Problem when saving files (file already exists-)

Woking in CS5.1.
When I save a document (as opposed to "save as"):
I get a message "some of the specified files already exist in the target location. The files marked below will be replaced".
The file I am working on gets saved, but creates a second version "file name-01.ai"
Any ideas?

Works fine here CS5 on Windows.
When I save, it will warn me only if the file with the same name already exists and if I choose to replace it it will replace the existing file keeping the name I'm saving it with.

Similar Messages

  • Adobe bridge crashes when saving illustrator files

    Hi there,
    We are developing custom connector using Adobe Drive SDK for our DAM system, the integration with CS was working fine, we recently updated Adobe Drive to 4.2, and we are encountering bridge crashes when saving illustrator file. It didn't happen with older version(4.0.2) of Adobe Drive, not sure why. I pin point the part that causing the issue: in our custom connector, we have READ_XMP_METADATA capability which we need to display the thumbnails and previews, and in the ftp sample connector, this capablity is not included originally, so the issue does not happen, but if I add this capabilty, the crash issue happens as well. If we exclude this capablity from our connector, this crash issue doesn't happen.
    We noticed this only happens when saving illustrator file, not photoshop or indesign, and it seems that only in illustrator, when save, and the bridge has the current file folder showing, we are seeing there are twice folder refreshes, and usually it will crash after the second time. In photoshop and indesign, we don't see folder refreshes. If switch to other folder, the crash won't happen. We tested on both windows and Mac, on Mac, this seems happen less often. Another thing we noticed is in debug mode, or we have many debug logging turned on, the crash happens less often, if it is deployed with no debug logging, the crash happens almost everytime. So we are guessing it might be some synchronization problem. 
    Could you please advice what's the cause of this issue?
    Thanks,
    Katherine

    Has it ever worked?
    What kind of files are they and where do you save them?
    Is a printer connected, set up and turned ON?
    Have you already tried resetting the preferences?
    Generally it's not a good idea to just save old files, because then some artwork may be automatically flattened. Illustrator will save the file to the old version file-format and if you used new features in-between, those cannot stay live in the old version file format.

  • File name already exists?

    The past few days, I've had trouble exporting certain sequences from FCPHD using Compressor 2. Basically, when I go to export via compressor, the error "File Name Already Exists" pops up. However, the sequence still appears in the compressor window. I then try and compress the sequence, but my Batch Monitor then fails with the following error: Media Server Application Unexpectedly Quit. Does anybody know why this would happen all of the sudden? Is it a sequence setting or a setting in comrpessor. Please help. Thanks!

    Hey Jae233,
    the first error you are receiving from compressor of "File Name Already Exists" simply means that you are trying to compress the file, with an exact name, to the exact destination thats it. try renaming your export from either QT or FCP, then when you compress in compressor, as long as you name your file, something else, like a *_V2.mov, instead of *.mov, then you wont have that problem. the reason it still appears in the compressor window is because compressor is trying to write over the file, or replace it if you will.
    as far as batch monitor quiting on you, it might be related to actually trying to write over the file. this might be a bug, since it should write over the file. so just delete the original or faulty file (the *.m2v) and or rename your new file, and you shouldnt have any more problems!
    Mikey m.

  • Excel Hangs when saving a file

    Hi
    When saving a file (CTRL+S) excel hangs, no error or anything.
    This happens on Windows 8 PRO, on Win7 no problem at all.
    Tried on EXCEL 2010 and EXCEL 2013 Customer Preview.
    Checking the file after the app crash shows no file exists however 2 files exist instead:
    *.TMP file
    *.[NOTHING] file
    The *.TMP is the new file i just saved, if I change it to *.XLSX it works fine, no curroption.
    This was done saving on DESKTOP.
    Since file was saved I assumed there is some kind of permission error so I changed the directory permission for "C:\Users\MYUSER\DESKTOP" to "EVERYONE".
    With this setup excel saves without a problem....
    I guess EXCEL tries to save under  a different user which has no permission but why no error?
    Any ideas?

    Hi,
    Check to see whether the user you logged on to the system has the permission to the file.
    Also, check to see whether the following link is helpful:
    http://support.microsoft.com/kb/271513
    http://support.microsoft.com/kb/313937
    And, based on my research, hang when saving the file also maybe caused by a printer installation.
    Check to see the following link:
    http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2012/04/12/excel-hangs-or-becomes-unresponsive-when-saving-or-closing-a-workbook.aspx
    Jaynet Zhang
    TechNet Community Support

  • The niFPui.mxx plug-in caused an exception in the CmxAggregateItemUI::InvokeCommand function in the NIMax process. When saving *.iak file in MAX4.6

    The niFPui.mxx plug-in caused an exception in the CmxAggregateItemUI::InvokeCommand function in the NIMax process. When saving *.iak file in MAX4.6
    Hi There,
    The subject header just about says it all. This is the first action I took with MAX - it is a fresh install. The file I wanted to save was still written and the FP seems to be working ok. However, I need to know what happened.
    I can't post the whole log file due to the amount of characters allowed on this post. I can cut and paste sections if there is a specific part of the file you need. Below is the first section and last section.
     Context where exception was caught:
    Func:
    CmxAggregateItemUI::InvokeCommand Args: plugin=niFPui.mxx Item=0107EAB1
    cmdID.cmdId={4A36174B-EC0C-4D73-A23D-F15D164542DE} cmdID.index=0
    Application   : C:\Program Files\National Instruments\MAX\NIMax.exe
    User Name     : slaney
    OS Version    : 5.1.2600 (Service Pack 3)
    Exception Code: C000001E
    Exception Addr: 457BC448
    Return Address: 457BC448
    Function Name : nNIFPServer::tFpLinearScaleRange::`vftable'
    Module Name   : FieldPoint71
    Parameters    : F001008E 7800FDDD C5100DFC EC0107EA
    Source File   : (not available)
    Return Address: 481000C3
    Function Name : (not available)
    Module Name   : (not available)
    Parameters    : 00000000 00000000 00000000 00000000
    Source File   : (not available) 

    Hi,
    I did a research on your error message and it seems this problem was introduced with MAX 4.6. This version switched to a new error reporting mechanism and reports even errors that are which are not critical to your task.
    These errors typically show up as "unexpected" and if your error falls into this category have a look to this KB for further assistance.
    If it doesn't fall into this category, your could try to go back to the MAX 4.5 or 4.4.. Of course you would need to reinstall some components and might not be able to use newer drivers at all.
    Let me know.
    DirkW

  • FrameMaker crashes when saving a file as XML

    Hello -
    I am encountering a problem saving a .fm file as a .xml file. I have saved many .fm files as .xml files in the past with no issues. However, lately FM crashes with a "serious error" on certain files when I try the same save process. My initial thought was that the file was somehow corrupted, but this morning I ran into this scenario: I have 3 FM licenses in my office, I was trying to save a .fm file as .xml and FM kept crashing. So I had another co-worker try to save the exact same file as a .xml file and it WORKED!?!?!?!
    We all were using FM 11, but I have since installed FM 12 thinking that version 12 wouldnt have the same problem, but the same issue is happening with both versions of FM. I read that FM has issues when working across a network so I have tried it both ways, across the network and locally and the same issue occurs.
    Again, this problem occurs occasionally on various files - not every file, but as previously mentioned I was able to successfully save a file on a different machine that I could not save on my machine. I have the most recent log file that was generated after a crash:
    [*** LOG FILE REMOVED BY MODERATOR***]
    Thanks in advance for any help in this matter.
    Gavin

    An update -
    So FM now appears to crash "sometimes" when saving as an xml file AND when saving the file in general. I have 3 machine with FramMaker installed, first with version 11 now with version 12. These 3 machines are all identical as far as SW running on them, etc... I have been unable to detect a pattern as to when FM will crash thus far. Sometimes it will crash when I try to save the file as an .xml file and sometimes it will save just fine. I have resorted to marking up the document a little at a time, saving the file, then trying to save as an XML file. It will work sometimes and other times it will crash. Sometimes it crashes when trying to save the .fm file other times it works; sometimes it will crash when I try to save the .fm file as a .xml file, other times it will work. About the only thing in common that I have found thus far is the fact that it happens with the same file over and over again; meaning that if I have a pool of 12 files that I need to load into FM and markup, 11 of the 12 files may work just fine and the 12 file will not - it will crash FM at some point in the markup/saving process every time. One might guess that the original file is somehow corrupt and that may be, but at this point I am not sure how I prove that is the case as FM seems to load it in just fine and I can save it right off the bat just fine. Does anyone know how I can prove that the structured file i receive initially is corrupt when it loads into FM fine? If we were causing some issue with the import of our modified EDD then why dont we have the same issue with the other 11 files in the batch as they all are using the same EDD?
    I have sent my most recent log files to adobe tech support this morning. I have tried saving files on shared drives as well as on local drives. I have tried the same process on the other workstations with the same results.
    Does anyone have ideas on how I can isolate a problem with the source file (structured doc) or on why FM is crashing when I perform these actions?
    Thanks,
    Gavin (Ryan)

  • How automatically saving a copy when saving a file?

    Hi,
    For my pictures (RAW and PSD) I use a separate external disk, our Timecapsule would be full in a year. My work flow in copying is normally no problem. But of course now my iMac drive is 'broken' I find a few PSD-files not be copied to the external drive. I wondered, is there a simple way to automatically save a copy when saving a file (and replace an earlier version of the copy)?
    Murk

    Thanks. FWIW I'm very keen on improving tethering and lobbied Adobe endlessly until they added the overlay for shooting into layouts because it was a major reason why some of my clients were unable to switch to Lightroom from PhaseOne. But we have to be realistic and remember that tethering just isn't a key market for Adobe as it is for PhaseOne, so progress is painfully slow. For example, where is live view or setting exposure which are in PhaseOne? I'd be amazed if we get those features for a few versions, and that's why I point serious tethered shooters to other solutions. And realistically, assuming your understanding of the SDK is correct you shouldn't expect a change until the next full version of Lightroom.  Good if it happens, but I wouldn't bet on it.

  • Good day! When saving a file in Illustrator, I can not keep the older version. How You can save the file in an older version?

    Good day! When saving a file in Illustrator, I can not keep the older version. How You can save the file in an older version?

    When you save a file that's what options offers application
    05 мая 2014 г., в 13:40, Jacob Bugge <[email protected]> написал(а):
    sage go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click theStop Email Notifications link.

  • When saving a file in [.jpg] format, i am asked to choose a quality from 1 to 100. what changes in the file created based on the quality parameter chosen?

    when saving a file in [.jpg] format, i am asked to choose a quality from 1 to 100. what changes in the file created based on the quality parameter chosen?. i would like to know what changes, so in the future i can set my camera to a setting that will give me the highest quality to begin with,allowing me to make crops and still preserve the quality.
    thank you
    dovid

    It's the level of compression. Lower number, more aggressive compression, more visual artifacts.
    Aside from that you should never use jpeg as a working format. The compression is destructive and cumulative, and the file deteriorates every time you resave it.
    Use TIFF or PSD, and if you need jpeg save out a copy as a single final step.

  • When saving a file i don't see the progress

    When saving Numbers files I use to see the progress of the save.  I no longer see its progress.  The files are being saved.  Any reason why this is happening??
    tj

    I'm on OS X 10.7, your profile says you're on 10.6.8, so i can't duplicate what you are seeing. If I was to guess, I'd say it is related to changes made for Lion where versions are  periodically saved automatically in the background, where you wouldn't want a progress window always popping up. "Save" has become "Save a Version" and, though I hadn't noticed, probably also does not pop up a progress window..

  • Why aren't all view options available when saving a file from Adobe InDesign CC 2014 on OS X Yosemite?

    Why aren't all view options available when saving a file from Adobe InDesign CC 2014 on OS X Yosemite?

    ASk in the ID forum and explain better what you actually mean.
    Mylenium

  • Hi, i have problem, when i press " File Import Video Frames to layers " please i need solve it fast. waiting.....

    hi, i have problem, when i press " File > Import >Video Frames to layers " he say to me [could not complete the video frames to layers command because photoshop does not support video on this version of windows]  so please i need solve it fast...

    We can't know. You have not provided any system info, no details about your video files nor do we actually know what version of what program you are referring to.
    Mylenium

  • Kate and kwrite (14.12) selecting encoding when saving a file.

    How can someone select encoding when saving a file?
    Old save dialog:
    New save dialog:

    No, you can't.
    It changes in what encoding a file is *shown*. It does not affect in what encoding a file is *saved*. I think it is a bug, or a forgotten feature. I've downgraded kate because of that(looks like only solution).
    And there is the bug report I've reported about issue:
    : https://bugs.archlinux.org/task/43577

  • When saving certain files get the error "Error saving file..."

    When saving certain files get the error "Error saving file..." Seems to have trouble saving the temp files. tried dumping my workspace and prefs. No change. Other files work fine.

    Try deleting the iPod Photo Cache folder.  For its locations see:
    iTunes: Understanding the iPod Photo Cache folder

  • Problems when reading pdf files

    I use windows 7, and also have available Adobe Reader 5 and Adobe Reader X, but i receive some problems when reading pdf files. What can I do???

    Reader 5 is not Windows Compatible. Two different versions of the same computer can cause all sorts of problems. Remove all Acrobat and/or Reader software then re-install Reader X.

  • Problem when saving business partner on creation or changing

    When i create a business partner in fmcac1 it is taking an eternity when saving. i am also encountering the same problem when saving changes in transaction fmcac2. its hanging when i click the save button but if i terminate the job the changes woul have been made. what might be causing the problem.
    When i terminate the process am getting the message as shown below
    Dev: SAP System message
    Panic: Unrecoverable errors occured

    well there are really many possibilities for that.
    have you once waited, if the task will finish?
    if it does finish i would suggest to do a SQL-Trace with TA ST05.
    If this is possible, the performance trace will show you quite by detail where your process time is beeing used.
    To find out why so much time is used in that position then is another thing.
    But once you got the problem identified you should be able to exlude some reasons like (inperformant selects or such).

Maybe you are looking for