Problem when site loads

When I publish my site (html and swf), it appears correctly
in safari and explorer, but is way too small in firefox. What am I
doing wrong, and can someone please give me detailed instruction on
how to fix it?
Thanks!

need a link to look at it

Similar Messages

I have a problem when I loading application. It shown your payment method was declined due to last payment problem which I've already paid.

I have a problem when I loading application.
It shown your payment method was declined due to last payment problem
which I've already paid.

iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

Problem when start loading the SAP DB for TestDrive NW4 for Linux

Dear everyone,
I hav install the NW4 test drive which just released on last month, but I cant open the database. I m able to execute 'startsap nw4host'. but when it load half-way, on the step of opening sapdb, it faces problem..
Below is the log file from /sapmnt/home/nw4adm/startdb.log:
Mon Aug 1 21:48:06 MYT 2005
LOGFILE FOR STARTING DATABASE
Trying to start database ...
Mon Aug 1 21:48:06 MYT 2005
Checking required environment variables
SAPSYSTEMNAME is >NW4<
Start database with xuserkey >c<
Mon Aug 1 21:48:06 MYT 2005
Connect to the database to check the database state
dbmcli: connect check finished with return code: 0
Database not available
Mon Aug 1 21:48:06 MYT 2005
Starting XServer 12916
XSERVER Found other running x_server with version 'X32/LINUX 7.5.0 Build 010-121-066-665'
12902 XSERVER started, 'already...'
Mon Aug 1 21:48:06 MYT 2005
Starting database
Starting Database Instance...
OK
Opening Database...
ERR
-24895,ERR_SHUTDOWN: shutdown of database occured
-71,connection broken server state 6
Mon Aug 1 21:48:18 MYT 2005
Connect to the database to verify the database is now open
dbmcli check finished with return code: 0
Database start failed
Above is the content of log file.. hai, feel desperate to install it... Any solution or anything i din set properly?
Please advice.. Thanks a lot.
Cheers,
Isaac

in addition, my DB is MaxDB 7.5.. I download the iso (5 CDs) from Download section.
I install it in Linux Fedora Core 4.
Thanks and regards.
Cheers,
Isaac

HT204433 why is my claculator having problems when i load it on to the ibook author program

when i load in the calculator widget to my ipad the multiplications, addtion, subtraction, division and = buttons. didnt work. but the number pad works, is there a step to enable it?

iBooks Author: About HTML widget creation
The HTML widget in iBooks Author supports Dashboard widgets, which are HTML 5 packages with a .wdgt file extension. For example, the Calculator Dashboard widget that is part of OS X Lion works well in iBooks Author. It is located on your system at /Library/Widgets/Calculator.wdgt.
There are several editors that can create Dashboard widgets, including Dashcode, which is part of the OS X Developer Tools. Learn more about creating widgets with Dashcode.

Problem when down loading a simple report to Excel sheet

HI Frenz,
When I download a Simple report to excel , The Excel shows a blank column in between two column, which should not be the case.
Kindly let me know ASAP
Regards
Irfan

Hi,
Check out the below samle code
Download a report to excel with format (border, color cell, etc)
REPORT ZSIRI NO STANDARD PAGE HEADING.
* this report demonstrates how to send some ABAP data to an
* EXCEL sheet using OLE automation.
INCLUDE OLE2INCL.
* handles for OLE objects
DATA: H_EXCEL TYPE OLE2_OBJECT,        " Excel object
      H_MAPL TYPE OLE2_OBJECT,         " list of workbooks
      H_MAP TYPE OLE2_OBJECT,          " workbook
      H_ZL TYPE OLE2_OBJECT,           " cell
      H_F TYPE OLE2_OBJECT.            " font
TABLES: SPFLI.
DATA H TYPE I.
* table of flights
DATA: IT_SPFLI LIKE SPFLI OCCURS 10 WITH HEADER LINE.
*&   Event START-OF-SELECTION
START-OF-SELECTION.
* read flights
SELECT * FROM SPFLI INTO TABLE IT_SPFLI UP TO 10 ROWS.
* display header
ULINE (61).
WRITE: /     SY-VLINE NO-GAP,
          (3) 'Flg'(001) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
          (4) 'Nr'(002) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
          (20) 'Von'(003) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
          (20) 'Nach'(004) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
          (8) 'Zeit'(005) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP.
ULINE /(61).
* display flights
LOOP AT IT_SPFLI.
WRITE: / SY-VLINE NO-GAP,
           IT_SPFLI-CARRID COLOR COL_KEY NO-GAP, SY-VLINE NO-GAP,
           IT_SPFLI-CONNID COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP,
           IT_SPFLI-CITYFROM COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP,
           IT_SPFLI-CITYTO COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP,
           IT_SPFLI-DEPTIME COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP.
ENDLOOP.
ULINE /(61).
* tell user what is going on
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
     EXPORTING
*           PERCENTAGE = 0
           TEXT       = TEXT-007
       EXCEPTIONS
            OTHERS     = 1.
* start Excel
CREATE OBJECT H_EXCEL 'EXCEL.APPLICATION'.
* PERFORM ERR_HDL.
SET PROPERTY OF H_EXCEL 'Visible' = 1.
* CALL METHOD OF H_EXCEL 'FILESAVEAS' EXPORTING #1 = 'c:\kis_excel.xls'
* PERFORM ERR_HDL.
* tell user what is going on
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
     EXPORTING
*           PERCENTAGE = 0
           TEXT       = TEXT-008
       EXCEPTIONS
            OTHERS     = 1.
* get list of workbooks, initially empty
CALL METHOD OF H_EXCEL 'Workbooks' = H_MAPL.
PERFORM ERR_HDL.
* add a new workbook
CALL METHOD OF H_MAPL 'Add' = H_MAP.
PERFORM ERR_HDL.
* tell user what is going on
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
     EXPORTING
*           PERCENTAGE = 0
           TEXT       = TEXT-009
       EXCEPTIONS
            OTHERS     = 1.
* output column headings to active Excel sheet
PERFORM FILL_CELL USING 1 1 1 'Flug'(001).
PERFORM FILL_CELL USING 1 2 0 'Nr'(002).
PERFORM FILL_CELL USING 1 3 1 'Von'(003).
PERFORM FILL_CELL USING 1 4 1 'Nach'(004).
PERFORM FILL_CELL USING 1 5 1 'Zeit'(005).
LOOP AT IT_SPFLI.
* copy flights to active EXCEL sheet
    H = SY-TABIX + 1.
    PERFORM FILL_CELL USING H 1 0 IT_SPFLI-CARRID.
    PERFORM FILL_CELL USING H 2 0 IT_SPFLI-CONNID.
    PERFORM FILL_CELL USING H 3 0 IT_SPFLI-CITYFROM.
    PERFORM FILL_CELL USING H 4 0 IT_SPFLI-CITYTO.
    PERFORM FILL_CELL USING H 5 0 IT_SPFLI-DEPTIME.
ENDLOOP.
* changes by Kishore - start
* CALL METHOD OF H_EXCEL 'Workbooks' = H_MAPL.
CALL METHOD OF H_EXCEL 'Worksheets' = H_MAPL." EXPORTING #1 = 2.
PERFORM ERR_HDL.
* add a new workbook
CALL METHOD OF H_MAPL 'Add' = H_MAP EXPORTING #1 = 2.
PERFORM ERR_HDL.
* tell user what is going on
SET PROPERTY OF H_MAP 'NAME' = 'COPY'.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
     EXPORTING
*           PERCENTAGE = 0
           TEXT       = TEXT-009
       EXCEPTIONS
            OTHERS     = 1.
* output column headings to active Excel sheet
PERFORM FILL_CELL USING 1 1 1 'Flug'(001).
PERFORM FILL_CELL USING 1 2 0 'Nr'(002).
PERFORM FILL_CELL USING 1 3 1 'Von'(003).
PERFORM FILL_CELL USING 1 4 1 'Nach'(004).
PERFORM FILL_CELL USING 1 5 1 'Zeit'(005).
LOOP AT IT_SPFLI.
* copy flights to active EXCEL sheet
    H = SY-TABIX + 1.
    PERFORM FILL_CELL USING H 1 0 IT_SPFLI-CARRID.
    PERFORM FILL_CELL USING H 2 0 IT_SPFLI-CONNID.
    PERFORM FILL_CELL USING H 3 0 IT_SPFLI-CITYFROM.
    PERFORM FILL_CELL USING H 4 0 IT_SPFLI-CITYTO.
    PERFORM FILL_CELL USING H 5 0 IT_SPFLI-DEPTIME.
ENDLOOP.
* changes by Kishore - end
* disconnect from Excel
*      CALL METHOD OF H_EXCEL 'FILESAVEAS' EXPORTING #1 = 'C:\SKV.XLS'.
FREE OBJECT H_EXCEL.
PERFORM ERR_HDL.
*       FORM FILL_CELL                                                *
*       sets cell at coordinates i,j to value val boldtype bold       *
FORM FILL_CELL USING I J BOLD VAL.
CALL METHOD OF H_EXCEL 'Cells' = H_ZL EXPORTING #1 = I #2 = J.
PERFORM ERR_HDL.
SET PROPERTY OF H_ZL 'Value' = VAL .
PERFORM ERR_HDL.
GET PROPERTY OF H_ZL 'Font' = H_F.
PERFORM ERR_HDL.
SET PROPERTY OF H_F 'Bold' = BOLD .
PERFORM ERR_HDL.
ENDFORM.
*&      Form ERR_HDL
*       outputs OLE error if any                                       *
* --> p1        text
* <-- p2        text
FORM ERR_HDL.
IF SY-SUBRC <> 0.
WRITE: / 'Fehler bei OLE-Automation:'(010), SY-SUBRC.
STOP.
ENDIF.
ENDFORM.                    " ERR_HDL
Cheers,
Chandru

SQL LOADER Problem when data is loaded but not come in standard formate

Hi guys,
I got problem when sql loader run data loaded successfully in table but UOM data not come in standard formate.
UOM table column contains the Unit of measure data but in my excel sheet it's look like :
EXCEl SHEET DATA:
1541GAFB07080          0     Metres
1541GAFE10040          109.6     Metres
1541GAFE10050          594.2     Metres
1541GAFE10070          126.26     Metres
1541GAFE14040          6.12     Metres
1541GAFE14050          0     Metres
1541SAFA05210          0     Metres
1541SAFA07100          0     Metres
1551EKDA05210          0     Nos
1551EKDA07100          0     Nos
1551EKDA07120          0     Nos
1551EKDA07140          0     Nos
1551EKDA07200          0     Nos.
1551EKDA08160          0     Nos.
1551EKDA08180          0     Nos.
1551EKDA08200          0     Nos.
1551EKDA10080          41     Nos.
1551EKDA10140          85     Nos.
.ctl file :
OPTIONS (silent=(header,feedback,discards))
LOAD DATA
INFILE *
APPEND
INTO TABLE XXPL_PO_REQUISITION_STG
FIELDS TERMINATED BY ','
OPTIONALLY ENCLOSED BY'"'
TRAILING NULLCOLS
( ITEM_CODE CHAR,
ITEM_DESCRIPTION CHAR "TRIM(:ITEM_DESCRIPTION)",
QUANTITY,
UOM,
NEED_BY_DATE,
PROJECT,
TASK_NAME,
BUYER,
REQ_TYPE,
STATUS,
ORGANIZATION_CODE,
LOCATION,
SUBINVENTORY,
LINE_NO,
REQ_NUMBER,
LOADED_FLAG CONSTANT 'N',
SERIAL_NO "XXPL_PRREQ_SEQ.NEXTVAL",
CREATED_BY,
CREATION_DATE SYSDATE,
LAST_UPDATED_BY,
LAST_UPDATED_DATE,
LAST_UPDATED_LOGIN
Some output came in table like:
W541WDCA05260 0 Metres|
W541WDCA05290 3 Metres|
W541WDCA05264 4 Metres|
W541WDCA05280 8 Metres|
1551EADA04240 0 Nos|
1551EADA07100 0 Nos|
1551EKDA10080 0 Nos.|
1551EKDA10080 41 Nos.|
proble in | delimiter...how to remove it ' | ' from my table when sqlloader program runnig ...... where i can change in .ctl file or excel file....it's urgent guys olz help me ..
thanks

Hi,
How are you extracting the data to Excel sheet ?
Please check the format type of the column in Excel sheet for UOM.
There is no issue in the SQL loader control file, but issue is there in your source excel file. (Try using a different method to extract the data to Excel sheet.)
Regards,
Yuvaraj.C

Problem in the load, all data skipped

Hello,I have a problem when I load data, the message (WARNING) is:"Aggregate storage applications ignore update to derived cells. [209774] cells skipped"All my data are skipped, and this is the only message I have, I do not have any errors in my *.err file. Does this mystery can be explain?

Are you sure you're not trying to load to a non-level 0 member in one of your dimensions? Unlike a block storage database all AS data must be loaded at level 0.Mark Rixonwww.analitica.co.uk

Weird internet problem / ssl connection error, site loads in safari not in firefox or other way around

I really can't figure out this problem. Search the internet tried all kinds of things, nothing help so far.
I have a Macbook Pro (Lion originally installed) running on Mavericks (all latest updates). SSD installed and the DVD tray is replaced by the original HDD.
The laptop wasn't running very smooth anymore so decided to give it a fresh Mavericks install (even though I know it's not really necessary for mac, it helped, everything is much faster except a weird internet problem came up).
After freshly installing Mavericks I couldn't get into my google account anymore, just wouldn't load. Tried Safari (use this normally) and Firefox and Chrome, this last was gave a SSL connection error, both Safari and FF said the website couldn't be loaded because the server didn't respond. For Gmail I use Mailplane which is just stuck on a white page. I tried repairing the keychain, repaired disk and disk permissions, cleaned browsers, turned off firewall and antivirus (Shopos) started in safe mode, checked time settings which were all good. Nothing of this helped. I even ended up creating a usb bootdisk for Mavericks, formatted the disk and reinstalled from the start just Mavericks and nothing else, started Safari, still the same problem. As even this didn't help I figured it's not worth reinstalling all software so put back my backup.
Now I ended up somehow only being able to use Gmail normally in Firefox, Chrome still gives SSL error and Safari can load the inbox, but I can't open any messages. I get the error there is a problem with the connection. If I try in Basic HTML mode it surprisingly does work.
You would say, just use Firefox, finished...but the thing is that sometimes random websites won't load in Firefox, when I load the same site in Safari it works perfectly.
O yes, I also tried the connect to my iPhone and use the Cellular data network, then it's no problem using Gmail in Safari normally. You would say it's a router problem, but I have another Macbook Pro (just one model later running Mountain Lion) this one works perfectly with every browser. Also my iPhone does everyting logged into the WiFi network.
You can understand I really have no clue what's going on here, I don't see any logic. I can only think of a hardware problem in my Macbook, but don't see how that could cause these problems.
I hope someone is ably to help me ?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Afterf vs 6 upgrade. my outlook exchange site loads, but can't maneuver...when I click on something it locks up showing an error with java...can't read all as it locks

after vs 6 upgrade. my outlook exchange site loads, but can't maneuver within page. when I click on something it won't move, but locks up and an error message comes up mentioning java problem...but can't read it all as the page is locked. needs to x out and reload.
its the web page version of outlook exchange. there may also be a couple of other sites..after it loads, can't click on anything..no response....checked for latest version of java...and it verified I have latest.
never happended before

Whaoo,
Looks like all I needed to do was ask the question and I would answer it.
It is definitely the outlook 2013 calendar item that had the new status. Even though I changed the item to a valid status, I needed to completely remove the item and add it back in with a valid legacy status from the start.
-The Steve

Partial page load problem when using Muse in an existing non-Muse Masterpage; how to issue a jquery

Partial page load problem when using Muse in an existing non-Muse Masterpage; how to issue a jquery args.get_isPartialLoad().
My page is loaded into a palcehold within the Ajax update panel within the current Masterpage, so page loadload doesn't occur. But if my Muse page can capture the partial pageload then I can tell jquery to run the Muse formating routine.

Jackie, I am having the same issue and agree that it obscures our site analytics.
I only have the "WebMarketing" subscription - so I cannot see how often people visit my site (unless I just dont know how to view that). Here is a screen shot of how many different locations I have and how much it affects my site visitor count based on the other locations which seem "legit" because they have more page views than visits.
I hope there is a way to fix or block this.

I clicked on Firefox's "save password" on a blogsite, now I can't "comment" on that site, I'm caught in a loop, keep getting logged out of that site when I try to comment, but not a problem when I try Explorer.

When I navigate to the page to view comments and leave a comment myself, the comments appear but the link to leave a comment is missing, and my username and password is pre-populated in those fields (presumable by the Firefox "save password" program)on that "comment" page. When I click "submit" to log in again, I am logged in but redirected back to the front page. When I click on the page that allows me to leave a comment, I get kicked out again. I'm caught in a loop.
I do not have this problem when I exit Firefox and open Internet Explorer and go to that blog site, although the username and password fields are automatically populated when I type the first digit of my username, probably because Firefox is still operating in the background on my computer.
I tried clearing two hours of recent history, as that was the timeline when I clicked on "Save Password" from the pop up box, but it didn't help.

You can find the links to download the Flash plugin for Windows at the bottom of this page:<br />
Adobe - Common Flash Player download and installation issues (Windows): http://www.adobe.com/products/flashplayer/support/index.html
Go to: 3. Download Adobe Flash Player

Youtube videos I placed in a site made in Muse, don't have sound and don't auto play in my Android phone. Can anyone tell me why? The same video has no problems when I watch it at the youtube site on my phone. It has sound on an iphone, but doe

Hello. The Youtube videos I placed in a site made in Muse, don't have sound and don't auto play in my Android phone. Can anyone tell me why? The same video has no problems when I watch it at the youtube site on my phone. It has sound on an iphone, but doesn't auto play either. Thanks!

Hi Mariana,
Please make sure you have the autoplay checkbox selected from the fly-out options:
Regards,
Akshay

Problem when load more swf files work with xml files into my movie

hi ;
I have one flash file & more of swf files which work with xml files .
when I load one swf file into my flash file and remove it and load anther one on the same movieclip in my flash file it load the old swf file.
when i load one on movieclip and remove it and load anther swf on anther movieclip the file doesn`t work and stoped.
when test my flash file to load and remove swf files without xml file it work fine but when repleaced the swf files with other work with xml files the problem hapend.
thanks;

YOu should trace the names of the files that are being targeted for loading to see if they agree with what you expect. If you want help with the coding you will need to show the code that is relevant to your problem (not all of it)

Problems with Safari Loading Sites and Photos

For the past week (Feb. 2015) I've experience problems with Safari loading websites on my 2009 20" iMac desktop. Running version OSX Lion 10.7.3 4 GB. Intel Duo Core 2.66 GHz
Mac also will frequently not upload photos at websites like Yahoo News or Facebook. It does this throughout the day.
So, I downloaded Chrome, thinking it would be a better browser if Safari is not functioning. Chrome is just slightly better, and when it won't load a website I get the following error message from Chrome: DNS_PROBE_FINISHED_NO_INTERNET.
I'm debating taking the Mac to the Apple store for diagnosis or repair today, but if anyone else is experiencing similar problems, could you please offer some solutions as to what is going on.
Thank you.
AngieRK

Non-responsive DNS server or invalid DNS configuration can cause long delay before webpages load - Apple Support
Unless you have a good reason not to, you should update the OS to version 10.7.5.

GenericServiceFactory initialization problem when trying to load Web servic

Hi,
I am making a Guided procedure that calls a webservice. I have created a new Destination Template and was able to load the webservice definition successfully, but when I test the callable object I created for that same webservice y get the error:
GenericServiceFactory initialization problem when trying to load Web service model for WSDL.
Somehow I think there is something wrong with the user authentication. The Destination template has a user and password but somehow I think the callable object test is not using this information at all.
Can anyone help ?
Thanks in advance

Hi Hans,
Have you verified if you can call any external web service calls from your J2EE engine? Go into the SOA Management / Global settings (if you are on CE - if you're on 7.0 it's in manage WS desintations).
Look at your proxy settings and set them like your web browser that enables external calls. For example, in the SAP network I set my global proxy settings on my local J2EE engine to be:
Proxy host: proxy
Proxy port: 8080
Exclude list: *.sap.corp
Does that make sense - have you verified if your settings are correct for your company?
Regards
Ginger

Problem when site loads

Similar Messages

Maybe you are looking for