Problem when Selecting keyframes with marquee tool

I'm working through Lesson 7 of Mark Spencer's Motion 4 book and in section "Working with multiple keyframe curves." In step 7, he says to "drag a marquee to select all middle Scale keyframes to reveal their Bezier handles." I do this and then change the keyframe curve by moving the Bezier handle. But it only affects the Transform.Scale.X parameter, not Y and Z. But all three parameters are indeed selected. What is going on?
Message was edited by: chip grabow

Cleared this up myself: When I would try to adjust a bezier handle, I was holding down the shift key to constrain the handle's horizontal movement. That resulted, for some reason, in only selecting one parameter, the Scale.X point. When I stopped holding down Shift, the adjustment worked as advertised.

Similar Messages

Hi! Has anybody succeeded in using Presonus Audio box 22 vsl with Os Mountain Lion? They doesn´t seem to connect. No problems when i used with Snow Leopard. I upgraded: Now is Kreonika not happy. Not happy at all!

Hi! Has anybody succeeded in using Presonus Audio box 22 vsl with Os Mountain Lion? They doesn´t seem to connect.
No problems when i used with Snow Leopard. I upgraded: Now Kreonika is not happy. Not happy at all!

In cases like this, if you have an Apple store near by, they will most likely install the OS free of charge for you, if you can't bring your Apple ID along to prove you've paid for it.
Would that work out for you?

Itunes bombs outs when selecting "store" with UBD.exe issue

Itunes bombs outs when selecting "store" with UBD.exe issue - what is the remedy?

Hello there, tuneasa.
The following Knowledge Base article offers some great steps for troubleshooting issues with iTunes performance:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Problem with Marquee Tool

I'm having a problem in Photoshop 7.0 where I can't see the borders of the selected area while dragging the cursor. Once I release the mouse button I can see the borders OK, but not while dragging. This makes precision selections difficult. It seem to happen with any tool used to select an area i.e. marquee, lasso, pen, etc. Any suggestions would be most appreciated.
Thanks,
Perry

The first thing to try is resetting the tool.
If that doesn't help try resetting your preferences as described in the FAQ.
http://forums.adobe.com/thread/375776?tstart=0
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.

Photoshop lags when i use the marquee tool

I recently updates to Photoshop CC (2014) and ever since I did I have been having problems with lag when using the Marquee tool. I have tried reinstalling Photoshop and even downgrading back to CC but it doesn't help. Does anyone know what causes this?

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Selecting type with text tool - grabbing lines

This is has happened in the past but much more so with my current version of illustrator (I have CS2). When I use the text tool to revise text, it seems to want to select whatever lines are closest to the text rather than the text. This is very frustrating - I want my text tool to select whatever TEXT it is closest too, not lines. Is this a fault of the program or is there a setting somewhere I can change to make this happen less, or preferably, not at all?

Pressing Alt is
supposed to force-toggle the infuriating text tool between the TypeTool and the TypeOnAPathTool.
So if the path that you don't want to turn into a PathType object is an open unfilled path (like a manually-drawn underline, and it is in front of the text object you want to edit, this seems to work, when the TypeTool is selected:
1. Press Ctrl to momentarily invoke the most recently-used pointer. Select the underlying text object.
2. Release Ctrl. The TypeTool cursor returns. Note that when the cursor is in proximity to the path, it changes to the TypeOnAPathTool cursor (the one with the wavy line).
3. Press Alt. Note that the cursor changes to the TypeTool, and has a circle around it. Click and you should enter the text, not create a PathType object.
However, as far as I can figure out (actually, as far as I can bear to muck with this awful interface), this does not work correctly if the unwanted path is filled. Try this:
1. Create a text object with some text in it.
2. Draw a filled rectangle that overlays just part of the text.
3. TypeTool: Press Alt to momentarily invoke a pointer. Click the text object to select it.
4. Release Alt. TypeTool comes back.
5. Hover within proximity to the filled rectangle. The cursor becomes the normal TypeTool cursor enclosed in a circle.
This suggests that a click will enter the text, not create a PathType. Alas, it creates a PathType anyway. Try it again, this time pressing Alt. Pressing Alt makes the cursor change to the TypeOnAPath cursor, with no circle around it. Clicking creates a PathType.
Worst text-handling interface I have ever seen.
JET

How to solve crash problem when doing "package" with Indesign CS 5.5?

Hello everyone,
I've been having trouble with Indesign CS 5.5 when I use the package tool.
I work with indesign for a long time, create my document files, and when everything is done, finished, i go and do the Package.
But at a certain point it crashes and the file becomes demaged... even the original one i've worked initially!!
This happens everytime...
Does anyone ever had this problem?
Need your help guys?
Thanks

This is not normal behavior. I wonder what is different for you.
If you deselect "Check Links Before Opening Document," you should not be prompted to "Do not Update Links." This suggest you have corrupt preferences. So try:
Trash, Replace, Reset, or Restore the application Preferences: http://forums.adobe.com/thread/526990

Problem when creating contract with foreign trade / customs

Hi,
I encountered a problem when creating contract / outline agreement.
I used ME31K to create a contract with a vendor outside of our country. I suppose that I should be able to see "Foreign Trade / Customs" in "Header" menu, but this entry is gray, I cannot enter it.
I tried to create a scheduling agreement using ME31L with the same vendor and material, I can see "Foreign Trade / Customs" information. I suppose these two process are similar, aren't they?
Btw., I checked the master data according to this thread:
http://help.sap.com/saphelp_46c/helpdata/en/ed/3b6cc697e711d1b4e20000e82d81b0/content.htm
Can anyone give me some hint?
Thanks!
Charlie

These two processes are different:
The Contract agreement or the Outline Agreement is that create the centrally contract (cross-plant) where it can maintain different pricing conditions for each and every plant. It creates the Release Order with reference to Outline Agreement. No detailed delivery schedule can be made in the Release Order. No Release documentation is created. Only time-dependent conditions can be created, Some Item Category 'M' and 'W' can be used.
Whereas the Scheduling Agreement is the Plant Location what must be entered in the Scheduling Agreement. Its no need to create any other purchasing document except for delivery schedule line via Transaction ME38 or MRP running (with the appropriate setting of Source List). Delivery Schedule line items are created subject to your specific requirement. It can create both Scheduling Agreement with or without release of Documentation (subject to the Document Type LP or LPA) with the selection of either FRC or JIT delivery schedule. Either time-dependent or time-independent conditions can be created subject to the customizing in the Document Type of the Scheduling Agreement. Item Category 'M' and 'W' can not be used.

Why does my screen keep flashing and then turn black when I use the marquee tool?

When I bring up a photo to work on and i try to draw circle or square with the Marquee tool my screen flashes black and then stays black until I use the move tool?

This issue is associated with your graphics driver not being compatible with PS' hardware acceleration. Updating the driver if possible would be advisable, otherwise turn off OpenGL drawing under Preferences --> Performance.
Mylenium

Divide layer into 4 quarters and trouble with marquee tool.

Help, please!!! Because I will be doing this often in the near future, I need to create an action to precisely divide a LAYER into 4 quarters, in order to easily create seamless patterns. I'm having trouble figuring out how to automate the placing of guides limited to the center points of the selected layer dimensions, as opposed to the entire image's dimensions. My second difficulty is in selecting the quarters; using the marquee tool, etc, the selection tool is NOT snapping to the guides, despite what I have the Snap To preferences set to. I need to select the pixels right up to the guide line so that I can select the "Make a new layer via cut" and then move the new layers in position to make a seamless tile. Right now, it is selecting a few pixels off. (Annoying!) So until I can figure out how to address these issues, I can't even begin to record an action. Even if I can't record a general action, due to the problem of different layers having different dimensions, I'd be happy to discover a shortcut to accurately quartering a layer and any advice as to why I'm having trouble managing the marquee tool. Maybe I'll get lucky and some kind soul will have already created and be willing to share something to solve this problem I'm currently trying out the CS6 Beta but usually work in either CS5 or PSE 9. For those of you who respond, thanks in advance!

If you want to give a Script a try, paste the following text into a new file in ExtendScript Toolkit (part of Photoshop’s installation, Applications/Utilities/Adobe Utilities/ExtendScript Toolkit CS4 or /Applications/Utilities/Adobe Utilities-CS5/ExtendScript Toolkit CS5) and save it as a jsx-file into Photoshop’s Presets/Scripts-folder.
After restarting Photoshop the Script should be available under File > Scripts and can be assigned a Keyboard Shortcut directly, recorded into an Action, (in CS4 and CS5) be used in a Configurator-Panel or started from ExtendScript Toolkit directly.
// make 4 quadrant copiers of selected layer;
// 2012, use at your own risk;
#target photoshop
if (app.documents.length > 0) {
var myDocument = app.activeDocument;
var originalUnits = app.preferences.rulerUnits;
app.preferences.rulerUnits = Units.PIXELS;
var theLayer = myDocument.activeLayer;
var theBounds = theLayer.bounds;
var theWidth = theBounds[2] - theBounds[0];
var theHeight = theBounds[3] - theBounds[1];
// operation;
var hor = 0;
var ver = 0;
for (var m = 0; m < 4; m++) {
myDocument.activeLayer = theLayer;
// calculate stuff;
var left = theBounds[0] + (theWidth / 2 * hor);
var right = left + (theWidth / 2);
hor++;
if (hor == 2) {hor = 0};
var top = theBounds[1] + (theHeight / 2 * ver);
var bottom = top + (theHeight / 2);
if (String(m / 2).indexOf(".") != -1) {ver++};
// make selection;
var theArray = [[left, top], [right, top], [right, bottom], [left, bottom]];
myDocument.selection.select(theArray, SelectionType.REPLACE, 0, false);
// copy to layer;
var id14 = charIDToTypeID( "CpTL" );
executeAction( id14, undefined, DialogModes.NO );
myDocument.activeLayer.name = theLayer.name + "_" + String(m);
// reset;
app.preferences.rulerUnits = originalUnits;

Problems when someone shares with me it screen

I have a problem when someone shares his screen with me it happens only in my computer.
tried to clean the cache uninstall and install nothing shutdown the firewall nothing helps ....
Any idea ?
Thanks

Hello Sallo,
Issue seems to have occured in the past where it got fixed by removing kb2760556 KB2760512 one by one and after that installing them
again.
Is your machine Windows 7 machine with a home user interface like Aero theme enabled? can you move into Window 7 Basic version and give a try.
IIf we feel that its because of the patches , then we need to follow the methord of uninstalling patches one by and one and test the scenario each time
Sunilkumar

Problem when creating Database with Database, OS and hardware Configuraiton

Problem when creating Database:
There are two problems, which I faced during creation of database. When creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
Problem # 1:
When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
I searched following oracle help for this problem.
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Problem # 2:
When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
I searched following oracle help for this problem.
ORA-12571: TNS:packet writer failure
Cause: An error occurred during a data send.
Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Software & Hardware Configuration are as follow:
Software:
Database
Oracle 8.1.7.0.0 (Oracle8i)
Operating System
Microsoft Windows 2000
5.00.2195
Service Pack 2
Hardware:
x86 Family 6 Model 8 stepping
10
AT/AT COMPITABLE
260,400 KB RAM

user563502 wrote:
I am working on Solaris 8. What is Alert_SID.log? where can I find it?
ThanksFor the responsible of the upgrade of Oracle database, not even know what Alert log is?
to be honest with you, this is not your work.

When I use the marquee tool the photo starts flashing on and off?

Hi when I am using the marquee tool the photo keeps flashing on and off and turning black?

I am not sure what you are asking, or about what Adobe software.
This is the Adobe Reader forum; Adobe Reader does not handle images.

Problem when selecting ITunes File "ITunes Library.itl" cannot be read because it was created by a newer version of ITunes? Need help!

Issue when selecting ITunes - File reads "ITunes Library.itl" cannot be read because it was created by a newer version of ITunes.
1. Re-installed ITunes and problem still exist, and
2. Re-installed earlier version of ITTunes (10.3) problem still exist
Need help!

Finally (after extensive searching) found a solution for you my friend:
1) Open Finder,
2) On the top right search box enter .itl
3) Move to trash all the .itl Files you see then restart your iTunes, and your iTunes is back to you.
Hope this works buddy.

Itunes podcast problem when i sync. with my iphone 4

i downloads directly some podcasts on my iphone, so when i sync. with my itunes its deleting the new podcasts from my iphone ! ! ! i have to download it again.
even if i have choice ( dont sync. podcast, it will deleted it ?! if i choice sync. podcast so he will delete what i download on my iphone and but what i have in my library from itunes .......
any help ?

You can try deleting the iPod Photo Cache folder on your computer and then try to sync again. Read about it here.
http://support.apple.com/kb/TS1314

Problem when Selecting keyframes with marquee tool

Similar Messages

Maybe you are looking for