Problem when replicating employees using ALE

Hi All
We are using the CRM 7.0. we are integrating the CRM with the ERP HCM (HR) i have assigned an internal number range for the organizational units creation and and external number range for the employees creations as I want to have the same employee number in both systems CRM and ERP . When I am trying to send employee data I got error that the number range grouping has external number assignment, and I should enter the number
Note the employee number range in the ERP is also external as the business requirements
When I changed the number range grouping in table T77S0 to an internal number range the employees are replicated
But I need to have the same number for the employees on both systems
Thanks in advance
Jacopo
Edited by: CRM on Nov 11, 2009 3:44 PM

i used this lnk
Re: External Number Ranges in HR - CRM Integration

Similar Messages

Problem when try to use ACSE+ Windows AD to authenticate two kind of WLAN c

I met a problem when try to use ACSE+ Windows AD to authenticate two kind of WLAN clients:
1. Background:
We have two WLAN: staff and student, both of them will use PEAP-MSCHAPv2, ACSE will be the Radius server, it will use Windows AD's user database. In AD, they create two groups: staff and student. The testing account for staff is staff1, the testing account for student is student1.
2. Problem:
If student1 try to associate to staff WLAN, since both staff and student WLAN using the same authentication method, the auth request will be send to AD user database, since student1 is a valid user account in AD, then it will pass the authentication, then it will join the staff WLAN. How to prevent this happen?
3. Potential solution and its limitation:
1) Use group mapping in ACSE(Dynamic VLAN Assignment with WLCs based on ACS to Active Directory Group Mapping), but ACS can only support group mapping for those groups that have no more than 500 users. But the student group will definitely exceed 500 users, how to solve it?
2) Use methods like âRestrict WLAN Access based on SSID with WLC and Cisco Secure ACSâ: Configure DNIS with ssid name in NAR of ACSE, but since DNIS/NAR is only configurable in ACSE, don't know if AD support it or not, is there any options in AD like DNIS/NAR in ACSE?
Thanks for any suggestions!

I think the documentation for ACS states:
ACS can only support group mapping for users who belong to 500 or fewer Windows groups
I read that as, If a user belongs to >500 Windows Group, ACS can't map it. The group can have over 500 users, its just those users can't belong to more than 500 groups.

I just installed yosemite on my mcb pro mid 2012 and installed win8.1 with bootcamp. now i have the problem, when i'm using windows i don't see my mac partition in the "computer" window. there is only the "bootcamp (c;) partition? what's the problem?

i just installed yosemite on my mcb pro mid 2012 with a clean install. so i only had the new os x yosemite running on my mac. everything went perfect. than i installed win8.1 with the bootcamp assistant and also everything went perfect.
But here's the Problem:
When i'm using Windows 8.1 and i go to the "Computer" window where i can find my hdd partition "Bootcamp (c;) there is only this Partition. the mac Partition is missing.
so i am not able to read the files on my mac Partition.
Before i installed yosemite and win8.1, i was running mavericks and win7 on my macbook pro and i haven't had this Problem. i was able to see and read my mac Partition also on Windows 8.1???
is there any solution for this Problem???
greez c

"Before i installed yosemite and win8.1, i was running mavericks and win7 on my macbook pro and i haven't had this Problem. i was able to see and read my mac Partition also on Windows 8.1???"
Sorry there's a mistake in the sentence!
i mean:
"Before i installed yosemite and win8.1, i was running mavericks and win7 on my macbook pro and i haven't had this Problem. i was able to see and read my mac Partition also on Windows 7???"

Problem when try to use 2 computers

Hello there.
I'm now facing a problem when try to use 2 computers. Specifically, I downloaded my ebook (pdf form) in my laptop and open it without problems. But when I tried to reopen the same book (from human kinetics site) to my pc, the known message revealed ("E_LIC_ALREADY" etc etc).
As I realised, in my laptop, the ADE wasn't authorized (in fact, "is authorized without an ID"). I tried but didn't achieve to authorize it (it's not accepting my username and password, saying that the specific ID is already used, obviously when I made the similar procedure on my pc, a year ago), whereas I'm also not able to re-open the book in my pc (I made copy-paste to the appropriate folder of my pc, by the way...). What's the solution in this case? I mean, it's very annoying for me and I desperately want to solve it...
Thank you in advance,
Nikolas

Answer 1 : Really not quite sure about this ....
Answer 2 : turn the card upside down and check the model number .. the model number would be WPC54G and if there v2/v3/v4 after it it means that the card is version 1 ....
Answer 3: As you windows xp , go to start >> programs >> uninstall wireless notebook adapter.... insert the CD for the adapter ...take the card out and insert it back again.... follow the instructions on the found new hardware wizard ... this will install the drivers for the adapter and then you can use the windows wireless configuration utility to connect to the wireless network ....

HT201415 actually i am use iphone5 in bangladesh. But i am facing some problem , when i am useing the internet over cellular data network. when i am open the cellular data on but no icon E display but when Enable 3G on-of then E is aviable.its a device pr

actually i am use iphone5 in bangladesh. But i am facing some problem , when i am useing the internet over cellular data network. when i am open the cellular data on but no icon E display but when Enable 3G on-of then E is aviable.its a device problem or Carrier ?

Hafizur Rahman wrote:
when i am open the cellular data on but no icon E display but when Enable 3G on-of then E is aviable.its a device problem or Carrier ?
Problem? I'm not even sure what your problem is, much less whether it's a problem with the phone or the carrier.

I have an audio problem when ever I use my Firefox web browser that makes a sharp audible sound simiular to a video game gun shot sound effect when ever I go into a new web page?

I have an audio problem that when ever I use my Firefox web browser it makes a sharp audible sound similar to a video game gun shot sound effect when ever I go into a new web page? I change to a new site or page a page on a site, I get an audible gunshot ping trpe sound? It happens almost every time. Its very annoying and is driving me nuts???
Any body out there had this happen also or know how to diagnose and fix this type of problem? I would hate to have to delete my whole Firefox program and have to start over again. If that is the case I will probably just scrap it and go on to try Google Chrome instead. I already have GC partially set up. I really have liked Firefox up to this point. I know add ons can cause problems at times but I haven't added anything new lately and this just started happening?

Hi,
Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode].
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]
Safe mode disables the installed '''Extensions''', and themes ('''Appearance''') in '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''. Hardware acceleration is also temporarily disabled - the manual setting is '''Tools''' > '''Options''' > '''Advanced''' > '''General''' > '''Use hardware acceleration when available'''. [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Advanced%20panel?as=u Options > Advanced]. All these settings/add-ons can also be individually or collectively disabled/enabled/changed in Firefox normal mode to check if an extension, theme or hardware acceleration is causing issues.
[https://support.mozilla.org/en-US/kb/Options%20window Options]

Problems when creating form using wizard

i use the data block wizard to create a form but one of my field, i use a radio button.in the layout editor, the radio button did not appear.how can i make it appear on my screen?
i have another problem.
how can i use the colunm of two tables when using data block wizard to create one data block?

Hello Nicky,
You can place the "Signature Field" in the form and ask your users to sign the file before submitting it via email.
Regards,
Anoop

I have a problem when I am using the SIRI

Hello I have an iphone when I am using the SIRI and want to call a contact with the # 995*******, you can not make the call.
The ISP provider is movistar.
<Edited By Host>

Sign in problems when trying to use Skype WiFi

I have a tablet that I am trying to connect to Skype WiFi and keep getting looped around to the sign-in screen. It tells me "You're already on line", but I can't do anything after that. I just have the "Learn More" button. I have unstalled and installed Skype WiFi twice and it still will not open. None of your instructions or guide are helping me.
Need Help
Added the text, "...when trying to use Skype WiFi" to the subject/title for clarity.

hi,
The call to the function 'wwpre_api_util.get_names_table' is not returning any data. so, you are getting an exception. Try adding an exception block for NO_DATA_FOUND and print some message.
--Sriram

Various problems when trying to use both my iPhone 4 and iPhone 5 at the same time? HELP!

I am experiencing a wide range of problems with both of my iPhones. They are both a 4 and a 5. I will list the problems I am having.
Using both phones:
A few weeks ago I recieved a new phone, the iPhone 5 as my contract was renewed. I backed-up my old phone, the iPhone 4 to my computer and restored it onto my 5. But when using my 5, I discovered it has 'no service' (but will use wifi), it won't send IMs OR texts and Apple constantly keeps asking me for my Apple ID which i recently changed but still uses the old email, and won't accept any passwords.
The 5 used to send IMs and texts but they would be sent to my friends through my email address, so I googled this and went to messages>send and recieve, and the only thing i can select is my email, not my number. I am using the 4 as well, purely so I can send texts and IMs through my name, not my email. The 4 also has signal and wifi, whereas the 5 only has wifi. I am wondering if the 5 has no signal and won't send IMs & texts because I am still using another phone? Surely they both cannot work together, so I was thinking I could reset my iPhone 4, and then see if the iPhone 5 will work, once the second phone isn't used anymore. If that doesn't work, I thought I could reset my 4, back-up my 5 and then restore again. I think that will work, but I have no idea.
I have absolutely had it with trying to figure it out, I have used google but nothing seems to work. I am really hoping someone can tell me what to do with all my phone problems, because they are absolutely driving me mad!!!!!!!!!!!!!!!!!!!
I need to use the 5, it is costing me an extra £60 a month to use and I feel as though that money is being wasted as I can't text, IM or call people. Should i just get rid of the 4 and see what happens? I read online that to stop iMessages coming through as your email, you should turn it off and use regular texts. BUT I DO NOT WANT TO DO THIS. I send way too many texts, and it would cost a fortune. I also can't send photo messages on texts, because they cost a bomb to send through. I want to be able to use both texts and iMessages - using my name, not my email.
To add on to that huge essay I have written, on both phones Apple CONSTANTLY asks me for my Apple ID which I recently changed. I changed the email and the password, and it is coming up with the wrong email, and whatever password I put in, it still says it is wrong. It doesn't make sense, because yesterday I purchased some music from iTunes and when asked for my Apple ID, it used the right email and accepted the correct password. ...??? yet it still keeps getting it wrong, even though it worked in iTunes. ??!?
Okay so I just reset my iPhone 4, and nothing seems to have changed...I thought if I reset it, it would be completely wiped, like a brand new iPhone 4, but it's not....THIS IS SO IRRITATING! Can someone please help me! I GREATLY appreciate any answers, hopefully someone on the internet can fix my problem! thank you for taking the time to read this essay, I am very thankful. PS. Both phones are up to date.

You said, "the 4 also has signal and wifi whereas the 5 has only wifi". By "signal", I'm assuing that you mean cellular signal. If so, that means your iPhone 4 is still active on your cellular number and your iPhone 5 is not. Contact your carrier to sort out which phone is active on your account.

Encounter problem when I'm using JTextArea

hi everyone:
I have less experience on Swing development. Recently, I encounter a weird problem. I have a JTextArea component which it was populated on JInternalFrame, and when I try to switch an inputmethod(Actually is Chinese inputmethod). the application will hangs up. at this time I drag the frame, the title bar will display string with "no response". but if I only type English words, without shift to other inputmethod. it works fine. Please give me some suggestion and help. Thanks you guys in advance.
Mikael

conch_fish wrote:
Please give me some suggestionYou've got a bug somewhere. Perhaps you're tying up the EDT, but who knows.
and help. This is extremely hard to do without seeing code.
Your best bet here is to show us your code. We don't want to see all of it, but rather you should condense your code into the smallest bit that still compiles, has no extra code that's not relevant to your problem, but still demonstrates your problem, in other words, an SSCCE (Short, Self Contained, Correct (Compilable), Example). For more info on SSCCEs please look here:
[http://homepage1.nifty.com/algafield/sscce.html|http://homepage1.nifty.com/algafield/sscce.html]
Again, if the code is compilable and runnable more people will be able to help you.
Also, when posting your code, please use code tags so that your code will retain its formatting and be readable. To do this, you will need to paste already formatted code into the forum, highlight this code, and then press the "code" button at the top of the forum Message editor prior to posting the message. You may want to click on the Preview tab to make sure that your code is formatted correctly. Another way is to place the tag [code] at the top of your block of code and the tag [/code] at the bottom, like so:
[code]
// your code block goes here.
// note the differences between the tag at the top vs the bottom.
[/code]or
{code}
// your code block goes here.
// note here that the tags are the same.
{code}good luck

WSIF generation problem when enum is used

All,
We are currently developing EJB 3.0 and are exposing them using WSIF to the BPEL process. We have some enum class and when we generate WSIF we are getting JAX-RPC complaint problem.Has anyone faced this problem and do we have solution for the same?
regards,
M.Rajesh

I guess ENUM is problem with OC4J Web Services stack all way along. Usually ENUM is supposed to be exposed as xsd:restriction or so. I had metalink issue open for it.
Chintan

Problem when trying to use Google WebService with abap

Hello,
I want to call a Google webservice from abap but I can't create the proxy class.
The WSDL of this webservice is located at
[<a href="http://api.google.com/GoogleSearch.wsdl">http://api.google.com/GoogleSearch.wsdl</a>
When I try to create the proxy class with transaction SE80, I have the following error message (SPRX046) : Proxy generation terminated: Message must have exactly one part

Does anyone have an idea to solve this problem (We are in ECC 6.0 NW 2004S) ?
How can we do if <message> has multiple <part> entries ?
Thanks
JLG

hi,
you can't create a proxy for the google API because Google's webservices are RPC style and the proxy wizard of WAS ABAP on NW2004s supports document style webservices only.
Search Google for the keywords mentioned and you'll find a lot of discussions and explanations of the difference of these two styles.
regards,
anton

Problem when call rfc using function control

i try to call rfc using functin control but error "wdtfuncs error '800a03eb' Fail to call Remote Function Module" be popuped.
my code like that:
Set objSAPFunction = Server.CreateObject("SAP.Functions")
 Set objSAPFunction.Connection = objSAPConn.NewConnection
 IsLogOnSAP = False
 If objSAPFunction.Connection.Logon(1, True) Then
 IsLogOnSAP = True
 'Upload Cancel Invoice
 Set objFunc = objSAPFunction.Add("ZRFC_SD_BILLINGDOC_GET1")
 Set objISGR1 = objFunc.exports("DOCUMENT")
 Set objISGR2 = objFunc.exports("COMPANYCODE")
 Set objISGR3 = objFunc.exports("YEAR")
 set objOSGR1 = objFunc.imports("NETVALUE")
 set objOSGR2 = objFunc.imports("CURRENCY")
 set objOSGR3 = objFunc.imports("DATE")
 set objOSGR4 = objFunc.imports("CUSTOMERCODE")
 set objOSGR5 = objFunc.imports("CUSTOMERNAME")
 objISGR1.value = cstr(doc)
 objISGR2.value = cstr(companycode)
 objISGR3.value = cstr(year)
 bResult = objFunc.Call <<<<< Error
 GetDataFromSAP = Array(cstr(objOSGR1),cstr(objOSGR2),cstr(InvDateFormat(objOSGR3)),cstr(objOSGR4),cstr(objOSGR5))
 If IsLogOnSAP Then
 objSAPFunction.Connection.Logoff
 End If
 End If
These code can run on the A machine, but do not run on the B machine. And both two machines have been installed SAP FrontEnd.
which problem about it?

To change all definition of parameters of the function from type to like may be solution.

Get problem when create dimension using dimension build rule file

I got the following warning when I tried to load dimension. I have a product dimension hierarchy which contains 6 levels. I manually create a dimension call product which include six generations. I also create a rule file using SQL. This SQL selects 6 columns and I map each column to each generation. When I load data to build dimension, I always got the following warning and only some part of data get loaded. Anybody know that? Do I have to load parent first before loading child or I can load them at same time?
Thanks
\\Record #1 - Incorrect Parent [10] For Member [10] (3307)
1 2 3 10 10 171
\\Record #2 - Incorrect Parent [1] For Member [1] (3307)
1 1 1 8 8 39

You are getting duplicate names. YOu need to prefix or suffix (or sql concatinate) to make the members unique. in the record 1 example you might want the outpout to look like
Product line 1 Group 2 subgroup 3 Product family 10 product 10 sku 171
Of course I used full names to make it undersatandable, some would use one, two or three letter abrevaitions.

Problem when replicating employees using ALE

Similar Messages

Maybe you are looking for