JTextField update problem when called from PropertyChangeEvent

Hi,
I'm trying to create forms that can be dynamically loaded with Class.forname(formName).
Those forms should always inherit some methods that make it easy to pass data to
them and receive data from them. The idea is that the data comes from a table which
sends a hashmap (String column/JTextField-name + String Value pairs) with firePropertyChanged
as soon as a new row is seleceted. The JTextFields in the form are marked with setName("FieldName") that has to correspond to the name of the columns of the table.
My problem is that I can't update the fields in my form when I'm calling getRow(HashMap)
from within propertyChangeEvent but that's necessary to keep the forms flexible.
JTextFieldName.setText(newText) just won't work. But it works when I call getRow(HashMap)
from the constructor. SwingWorker and threads to update the form didn't help.
I don't need to call pack() / update() / repaint() on the JFrame, do I ??
update() / validate() / repaint() etc. didn't work on the JTextField themselves.
Below is the code for one of the test-forms (just a JPanel that is inserted in a frame)
with all of it's methods. Does anybody have a solution to this problem ??
Thanks for taking time for that !!
Benjamin
* testTable.java
* Created on 15. April 2004, 16:12
package viewcontrol.GUI;
* @author gerbarmb
import javax.swing.*;
import java.awt.*;
import java.beans.*;
import java.util.*;
public class testTable extends javax.swing.JPanel
          implements
               java.awt.event.KeyListener,
               java.beans.PropertyChangeListener {
      * public static void main(String[] argv) { testTable tt = new testTable();
      * JFrame jf = new JFrame(); jf.setContentPane(tt); jf.setVisible(true); }
     /** Creates new customizer testTable */
     public testTable() {
          initComponents();
          HashMap hm = new HashMap();
           * Only for debugging, to see that the method getRow() works when
           * called from the constructor.
           hm.put("ttext", "TEst");
           this.getRow(hm);
      * This method is called from within the constructor to initialize the form.
      * WARNING: Do NOT modify this code. The content of this method is always
      * regenerated by the FormEditor.
     private void initComponents() {//GEN-BEGIN:initComponents
          java.awt.GridBagConstraints gridBagConstraints;
          jLabel1 = new javax.swing.JLabel();
          textIn = new javax.swing.JTextField();
          jLabel2 = new javax.swing.JLabel();
          intIn = new javax.swing.JTextField();
          jLabel3 = new javax.swing.JLabel();
          numIn = new javax.swing.JTextField();
          jLabel4 = new javax.swing.JLabel();
          dateIn = new javax.swing.JTextField();
          jLabel5 = new javax.swing.JLabel();
          dateTimeIn = new javax.swing.JTextField();
          jLabel6 = new javax.swing.JLabel();
          jCheckBox1 = new javax.swing.JCheckBox();
          keepValues = new javax.swing.JCheckBox();
          jButton1 = new javax.swing.JButton();
          setLayout(new java.awt.GridBagLayout());
          jLabel1.setText("Text");
          add(jLabel1, new java.awt.GridBagConstraints());
          textIn.setName("ttext");
          textIn.setPreferredSize(new java.awt.Dimension(100, 21));
          textIn.addActionListener(new java.awt.event.ActionListener() {
               public void actionPerformed(java.awt.event.ActionEvent evt) {
                    textInActionPerformed(evt);
          gridBagConstraints = new java.awt.GridBagConstraints();
          gridBagConstraints.gridwidth = 2;
          add(textIn, gridBagConstraints);
          jLabel2.setText("Integer");
          add(jLabel2, new java.awt.GridBagConstraints());
          intIn.setName("tint");
          intIn.setPreferredSize(new java.awt.Dimension(50, 21));
          add(intIn, new java.awt.GridBagConstraints());
          jLabel3.setText("Number");
          add(jLabel3, new java.awt.GridBagConstraints());
          numIn.setName("tnum");
          numIn.setPreferredSize(new java.awt.Dimension(50, 21));
          add(numIn, new java.awt.GridBagConstraints());
          jLabel4.setText("Date");
          gridBagConstraints = new java.awt.GridBagConstraints();
          gridBagConstraints.gridx = 0;
          gridBagConstraints.gridy = 1;
          add(jLabel4, gridBagConstraints);
          dateIn.setName("tdate");
          dateIn.setPreferredSize(new java.awt.Dimension(50, 21));
          gridBagConstraints = new java.awt.GridBagConstraints();
          gridBagConstraints.gridx = 1;
          gridBagConstraints.gridy = 1;
          add(dateIn, gridBagConstraints);
          jLabel5.setText("DateTime");
          gridBagConstraints = new java.awt.GridBagConstraints();
          gridBagConstraints.gridx = 2;
          gridBagConstraints.gridy = 1;
          add(jLabel5, gridBagConstraints);
          dateTimeIn.setName("tidate");
          dateTimeIn.setPreferredSize(new java.awt.Dimension(80, 21));
          gridBagConstraints = new java.awt.GridBagConstraints();
          gridBagConstraints.gridy = 1;
          add(dateTimeIn, gridBagConstraints);
          jLabel6.setText("Bit");
          gridBagConstraints = new java.awt.GridBagConstraints();
          gridBagConstraints.gridy = 1;
          add(jLabel6, gridBagConstraints);
          jCheckBox1.setName("tbit");
          gridBagConstraints = new java.awt.GridBagConstraints();
          gridBagConstraints.gridy = 1;
          add(jCheckBox1, gridBagConstraints);
          keepValues.setText("keep values");
          gridBagConstraints = new java.awt.GridBagConstraints();
          gridBagConstraints.gridx = 7;
          gridBagConstraints.gridy = 3;
          add(keepValues, gridBagConstraints);
          jButton1.setText("Send");
          jButton1.addActionListener(new java.awt.event.ActionListener() {
               public void actionPerformed(java.awt.event.ActionEvent evt) {
                    jButton1ActionPerformed(evt);
          gridBagConstraints = new java.awt.GridBagConstraints();
          gridBagConstraints.gridx = 7;
          gridBagConstraints.gridy = 2;
          add(jButton1, gridBagConstraints);
     }//GEN-END:initComponents
     private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) {//GEN-FIRST:event_jButton1ActionPerformed
          sendRow();
     }//GEN-LAST:event_jButton1ActionPerformed
     private boolean sendRow() {
          java.util.HashMap hm = new java.util.HashMap();
          Component[] cs = this.getComponents();
          for (int i = 0; i < cs.length; i++) {
               if (((Component) cs).getName() != null) {
                    if (cs[i] instanceof JCheckBox) {
                         String value = ((JCheckBox) cs[i]).isSelected() ? "1" : "0";
                         hm.put(cs[i].getName(), value);
                    } else if (cs[i] instanceof JCheckBox) {
                         hm.put(cs[i].getName(), ((JTextField) cs[i]).getText());
          } // end for
          firePropertyChange("rowChanged", null, hm);
          return true;
     private void getRow(java.util.HashMap hm) {
          //if (! this.keepValues.isSelected()) {
          Component[] cs = this.getComponents();
          for (int i = 0; i < cs.length; i++) {
               if (cs[i].getName() != null && hm.containsKey(cs[i].getName())) {
                    Component component = cs[i];
                    String componentName = cs[i].getName();
                    String componentValue = (String) hm.get(component.getName());
                    if (cs[i] instanceof JTextField) {
                         // output for debugging
                         System.out.println("Setting " + cs[i].getName() + " = "
                                   + componentValue);
                         ((JTextField) component).setText(componentValue);
                    } else if (cs[i] instanceof JCheckBox) {
                         // output for debugging
                         System.out.println("JCheckBox found");
                         JCheckBox cb = (JCheckBox) component;
                         boolean selected = (componentValue == null ? false : (componentValue.equals("1")
                                   ? true
                                   : false));
                         ((JCheckBox) component).setSelected(selected);
          } // end for
          /* Uncomment this code snippet to retrieve the text that has been set
          for the components (that means JTextFields)
          This is just for debugging !
          Component[] cs = this.getComponents(); for (int i = 0; i < cs.length;
          i++) { if (cs[i].getName() != null) { if (cs[i] instanceof
          JTextField) { System.out.println("Value of " +cs[i].getName() + " = " +
          ((JTextField) cs[i]).getText()); } } } // end for
     private void textInActionPerformed(java.awt.event.ActionEvent evt) {//GEN-FIRST:event_textInActionPerformed
     }//GEN-LAST:event_textInActionPerformed
     public void keyPressed(java.awt.event.KeyEvent e) {
          if (e.getKeyCode() == java.awt.event.KeyEvent.VK_ENTER) {
               sendRow();
     public void keyReleased(java.awt.event.KeyEvent e) {
     public void keyTyped(java.awt.event.KeyEvent e) {
     public void propertyChange(java.beans.PropertyChangeEvent evt) {
          if (evt.getPropertyName().equals("newRow")) {
               final PropertyChangeEvent finalEvt = evt;
               Runnable makeChanges = new Runnable () {
                    public void run() {
                         getRow((java.util.HashMap) finalEvt.getNewValue());
     // Variables declaration - do not modify//GEN-BEGIN:variables
     private javax.swing.JTextField dateIn;
     private javax.swing.JTextField dateTimeIn;
     private javax.swing.JTextField intIn;
     private javax.swing.JButton jButton1;
     private javax.swing.JCheckBox jCheckBox1;
     private javax.swing.JLabel jLabel1;
     private javax.swing.JLabel jLabel2;
     private javax.swing.JLabel jLabel3;
     private javax.swing.JLabel jLabel4;
     private javax.swing.JLabel jLabel5;
     private javax.swing.JLabel jLabel6;
     private javax.swing.JCheckBox keepValues;
     private javax.swing.JTextField numIn;
     private javax.swing.JTextField textIn;
     // End of variables declaration//GEN-END:variables

The problem of the change in the form not being comitted is that
I forgot SwingUtilities.invokeLater(makeChanges); in the bottom
part in public void propertyChange(java.beans.PropertyChangeEvent evt)
after having created a new Runnable.
Changes to the UI often have to be comitted by SwingUtitlities.invokeLater()
though I don't know that much about Swing yet.
Thanks to everybody who tried to solve that problem.
Benjamin

I have a problem when I run the DTP

hello
the day before , I load data in a PSA "MASTER DATA" mode full,
then in the morning I load data again this "MASTER DATA."
I can see that the same lines do not not present a problem but the lines were changed, i have a problem when I run the DTP?
I get this messages errors:
.« the time interval & (from/to) for the data
ecords 1 & and 2 & overlaps in characteristic 0COSTCENTER &.u201D
u201CMessages for data records saved; request is red acc. to configurationu201D
best regard
francoise dinatale

As this is a master data load, the attribute change run is mandatory before performing the next load.
The probable reason for this is in the master data table there is an entry for a characterisitic value and the load resulted in another value. The difference between these two records is the object version. Exisitng record will have A version and the changed record has M version.
So when we active master data(attribute change run ) then M version overwrites A version and hence on a net we have only one record in master data table.
Post the above task if we again load master data, as is in your case, then the record will find its place in M version.
As the activation is not performed(probably), the system finds it difficult, with previously loaded M version and currently loaded M version and hence the reason for the message.
Naveen.A

Problem when recording from the AUX phono output using creative x-fi elite

Similar Messages

Maybe you are looking for